Update to upstream flashrom (post v1.2) commit 4d3657b4:
Add support for Comet Lake-U/400-series PCH
kgpe-d16 patch from flashrom 1.2 still applies cleanly.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Set the kernel video mode for the internal display to 1080p,
as the native panel resolution of 2160p is difficult to read.
A recent update to fbwhiptail allows the GUI to make use of the
scaled resolution as well, provided it is set via kernel param.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* musl-cross: remove old patch artifact of the musl-cross era
* CircleCI: do not produce hash digest for musl-cross-make patches (artifact was for musl-cross, not musl-cross-make)
Update_checksum was already changing files in /boot, befor checking for
gpg card. If no card is present, the user will end up in the recovery
next time instead of getting the same dialog again. Therefore, the
confirm_gpg_card should be checked before altering files.
The dead -u flag/$update_counter is used to mark the necessisty to
update the hash files now.
* patches/coreboot-4.12: add cross-compiler support patch
Ported from coreboot-4.8.1, re-exported via `git diff`
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* modules/coreboot: use musl-cross-make to build
revert toolchain bits to pre-4.12 addition
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* config/coreboot-librem_mini: use CONFIG_ANY_TOOLCHAIN
Needed since coreboot 4.12 now built with musl-cross-make
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
There's only one Librem Mini board, it doesn't use a TPM,
no reason to unnecesarily lengthen the board name.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Currently, exiting the recovery shell results in a kernel panic,
necessitating a hard reset / power cycle. As this is less than ideal,
drop the exec and add a loop to restart the shell.
Addresses issue #833
Tested under qemu-coreboot-fbwhiptail
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* CircleCI: readd librem_mini while making sure that if a board build fails, all logfile modified in the last minute are outputted on the CircleCI console prior to really failing and exiting
* librem_mini-NoTPM: addition of board config, distinctive coreboot config (required per Heads build system) to construct a ROM without TPM requirement.
* librem_mini: deletion of board and coreboot relative config, keeping librem_mini-NoTPM and coreboot config only. Removed librem_mini board build under CircleCI, keeping only librem_mini-NoTPM
Command returns a list of utilities found. This can happen if multiple
coreboot folders are present.
Use only one to fix a crash in the following lines.
Test: Being able to extract blobs when two coreboot folders are present,
both containing an IFDTOOL.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
* patches/coreboot-4.12: Add patch for Cannonlake ME status
Add patch print ME status regardless of enablement state
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* modules: add purism-blobs module
Rather than require users to manually run a script to download the required
blobs to build Purism Librem boards, automate it so the correct version
is automatically downloaded/extracted. Restrict to coreboot 4.12 for now
since 4.8.1 still needs FSP blobs, which are not in module.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* configs/linux-librem13v2: unset CONFIG_RETPOLINE
Fixes compilation issue with newer kernels, ignored by older ones
which don't need it
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* Add new board: Librem Mini
Add Librem Mini board patch for coreboot 4.12, board config and
coreboot config. Continue reusing existing librem13v2 Linux config,
same as all other Librem boards currently. Use new purism-blobs module.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* board/librem*: rename for consistency
Use 'librem_<board>' notation for consistency across all models.
Rename linux config file since used by multiple Librem models.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* CircleCI: add librem_mini board to test
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Changing the default boot was failing because remove the old entries did
not work as `rm "/some/path/*.txt"` does not work as intended, e.g. the
asterisk is no catch-all.
Some grub configs/bls entries contain the full paths to the
kernel/initrd files, which the parsers currently fail to handle,
causing a failed boot without any useful error being presented to the user.
To fix this, strip the bootdir prefix from the menu entries when parsing,
should it exist.
Test: build/boot Librem 13v2 w/F32 and bls entries containing absolute paths.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* modules/linux: Add support for multiple kernel versions
Follow same pattern as used for coreboot. Add existing kernel version
as default for all existing boards.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* modules/linux: Add option to use 4.19 LTS kernel
Add option to use kernel 4.19.139 (current LTS version).
Duplicate existing patches from 4.14.62 as they all apply cleanly.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
* CircleCI: debian:10 docker based. Give possitility to override CACHE_VERSION through CircleCI when needed
* Makefile: fix#799 with implementation of @osresearch's recommended https://github.com/osresearch/heads/issues/799#issuecomment-673059028
* modules/coreboot : indentation fix and putting version hashes together to facilitate future maintainership.
Add version and hash for coreboot and coreboot-blobs modules.
Adjust to use own toolchain, fix blobs path and extraction depth.
Test: build Librem 13v4 using both coreboot 4.8.1 and coreboot 4.12
(after adjusting board defconfig), verify correct toolchains used to
build each, and that teh result is a bootable ROM.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
As part of migration to coreboot 4.12, which includes measured boot
without additional patches, measure all parts of the firmware and the
payload into PCR2.
The same is done in coreboot 4.12. This commit ensures that boards not
migrated yet will show the same behaviour.
TODO: Update heads-wiki.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
CircleCI: two cache save/restore mechanisms. One bound to musl-cross+patches, one for modules + patches.
* Replacing the generic cache bound to CircleCI user to have two caches levels. One for musl-cross and its patchsets, one for all modules and their patchset being the same. So if modules changed, we use the cache for musl-cross as a fallback to economize one hour of precious build time out of two, while most of Heads changes are on the scripts and can be built on top of packages+patches cache
When a new /boot device is selected, wait until after
successfully mounting the newly-selected device before
updating CONFIG_BOOT_DEV.
Also, don't assume /boot already mounted, as this can cause
a false failure and prevent mounting of the newly-selected device.
Lastly, tidy up the error output in case mounting /boot fails.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Using 'let' in these scripts fails when evaluating to zero
for some reason, so replace with '$(())' which works as intended.
Test: Boot device selection menu shown properly when
new/unpartitioned drive installed.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
This patch was reported by @bemoody in issue #699
Tested via `BOARD=x230-hotp-verification` on a Thinkpad x230
Signed-off-by: alex-nitrokey <alex@nitrokey.com>
Attempting to reset the TPM when once isn't present causes a kernel
panic, so let's not allow users to do that.
Test: verify 'No TPM Detected' shown on Librem Mini when Reset TPM
option selected from menu.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Update to nitrokey-hotp-verification master (c0956cf) and drop
existing patch which is no longer needed.
Test: clean build for Librem 13v2
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
