Thierry Laurion
d9ad27f372
boards FLASH_OPTIONS: add --noverify. No point verifying flash with internal programmer?
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-10-29 08:58:09 -04:00
Thierry Laurion
9b101f1454
flash.sh: FLASHROM_OPTIONS->FLASH_OPTIONS: require FLASH_OPTIONS to specify flash program in board configs
...
- boards: switch flashrom->flashprog, FLASH_OPTIONS: flashprog memory --progress --programmer internal
TODO: check, Might break:
- xx20 : x220/t420/t520: used hwseq: verify compat
- legacy : not sure --ifd bios are support: verify compat (and drop, future PR drop legacy boards anyway...)
- talos: linux_mtd is used: verify compat
Tested:
- x230 works with awesome progress bar on read, erase and write.
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-10-29 08:58:09 -04:00
Thierry Laurion
2bf173c59a
add flashprog support: failed attempt to use review.sourcearcade.org for tarballs download
...
- Add Makefile new app dep verification
- Add modules/flashprog pointing to review.sourcearcade.org: website faisl to produce reproducible tarballs.
Notes:
- Unfortunately, we cannot use review platform to renerate reproducible tarballs, those don't have the same checksum on each download:
user@heads-tests-deb12-nix:~/heads$ wget https://review.sourcearcade.org/changes/flashprog~72991/revisions/5/archive?format=tgz -O test.tar.gz
--2024-08-31 09:38:14-- https://review.sourcearcade.org/changes/flashprog~72991/revisions/5/archive?format=tgz
Resolving review.sourcearcade.org (review.sourcearcade.org)... 88.99.35.89
Connecting to review.sourcearcade.org (review.sourcearcade.org)|88.99.35.89|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/x-gzip]
Saving to: ‘test.tar.gz’
test.tar.gz [ <=> ] 508.19K 225KB/s in 2.3s
2024-08-31 09:38:18 (225 KB/s) - ‘test.tar.gz’ saved [520389]
user@heads-tests-deb12-nix:~/heads$ sha256sum test.tar.gz
af2fb823c2699d37db284c1b3066352a59446b7ea491a585df4eeaa25d932a29 test.tar.gz
user@heads-tests-deb12-nix:~/heads$ sha256sum test.tar.gz
af2fb823c2699d37db284c1b3066352a59446b7ea491a585df4eeaa25d932a29 test.tar.gz
user@heads-tests-deb12-nix:~/heads$ wget https://review.sourcearcade.org/changes/flashprog~72991/revisions/5/archive?format=tgz -O test.tar.gz
--2024-08-31 09:38:37-- https://review.sourcearcade.org/changes/flashprog~72991/revisions/5/archive?format=tgz
Resolving review.sourcearcade.org (review.sourcearcade.org)... 88.99.35.89
Connecting to review.sourcearcade.org (review.sourcearcade.org)|88.99.35.89|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/x-gzip]
Saving to: ‘test.tar.gz’
test.tar.gz [ <=> ] 508.22K 855KB/s in 0.6s
2024-08-31 09:38:38 (855 KB/s) - ‘test.tar.gz’ saved [520417]
user@heads-tests-deb12-nix:~/heads$ sha256sum test.tar.gz
9225002d508bd8e2fc42a2bdcd0741cb93ed2cfc811fcd7e03b0242205d4954b test.tar.gz
user@heads-tests-deb12-nix:~/heads$ wget https://review.sourcearcade.org/changes/flashprog~72991/revisions/5/archive?format=tgz -O test.tar.gz
--2024-08-31 09:38:43-- https://review.sourcearcade.org/changes/flashprog~72991/revisions/5/archive?format=tgz
Resolving review.sourcearcade.org (review.sourcearcade.org)... 88.99.35.89
Connecting to review.sourcearcade.org (review.sourcearcade.org)|88.99.35.89|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/x-gzip]
Saving to: ‘test.tar.gz’
test.tar.gz [ <=> ] 508.18K 367KB/s in 1.4s
2024-08-31 09:38:45 (367 KB/s) - ‘test.tar.gz’ saved [520378]
user@heads-tests-deb12-nix:~/heads$ sha256sum test.tar.gz
ebdb7ac0c964178bc312d50547cc7ec82c1c5ffb7d04167fe0ac83deca94ee81 test.tar.gz
- Github mirror is only for commited code. Will have to work around that somehow : https://github.com/SourceArcade/flashprog
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-10-29 08:58:09 -04:00
Thierry Laurion
83707c7631
Optiplex boards: add HOTP variants, unify against x230-*-maximized board config formats
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-10-15 09:50:14 -04:00
Thierry Laurion
4496d1bf1e
Optiplex 7010/9010 SFF: add ifd.bin from libreboot's t16650 in tree, change optiplex_blobs.mk target and point coreboot config to this IFD
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-10-15 09:50:14 -04:00
Thierry Laurion
23cee75efd
boards/optiplex-7010_9010_TXT-maximized: add new TXT board, poitn coreboot to blobs, add to CI
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-10-15 09:50:14 -04:00
Thierry Laurion
8cf7d49fe8
Dell Optiplex 7019/9010 SFF inclusion based on coreboot master 24.02.01 for now
...
- CircleCI: add build based on coreboot 24.02.01 release (might be old but unclear to my eyes now)
- Add board non-HOTP board config as a start, reuse x230 linux config
- Add coreboot config modified ans saved theourh coreboot Makefile file helper
Next steps
- Create blobs extraction scripts automating https://docs.dasharo.com/variants/dell_optiplex/initial-deployment/#firmware-preparation
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-10-15 09:50:14 -04:00
Thierry Laurion
3574e12be9
board configs: remove CONFIG_BOOT_DEV so detect_boot_device detects it prior of oem-factory-reset usage
...
repro:
sed -i '/CONFIG_BOOT_DEV/d' boards/*/*.config unmaintained_boards/*/*.config
qemu debug trace on preinstalled OS:
[ 3.999725] [U] hello world
[ 4.286215] DEBUG: Debug output enabled from board CONFIG_DEBUG_OUTPUT=y option (/etc/config)
[ 4.315239] TRACE: Under init
[ 4.369379] DEBUG: Applying panic_on_oom setting to sysctl
[ 4.588333] TRACE: /bin/cbfs-init(5): main
[ 4.728310] TRACE: /bin/cbfs-init(24): main
[ 4.867039] DEBUG: TPM: Will extend PCR[7] with hash of filename /.gnupg/pubring.kbx
[ 4.946757] TRACE: /bin/tpmr(788): main
[ 5.006987] DEBUG: TPM: Extending PCR[7] with hash 7ccf4f64044946cf4e5b0efe3d959f00562227ae
[ 5.068692] DEBUG: exec tpm extend -ix 7 -ic /.gnupg/pubring.kbx
[ 5.326365] DEBUG: TPM: Will extend PCR[7] hash content of file /.gnupg/pubring.kbx
[ 5.399511] TRACE: /bin/tpmr(788): main
[ 5.460618] DEBUG: TPM: Extending PCR[7] with hash 547ca343719d3aa62af4763357d8c10cb35eae55
[ 5.524608] DEBUG: exec tpm extend -ix 7 -if /.gnupg/pubring.kbx
[ 5.752340] TRACE: /bin/cbfs-init(24): main
[ 5.908677] DEBUG: TPM: Will extend PCR[7] with hash of filename /.gnupg/trustdb.gpg
[ 5.988169] TRACE: /bin/tpmr(788): main
[ 6.044996] DEBUG: TPM: Extending PCR[7] with hash 7236ea8e612c1435259a8a0f8e0a8f1f5dba7042
[ 6.101604] DEBUG: exec tpm extend -ix 7 -ic /.gnupg/trustdb.gpg
[ 6.371341] DEBUG: TPM: Will extend PCR[7] hash content of file /.gnupg/trustdb.gpg
[ 6.451878] TRACE: /bin/tpmr(788): main
[ 6.511948] DEBUG: TPM: Extending PCR[7] with hash 4697c489f359b40dd8aec55df52a33b1f580a3df
[ 6.572785] DEBUG: exec tpm extend -ix 7 -if /.gnupg/trustdb.gpg
[ 6.879519] TRACE: /bin/key-init(6): main
[ 8.239618] TRACE: Under /etc/ash_functions:combine_configs
[ 8.323781] TRACE: Under /etc/ash_functions:pause_recovery
!!! Hit enter to proceed to recovery shell !!!
[ 8.572855] TRACE: /bin/setconsolefont.sh(6): main
[ 8.631296] DEBUG: Board does not ship setfont, not checking console font
[ 8.887295] TRACE: /bin/gui-init(641): main
[ 8.920627] TRACE: /etc/functions(715): detect_boot_device
[ 9.251212] TRACE: /etc/functions(682): mount_possible_boot_device
[ 9.312602] TRACE: /etc/functions(642): is_gpt_bios_grub
[ 9.410830] TRACE: /dev/vda1 is partition 1 of vda
[ 9.540007] TRACE: /etc/functions(619): find_lvm_vg_name
[ 9.707187] TRACE: Try mounting /dev/vda1 as /boot
[ 9.766843] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.825028] TRACE: /bin/gui-init(319): clean_boot_check
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-09-09 10:35:03 -04:00
Thierry Laurion
501419b2b7
qemu-coreboot-whiptail-tpm2 board: reenable DEBUG + TRACING
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-09-09 09:06:37 -04:00
Thierry Laurion
77d4be1dc6
TPM extend ops: Augment output of TPM1/TMP22 for filename and file content hash ops
...
Debug logtrace, screenshots of non-debug will be added in PR #1758
TPM1:
[ 4.815559] [U] hello world
[ 5.099000] DEBUG: Debug output enabled from board CONFIG_DEBUG_OUTPUT=y option (/etc/config)
[ 5.122059] TRACE: Under init
[ 5.165917] DEBUG: Applying panic_on_oom setting to sysctl
[ 5.388757] TRACE: /bin/cbfs-init(5): main
[ 5.516637] TRACE: /bin/cbfs-init(24): main
[ 5.662271] DEBUG: TPM: Will extend PCR[7] with hash of filename /.gnupg/pubring.kbx
[ 5.732223] TRACE: /bin/tpmr(790): main
[ 5.785372] DEBUG: TPM: Extending PCR[7] with hash 7ccf4f64044946cf4e5b0efe3d959f00562227ae
[ 5.838082] DEBUG: exec tpm extend -ix 7 -ic /.gnupg/pubring.kbx
[ 6.081466] DEBUG: TPM: Will extend PCR[7] hash content of file /.gnupg/pubring.kbx
[ 6.147455] TRACE: /bin/tpmr(790): main
[ 6.196545] DEBUG: TPM: Extending PCR[7] with hash ee79223a3b9724ad1aab290a3785132805c79eae
[ 6.251251] DEBUG: exec tpm extend -ix 7 -if /.gnupg/pubring.kbx
[ 6.445119] TRACE: /bin/cbfs-init(24): main
[ 6.585854] DEBUG: TPM: Will extend PCR[7] with hash of filename /.gnupg/trustdb.gpg
[ 6.659172] TRACE: /bin/tpmr(790): main
[ 6.707564] DEBUG: TPM: Extending PCR[7] with hash 7236ea8e612c1435259a8a0f8e0a8f1f5dba7042
[ 6.757645] DEBUG: exec tpm extend -ix 7 -ic /.gnupg/trustdb.gpg
[ 7.013547] DEBUG: TPM: Will extend PCR[7] hash content of file /.gnupg/trustdb.gpg
[ 7.082863] TRACE: /bin/tpmr(790): main
[ 7.131022] DEBUG: TPM: Extending PCR[7] with hash ca8898407cacd96d6f2de90ae90825351be81c62
[ 7.183344] DEBUG: exec tpm extend -ix 7 -if /.gnupg/trustdb.gpg
[ 7.413787] TRACE: /bin/key-init(6): main
[ 8.718367] TRACE: Under /etc/ash_functions:combine_configs
[ 8.803914] TRACE: Under /etc/ash_functions:pause_recovery
!!! Hit enter to proceed to recovery shell !!!
[ 9.045341] TRACE: /bin/setconsolefont.sh(6): main
[ 9.096853] DEBUG: Board does not ship setfont, not checking console font
[ 9.320494] TRACE: /bin/gui-init(641): main
[ 9.356729] TRACE: Under /etc/ash_functions:enable_usb
[ 9.445981] TRACE: /sbin/insmod(9): main
[ 9.609464] TRACE: /sbin/insmod(53): main
[ 9.660145] DEBUG: No module parameters, extending only with the module's content
[ 9.791896] DEBUG: TPM: Will extend PCR[5] hash content of file /lib/modules/ehci-hcd.ko
[ 9.860477] TRACE: /bin/tpmr(790): main
[ 9.914849] DEBUG: TPM: Extending PCR[5] with hash bc9ff28a99e314cda69695ba34b26ed0d8b1e4ed
[ 9.976867] DEBUG: exec tpm extend -ix 5 -if /lib/modules/ehci-hcd.ko
[ 10.146966] DEBUG: Loading /lib/modules/ehci-hcd.ko with busybox insmod
[ 10.184086] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.276564] TRACE: /sbin/insmod(9): main
[ 10.433503] TRACE: /sbin/insmod(53): main
[ 10.486272] DEBUG: No module parameters, extending only with the module's content
[ 10.620200] DEBUG: TPM: Will extend PCR[5] hash content of file /lib/modules/uhci-hcd.ko
[ 10.698710] TRACE: /bin/tpmr(790): main
[ 10.750637] DEBUG: TPM: Extending PCR[5] with hash bcb2f15c7eb52484072a76fc8a0d7399f6cf2189
[ 10.808379] DEBUG: exec tpm extend -ix 5 -if /lib/modules/uhci-hcd.ko
[ 10.996254] DEBUG: Loading /lib/modules/uhci-hcd.ko with busybox insmod
[ 11.026108] uhci_hcd: USB Universal Host Controller Interface driver
[ 11.040703] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 11.053129] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 11.061568] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 11.070973] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff00
[ 11.089004] hub 1-0:1.0: USB hub found
[ 11.097535] hub 1-0:1.0: 2 ports detected
[ 11.114890] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 11.123848] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 11.134989] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 11.142404] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000fee0
[ 11.153338] hub 2-0:1.0: USB hub found
[ 11.160572] hub 2-0:1.0: 2 ports detected
[ 11.176481] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.183898] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 11.193509] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 11.201574] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fec0
[ 11.211182] hub 3-0:1.0: USB hub found
[ 11.219256] hub 3-0:1.0: 2 ports detected
[ 11.314467] TRACE: /sbin/insmod(9): main
[ 11.468430] TRACE: /sbin/insmod(53): main
[ 11.521914] DEBUG: No module parameters, extending only with the module's content
[ 11.656647] DEBUG: TPM: Will extend PCR[5] hash content of file /lib/modules/ohci-hcd.ko
[ 11.726721] TRACE: /bin/tpmr(790): main
[ 11.778253] DEBUG: TPM: Extending PCR[5] with hash f563e46fbbed46423a1e10219953233d310792f5
[ 11.831718] DEBUG: exec tpm extend -ix 5 -if /lib/modules/ohci-hcd.ko
[ 12.010752] DEBUG: Loading /lib/modules/ohci-hcd.ko with busybox insmod
[ 12.044192] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 12.136462] TRACE: /sbin/insmod(9): main
[ 12.293409] TRACE: /sbin/insmod(53): main
[ 12.345947] DEBUG: No module parameters, extending only with the module's content
[ 12.481562] DEBUG: TPM: Will extend PCR[5] hash content of file /lib/modules/ohci-pci.ko
[ 12.547754] TRACE: /bin/tpmr(790): main
[ 12.604827] DEBUG: TPM: Extending PCR[5] with hash a24699fdaac9976cc9447fd0cd444a469299ad2f
[ 12.661256] DEBUG: exec tpm extend -ix 5 -if /lib/modules/ohci-pci.ko
[ 12.847247] DEBUG: Loading /lib/modules/ohci-pci.ko with busybox insmod
[ 12.870986] ohci-pci: OHCI PCI platform driver
[ 12.959387] TRACE: /sbin/insmod(9): main
[ 13.112275] TRACE: /sbin/insmod(53): main
[ 13.163112] DEBUG: No module parameters, extending only with the module's content
[ 13.291360] DEBUG: TPM: Will extend PCR[5] hash content of file /lib/modules/ehci-pci.ko
[ 13.364853] TRACE: /bin/tpmr(790): main
[ 13.438536] DEBUG: TPM: Extending PCR[5] with hash b80a90e11a01eba40bb7e566f3374d0aad326acb
[ 13.505500] DEBUG: exec tpm extend -ix 5 -if /lib/modules/ehci-pci.ko
[ 13.679865] DEBUG: Loading /lib/modules/ehci-pci.ko with busybox insmod
[ 13.704539] ehci-pci: EHCI PCI platform driver
[ 13.725570] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 13.735562] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 13.745092] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfcf80000
[ 13.773286] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 13.783544] hub 4-0:1.0: USB hub found
[ 13.791110] hub 4-0:1.0: 6 ports detected
[ 13.800844] hub 1-0:1.0: USB hub found
[ 13.807808] hub 1-0:1.0: 2 ports detected
[ 13.823094] hub 2-0:1.0: USB hub found
[ 13.829910] hub 2-0:1.0: 2 ports detected
[ 13.839182] hub 3-0:1.0: USB hub found
[ 13.846231] hub 3-0:1.0: 2 ports detected
[ 13.946297] TRACE: /sbin/insmod(9): main
[ 14.099143] TRACE: /sbin/insmod(53): main
[ 14.149765] DEBUG: No module parameters, extending only with the module's content
[ 14.291413] DEBUG: TPM: Will extend PCR[5] hash content of file /lib/modules/xhci-hcd.ko
[ 14.372815] TRACE: /bin/tpmr(790): main
[ 14.426919] DEBUG: TPM: Extending PCR[5] with hash 1fc55e846b9d5c93e58c6c8b6f867e744fa694bc
[ 14.482815] DEBUG: exec tpm extend -ix 5 -if /lib/modules/xhci-hcd.ko
[ 14.670419] DEBUG: Loading /lib/modules/xhci-hcd.ko with busybox insmod
[ 14.783374] TRACE: /sbin/insmod(9): main
[ 14.939364] TRACE: /sbin/insmod(53): main
[ 14.995136] DEBUG: No module parameters, extending only with the module's content
[ 15.135482] DEBUG: TPM: Will extend PCR[5] hash content of file /lib/modules/xhci-pci.ko
[ 15.204263] TRACE: /bin/tpmr(790): main
[ 15.255478] DEBUG: TPM: Extending PCR[5] with hash bbdd85242570aa438b908420a43b8d7042db8b4f
[ 15.305598] DEBUG: exec tpm extend -ix 5 -if /lib/modules/xhci-pci.ko
[ 15.480844] DEBUG: Loading /lib/modules/xhci-pci.ko with busybox insmod
[ 15.512476] xhci_hcd 0000:00:04.0: xHCI Host Controller
[ 15.528230] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 5
[ 15.540456] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[ 15.554225] hub 5-0:1.0: USB hub found
[ 15.562061] hub 5-0:1.0: 4 ports detected
[ 15.572058] xhci_hcd 0000:00:04.0: xHCI Host Controller
[ 15.589966] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 6
[ 15.598116] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed
[ 15.606150] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 15.616354] hub 6-0:1.0: USB hub found
[ 15.623767] hub 6-0:1.0: 4 ports detected
[ 15.909854] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 16.193548] usb 6-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 16.345381] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[ 17.674973] TRACE: /etc/functions(715): detect_boot_device
[ 17.718114] TRACE: /etc/functions(682): mount_possible_boot_device
[ 17.759829] TRACE: /etc/functions(642): is_gpt_bios_grub
[ 17.833271] TRACE: /dev/vda1 is partition 1 of vda
[ 17.925490] TRACE: /etc/functions(619): find_lvm_vg_name
[ 18.068352] TRACE: Try mounting /dev/vda1 as /boot
[ 18.114444] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.158648] TRACE: /bin/gui-init(319): clean_boot_check
[ 18.247883] TRACE: /bin/gui-init(348): check_gpg_key
[ 18.338052] TRACE: /bin/gui-init(185): update_totp
[ 18.419286] TRACE: /bin/unseal-totp(8): main
[ 18.511352] TRACE: /bin/tpmr(614): tpm1_unseal
[ 18.624811] DEBUG: Running at_exit handlers
[ 18.661992] TRACE: /bin/tpmr(390): cleanup_shred
[ 18.692897] !!! ERROR: Unable to unseal TOTP secret !!!
[ 21.295284] TRACE: /bin/unseal-totp(8): main
[ 21.386377] TRACE: /bin/tpmr(614): tpm1_unseal
[ 21.496183] DEBUG: Running at_exit handlers
[ 21.527060] TRACE: /bin/tpmr(390): cleanup_shred
[ 21.558625] !!! ERROR: Unable to unseal TOTP secret !!!
[ 24.162881] TRACE: /bin/unseal-totp(8): main
[ 24.249549] TRACE: /bin/tpmr(614): tpm1_unseal
[ 24.362331] DEBUG: Running at_exit handlers
[ 24.394154] TRACE: /bin/tpmr(390): cleanup_shred
[ 24.427400] !!! ERROR: Unable to unseal TOTP secret !!!
[ 26.475340] DEBUG: CONFIG_TPM: y
[ 26.521538] DEBUG: CONFIG_TPM2_TOOLS:
[ 26.578490] DEBUG: Show PCRs
[ 26.730805] DEBUG: PCR-00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 26.751488] PCR-01: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 26.778571] PCR-02: C0 A9 54 C8 45 5C 78 49 80 EC 1C DB D8 E8 9B CC 65 11 58 BF
[ 26.808771] PCR-03: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 26.830508] PCR-04: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 26.849538] PCR-05: 2C 3A 40 05 70 DB 21 89 4F CD C2 F8 D6 AE 40 DA 56 E1 B6 74
[ 26.878951] PCR-06: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 26.895421] PCR-07: 7A 8A 4C E6 BA B0 AA 26 22 B1 26 A2 F6 36 BD F3 86 23 50 B6
TPM2:
[ 5.305235] [U] hello world
[ 5.591175] DEBUG: Debug output enabled from board CONFIG_DEBUG_OUTPUT=y option (/etc/config)
[ 5.615802] TRACE: Under init
[ 5.657823] DEBUG: Applying panic_on_oom setting to sysctl
[ 5.831457] TRACE: /bin/tpmr(349): tpm2_startsession
[ 6.567984] TRACE: /bin/cbfs-init(5): main
[ 6.695758] TRACE: /bin/cbfs-init(24): main
[ 6.811665] TRACE: /bin/tpmr(832): main
[ 6.870411] DEBUG: TPM: Extending PCR[7] with /.gnupg/pubring.kbx
[ 6.907262] TRACE: /bin/tpmr(234): tpm2_extend
[ 6.983504] TRACE: /bin/tpmr(247): tpm2_extend
[ 7.037543] DEBUG: TPM: Will extend PCR[7] with hash of string /.gnupg/pubring.kbx
[ 7.192665] TRACE: /bin/tpmr(265): tpm2_extend
[ 7.246318] DEBUG: TPM: Extended PCR[7] with hash 96ab5053e4630a040d55549ba73cff2178d401d763147776771f9774597b86a1
[ 7.355327] TRACE: /bin/tpmr(832): main
[ 7.409042] DEBUG: TPM: Extending PCR[7] with /.gnupg/pubring.kbx
[ 7.446920] TRACE: /bin/tpmr(234): tpm2_extend
[ 7.485782] TRACE: /bin/tpmr(252): tpm2_extend
[ 7.540496] DEBUG: TPM: Will extend PCR[7] with hash of file content /.gnupg/pubring.kbx
[ 7.759033] TRACE: /bin/tpmr(265): tpm2_extend
[ 7.811693] DEBUG: TPM: Extended PCR[7] with hash f196f9cae98362568d31638e7522eee5042286b2c18627b06b30a0275207872e
[ 7.903033] TRACE: /bin/cbfs-init(24): main
[ 8.026099] TRACE: /bin/tpmr(832): main
[ 8.077074] DEBUG: TPM: Extending PCR[7] with /.gnupg/trustdb.gpg
[ 8.108061] TRACE: /bin/tpmr(234): tpm2_extend
[ 8.180580] TRACE: /bin/tpmr(247): tpm2_extend
[ 8.234748] DEBUG: TPM: Will extend PCR[7] with hash of string /.gnupg/trustdb.gpg
[ 8.412522] TRACE: /bin/tpmr(265): tpm2_extend
[ 8.469868] DEBUG: TPM: Extended PCR[7] with hash 53b843fe9bb52894d3a7d00197c776d56f3059f6a285124c7916724cd5013b0b
[ 8.596316] TRACE: /bin/tpmr(832): main
[ 8.655651] DEBUG: TPM: Extending PCR[7] with /.gnupg/trustdb.gpg
[ 8.690508] TRACE: /bin/tpmr(234): tpm2_extend
[ 8.723206] TRACE: /bin/tpmr(252): tpm2_extend
[ 8.782554] DEBUG: TPM: Will extend PCR[7] with hash of file content /.gnupg/trustdb.gpg
[ 8.999969] TRACE: /bin/tpmr(265): tpm2_extend
[ 9.066744] DEBUG: TPM: Extended PCR[7] with hash abf745ef9f960af5d8b19a1acd4bc0a19da056f607b06cce6b920eab83cbbdec
[ 9.215143] TRACE: /bin/key-init(6): main
[ 10.661503] TRACE: Under /etc/ash_functions:combine_configs
[ 10.749050] TRACE: Under /etc/ash_functions:pause_recovery
!!! Hit enter to proceed to recovery shell !!!
[ 10.998267] TRACE: /bin/setconsolefont.sh(6): main
[ 11.059640] DEBUG: Board does not ship setfont, not checking console font
[ 11.303012] TRACE: /bin/gui-init(641): main
[ 11.334099] TRACE: Under /etc/ash_functions:enable_usb
[ 11.421487] TRACE: /sbin/insmod(9): main
[ 11.578754] TRACE: /sbin/insmod(53): main
[ 11.630500] DEBUG: No module parameters, extending only with the module's content
[ 11.741780] TRACE: /bin/tpmr(832): main
[ 11.789365] DEBUG: TPM: Extending PCR[5] with /lib/modules/ehci-hcd.ko
[ 11.823496] TRACE: /bin/tpmr(234): tpm2_extend
[ 11.862739] TRACE: /bin/tpmr(252): tpm2_extend
[ 11.920404] DEBUG: TPM: Will extend PCR[5] with hash of file content /lib/modules/ehci-hcd.ko
[ 12.123507] TRACE: /bin/tpmr(265): tpm2_extend
[ 12.175292] DEBUG: TPM: Extended PCR[5] with hash 40c5206f06702e45d8e6632632255258af433be0641c96f514ea75ac14523a30
[ 12.234130] DEBUG: Loading /lib/modules/ehci-hcd.ko with busybox insmod
[ 12.278479] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 12.371875] TRACE: /sbin/insmod(9): main
[ 12.523874] TRACE: /sbin/insmod(53): main
[ 12.578418] DEBUG: No module parameters, extending only with the module's content
[ 12.697785] TRACE: /bin/tpmr(832): main
[ 12.753607] DEBUG: TPM: Extending PCR[5] with /lib/modules/uhci-hcd.ko
[ 12.786940] TRACE: /bin/tpmr(234): tpm2_extend
[ 12.819199] TRACE: /bin/tpmr(252): tpm2_extend
[ 12.879805] DEBUG: TPM: Will extend PCR[5] with hash of file content /lib/modules/uhci-hcd.ko
[ 13.088925] TRACE: /bin/tpmr(265): tpm2_extend
[ 13.158660] DEBUG: TPM: Extended PCR[5] with hash 1877332107fb8737a5636da26d4db2c10ffe4d1db2bcbde30b47774cdf05e02f
[ 13.223888] DEBUG: Loading /lib/modules/uhci-hcd.ko with busybox insmod
[ 13.253700] uhci_hcd: USB Universal Host Controller Interface driver
[ 13.269580] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 13.278675] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 13.287280] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 13.296481] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff00
[ 13.314557] hub 1-0:1.0: USB hub found
[ 13.332614] hub 1-0:1.0: 2 ports detected
[ 13.352400] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 13.361016] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 13.368653] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 13.376700] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000fee0
[ 13.395046] hub 2-0:1.0: USB hub found
[ 13.403107] hub 2-0:1.0: 2 ports detected
[ 13.418573] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 13.426975] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 13.434733] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 13.442497] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fec0
[ 13.460237] hub 3-0:1.0: USB hub found
[ 13.467466] hub 3-0:1.0: 2 ports detected
[ 13.579102] TRACE: /sbin/insmod(9): main
[ 13.730892] TRACE: /sbin/insmod(53): main
[ 13.781345] DEBUG: No module parameters, extending only with the module's content
[ 13.891152] TRACE: /bin/tpmr(832): main
[ 13.954015] DEBUG: TPM: Extending PCR[5] with /lib/modules/ohci-hcd.ko
[ 13.995207] TRACE: /bin/tpmr(234): tpm2_extend
[ 14.031074] TRACE: /bin/tpmr(252): tpm2_extend
[ 14.095694] DEBUG: TPM: Will extend PCR[5] with hash of file content /lib/modules/ohci-hcd.ko
[ 14.315253] TRACE: /bin/tpmr(265): tpm2_extend
[ 14.369608] DEBUG: TPM: Extended PCR[5] with hash 8a12ce4abfc87f11a023d4f1c26c225f5cffae248f9dad1fd30e78022996df02
[ 14.425800] DEBUG: Loading /lib/modules/ohci-hcd.ko with busybox insmod
[ 14.455207] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 14.548050] TRACE: /sbin/insmod(9): main
[ 14.693175] TRACE: /sbin/insmod(53): main
[ 14.742761] DEBUG: No module parameters, extending only with the module's content
[ 14.855233] TRACE: /bin/tpmr(832): main
[ 14.908035] DEBUG: TPM: Extending PCR[5] with /lib/modules/ohci-pci.ko
[ 14.940321] TRACE: /bin/tpmr(234): tpm2_extend
[ 14.970307] TRACE: /bin/tpmr(252): tpm2_extend
[ 15.018421] DEBUG: TPM: Will extend PCR[5] with hash of file content /lib/modules/ohci-pci.ko
[ 15.226408] TRACE: /bin/tpmr(265): tpm2_extend
[ 15.279951] DEBUG: TPM: Extended PCR[5] with hash 2065ee6544d78a5d31e67983166a9b8cf60dbe61bf0ee99c39e92816cc3a98db
[ 15.335930] DEBUG: Loading /lib/modules/ohci-pci.ko with busybox insmod
[ 15.360537] ohci-pci: OHCI PCI platform driver
[ 15.446600] TRACE: /sbin/insmod(9): main
[ 15.597149] TRACE: /sbin/insmod(53): main
[ 15.649850] DEBUG: No module parameters, extending only with the module's content
[ 15.753738] TRACE: /bin/tpmr(832): main
[ 15.809086] DEBUG: TPM: Extending PCR[5] with /lib/modules/ehci-pci.ko
[ 15.847559] TRACE: /bin/tpmr(234): tpm2_extend
[ 15.878030] TRACE: /bin/tpmr(252): tpm2_extend
[ 15.930320] DEBUG: TPM: Will extend PCR[5] with hash of file content /lib/modules/ehci-pci.ko
[ 16.131948] TRACE: /bin/tpmr(265): tpm2_extend
[ 16.190395] DEBUG: TPM: Extended PCR[5] with hash 116145df2c495dfd58354025799fe5bb9b4d8e078960e8d0d7ceda746e4f2d06
[ 16.247675] DEBUG: Loading /lib/modules/ehci-pci.ko with busybox insmod
[ 16.275465] ehci-pci: EHCI PCI platform driver
[ 16.296704] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 16.306151] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 16.316293] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfcf80000
[ 16.340527] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 16.357688] hub 4-0:1.0: USB hub found
[ 16.365707] hub 4-0:1.0: 6 ports detected
[ 16.376687] hub 1-0:1.0: USB hub found
[ 16.384573] hub 1-0:1.0: 2 ports detected
[ 16.393986] hub 2-0:1.0: USB hub found
[ 16.401424] hub 2-0:1.0: 2 ports detected
[ 16.410387] hub 3-0:1.0: USB hub found
[ 16.418087] hub 3-0:1.0: 2 ports detected
[ 16.513839] TRACE: /sbin/insmod(9): main
[ 16.670778] TRACE: /sbin/insmod(53): main
[ 16.721953] DEBUG: No module parameters, extending only with the module's content
[ 16.835964] TRACE: /bin/tpmr(832): main
[ 16.888003] DEBUG: TPM: Extending PCR[5] with /lib/modules/xhci-hcd.ko
[ 16.919798] TRACE: /bin/tpmr(234): tpm2_extend
[ 16.957470] TRACE: /bin/tpmr(252): tpm2_extend
[ 17.013535] DEBUG: TPM: Will extend PCR[5] with hash of file content /lib/modules/xhci-hcd.ko
[ 17.225097] TRACE: /bin/tpmr(265): tpm2_extend
[ 17.281099] DEBUG: TPM: Extended PCR[5] with hash 7f5a6bd0f7de6104e49374e1e5ce421e11795fcc4f53014ef9259d630d7876bc
[ 17.337551] DEBUG: Loading /lib/modules/xhci-hcd.ko with busybox insmod
[ 17.448660] TRACE: /sbin/insmod(9): main
[ 17.595458] TRACE: /sbin/insmod(53): main
[ 17.653305] DEBUG: No module parameters, extending only with the module's content
[ 17.763612] TRACE: /bin/tpmr(832): main
[ 17.817350] DEBUG: TPM: Extending PCR[5] with /lib/modules/xhci-pci.ko
[ 17.849196] TRACE: /bin/tpmr(234): tpm2_extend
[ 17.879069] TRACE: /bin/tpmr(252): tpm2_extend
[ 17.927859] DEBUG: TPM: Will extend PCR[5] with hash of file content /lib/modules/xhci-pci.ko
[ 18.126778] TRACE: /bin/tpmr(265): tpm2_extend
[ 18.188056] DEBUG: TPM: Extended PCR[5] with hash 5502fa8c101f7e509145b9826094f06dd0e225c2311a14edc9ae9c812518a250
[ 18.247945] DEBUG: Loading /lib/modules/xhci-pci.ko with busybox insmod
[ 18.286509] xhci_hcd 0000:00:04.0: xHCI Host Controller
[ 18.294553] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 5
[ 18.308276] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[ 18.320288] hub 5-0:1.0: USB hub found
[ 18.328425] hub 5-0:1.0: 4 ports detected
[ 18.337635] xhci_hcd 0000:00:04.0: xHCI Host Controller
[ 18.344430] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 6
[ 18.351769] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed
[ 18.360900] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 18.371095] hub 6-0:1.0: USB hub found
[ 18.378046] hub 6-0:1.0: 4 ports detected
[ 18.673695] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 18.960744] usb 6-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 19.112485] usb 5-3: new full-speed USB device number 3 using xhci_hcd
[ 20.433294] TRACE: /etc/functions(715): detect_boot_device
[ 20.489580] TRACE: /etc/functions(682): mount_possible_boot_device
[ 20.546126] TRACE: /etc/functions(642): is_gpt_bios_grub
[ 20.653417] TRACE: /dev/vda1 is partition 1 of vda
[ 20.777737] TRACE: /etc/functions(619): find_lvm_vg_name
[ 20.946450] TRACE: Try mounting /dev/vda1 as /boot
[ 20.997145] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[ 21.053058] TRACE: /bin/gui-init(319): clean_boot_check
[ 21.157752] TRACE: /bin/gui-init(348): check_gpg_key
[ 21.260339] TRACE: /bin/gui-init(185): update_totp
[ 21.376906] TRACE: /bin/unseal-totp(8): main
[ 21.497372] TRACE: /bin/tpmr(569): tpm2_unseal
[ 21.574501] DEBUG: tpm2_unseal: handle=0x81004d47 pcrl=0,1,2,3,4,7 file=/tmp/secret/totp.key pass=<empty>
[ 22.212056] DEBUG: Running at_exit handlers
[ 22.247818] TRACE: /bin/tpmr(374): cleanup_session
[ 22.301292] DEBUG: Clean up session: /tmp/secret/unsealfile_policy.session
[ 22.423005] !!! ERROR: Unable to unseal TOTP secret !!!
[ 25.058227] TRACE: /bin/unseal-totp(8): main
[ 25.205031] TRACE: /bin/tpmr(569): tpm2_unseal
[ 25.284388] DEBUG: tpm2_unseal: handle=0x81004d47 pcrl=0,1,2,3,4,7 file=/tmp/secret/totp.key pass=<empty>
[ 25.914243] DEBUG: Running at_exit handlers
[ 25.947988] TRACE: /bin/tpmr(374): cleanup_session
[ 26.001694] DEBUG: Clean up session: /tmp/secret/unsealfile_policy.session
[ 26.126464] !!! ERROR: Unable to unseal TOTP secret !!!
[ 28.766165] TRACE: /bin/unseal-totp(8): main
[ 28.898452] TRACE: /bin/tpmr(569): tpm2_unseal
[ 28.982708] DEBUG: tpm2_unseal: handle=0x81004d47 pcrl=0,1,2,3,4,7 file=/tmp/secret/totp.key pass=<empty>
[ 29.609216] DEBUG: Running at_exit handlers
[ 29.643372] TRACE: /bin/tpmr(374): cleanup_session
[ 29.696741] DEBUG: Clean up session: /tmp/secret/unsealfile_policy.session
[ 29.822748] !!! ERROR: Unable to unseal TOTP secret !!!
[ 31.890980] DEBUG: CONFIG_TPM: y
[ 31.945147] DEBUG: CONFIG_TPM2_TOOLS: y
[ 31.999643] DEBUG: Show PCRs
[ 32.157607] DEBUG: sha256:
[ 32.190288] 0 : 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.221302] 1 : 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.251240] 2 : 0x9FC171D45D54BDD49D40E8438BCF15808427BA72B11EC2DF1ACE877CA0CF4F14
[ 32.282127] 3 : 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.315382] 4 : 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.345767] 5 : 0xD76470232B7C3FD7D18D4DF3B77DACAFFDB876DBF3E84C996D74F7ECFA0FF60F
[ 32.379099] 6 : 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.409630] 7 : 0x2E3147A8ADA1FEBEB2D32D7F50F25DC10F47D7CD48DF1D61A2D6BF958114A231
[ 32.439780] 8 : 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.508514] 9 : 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.537395] 10: 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.583510] 11: 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.622661] 12: 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.651831] 13: 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.687298] 14: 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.721766] 15: 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.751345] 16: 0x0000000000000000000000000000000000000000000000000000000000000000
[ 32.782919] 17: 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
[ 32.813071] 18: 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
[ 32.841994] 19: 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
[ 32.869358] 20: 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
[ 32.907215] 21: 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
[ 32.937346] 22: 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
[ 32.967810] 23: 0x0000000000000000000000000000000000000000000000000000000000000000
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-09-06 17:15:53 -04:00
gaspar-ilom
39be8303d7
move w541 back to tested
...
Signed-off-by: gaspar-ilom <gasparilom@riseup.net>
2024-08-07 00:02:50 +02:00
Thierry Laurion
d0b0eef844
boards/UNTESTED_w541-hotp-maximized/UNTESTED_w541-hotp-maximized.config: Path is hardcoded to non hotp variant inclusion...
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-07-26 16:51:31 -04:00
Thierry Laurion
1b6d26a888
w541: rename/move board flavors to UNTESTED since untested for coreboot 24.02.01 version bumped and no news from expected board testers in time for merge
...
Replication notes:
- w541-hotp-maximized is a makefile inclusion of w541-maximized so order of ops is important
docker run -e DISPLAY=$DISPLAY --network host --rm -ti -v $(pwd):$(pwd) -w $(pwd) tlaurion/heads-dev-env:v0.2.1 -- make -d BOARD=w541-hotp-maximized board.move_tested_to_untested
time docker run -e DISPLAY=$DISPLAY --network host --rm -ti -v $(pwd):$(pwd) -w $(pwd) tlaurion/heads-dev-env:v0.2.1 -- make -d BOARD=w541-maximized board.move_tested_to_untested
git status
git add boards/UNTESTED_w541-hotp-maximized/UNTESTED_w541-hotp-maximized.config boards/UNTESTED_w541-maximized/UNTESTED_w541-maximized.config boards/w541-hotp-maximized/w541-hotp-maximized.config boards/w541-maximized/w541-maximized.config .circleci/config.yml
git commit --signoff
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-07-26 15:45:34 -04:00
Thierry Laurion
cf9d10adeb
t530(-hotp)-maximized: move+ rename to boards/* + unify with x230-maximized boards for 24.02.01 + add Makefile helper + add back to CircleCI
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-07-26 15:40:09 -04:00
Thierry Laurion
646db06eb6
boards/*/*.config: bump coreboot 4.22.01 boards config to use 24.02.01
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-07-26 15:35:56 -04:00
Maciej Pijanowski
2cd5b0960a
modules: drop iotools
...
As discussed in: linuxboot#1704
there is no need to include iotools module for nitropads.
Since there is no board using it, and we see no reason to use
it in the future (the EC udpate will not require it, as update
will be server by coreboot in the future), drop the module as well.
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
2024-06-21 17:08:14 +02:00
Thierry Laurion
fc146681f7
Merge pull request #1673 from tlaurion/build-UNMAINTAINED_t530-maximized
...
Build unmaintained t530 maximized
2024-05-29 18:55:07 -04:00
Thierry Laurion
1035a93e79
Build UNMAINTAINED_t530-maximized as requested under #1672
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-05-13 12:15:06 -04:00
Thierry Laurion
3a7292018e
Merge remote-tracking branch 'osresearch/master' into pr/tlaurion/1662
2024-05-13 09:23:20 -04:00
Thierry Laurion
c52fd42802
Merge remote-tracking branch 'osresearch/master' into pr/tlaurion/1661
2024-05-10 15:36:54 -04:00
Michał Kopeć
f6f216c5b8
Use single coreboot rev for MSI and NCM
...
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-05-10 14:50:37 -04:00
Thierry Laurion
443955e086
nv41/ns50 board config: Add note referring that those boards FB are GOP enabled just like the librem_11 for reference
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-05-10 14:50:31 -04:00
Michał Żygowski
8e7e18920d
modules/nitrokey-blobs,boards/nitropad: Remove obsolete blobs module
...
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-05-10 14:39:53 -04:00
Thierry Laurion
e4976e7882
Re-add kgpe-d16 as UNMAINTAINED_* boards, still built by CircleCI (since cosntant interest in the builds)
...
Modify .circleci/config.yml to also not reuse past caches if CircleCI config changes as part of calculated hashes for the 3 layers
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-05-08 15:36:27 -04:00
Thierry Laurion
60e0d6017f
boards: uniformize nitropad boards with qemu-coreboot boards and against each other
...
- Add tethering in board configs
- Add autoboot after 5 seconds if HOTP remote attestation is successful
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-05-03 13:29:17 -04:00
Thierry Laurion
865a0c6a2b
WiP: Boards configuration unification between x230-hotp-maximized and nitrokey boards: enable Automatic boot when HOTP valid after 5 seconds
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-05-03 12:30:20 -04:00
Thierry Laurion
89a0c103ae
QEMU/KVM board configs: logical reorganization of requirements for board configs. Next step is creating fbwhiptail/whiptail/tpm1/tpm2 mk files and include them in all boards
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-04-19 15:52:50 -04:00
Thierry Laurion
9fcd5f8fe4
Move boards/UNTESTED_* boards to untested_boards/UNMAINTAINED_*, remove them from CircleCI, add Makefile helper and document untested_boards/README.md
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-03-25 16:05:57 -04:00
Thierry Laurion
fb616f416a
WiP 4.22.01 fhd patch test + bump all 4.19 boards to 4.22.01
...
- patches/coreboot-4.22.01/0001-x230-fhd-variant.patch created per
- git fetch https://review.coreboot.org/coreboot refs/changes/50/28950/23 && git format-patch -1 --stdout FETCH_HEAD > ~/heads/patches/coreboot-4.22.01/0001-x230-fhd-variant.patch
- all boards configs bumped with:
- grep -Rn 4.22 boards/ | awk -F "/" {'print $2'}| while read line; do make BOARD=$line coreboot.save_in_oldconfig_format_in_place ; done
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-03-25 15:14:42 -04:00
Jonathon Hall
65f0b905f6
boards/librem*, config/linux-librem*: Enable mobile tethering
...
Enable mobile tethering on all Librem boards.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
2024-02-22 12:35:41 -05:00
Thierry Laurion
9b69f1b66a
boards/x230-hotp-maximized_usb-kb/x230-hotp-maximized_usb-kb.config: unify with x230-hotp-maximized
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-02-21 13:50:28 -05:00
Thierry Laurion
7cbcdd8ed7
Tethering refresh for CDC NCM/CDC EEM mobile phones (tested on GrapheneOS Pixel 6a, no more RNDIS support)
...
- Add additional requirements to linux config
- Add additional CONFIG_MOBILE_TETHERING=y to all maximized board configs
- Fix issue under network-recovery-init to NTP sync against NTP server pool
- Extend network-recovery-init to first try NTP sync against DNS server returned by DHCP answer
- Remove network-recovery-init earlytty and tty0 redirection (console should be setuped properly by init in all cases)
- If CONFIG_MOBILE_TETHERING=y added to board config and network-recovery-init called, wait to user input on instructions and warning 30 secs before proceeding (non-blocking)
- Machines having STATIC_IP under board config won't benefit of autoatic NTP sync
Since network-recovery-init can only be called from recovery shell now, and recovery shell can be guarded by GPG auth, this is PoC code to be used to complement TOTP being out of sync
TODO(Future PR):
- Refactor into functions and reuse into TOTP/HOTP being out of sync automatically.
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-02-21 13:50:18 -05:00
Jonathon Hall
0a823cb491
Allow laptops to include optional USB keyboard support
...
Laptops can include optional USB keyboard support (default off unless
the board also sets the default to 'y'). The setting is in the
configuration GUI.
CONFIG_USER_USB_KEYBOARD is now the user-controlled setting on those
boards. 'CONFIG_USB_KEYBOARD' is no longer used to avoid any conflict
with prior releases that expect this to be a compile-time setting only
(conflicts risk total lock out requiring hardware flash, so some
caution is justified IMO).
Boards previously exporting CONFIG_USB_KEYBOARD now export
CONFIG_USB_KEYBOARD_REQUIRED. Those boards don't have built-in
keyboards, USB keyboard is always enabled. (librem_mini,
librem_mini_v2, librem_11, librem_l1um, librem_l1um_v2, talos-2,
kgpe-d16_workstation-usb_keyboard, x230-hotp-maximized_usb-kb).
Librem laptops now export CONFIG_SUPPORT_USB_KEYBOARD to enable
optional support. The default is still 'off'.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
2024-01-10 15:38:06 -05:00
Thierry Laurion
a2ebf251e0
hotp boards: enable autoboot after 5 seconds if reverse HOTP against USB Security Dongle is successful by default
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-01-09 15:06:04 -05:00
Thierry Laurion
77f9933538
xx20/xx30 blob based boards: move ME blobs target outside of board configs (targets/xx*_blobs.mk)
...
Makefile: have inclusion of all defined $BOARD BOARD_TARGETS (me, split_8mb4mb, ...)
TODO: VBIOS scripts for W530/T530 need way more work. To be done later.
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-01-04 15:32:09 -05:00
Thierry Laurion
197914b396
xx20 boards and circleci: Have boards download extract and neuter me by board config
...
Fix https://github.com/linuxboot/heads/issues/1569 part of error linked to me not being available in blobs/xx20/me.bin
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-01-04 14:21:08 -05:00
Thierry Laurion
0d6cba852b
w530-dgpu K2000 boards : have the boards call vbios download script automatically. Breaks on debian-12 as of now but should work on debian-11 for others, gems say deprecated calls....
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-01-04 14:21:03 -05:00
Thierry Laurion
1fea3e4463
t530-dgpu boards : have the boards call vbios download script automatically. Breaks on debian-12 as of now but should work on debian-11 for others, gems say deprecated calls....
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-01-04 14:21:01 -05:00
Thierry Laurion
43d1b4ed81
xx30: have all xx30 download me automatically.
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2024-01-04 14:21:00 -05:00
Thierry Laurion
718a831481
Board configs: move t420-hotp-maximized t420-maximized w530-maximized w530-hotp-maximized away from UNTESTED_ boards
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2023-12-30 13:36:28 -05:00
Jonathon Hall
ab97b242b4
Merge remote-tracking branch 'github-heads/master' into site-local-config
2023-12-19 14:14:25 -05:00
Thierry Laurion
61843d890b
Unify upstream board config defaults
...
- Upstream boards will not deactivate TPM DUK
- Upstream will not force BRAND_NAME which currently defaults to Heads
- Upstream will not deactivate Qr code on screen output on HOTP sealing
- Upstream will not offer OEM reset defaults (deprecated and now default anyway)
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2023-12-19 13:05:46 -05:00
Jonathon Hall
12a099ad8e
talos-2: Move PPC-style tgz update package targets to targets/
...
Move the targets generating talos-2's tgz update package to targets.
While this wasn't duplicated, it breaks a cyclic dependency between
board config and BRAND_NAME by moving the ROM output name dependencies
later. The logic probably would be shared with similar boards if any
were supported, so it is in the spirit of the other targets/ shared
target Makefiles.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
2023-12-18 16:49:52 -05:00
Jonathon Hall
8ce9c9d438
*-legacy-flash: Deduplicate generation of "top" ROM
...
Move Makefile target for the "top" ROM to targets/legacy_flash.mk.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
2023-12-18 16:49:52 -05:00
Jonathon Hall
d512cd4ad2
12MB boards: Deduplicate generation of 8MB/4MB split ROMs
...
Move Makefile targets for split ROMs to targets/split_8mb4mb.mk.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
2023-12-18 16:49:52 -05:00
Jonathon Hall
c8e114166c
qemu: Deduplicate Qemu targets/documentation, extract from boards
...
The 8 qemu-* targets all contained nearly-identical copies of the
targets to prepare the TPM/disk/etc. and then run Qemu. The only
significant differences were for TPM1/TPM2 (extra swtpm_setup step,
addition of --tpm2 to swtpm_setup and swtpm). ROOT_DISK_IMG used := or
= differently in some boards, := was kept.
targets/qemu.mk now defines all Qemu targets and is included only for
qemu-* boards (by defining BOARD_TARGETS in each of those boards).
The documentation was moved from qemu-coreboot-fbwhiptail-tpm1-hotp/
qemu-coreboot-fbwhiptail-tpm1-htop.md to targets/qemu.md. The other 7
qemu boards' symlinks to that file were removed.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
2023-12-18 16:49:10 -05:00
Thierry Laurion
b8a06c5351
Librems/Nitropad: enable QR code printed on screen at TOTP/HOTP Generation
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2023-12-16 13:15:14 -05:00
Thierry Laurion
d8f098cd53
All board configs: first line now BRAND_NAME=Heads to ease rebranding with sed scripts for downstream projects/forks
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2023-12-16 12:56:58 -05:00
Thierry Laurion
bac35e3b3e
Librems/Nitropad: enable TPM DUK under Heads branding (CONFIG_TPM_NO_LUKS_DISK_UNLOCK=n)
...
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
2023-12-16 12:52:19 -05:00
tlaurion
4a57c615e9
Merge pull request #1522 from tlaurion/efifb_next_step_related_cleanups
...
WiP: FB_EFI (EFIFB kernel module's framebuffer on top of libgfxinit or GOP) next steps related cleanups
2023-12-12 13:04:58 -05:00