-coreboot support of TPM v2.0 (shared config for TPM2 support across all 4 previous variations)
-swtpm set to be launched under TPM v2.0 mode under board config
-Documentation file under each board.md softlinks to qemu-coreboot-fbwhiptail-tpm1.md (which has been generalized)
This is skeleton for TPM v2 integration under Heads
-------------
WiP
TODO:
- libcurl cannot be built as a tpm2-tools dependency as of now not sure why. curl currently needs to be added in board config to be built
- Note: tpm-reset (master and here) needs some review, no handle of no tpm use case. Caller is responsible to not call it otherwise does nothing
- init tries to bind fd and fails currently
- Note: Check if whiptail is different of fbwhiptail in clearing screen. As of now every clear seems to be removed, still whiptail clears previous console output
- When no OS' /boot can be mounted, do not try to TPM reset (will fail)
- seal-hotpkey is not working properly
- setting disk unlock key asks for TPM ownership passphrase (sealing in NV requires ownership, but text is misleading user as if reowning TPM)
- We should cache input, feed tpm behind the scene and wipe passphrase and state clearly that this is TPM disk unlock kye passphrase.
- primary key from TPM2 is invalid most of the time from kexec-select-boot and verifying global hashes but is setuped correctly at disk unlock key setup
- would be nice to take advantage of bash function tracing to understand where we are for debugging purposes, code takes ash in consideration only
- tpmr says it implements nv calls but actually doesn't. Removing those falsely wrapped functions would help.
- Implementing them would be better
- REVIEW TODOS IN CODE
- READD CIRCLECI CONFIG
Current state:
- TPM unseal works without disk unlock key and generates TOTP properly (was missing die condition at unseal to not produce always good TOTP even if invalid)
- TPM disk encryption key fails. Hypothesis is that sealing with USB drivers loaded and measures in inconsistent with sealed with/without.
- TPM disk unsealing happens without USB modules being loaded in non-HOTP setup. This fails.
- Current tests are with fbwhiptail (no clear called so having traces on command line of what happens)
- Testing with HOTP implementation for sealing/unsealing since that forces USB module loads on each boot to remove this from failing possibilities
The calculations outlined at https://github.com/osresearch/heads/pull/1282#discussion_r1072473677
Sums to having 'ifdtool -f layout.txt ifd_shrinked.bin && cat layout.txt'
The example for T440p:
00000000:00000fff fd
00021000:00bfffff bios
00003000:00020fff me
00001000:00002fff gbe
Here: 00bfffff-00021000=BDEFFF
Which is exact result of @rbeslow's calculations.
There is an issue on haswell, maybe because of car, maybe because of non native memory init blob.
But this is not the case for xx20/xx30 boards.
- add x230-maximized-fhd_edp and x230-hotp-maximized-fhd_edp board configs
- add/rework coreboot patch for x230 fhd variant to be applied on top of 4.13
- add coreboot config to point to x230-edp variant, fixing path to vbt file since default path is wrong under. Comment made upstream https://review.coreboot.org/c/coreboot/+/28950/22#message-4904ce82f01ba0505b391e072e4537b6a9f1a229
- remove no gfx init and replace with libgfxinit(defonfig default), set internal display as default
- add x230-hotp-maximized-fhd_edp and x230-maximized-fhd_edp to CircleCI builds
- One single shared coreboot config between boards/x230-hotp-maximized-fhd_edp/x230-hotp-maximized-fhd_edp.config and boards/x230-maximized-fhd_edp/x230-maximized-fhd_edp.config
- Coreboot 4.13 patch from coreboot at patches/coreboot-4.13/0002-x230-fhd-variant.patch
- config/coreboot-x230-maximized-fhd_edp.config points to seperate coreboot config per patch (CONFIG_BOARD_LENOVO_X230_EDP)
I went through all of the different options we copied from the Librem
config. The only thing that stood out as irrelevant was NVMe support.
However, I'm not a Linux kernel expert, and I didn't do a deep dive, so
I'm sure there is still room for improvement.
Remove options that haven't deviated from defaults in the Coreboot
Kconfig, despite being saved by `make savedefconfig`. Also, add
`CONFIG_BOARD_LENOVO_THINKPAD_T440P`, which was missing from the `make
savedefconfig` output, causing Heads builds to fail. And finally, bump
`CONFIG_CBFS_SIZE` to `0x800000` (8 MiB to bytes to hexadecimal).
This value for the CBFS size is arbitrary. Originally, I had totaled the
size of all binary blobs, subtracted that from the T440p's ROM size (12
MiB), and used the remaining space as the CBFS size (~11.68 MiB).
However, this caused very long RAM initialization times (courtesy of
`cbmem -t`). And, an anecdote in
https://groups.google.com/a/chromium.org/g/chromium-os-reviews/c/lUqRrGUoEBY/m/ka7L1f2BS8gJ
suggested that this value needs to be a power of 2.
So, I picked a size I expected our Linux payload to fit into that was a
power of 2 that I also expected would leave enough space in the ROM for
the IFD, ME, GbE, and Coreboot.
Now, it takes less than a second for RAM initialization after
flashing/first boot (anecdotally, it seems the MRC needs to be
"trained?").
- ROOT_DISK_IMG is now dynamic (ROOT_DISK_IMG=/path/to/existing/provisioned/disk.img can be reused across run statements)
- Addition of missing boards to cover all use cases
- All TPM1 boards rely on common config/coreboot-qemu-tpm1.config
- boards/qemu-coreboot-fbwhiptail-tpm1-hotp/qemu-coreboot-fbwhiptail-tpm1-hotp.md has been generalized
- all other boards are softlinked to the above for usage
This makes configs much less dependent on directory layout.
As of this commit the following variables are supported:
* @BOARD_BUILD_DIR@ - absolute path under build/
* @BLOB_DIR@ - absolute path to blobs/
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Enable virtio video and storage.
Enable serial console and tweak kernel command line to show logs.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Add qemu-coreboot-fbwhiptail-tpm1-hotp configuration, which has a 'run'
target to boot with a persistent TPM, disk, virtual USB disk, and USB-
forwarded token
Provide instructions for bootstrapping a complete working system in qemu
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Set ATA and SATA configs to y, not m - modules weren't being loaded. Other
configs also build these into kernel, so do the same for qemu. Remove relevant
configs from boards since modules no longer need to be in initrd.
Enable OHCI and UHCI. qemu forwards host USB devices over a UHCI controller.
This enables USB-forwarding a physical Librem Key or Nitrokey Pro to the VM.
Export CONFIG_LINUX_USB_COMPANION_CONTROLLER to have enable_usb() load the
modules - it wants both UHCI and OHCI modules, so build both.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
EC signatures requires that the digest has the corresponding length. Removing the hardcoded sha2-256 hash function and adding support of sha2-384 and sha2-512 should allow using EC crypto.
- this boards is a duplicate of x230-hotp-maximized with USB Keyboard support
Testing points:
- x230-hotp-maximized does not accept input from USB keyboard
- x230-hotp-maximized_usb-kb accepts input from USB keyboard
Testing point:
- All board configs not explicitely stating export CONFIG_USB_KEYBOARD=y should not have any impact
- librem_l1um, kgpe-d16_workstation-usb_keyboard, librem_mini_v2 and librem_mini will loose USB Keyboard input with this commit alone.
Those boards now produce 4MB coreboot ROM and according CBFS small size, and remove the logic to extract 4Mb ROM out of the 12Mb rom which for some reason, was now misaligned.
config/coreboot-xx30-flash : remove all unnneded stuff to xx30-flash boards.
config/linux-x230-flash: used commonly for all xx30-flash boards, this is now finally saved with savedeconfig, and removes another bunch of unneeded stuff.
Tested working. Fixes#1095
This commit adds explanatory notes and updates existing t530 and w530 boards to generally align them with the dGPU points and provide signposting for those with and those without dGPU boards. It also adds an additional README in the blobs directory to explain the vbios extraction and building process.
This commit adds support for the t530 and w530 boards to enable dGPUs. dGPU's are required for DisplayPort external displays in the t530 dgpu model, and for both the VGA dn DisplayPort external displays in the W530 (which has two dGPUs, the K1000M and K2000M, hence two boards). The commit does the following:
1. Adds automated extraction scripts for vbios modelled on the me script in the blobs directory (one per board is necessary as it is based on board-specific bios updates).
2. Adds specific boards for the various dGPU models and corresponding coreboot configs.
3. Updates circleci config.yaml to run scripts and test boards.
Tested and working on T530 dgpu and W530 K1000M. dGPU scripts tested on Debian 10 and Ubuntu 21.04
Resolves issues booting Qubes 4.1-RC1 installer. Drop log level
to be consistent with the Librem 14/Mini v1/v2.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Update all Purism Librem boards except the L1UM server
to coreboot 4.15:
- update coreboot version from 4.8.1/4.13 to 4.15
- use purism_blobs module (if not already)
- update board coreboot defconfig files (Librem 13/15)
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
-CircleCI addition.
-Removal of t530-flash, w530-flash boards, flash scripts and associated coreboot configs (no more legacy boards additions)
This is a merger of #1071, #1072 and #1073 so that test builds are available over CircleCI until osresearch/master CircleCI gets unlocked.
- xx30 legacy boards (x230, x230-flash, t430, t430-flash) now rely also on coreboot 4.13
- DOWNSIDE: x230 and t430 legacy boards now rely on WHIPTAIL (NOT FBWhiptail) to have enough space to fit under 7mb)
- xx20 boards moved to 4.13 (no need of xx20-flash boards here since single SPI boards with 7.5mb useable since blobs scripts are required)
- DOWNSIDE: all xx20 boards now have dropbear deactivated, while still having ethernet driver in.
- qemu-coreboot and qemu-coreboot-fbwhiptail switched to coreboot 4.13 WITHOUT TPM SUPPORT (with cryptsetup 2.x support)
- DOWNSIDE:
- coreboot-qemu board CBFS_SIZE=0x700000 -> 0x750000
- coreboot-qemu-fbwhiptail CBFS_SIZE=0x750000 -> 0x780000
- CircleCi build recipe removes 4.8.1 boards altogether
- KGPE-D16 workstation is used as new base build to save workspace layer (we removed one workspace layer)
- Removing one workspace layer will save approx 2 hours of build time on fresh builds
- Removing one coreboot version will save us approx 2 hours of build time on fresh builds
- KGPE-D16 will stay to coreboot 4.11 until forward notice.
- All other board configs SHOULD be built on latest coreboot versions
- all: coreboot NO_POST for all boards
- all: coreboot NO_GFX_INIT (linux payload does the graphic init)
- all: coreboot TPM_MEASURED_BOOT (no more patches under Heads for measured boot)
- all: coreboot DRIVERS_PS2_KEYBOARD (fixes no keyboard on soft reboot and potentially xx30t xx20t fix for random raw keyboard (to be tested)
- all: coreboot removal of DEFAULT_CONSOLE_LOGLEVEL_5 under some boards
- all: coreboot removal of "loglevel=3" under some linux command line options booting Heads kernel
- all: coreboot removal of DEBUG_SMM_RELOCATION (unneeded)
- all: coreboot INCLUDE_CONFIG_FILE and COLLECT_TIMESTAMPS for all boards
- all: coreboot CONSOLE_SERIAL present on all boards
- all: coreboot add VBT
- all: board configs switch to cryptsetup2
xx20 hotp-maximized boards:
- removal of dropbear (not enough space to have htop + dropbear)
txx0 boards coreboot:
- USE_OPTION_TABLE and STATIC_OPTION_TABLE added (todo: check T430 boards optimization and find issue/PR and ammend this commit)