All boards with CONFIG_LINUX_USB=y ship ehci-* and xhci-*, they are
not controlled by CONFIG_LINUX_USB_COMPANION_CONTROLLER. Always
insert them when initializing USB. Fixes commit 35de2348
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Also remove output of attempted module loading since DEBUG will show if needed
Remove timeout after 30 seconds to unify UX and block
Change UX wording
Should address all PR review comments
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
- Add additional requirements to linux config
- Add additional CONFIG_MOBILE_TETHERING=y to all maximized board configs
- Fix issue under network-recovery-init to NTP sync against NTP server pool
- Extend network-recovery-init to first try NTP sync against DNS server returned by DHCP answer
- Remove network-recovery-init earlytty and tty0 redirection (console should be setuped properly by init in all cases)
- If CONFIG_MOBILE_TETHERING=y added to board config and network-recovery-init called, wait to user input on instructions and warning 30 secs before proceeding (non-blocking)
- Machines having STATIC_IP under board config won't benefit of autoatic NTP sync
Since network-recovery-init can only be called from recovery shell now, and recovery shell can be guarded by GPG auth, this is PoC code to be used to complement TOTP being out of sync
TODO(Future PR):
- Refactor into functions and reuse into TOTP/HOTP being out of sync automatically.
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
When testing a possible boot device, detect its partition type and
skip grub, LUKS, and LVM partitions. These aren't mountable as /boot,
this silences spurious exFAT errors.
In detect_boot_device, skip testing CONFIG_BOOT_DEV a second time if it
is found as a block device. This avoids doubling any errors shown from
checking this device, no sense trying it twice.
Refactor some logic to avoid duplication - extract
device_has_partitions and use it in detect_boot_device, extract
mount_possible_boot_device and use it instead of duplicating the logic.
Move find_lvm_vg_name() to /etc/functions.
Avoid mixing up similarly-named devices like 'nvme0n1'/'nvme0n10' or
'sda'/'sdaa' - it's probably unlikely that many devices will appear,
but looking for partitions in '/sys/class/block/<device>/' instead of
'/dev/' would avoid any collisions.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Since exFAT support was enabled, mounting an iso9660 filesystem prints
spurious exFAT errors to the console. That is because busybox mount
tries all filesystems in the order listed, and exfat precedes iso9660
(those are the last two in our config). Most filesystems are silent
when used on the wrong type of filesystem, but exFAT logs errors, which
appear on the console.
Move exFAT after iso9660, so iso9660 filesystems won't show these
errors. The errors will still appear if the filesystem is actually
exFAT but cannot be mounted.
There's no significant risk of misdetecting a remnant iso9660
superblock here either. Although an iso9660 superblock could fall in
the unused space between the exFAT boot region and the FAT itself,
mkfs.exfat does zero this space so it is unlikely such a remnant
superblock would exist.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Exception: scripts sourcing/calls within etc/ash_functions continues to use old TRACE functions until we switch to bash completely getting rid of ash.
This would mean getting rid of legacy boards (flash + legacy boards which do not have enough space for bash in flash boards) once and for all.
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
Reword the notice shown when enabling USB keyboards based on feedback.
Remove the notice when disabling USB keyboard support, show it only
when enabling.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Next steps on this is introspection and PCRs reconstruction helpers, which will output in DEBUG and be usable from recovery shell.
We have to keep in mind that providing those tools is useful in DEBUG mode and for users having access to Recovery Shell.
But currently, having access to cbmem -L output and final PCRs content is making it too easy for Evil Maid to know what needs to be hardcoded to pass measured boot.
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
When playing with long fbwhiptail/whiptail messages, this commit played around the long string using fold.
'''
echo -e "This will replace the encrypted container content and its LUKS Disk Recovery Key.\n\nThe passphrase associated with this key will be asked from the user under the following conditions:\n 1-Every boot if no Disk Unlock Key was added to the TPM\n 2-If the TPM fails (hardware failure)\n 3-If the firmware has been tampered with/modified by the user\n\nThis process requires you to type the current LUKS Disk Recovery Key passphrase and will delete the LUKS TPM Disk Unlock Key slot, if set up, by setting a default boot LUKS key slot (1) if present.\n\nAt the next prompt, you may be asked to select which file corresponds to the LUKS device container.\n\nHit Enter to continue." | fold -w 70 -s
'''
Which gave the exact output of what will be inside of the fbwhiptail prompt, fixed to 70 chars width:
'''
This will replace the encrypted container content and its LUKS Disk
Recovery Key.
The passphrase associated with this key will be asked from the user
under the following conditions:
1-Every boot if no Disk Unlock Key was added to the TPM
2-If the TPM fails (hardware failure)
3-If the firmware has been tampered with/modified by the user
This process requires you to type the current LUKS Disk Recovery Key
passphrase and will delete the LUKS TPM Disk Unlock Key slot, if set
up, by setting a default boot LUKS key slot (1) if present.
At the next prompt, you may be asked to select which file corresponds
to the LUKS device container.
Hit Enter to continue.
'''
Therefore, for long prompts in the future, one can just deal with "\n 1-" alignments to be respected in prompts and have fold deal with cutting the length of strings properly.
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
Don't spew the root hashes to the console when creating the hash file.
This speeds up hash creation significantly. A basic Qubes install on a
cheap (slow) SATA SSD reduced from about 1.5 minutes to just under 1
minute, and a PureOS install on a fast NVMe disk reduced from 2.5
minutes to 1 minute.
Support opening LVM volume groups to find the root disk. If an LVM PV
is found, its group is opened and the 'root' volume is used. There is
no way to set the volume name in this iteration; this is the default
name used by Qubes and probably common to many LVM OS installations.
LUKS and LVM can be mixed. Tested LUKS (PureOS) and LUKS+LVM (Qubes).
Always cd to "$ROOT_MOUNT" in a subshell, improves robustness of
scripts (previously some functions only worked if they were called
after another function had cd'd to "$ROOT_MOUNT").
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Say the action to take in the menu (enable or disable) instead of just
"Check root hashes at boot".
Clean up some use of load_config_value, set_config, combine_configs.
Get config values from the environment directly. set_user_config does
set_config and combine_configs.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Add TRACE_FUNC to trace the file, line, and name of the calling
function. File and function names don't have to be duplicated in a
TRACE statement with this (they tend to become inaccurate as functions
are renamed and the TRACE statement is forgotten).
Add DEBUG_STACK to dump the bash stack to debug output.
Configure bash with --enable-debugger. Bash doesn't actually include
the entire debugger, this is just some supporting variables for it.
Evidently, BASH_SOURCE[n] is only set within a function if this is
enabled. I couldn't find this indicated in any documentation, but it
happened in practice.
Compressed initrd size only increased by 2560 bytes for librem_mini_v2,
I think that is fine. This also gives us BASH_ARGC/BASH_ARGV which
might be useful for diagnostics.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Laptops can include optional USB keyboard support (default off unless
the board also sets the default to 'y'). The setting is in the
configuration GUI.
CONFIG_USER_USB_KEYBOARD is now the user-controlled setting on those
boards. 'CONFIG_USB_KEYBOARD' is no longer used to avoid any conflict
with prior releases that expect this to be a compile-time setting only
(conflicts risk total lock out requiring hardware flash, so some
caution is justified IMO).
Boards previously exporting CONFIG_USB_KEYBOARD now export
CONFIG_USB_KEYBOARD_REQUIRED. Those boards don't have built-in
keyboards, USB keyboard is always enabled. (librem_mini,
librem_mini_v2, librem_11, librem_l1um, librem_l1um_v2, talos-2,
kgpe-d16_workstation-usb_keyboard, x230-hotp-maximized_usb-kb).
Librem laptops now export CONFIG_SUPPORT_USB_KEYBOARD to enable
optional support. The default is still 'off'.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
'find' may fail if I/O errors occur (medium faulty or removed,
filesystem corruption, etc.) Show a message if this occurs rather than
just dying and returning to the main menu.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
If the user selects a plain ROM, but that file can't be read, show a
message and exit rather than dying. Copy the ROM to RAM before doing
anything with it in case the media fails later.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
If we can't mount /boot, show a meaningful error rather than dropping
to a recovery shell.
Dropping to a recovery shell should be a last resort. Users that know
how to use the recovery shell know how to get there. Users that don't
know how to use it can be completely stuck and may not know how to get
back to the menu or even how to turn off the device.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Automatic boot can be configured in the configuration GUI. Options are
disable, 1 second, 5 seconds, or 10 seconds.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Change order if user chooses both reencrypt and change passphrase, so that passphrase is changed first.
Signed-off-by: Christian Foerster <christian.foerster@mailfence.com>
Removed all mentions of a "Recovery Disk Key" and replaced with "Disk Recovery Key".
Fixed some grammatical errors.
Added check for new passphrase in reencrypt function to accommodate switching of reencrypt and new passphrase setting order in oem-factory-reset.
Signed-off-by: Christian Foerster <christian.foerster@mailfence.com>
Uses fold on the entire passphrase string now; tested in recovery shell of NK Heads 2.1.
Reverted change of WIDTH parameter (first commit of this PR).
Signed-off-by: Christian Foerster <christian.foerster@mailfence.com>
This partially fixes#1537, but while the increased width wouldn't be a problem on the NV41 AFAICT, I don't know about other machines.
I don't know what @tlaurion means with "busybox's folding", which may be a better solution.
Signed-off-by: Christian Foerster <christian.foerster@mailfence.com>
The call to `hotp_verification regenerate` seems to leave the
communication in a bad state, thus the following `gpg` calls fail. With
this workaround `scdaemon` will resart with the next `gpg` call.
Signed-off-by: Markus Meissner <coder@safemailbox.de>
talos-2 (only) uses .tgz instead of .rom for updates. Currently, both
are treated as alternatives to a ZIP-format update archive with
SHA-256 integrity check, extend that to the prompts to reduce clutter.
Reflow the "You will need ... your BIOS image" prompt to fit on
fbwhiptail.
The .tgz format could be better integrated with the ZIP updates, but
this needs more work specific to talos-2.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Allow configuring the ZIP-format update file extension with
CONFIG_BRAND_UPDATE_PKG_EXT in board config. Default is 'zip'.
Create update package in the default Makefile target. Delete
create_npf.sh.
Do not require /tmp/verified_rom in the update file package's
sha256sum.txt (but allow it for backward compatibility).
Show the integrity error if unzip fails instead of dying (which returns
to main menu with no explanation, error is left on recovery console).
This is the most likely way corruption would be detected as ZIP has
CRCs. The sha256sum is still present for more robust detection.
Don't require the ROM to be the first file in sha256sum.txt since it
raises complexity of adding more files to the update archive in the
future. Instead require that the package contains exactly one file
matching '*.rom'.
Restore confirmation prompt for the update-package flow, at some point
this was lost.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Don't repeat this message if the user says "no" to the confirmation
prompt. Go directly to the menu.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Move confirmation of formatting flash drive with LUKS percentage
selection before any reset actions have been taken, so aborting does
not result in a half-reset system. Combine with the more basic
"confirm" prompt that existed after selecting the device (but did not
include the LUKS size information).
Split up prepare_flash_drive into interactive_prepare_flash_drive (both
prompts and formats as before), confirm_thumb_drive_format (just
confirms the selections), and prepare_thumb_drive (now noninteractive).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Combine prompt to disconnect other devices with prompt to connect the
desired device.
Show block device sizes in MB/GB when selecting device so it is easier
to select. file_selector now supports --show-size to include block
device sizes in menu.
Rework file_selector so menu options can contain spaces (use bash
array) and to simplify logic.
Prompt to select flash drive and LUKS percentage in OEM reset before
actually taking any actions, so aborting doesn't half-reset the system.
Abort OEM reset if user aborts the flash drive selection instead of
looping forever. (Canceling the confirmation still loops to retry but
it is possible to exit by aborting the repeated menu.)
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Warn user if connected usb block device is less then 128mb, since creating LUKS container of less then 8mb might cause issues.
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
Prompt for TPM owner password internally within tpm2_counter_create.
Add tpm1_counter_create to prompt for password internally. Wipe the
cache in either if the operation fails, in case the password was
incorrect.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
- document why shred is still called under functions:check_tpm_counter for safety and add TODO there
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
