Add CONFIG_TPM_NO_LUKS_DISK_UNLOCK to allow Librem boards to opt
out of using TPM to store LUKS key, and use it to guard the user
option to add the disk encryption key to the TPM.
Select this option for all Librem boards; all other boards which
select CONFIG_TPM=y will have no change in functionality.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
mount-usb switched to dynamic USB device detection a while back,
so eliminate instances of CONFIG_BOOT_USB_DEV, and derive the
mounted USB device from /etc/mtab in the one place where it's
actually needed (usb-scan). Clean up areas around calls to
mount-usb for clarity/readability.
Addresses issue #673
Test: Build Librem 13v4, boot ISO file on USB
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Commit 6b5adcca moved the call to enable_usb from gui-init
to init and guarded it with CONFIG_USB_KEYBOARD, but it was
missed that this is needed for the clean boot check logic
when a librem key is used. Add the call back to gui-init
and guard it properly
Test: clean_boot_detect works properly on a librem 13v4
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Some (out of tree) servers require use of a USB keyboard, and need
the USB kernel modules loaded prior to checking for keypress to enter
a recovery console. Since loading the modules affects the value in PRC5
and can cause issues putting a LUKS key in TPM, guard the loading of the
USB modules with CONFIG_USB_KEYBOARD and remove the unguarded call from
gui-init.
This should resolve issues #603 and #674.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Not setting USB_FAILED when call to mount-usb succeeds results
in a spurious 'sh: 0 unknown operand' error printed to console.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Since the custom password is used to set the GPG admin
password as well as the TPM and GPG user passwords, an
8-character minimum is required. Inform the user of this,
and validate custom password length upon entry.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
If /boot isn't mounted, we can't read the HOTP counter, so no
point in reading from the TPM. This speeds up getting to the
main menu in the case of an inaccessible or non-existant /boot.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Update text on TOTP error prompt to provide better
guidance for users following the use of the OEM
factory reset function
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
If kexec-sign-config fails due to GPG key not present,
the double die() results in a kernel panic (and if it didn't,
/boot would be left mounted RW). Fix this by removing call to
die() and ensuring /boot remounted RO regardless checksum
update success or failure.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Normally we resort to default passwords for OEM reset, however we have a
use case where it would be convenient to set a custom password instead.
This patch adds a simple prompt (that defaults to the defaults if you
hit Enter) that enables someone using the OEM reset to enter a single
password that will replace the defaults (TPM, GPG Admin, GPG User).
If the user chooses to flash a "cleaned" ROM (not persisting settings
or GPG keys) then the signatures on /boot are no longer valid, so clear
them out. This allows for the OEM factory reset prompt to be shown on
the next boot.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Users may wish to temporarily boot an OS from a drive other than
their primary boot drive, without changing the default and saving
to ROM. Mounting /boot after changing the device selection
facilitates this by allowing the user to then choose an unsafe boot
from the newly-selected boot drive.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
when commit [928f003] config-gui: add 'Full Reset' option
was added, the bottom end of the save config option was
accidentally truncated; restore it to fix save config option
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Add a check to determine if first boot after flashing a cleaned
ROM, and prompt user to run the OEM Factory Reset if so
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Add an OEM Factory Reset menu option, which performs an
unattended reset and configuration of the device's TPM,
GPG security token, and boot device / boot selection.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Add oem-factory-reset script which performs an unattended
reset and configuration of the device's TPM, GPG security token,
and boot device / boot selection.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Add function to detect boot device. Start by checking
CONFIG_BOOT_DEV, then iterate thru all bootable partitions.
Check if partition is mountable, contains grub directory.
Update CONFIG_BOOT_DEV and mount on /boot if successful.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
