Exception: scripts sourcing/calls within etc/ash_functions continues to use old TRACE functions until we switch to bash completely getting rid of ash.
This would mean getting rid of legacy boards (flash + legacy boards which do not have enough space for bash in flash boards) once and for all.
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
gui-init: make sure that reseal_tpm_disk_decryption_key happens only on successful TOTP/HOTP sealing, reusing cached TPM Owner password
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
Changes:
- As per master: when TOTP cannot unseal TOTP, user is prompted to either reset or regenerate TOTP
- Now, when either is done and a previous TPM Disk Unlock Key was setuped, the user is guided into:
- Regenerating checksums and signing them
- Regenerating TPM disk Unlock Key and resealing TPM disk Unlock Key with passphrase into TPM
- LUKS header being modified, user is asked to resign kexec.sig one last time prior of being able to default boot
- When no previous Disk Unlock Key was setuped, the user is guided into:
- The above, plus
- Detection of LUKS containers,suggesting only relevant partitions
- Addition of TRACE and DEBUG statements to troubleshoot actual vs expected behavior while coding
- Were missing under TPM Disk Unlock Key setup codepaths
- Fixes for #645 : We now check if only one slots exists and we do not use it if its slot1.
- Also shows in DEBUG traces now
Unrelated staged changes
- ash_functions: warn and die now contains proper spacing and eye attaction
- all warn and die calls modified if containing warnings and too much punctuation
- unify usage of term TPM Disk Unlock Key and Disk Recovery Key
On platforms using CONFIG_BOOT_EXTRA_TTYS multiple processes may try to
access TPM at the same time, failing with EBUSY. The order of execution
is unpredictable, so the error may appear on main console, secondary one,
or neither of them if the calls are sufficiently staggered. Try up to
three times (including previous one) with small delays in case of error,
instead of immediately scaring users with "you've been pwned" message.
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Some prompts were missed when changing to 0 80 the first time around,
and some new ones were added thinking that size was intentional.
Replace '16 60' with '0 80' globally.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Use CONFIG_BRAND_NAME to control the brand name displayed in the UI.
Override by setting BRAND_NAME when building, either in the Makefile or
on the command line.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Blob jail provides device firmware blobs to the OS, so the OS does not
have to ship them. The firmware is passed through the initrd to
/run/firmware, so it works with both installed and live OSes, and there
are no race conditions between firmware load and firmware availability.
The injection method in the initrd is specific to the style of init
script used by PureOS, since it must add a copy command to copy the
firmware from the initrd to /run. If the init script is not of this
type, boot proceeds without device firmware.
This feature can be enabled or disabled from the config GUI.
Blob jail is enabled automatically if the Intel AX200 Wi-Fi module is
installed and the feature hasn't been explicitly configured.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Restricted Boot mode only allows booting from signed files, whether that
is signed kernels in /boot or signed ISOs on mounted USB disks. This
disables booting from abitrary USB disks as well as the forced "unsafe"
boot mode. This also disables the recovery console so you can't bypass
this mode simply by running kexec manually.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
pause_automatic_boot() prompts that an automatic boot is about to occur
and allows the user to interrupt it.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Currently Heads will check files in /boot for tampering before booting
into a system. It would be nice if you could use the trusted environment
within Heads and extend this to check files in / itself. This new script
adds that functionality, however due to the length of time it takes to
perform these kinds of checks, it doesn't run automatically (yet).
This feature can be configured from the config GUI - the root device/
directories to check can be set, and it can be configured to run during
boot.
To make this a bit easier to use, I added a feature to detect whether
the hash file exists and if not, to display a more limited menu to the
user guiding them to create the initial hash file. Otherwise it will
display the date the file was last modified, which can be useful to
determine how stale it is.
Reduce friction when generating a new TOTP/HOTP secret by eliminating
an unnecessary 'press enter to continue' prompt following QR code
generation, and by attempting to use the default admin PIN set by
the OEM factory reset function. Fall back to prompting the user
if the default PIN fails.
Also, ensure error messages are visible to users before being returned
back to the GUI menu from which they came by wrapping existing calls to die()
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
On machines without a TPM, we'd still like some way for the BIOS to
attest that it has not been modified. With a Librem Key, we can have the
BIOS use its own ROM measurement converted to a SHA256sum and truncated
so it fits within an HOTP secret. Like with a TPM, a malicious BIOS with
access to the correct measurements can send pre-known good measurements
to the Librem Key.
This approach provides one big drawback in that we have to truncate the
SHA256sum to 20 characters so that it fits within the limitations of
HOTP secrets. This means the possibility of collisions is much higher
but again, an attacker could also capture and spoof an existing ROM's
measurements if they have prior access to it, either with this approach
or with a TPM.
Signed-off-by: Kyle Rankin <kyle.rankin@puri.sm>
TPM password must be 1-32 characters. Loop if the password is not
valid or the repeated password doesn't match, so the user can try
again.
Move prompt_new_owner_password to functions and use in both gui-init
and tpm-reset.
Fixes#1336
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
These were still writing some debugging output containing flags and
PCRs even when debug was not enabled. Use DEBUG.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
We just set the TPM owner password, so there's no need to make the user
enter it again. Eliminates some failure modes if the user mistypes it
or enters the wrong password.
Allow optionally passing in the TPM owner password in tpmr seal,
check_tpm_counter(), seal-totp, and generate_totp_htop(). The user is
still prompted if the password is needed but was not provided, so
existing uses in other contexts continue to work unchanged.
Prompt for the password in reset_tpm() and pass it down to each of the
above.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
gui-init: do not consume two unseal attempt to unseal both totp and hotp + cosmetic changes (slow down TPM DA lockout)
kexec-seal-key: Add DEBUG statement for PCR precalc
seal-totp: add DEBUG statements regarding skipping of PCR5 and PCR6 involvement into TOTP/HOTP sealing ops
seal-hotpkey: Add DEBUG statements related to reuse of TOTP sealed secret
tpmr: add DO_WITH_DEBUG calls to output pcrread and extend calls
tpmr: typo correction stating TRACE calls for tpm2 where it was for tpm1
tpmr: add DO_WITH_DEBUG calls for calcfuturepcr
functions: Cosmetic fix on pause_recovery asking user to press Enter to go to recovery shell on host console when board defines CONFIG_BOOT_RECOVERY_SERIAL
Not so related but part of output review and corrections:
kexec-insert-key: cosmetic changes prepending "+++" to disk related changes
kexec-save-default: cosmetic changes prepending "+++" to disk related changes
config/coreboot-qemu-tpm*.config: add ccache support for faster coreboot rebuild times
Most logic throughout Heads doesn't need to know TPM1 versus TPM2 (and
shouldn't, the differences should be localized). Some checks were
incorrect and are fixed by this change. Most checks are now unchanged
relative to master.
There are not that many places outside of tpmr that need to
differentiate TPM1 and TPM2. Some of those are duplicate code that
should be consolidated (seal-hotpkey, unseal-totp, unseal-hotp), and
some more are probably good candidates for abstracting in tpmr so the
business logic doesn't have to know TPM1 vs. TPM2.
Previously, CONFIG_TPM could be variously 'y', 'n', or empty. Now it
is always 'y' or 'n', and 'y' means "any TPM". Board configs are
unchanged, setting CONFIG_TPM2_TOOLS=y implies CONFIG_TPM=y so this
doesn't have to be duplicated and can't be mistakenly mismatched.
There were a few checks for CONFIG_TPM = n that only coincidentally
worked for TPM2 because CONFIG_TPM was empty (not 'n'). This test is
now OK, but the checks were also cleaned up to '!= "y"' for robustness.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Resetting the TPM invalidates the primary handle hash, and
kexec-save-default only generates a hash if none exists. Remove the
hash file when it is invalidated.
OEM reset and "Reset Configuration" both already remove all kexec
files.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
-coreboot support of TPM v2.0 (shared config for TPM2 support across all 4 previous variations)
-swtpm set to be launched under TPM v2.0 mode under board config
-Documentation file under each board.md softlinks to qemu-coreboot-fbwhiptail-tpm1.md (which has been generalized)
This is skeleton for TPM v2 integration under Heads
-------------
WiP
TODO:
- libcurl cannot be built as a tpm2-tools dependency as of now not sure why. curl currently needs to be added in board config to be built
- Note: tpm-reset (master and here) needs some review, no handle of no tpm use case. Caller is responsible to not call it otherwise does nothing
- init tries to bind fd and fails currently
- Note: Check if whiptail is different of fbwhiptail in clearing screen. As of now every clear seems to be removed, still whiptail clears previous console output
- When no OS' /boot can be mounted, do not try to TPM reset (will fail)
- seal-hotpkey is not working properly
- setting disk unlock key asks for TPM ownership passphrase (sealing in NV requires ownership, but text is misleading user as if reowning TPM)
- We should cache input, feed tpm behind the scene and wipe passphrase and state clearly that this is TPM disk unlock kye passphrase.
- primary key from TPM2 is invalid most of the time from kexec-select-boot and verifying global hashes but is setuped correctly at disk unlock key setup
- would be nice to take advantage of bash function tracing to understand where we are for debugging purposes, code takes ash in consideration only
- tpmr says it implements nv calls but actually doesn't. Removing those falsely wrapped functions would help.
- Implementing them would be better
- REVIEW TODOS IN CODE
- READD CIRCLECI CONFIG
Current state:
- TPM unseal works without disk unlock key and generates TOTP properly (was missing die condition at unseal to not produce always good TOTP even if invalid)
- TPM disk encryption key fails. Hypothesis is that sealing with USB drivers loaded and measures in inconsistent with sealed with/without.
- TPM disk unsealing happens without USB modules being loaded in non-HOTP setup. This fails.
- Current tests are with fbwhiptail (no clear called so having traces on command line of what happens)
- Testing with HOTP implementation for sealing/unsealing since that forces USB module loads on each boot to remove this from failing possibilities
- Add TRACE function tracing output under etc/functions, depending on CONFIG_ENABLE_FUNCTION_TRACING_OUTPUT enabled in board configs
- Replace current DEBUG to TRACE calls in code, reserving DEBUG calls for more verbose debugging later on (output of variables etc)
- add 'export CONFIG_ENABLE_FUNCTION_TRACING_OUTPUT=y' in qemu-coreboot(fb)whiptail-tpm1(-hotp) boards to see it in action
If the user selects "continue to main menu" from an error, do not show
any more error prompts until reaching the main menu.
We still try to initialize everything (GPG, TOTP, HOTP) so that the
main menu can still show TOTP/HOTP if GPG is not configured, etc., but
no more prompts are shown after selecting "continue to main menu".
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
- initrd/bin/gui-init : Add two additional menu options to LUKS reencrypt and LUKS passphrase change, calling functions of initrd/bin/reencrypt-luks
- initrd/bin/gui-init : Add option F for EOM Factory Reset / Reownership when no public key is exported by key-init
oem-factory-reset: adapt code so that custom passphrases can be provided by user without changing oem factory reset workflow.
oem-factory-reset: output provisioned secrets on screen at the end of of the process.
oem-factory-reset: warn user of what security components will be provisioned with defaults/customs PINs prior of choosing not after
gui-init and oem-factory-reset: change OEM Factory Reset -> OEM Factory Reset / Re-Ownership to cover actual use cases
It is going to be enabled later anyway (if CONFIG_HOTPKEY=y), so it can
also be simplified by enabling it at the very beginning.
This enables USB keyboard consistently during all boot menus, including
the "No Bootable OS Found" prompt. It isn't a big deal for "normal"
laptop usage, but it is important for automatic tests and also
non-laptop systems.
When files in /boot fail hash verification, the list of files
can sometimes overflow the whiptail msgbox, preventing the
prompt and buttons to update checksums from showing. To mitigate
this, if # of files is > 10, use less to show the file list and
present a separate prompt to update the checksums once the file
list has been viewed.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
