sed -i '$a CONFIG_USBDEBUG=n' config/coreboot-*.config
grep -R CONFIG_COREBOOT_VERSION boards/ | awk -F "/" {'print $2'} | while read board; do if ! sudo make BOARD=$board coreboot.save_in_oldconfig_format_in_place > /dev/null 2>&1; then echo $board failed;fi; done
Note:
Boards that are unmaintained accumulates settings addition per the sed call.
Why deactivate:
- Well, this is equivalent of cbmem -c which gives way too much information from attacker.
TODO: add an helper later on so that builds aimed at testing coreboot version bump pass to release mode or something.
As of this commit, we accept that bricks might happen and that troubleshooting will be made in a case basis?!
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
Taken from : https://github.com/Nitrokey/heads/tree/temp-release-v2.3
- Move branding/Heads/bootsplash-1024x768.jpg -> branding/Heads/bootsplash.jpg (We don't care about the size. Make filename generic)
- Adapt all coreboot configs so bootsplash is adapted by BRAND_NAME CONFIG_BOOTSPLASH_FILE="@BRAND_DIR@/bootsplash.jpg"
- Reminders :
- Makefile changes Heads to defined BRAND_NAME in board config
- Makefile changes -e 's!@BRAND_DIR@!$(pwd)/branding/$(BRAND_NAME)!g'
- nv41/nv50
- coreboot oldefconfigs adapted by:
- make BOARD=nitropad-ns50 coreboot.modify_and_save_oldconfig_in_place
- make BOARD=nitropad-nv41 coreboot.modify_and_save_oldconfig_in_place
- linux oldefconfigs adapted by
- make BOARD=nitropad-nv41 linux.modify_and_save_oldconfig_in_place
- since this is shared config across nv41/ns50: it only needs to be done for a single board
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
Squash of #1502 + moving logo/bootsplash files under branding/Heads
- Move logos and bootsplashes from blobs to branding/Heads/
- Makefile: add support for BRAND_DIR which depends on BRAND_NAME which defaults to Heads if no branding
- Boards coreboot configs: change bootsplash directory to depend on BRAND_DIR (instead of BLOBS_DIR) in bootsplash enabled configs
- Branding/Heads/bootsplash-1024x768.jpg points to branding/Heads/d-wid-ThePlexus_coreboot-linuxboot-heads_background-plain_DonateQrCode.jpg
- xcf file deleted. Original still under #1502 to reuse for modification without recompressing (blobs/heads.xcf)
- CREDITS file created to point to original authors, remixers (Open for details)
- Thanks to: @d-wid for remixing Bing's AI generated Janus logo, @ThePlexus for Qubes Box concept and @ThrillerAtPlay for its matrix background
- intel igpu related - remove i915drmfb hacks and use simplefb and libgfxinit enabled fb
- coreboot 4.19: add patch to fix https://ticket.coreboot.org/issues/500. fbwhiptail still tears screen if in native 1366x769 though
- coreboot 4.19: add patch to enable linux tampoline handle coreboot framebuffer (merged https://review.coreboot.org/c/coreboot/+/76431)
- coreboot 4.19: add patch to enable coreboot to apply jpeg voodoo to create bootsplash.jpeg injected in cbfs at build time + CircleCI apt imagemagick
- (Thanks Nico Huber @icon again for above patches!)
- coreboot configs: adapt VESAFB/LIBGFXINIT to use maximum fb height/width
- coreboot configs for iGPU only: CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH to native size
- coreboot configs for dGPU based on Optional VBIOS injected: VESAFB set to 1280x1024 (maximum possible).
Details:
coreboot configs: remove CONFIG_LINUX_COMMAND_LINE="drm_kms_helper.drm_leak_fbdev_smem=1 i915.enable_fbc=0"
- Those were needed to expose i915drmfb driver prior of efifb working.
Remove CONFIG_NO_GFX_INIT from configs having CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE=y
Add CONFIG_BOOTSPLASH_IMAGE from configs having CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE=y
Add CONFIG_LINEAR_FRAMEBUFFER from configs having CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE=y
Set BOOTSPLASH parameters to match bootsplash and jpeg requirements
+CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=768
+CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=1024
+CONFIG_BOOTSPLASH=y
Others paramaters defined per board default setting with coreboot.save_oldconfig_in_place helper
- add additional kernel boot params for i915 where needed:
- adds : drm_kms_helper.drm_leak_fbdev_smem=1 i915.enable_fbc=0 ( to permit kexec into vesa fb of kexec'ed kernel for i915 driven gpus without framebuffer compression, leaking smem fbdev address for kexec to pickup )
The calculations outlined at https://github.com/osresearch/heads/pull/1282#discussion_r1072473677
Sums to having 'ifdtool -f layout.txt ifd_shrinked.bin && cat layout.txt'
The example for T440p:
00000000:00000fff fd
00021000:00bfffff bios
00003000:00020fff me
00001000:00002fff gbe
Here: 00bfffff-00021000=BDEFFF
Which is exact result of @rbeslow's calculations.
There is an issue on haswell, maybe because of car, maybe because of non native memory init blob.
But this is not the case for xx20/xx30 boards.
This makes configs much less dependent on directory layout.
As of this commit the following variables are supported:
* @BOARD_BUILD_DIR@ - absolute path under build/
* @BLOB_DIR@ - absolute path to blobs/
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
- xx30 legacy boards (x230, x230-flash, t430, t430-flash) now rely also on coreboot 4.13
- DOWNSIDE: x230 and t430 legacy boards now rely on WHIPTAIL (NOT FBWhiptail) to have enough space to fit under 7mb)
- xx20 boards moved to 4.13 (no need of xx20-flash boards here since single SPI boards with 7.5mb useable since blobs scripts are required)
- DOWNSIDE: all xx20 boards now have dropbear deactivated, while still having ethernet driver in.
- qemu-coreboot and qemu-coreboot-fbwhiptail switched to coreboot 4.13 WITHOUT TPM SUPPORT (with cryptsetup 2.x support)
- DOWNSIDE:
- coreboot-qemu board CBFS_SIZE=0x700000 -> 0x750000
- coreboot-qemu-fbwhiptail CBFS_SIZE=0x750000 -> 0x780000
- CircleCi build recipe removes 4.8.1 boards altogether
- KGPE-D16 workstation is used as new base build to save workspace layer (we removed one workspace layer)
- Removing one workspace layer will save approx 2 hours of build time on fresh builds
- Removing one coreboot version will save us approx 2 hours of build time on fresh builds
- KGPE-D16 will stay to coreboot 4.11 until forward notice.
- All other board configs SHOULD be built on latest coreboot versions
- all: coreboot NO_POST for all boards
- all: coreboot NO_GFX_INIT (linux payload does the graphic init)
- all: coreboot TPM_MEASURED_BOOT (no more patches under Heads for measured boot)
- all: coreboot DRIVERS_PS2_KEYBOARD (fixes no keyboard on soft reboot and potentially xx30t xx20t fix for random raw keyboard (to be tested)
- all: coreboot removal of DEFAULT_CONSOLE_LOGLEVEL_5 under some boards
- all: coreboot removal of "loglevel=3" under some linux command line options booting Heads kernel
- all: coreboot removal of DEBUG_SMM_RELOCATION (unneeded)
- all: coreboot INCLUDE_CONFIG_FILE and COLLECT_TIMESTAMPS for all boards
- all: coreboot CONSOLE_SERIAL present on all boards
- all: coreboot add VBT
- all: board configs switch to cryptsetup2
xx20 hotp-maximized boards:
- removal of dropbear (not enough space to have htop + dropbear)
txx0 boards coreboot:
- USE_OPTION_TABLE and STATIC_OPTION_TABLE added (todo: check T430 boards optimization and find issue/PR and ammend this commit)
