Update to 1.3. Includes navigation improvements for devices with just
up/down/Enter keys, for Librem 11.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Update all Librems except L1UM (but including L1UM v2) to Linux 6.1.8.
Use coreboot native graphics init. Raise maximum framebuffer size for
laptops to 3840x2160 (desktops default to this, but laptops default
to a lower value). Remove DRM modules from Linux 6.1.8 and add EFIFB.
Remove Heads kernel command line options relating to IOMMU and i915,
which are no longer needed. Remove OS kernel options relating to
IOMMU.
For Librem 13/15/14/Mini, this fixes issues booting with 4K displays
attached, which were resulting in crashes due to the framebuffer memory
not being reserved properly. memtest86+ now passes with a 4K display
attached.
For Librem L1UM v2, framebuffer boot now works.
Librem L1UM remains on Linux 5.10 with Heads kernel graphic init
(framebuffer boot still does not work). coreboot 4.11 has native
graphics init for Aspeed, but only in text mode. Backporting the
linear framebuffer support appears to be possible - the patch applied
cleanly - but it did not work initially and will need more
investigation.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Improve speed by pre-filtering only for lines containing any tokens of
interest to flashrom_progress_tokenize().
Improve reliability by avoiding dropping tokens that cross a stream
buffer boundary. Occasionally, a token could be missed if it crosses a
stream buffer boundary, due to read timing out too quickly before the
next buffer is flushed. If this was a state-changing token,
flashrom_progress() would hang forever.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Enable the coreboot CMOS option table, which initializes CMOS if the
checksum is not valid.
There is now a checksum in the CMOS layout since 4.21, update it when
updating the Mini v1/v2 EC power-on setting.
coreboot 4.21 will reset the CMOS settings during the first boot, since
there was no checksum in prior releases. Heads will restore the
automatic power-on setting during init based on config.user.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
This is 4.21-Purism-1 plus a fix for native graphics init on Mini
v1/v2: HDMI1 is enabled so passive DisplayPort to DVI/HDMI adapters
will work.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
* use GPG_ALGO as gpg key generation algorithm
* determine GPG_ALGO during runtime like this:
* if CONFIG_GPG_ALGO is set, use as preference
* adapt based on usb-token capabilities (currently only Nitrokey 3)
Rationale:
cpio -t alone cannot extract initrd past early cpio (microcode) in most packed initrd.
unpack_initramfs.sh already under master comes to the rescue, but its usage up to today was limited to pass firmware blobs to final OS under boards/librem_mini_v2
Debian OSes (and probably others) need to have cryptroot/crypttab overriden directly, otherwise generic generation of crypttab is not enough.
Extracting crypttab and overriding directly what is desired by final OS and exposed into /boot/initrd is the way to go otherwise hacking on top of hacks.
This brings default packed modules under Heads to 5 modules, which needs to be deactivate in board configs if undesired:
user@heads-tests-deb12:~/heads$ grep -Rn "?= y" modules/ | grep -v MUSL
modules/zlib:1:CONFIG_ZLIB ?= y
modules/zstd:3:CONFIG_ZSTD ?= y
modules/exfatprogs:2:CONFIG_EXFATPROGS ?= y
modules/busybox:2:CONFIG_BUSYBOX ?= y
modules/e2fsprogs:2:CONFIG_E2FSPROGS ?= y
Changes:
- As per master: when TOTP cannot unseal TOTP, user is prompted to either reset or regenerate TOTP
- Now, when either is done and a previous TPM Disk Unlock Key was setuped, the user is guided into:
- Regenerating checksums and signing them
- Regenerating TPM disk Unlock Key and resealing TPM disk Unlock Key with passphrase into TPM
- LUKS header being modified, user is asked to resign kexec.sig one last time prior of being able to default boot
- When no previous Disk Unlock Key was setuped, the user is guided into:
- The above, plus
- Detection of LUKS containers,suggesting only relevant partitions
- Addition of TRACE and DEBUG statements to troubleshoot actual vs expected behavior while coding
- Were missing under TPM Disk Unlock Key setup codepaths
- Fixes for #645 : We now check if only one slots exists and we do not use it if its slot1.
- Also shows in DEBUG traces now
Unrelated staged changes
- ash_functions: warn and die now contains proper spacing and eye attaction
- all warn and die calls modified if containing warnings and too much punctuation
- unify usage of term TPM Disk Unlock Key and Disk Recovery Key
prepare_thumb_drive: default to creating 10% LUKS container on usb drive, prompts for passphrase is not provided and scan drives if no --device specified
NOTE: qemu usb_thumb drive of 128 mb are not big enough so that 10% of it (12mb) can be used to create thumb drive.
Adds:
- e2fsprogs to support ext4 filesystem creation through mke2fs
- add /etc/mke2fs.conf so that mke2fs knows how to handle ext2/ext3/ext4
- removes mke2fs support from busybox
- bump busybox to latest version which adds cpu accelerated hash functions (not needed per se here)
- Adds exfatprogs to have mkfs.exfat and fsck.exfat
- Adds prepare_thumb_drive /etc/luks-functions to be able to prepare a thumb drive with percentage of drive assigned to LUKS, rest to exfat
- Modify most board configs to test space requirements failing
- Talos2 linux config: add staging Exfat support
- Make e2fsprogs and exfatprogs included by default unless explicitely deactivate in board configs
- Change cryptsetup calls : luksOpen to open and luksClose to close to addresss review
- etc/luks_functions: cleanup
GOAL here is to have secure thumb drive creation which Heads will be able to use to backup/restore/use generated GPG key material in the future (next PR)
