Use common password prompt logic in tpm-reset rather than duplicating
in tpmr reset.
Use common logic in config-gui.sh to reset the TPM.
Use common logic in oem-factory-reset to reset TPM. Fixes extra
prompts for TPM2 owner password even when choosing to use a common
password. Fix sense of "NO TPM" check in TOTP generation (which only
happened to work because CONFIG_TPM is empty for TPM2).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
$CONFIG_TPM needs to be quoted, or [ syntax is incorrect when it's
empty. Fixes errors in console with TPM2 (but behavior was correct due
to [ still returning false as expected).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Resetting the TPM creates a new primary object, and there is no reason
for kexec-save-default to sign an old hash. Always update the hash
instead of creating it only if it doesn't exist.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Resetting the TPM invalidates the primary handle hash, and
kexec-save-default only generates a hash if none exists. Remove the
hash file when it is invalidated.
OEM reset and "Reset Configuration" both already remove all kexec
files.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
-coreboot support of TPM v2.0 (shared config for TPM2 support across all 4 previous variations)
-swtpm set to be launched under TPM v2.0 mode under board config
-Documentation file under each board.md softlinks to qemu-coreboot-fbwhiptail-tpm1.md (which has been generalized)
This is skeleton for TPM v2 integration under Heads
-------------
WiP
TODO:
- libcurl cannot be built as a tpm2-tools dependency as of now not sure why. curl currently needs to be added in board config to be built
- Note: tpm-reset (master and here) needs some review, no handle of no tpm use case. Caller is responsible to not call it otherwise does nothing
- init tries to bind fd and fails currently
- Note: Check if whiptail is different of fbwhiptail in clearing screen. As of now every clear seems to be removed, still whiptail clears previous console output
- When no OS' /boot can be mounted, do not try to TPM reset (will fail)
- seal-hotpkey is not working properly
- setting disk unlock key asks for TPM ownership passphrase (sealing in NV requires ownership, but text is misleading user as if reowning TPM)
- We should cache input, feed tpm behind the scene and wipe passphrase and state clearly that this is TPM disk unlock kye passphrase.
- primary key from TPM2 is invalid most of the time from kexec-select-boot and verifying global hashes but is setuped correctly at disk unlock key setup
- would be nice to take advantage of bash function tracing to understand where we are for debugging purposes, code takes ash in consideration only
- tpmr says it implements nv calls but actually doesn't. Removing those falsely wrapped functions would help.
- Implementing them would be better
- REVIEW TODOS IN CODE
- READD CIRCLECI CONFIG
Current state:
- TPM unseal works without disk unlock key and generates TOTP properly (was missing die condition at unseal to not produce always good TOTP even if invalid)
- TPM disk encryption key fails. Hypothesis is that sealing with USB drivers loaded and measures in inconsistent with sealed with/without.
- TPM disk unsealing happens without USB modules being loaded in non-HOTP setup. This fails.
- Current tests are with fbwhiptail (no clear called so having traces on command line of what happens)
- Testing with HOTP implementation for sealing/unsealing since that forces USB module loads on each boot to remove this from failing possibilities
- Add TRACE function tracing output under etc/functions, depending on CONFIG_ENABLE_FUNCTION_TRACING_OUTPUT enabled in board configs
- Replace current DEBUG to TRACE calls in code, reserving DEBUG calls for more verbose debugging later on (output of variables etc)
- add 'export CONFIG_ENABLE_FUNCTION_TRACING_OUTPUT=y' in qemu-coreboot(fb)whiptail-tpm1(-hotp) boards to see it in action
- kexec-save-default extracts initrd crypttab files and creates /boot/kexec_initrd_crypttab_overrides.txt entries pointing to /secret.key
- kexec-insert-key applies /boot/kexec_initrd_crypttab_overrides.txt to replace initrd's crypttabs files pointing to inserted /secret.key through cpio
- Both scripts inform the user of applied magic on screen
Not all distro put crypttab under /etc/ within initramfs, but finding it at
runtime needs unpacking, which may be hard to do, so it is made overridable
with a file at /boot/kexec_initrd_crypttab_path.txt, whose content could be
obtained with $ cpio -t < ${uncompressed_initrd} | grep crypttab .
The "target" field of the record within the crypttab stored in the root
file system for the luks container which is going to be unlocked via
kexec-insert-key should be modified into the same "luks-$uuid" format,
otherwise the boot sequence will get stuck when OS is trying to unlock them
again, in order to map them according to "target" fields written in the
crypttab stored in the root fs.
Adds check to detect device formatted as fat32 without partition table.
With fat32 fdisk does not print message about invalid partition table
and instead it'll print an empty table with header.
In both cases total output has the same length of 5 lines: 3 about
device info, 1 empty line and the 5th will be the table header or
invalid partition message.
Signed-off-by: Daniel Pineda <daniel.pineda@puri.sm>
Since it's not supposed to be shell safe, just display safe
inside double quotes, we can allow some more characters.
Also fix the escape character not being escaped.
busybox sha256sum will create a checksum file for uncommon file names
(e.g. /boot/foo"$\n"bar), but fail to verify that exact file.
https://bugs.busybox.net/show_bug.cgi?id=14226
Thus disallow all files in /boot/ with strange file names at the time of
signing for now. Verifying in the presence of new files with such file
names in /boot/ is no issue for the kexec_tree verification due to the
previously implemented escaping mechanism.
Attempt to fix the following issues:
1. unescaped file names may let an attacker display arbitrary
whiptail prompts --> escape, original code by @JonathonHall-Purism
2. whiptail itself allows escape characters such as \n
--> use an escape character not used by whiptail, i.e. #
3. performance issues caused by diff'ing too early -->
only generate a diff to display to the user, if an actual issue is
found
If the user selects "continue to main menu" from an error, do not show
any more error prompts until reaching the main menu.
We still try to initialize everything (GPG, TOTP, HOTP) so that the
main menu can still show TOTP/HOTP if GPG is not configured, etc., but
no more prompts are shown after selecting "continue to main menu".
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
A lot of echo_entry() is now common to elf/multiboot/xen kernels, just
branch for the type-specific logic.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
If a boot option doesn't refer to a valid file for the kernel/initrd,
ignore it. Such an option is never bootable, because we would fail to
find the kernel/initrd. This could happen if the path contained GRUB
variables, or specified a device that wasn't /boot, etc.
This is checked before expanding GRUB variables. It's unlikely that
any kernel/initrd path containing variables would end up working when
all variables expand to nothing (since we do not handle GRUB
variables).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Some configs specify kernel/initrd paths relative to a device (often
found in a variable). Assume the device is the /boot partition and
ignore the device specification.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Extract exclusion for unpartitioned block device of partitioned media
to gui_functions, and exclude them even if kernel hasn't listed the
partitions yet. (Fixes flash/USB boot prompts incorrectly trying to
use the whole device for partitioned media the first time.)
Ignore block devices of size 0, like empty USB SD card readers.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
- Have Talos II supported by detecting correctly size of mtd chip (not internal: different flashrom output needs to be parsed for chip size)
- Read SPI content only once: 66% speedup (TOCTOU? Don't think so, nothing should happen in parallel when flashing insingle user mode)
- Have the main flash_progress loop not break, but break in flash_rom state subcases (otherwise, verifying step was breaking)
- Change "Initializing internal Flash Programmer" -> "Initializing Flash Programmer"
- Apply changes suggested by @SergiiDmytruk under https://github.com/osresearch/heads/pull/1230#issuecomment-1295332539 to reduce userland wasted time processing flashrom -V output
It specifies whitespace-separated list of console devices to run Heads
on in addition to the default one.
Example for board config:
export CONFIG_BOOT_EXTRA_TTYS="tty0 tty1"
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
EC signatures requires that the digest has the corresponding length. Removing the hardcoded sha2-256 hash function and adding support of sha2-384 and sha2-512 should allow using EC crypto.
- Take System Info changes from 06311ff068 (Thanks to @nestire)
- Move changes to seperate script under /bin/oem-system-info-xx30
- Add additional camera and wifi card IDs, add synaptic touchpad detection if kernel has module built in
Above changes squashed in this commit.
Since /etc/luks-functions are currently exporting passphrases tested good per cryptsetup to be reused in the code,
the logic calling both luks_reencrypt and luks_change_passphrase testing for non-empty luks_current_Disk_Recovery_Key_passphrase
was bogus.
This commit includes a new variable luks_new_Disk_Recovery_Key_desired which is set when reencryption is desired.
The 3 use cases (reencrypt+passphrase change, reencrypt no passphrase change and passphrase change alone now only test
for luks_new_Disk_Recovery_Key_desired and luks_new_Disk_Recovery_Key_passphrase_desired, nothing else.
network-init-reovery can be used to automatically set RTC clock to obtained NTP clock.
The script would fail if other devices devices previously registered on the network with the same MAC.
Consequently, maximized boards are detected here, and a full random MAC is generated and used instead of using hardcoded DE:AD:C0:FF:EE.
This continues to generate checksums and sign them per new GPG User PIN, but does not set a default boot option.
The user hitting Default Boot on reboot will go through having to setup a new boot default, which will ask him to setup a Disk Unlock Key if desired.
Otherwise, hitting Default Boot goes into asking the user for its Disk Recovery Key passphrase, and requires to manually setup a default boot option.
Simplify the menu options by removing the duplication of the entry name
in the menu selections; instead, use clear verbiage to distinish
between booting one time and making the default. And as the majority of
the boot menu is shown is when the grub entires have changed and the
user is prompted to select a new default, so make that the first/default
menu option.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Drop the duplicated kernel info which hurts readability, runs off the
end of the menu window. This also makes it easier to identify which
menu option is the default, and more closely resembles the grub menu
shown in a traditional BIOS boot.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
- initrd/bin/oem-factory-reset: adds a measured integrity output prior of prompts. Goal is for stating TOTP/HOTP/boot detached signed measurements prior of initiating a Re-Ownership, validating provisioned OEM state.
- initrd/bin/gui-init : Add two additional menu options to LUKS reencrypt and LUKS passphrase change, calling functions of initrd/bin/reencrypt-luks
- initrd/bin/gui-init : Add option F for EOM Factory Reset / Reownership when no public key is exported by key-init
oem-factory-reset: adapt code so that custom passphrases can be provided by user without changing oem factory reset workflow.
oem-factory-reset: output provisioned secrets on screen at the end of of the process.
oem-factory-reset: warn user of what security components will be provisioned with defaults/customs PINs prior of choosing not after
gui-init and oem-factory-reset: change OEM Factory Reset -> OEM Factory Reset / Re-Ownership to cover actual use cases
bin/kexec-parse-boot: test 2bb1f52bf5 that fix correctly comma seperated arguments.
Still TODO: when booting, Heads tries to find where the ISO with /dev/disk/by-label/ARCH_202202 wich is never brought up. uuids could, not sure why the label is not brought up correctly. Maybe an issue in the way Arch makes the ISO.
@tslilc : Any idea to continue #584 or modify #762?
It is going to be enabled later anyway (if CONFIG_HOTPKEY=y), so it can
also be simplified by enabling it at the very beginning.
This enables USB keyboard consistently during all boot menus, including
the "No Bootable OS Found" prompt. It isn't a big deal for "normal"
laptop usage, but it is important for automatic tests and also
non-laptop systems.
Show state of flashrom reads/writes by means of a progress bar,
as used in the Librem coreboot flashing scripts
v2: add adjustment for use with `--ifd`
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
-CircleCI addition.
-Removal of t530-flash, w530-flash boards, flash scripts and associated coreboot configs (no more legacy boards additions)
This is a merger of #1071, #1072 and #1073 so that test builds are available over CircleCI until osresearch/master CircleCI gets unlocked.
When files in /boot fail hash verification, the list of files
can sometimes overflow the whiptail msgbox, preventing the
prompt and buttons to update checksums from showing. To mitigate
this, if # of files is > 10, use less to show the file list and
present a separate prompt to update the checksums once the file
list has been viewed.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
- Fixed inversed HEIGHT and WIDTH usage
- Fixed height to 30 and width to 90 as everywhere else
This was causing a blank screen when whiptail without framebuffer (fbwhiptail) was used.
Actually, it seems like the width and height under whiptail calls are only taken into consideration under NEWT, not FBWHIPTAIL.
