Don't hash password used to seal an object. This limits the password
to 32-characters but avoids obfuscating the usage of the password. The
32-character limit is considered acceptable because password limits are
lower already (GPG token limits to 25 chars). We may allow >32 char
passwords in the future by hashing only if the password is >32 chars.
Always pass passwords as hex to tpm2-tools to avoid possible ambiguity
if the password begins with a control prefix like 'hex:' or 'file:'.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Set consistent dictionary lockout parameters suited to Heads. Disable
lockout reset by setting a random password.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
gui-init: do not consume two unseal attempt to unseal both totp and hotp + cosmetic changes (slow down TPM DA lockout)
kexec-seal-key: Add DEBUG statement for PCR precalc
seal-totp: add DEBUG statements regarding skipping of PCR5 and PCR6 involvement into TOTP/HOTP sealing ops
seal-hotpkey: Add DEBUG statements related to reuse of TOTP sealed secret
tpmr: add DO_WITH_DEBUG calls to output pcrread and extend calls
tpmr: typo correction stating TRACE calls for tpm2 where it was for tpm1
tpmr: add DO_WITH_DEBUG calls for calcfuturepcr
functions: Cosmetic fix on pause_recovery asking user to press Enter to go to recovery shell on host console when board defines CONFIG_BOOT_RECOVERY_SERIAL
Not so related but part of output review and corrections:
kexec-insert-key: cosmetic changes prepending "+++" to disk related changes
kexec-save-default: cosmetic changes prepending "+++" to disk related changes
config/coreboot-qemu-tpm*.config: add ccache support for faster coreboot rebuild times
We already have HMAC sessions for encryption and decryption, there's no
need to create an ad-hoc session in tpm2_unseal.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
tpm2-tools is able to log pcap files of TPM2 commands, which can be
inspected with wireshark. Add CONFIG_TPM2_CAPTURE_PCAP to capture
these from the tpmr wrapper, and enable for qemu TPM2 boards.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
TPM2 must be prepared for shutdown, or it may track an auth failure for
dictionary attack prevention (per the spec, to prevent an attack by
attempting to authenticate and then powering off the TPM before it can
update the nonvolatile counter).
Add tpmr shutdown to prepare for shutdown (no-op on TPM1). Invoke it
from poweroff and reboot.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Provide tpmr commands pcrread, pcrsize, calcfuturepcr, and seal for
both TPM1 and TPM2.
Combine seal logic for TPM1/TPM2 in seal-totp, kexec-seal-key. This is
essentially the TPM2 logic now that tpmr provides the same wrapped
commands for both TPM1 and TPM2.
Remove algorithm prefix from PCR list in tpmr unseal for consistency
with tpmr seal.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Update to branch including tpm pcrread until it is merged upstream. tpm
pcrread allows us to use the same logical flow for TPM1 and TPM2 in
seal operations.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
tpmr extend with -ic (extend with literal data) was adding a newline,
use echo -n so it only includes the data given in the hash.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Clean up TODO comments.
Clean up redirections for tpm2 pcrread, use bash redirect to command.
Use DO_WITH_DEBUG --mask-position to trace tpmr seal for TPM2 and hide
the password.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
No need to test whether bash is a symlink, bash ships on all boards
using the normal init script now.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Update OpenSSL to 3.0.8. Build with -Os. Install only libcrypto,
libssl is not currently needed. Don't buid tests.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Provide mask_param() function to uniformly mask secret parameters,
while still indicating whether they are empty.
Extend DO_WITH_DEBUG to allow masking a password parameter by position,
using mask_param(). Move from ash_functions to functions (isn't used
by ash scripts).
Mask password parameters in kexec-unseal-key and tpmr seal. Use
mask_param() on existing masked params in tpmr.
Trim more troubleshooting output from tpm2_extend() in tpmr.
Clarify tpmr kexec_finalize echo; it's the TPM's platform heirarchy,
users might not know what this was referring to.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Provide an HMAC session to tpm2 when unsealing with an auth policy.
The HMAC session is used for transport encryption.
This allows transport encryption to work when unsealing.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Remove dump of all PCRs from tpm2_extend, it was causing other errors
to roll off the screen before they could be inspected, and it's no
longer needed now that TPM2 is working.
Silence nonsense errors from unseal if TPM2 hasn't been reset. tpm2 -S
with a file that doesn't exist would complain that the parameter format
was not understood (looks like a script error), when the actual problem
was that the file doesn't exist yet. We can't try to unseal anyway
without a primary handle, so just exit unsuccessfully in that case.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Busybox no longer has CONFIG_BASH since we are deploying bash on most
boards. We also should clearly indicate which scripts cannot use
bashisms.
Change shebang in x230-flash.init, t430-flash.init, flash.sh to
/bin/ash. Execute /bin/sh for interactive shells.
Move key functions needed by those scripts to initrd/etc/ash_functions.
Source ash_functions instead of functions in those scripts, so any
bashisms in other functions won't break parsing of the script in ash.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
bash will not be the default interactive shell since readline support
increases the binary size significantly. Use /bin/sh (busybox ash) for
that.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
bash was accidentally dropped from bin_modules when reintroducing
CONFIG_BASH, put it back and depend on CONFIG_MODULES now.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
- legacy-flash boards have a single purpose: to flash BIOS region through flashrom.
- They do not need bash nor have space for it in their 4mb defined coreboot CBFS region
Test build to have legacy boards builds under osresearch#1292
Include bash in all builds. Remove CONFIG_BASH.
Remove CONFIG_BASH_IS_ASH from busybox configuration and clean up hacks
in modules/bash.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Disable readline features for interactive shell. This significantly
reduces the size of bash and doesn't affect scripting features. The
interactive shell still functions, but there is no history or command
line editing (backspace works, but arrows do not move cursor).
Enable -Os on bash for more size reduction.
This saves about 180KiB from the compressed initrd for
qemu-coreboot-fbwhiptail-tpm2-hotp, almost half the cost of adding
bash.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Use /bin/sh (ash in busybox builds) for interactive shells, not bash.
Preparation for trimming interactive features from bash to reduce size.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
The size parameter is actually the size of the sealed secret to TPM1,
not the unsealed data size. TPM2 does not observe the sealed secret,
so just ignore that parameter.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Provide tpmr unseal to unseal a file with TPM1 or TPM2. For TPM1, it
wraps tpm nv_readvalue and tpm unsealfile. For TPM2, it wraps tpm2
unseal.
kexec-unseal-key, seal-hotpkey, unseal-hotp, and unseal-totp no longer
need to differentiate TPM1/TPM2.
Fixes spurious shred errors on TPM2 that only apply to TPM1 (temporary
sealed secret file and shred are now internal to tpmr).
Fixes TPM1 disk unlock key unsealing due to logic errors relating to
exit status of tpmr unseal or tpm unsealfile (now always uses status of
tpmr unseal).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
TPM2 locks the platform heirarchy, flushes transient objects, and
flushes sessions. (This now cleans up sessions created during
startsession that previously were not cleaned up, although the OS might
flush all sessions as well.)
TPM1 currently does not do anything, but the command is accepted so
kexec-boot does not need to differentiate TPM1/2.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
TPM2 is only required to support password lengths up to its longest
hash size (32 chars for sha256). Pass the sha256 of the password
instead of the actual password so the password can be arbitrarily long.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Set flags 'fixedtpm|fixedparent|adminwithpolicy'. Plain password auth
is no longer allowed. For objects sealed with a password, the password
is part of the auth policy, so both PCRs and password must be satisfied
to unseal.
Tested by manually attempting to unseal disk unlock key with password:
tpm2 unseal -c 0x81000003 -p "<password>"
This now correctly returns an error indicating this auth method is not
allowed.
Relative to the documented default flags for tpm2_create:
* sign, decrypt: Not applicable to a sealed object, tpm2_create
automatically removed these from the defaults.
* fixedtpm, fixedparent: Kept
* sensitivedataorigin: Not applicable an object where the sensitive
data is not generated by the TPM.
* userwithauth: Removed this, "user" actions must satisfy auth policy.
* adminwithpolicy: Added this, "admin" actions must satisfy auth
policy.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
After saving a disk unlock key, if debug output is enabled, drop to
a recovery shell to allow inspection of debug output.
The script isn't intended to return from this point after sealing a
key - returning attempts to boot, which can't unseal the key.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Trace parameters to seal/unseal and some key tpm2 invocations. Trace
invocation of tpmr seal/unseal for disk unlock key.
Add DO_WITH_DEBUG() to trace a command and parameters, then execute it.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
When sealing/unsealing with a password, use a policy including both the
specified PCRs and the object password. Fixes sealing and unsealing
disk unlock key.
tpm2 seems to have a bug in parameter decryption when using a policy
session and password in this way, disable encryption in the policy
session as a workaround.
Flags still need to be set on the sealed object correctly, as the
password is normally allowed on its own as an alternative to policy
auth.
Add -Q to some tpm2 invocations to silence diagnostics on stdout.
Pass filename for unsealed secret rather than capturing from stdout
for robustness against tpm2 diagnostics on stdout.
Fix unseal result check in kexec-unseal-key.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
- /tmp/debug.log is created and appended by all TRACE and DEBUG calls in code
- fix some logic errors seen when no DEBUG entry were outputted in /tmp/debug.log
Always send password via stdin to tpm2 create, tpm2 unseal. The password
could being with things like 'file:', 'str:', 'pcr:' that would be
interpreted by tpm2.
Deduplicate the TPM1/2 code in kexec-unseal-key. The TPM2 code was not
actually prompting for the password or sending it to tpmr unseal.
Password is still not working yet though.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Most logic throughout Heads doesn't need to know TPM1 versus TPM2 (and
shouldn't, the differences should be localized). Some checks were
incorrect and are fixed by this change. Most checks are now unchanged
relative to master.
There are not that many places outside of tpmr that need to
differentiate TPM1 and TPM2. Some of those are duplicate code that
should be consolidated (seal-hotpkey, unseal-totp, unseal-hotp), and
some more are probably good candidates for abstracting in tpmr so the
business logic doesn't have to know TPM1 vs. TPM2.
Previously, CONFIG_TPM could be variously 'y', 'n', or empty. Now it
is always 'y' or 'n', and 'y' means "any TPM". Board configs are
unchanged, setting CONFIG_TPM2_TOOLS=y implies CONFIG_TPM=y so this
doesn't have to be duplicated and can't be mistakenly mismatched.
There were a few checks for CONFIG_TPM = n that only coincidentally
worked for TPM2 because CONFIG_TPM was empty (not 'n'). This test is
now OK, but the checks were also cleaned up to '!= "y"' for robustness.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Use common password prompt logic in tpm-reset rather than duplicating
in tpmr reset.
Use common logic in config-gui.sh to reset the TPM.
Use common logic in oem-factory-reset to reset TPM. Fixes extra
prompts for TPM2 owner password even when choosing to use a common
password. Fix sense of "NO TPM" check in TOTP generation (which only
happened to work because CONFIG_TPM is empty for TPM2).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
$CONFIG_TPM needs to be quoted, or [ syntax is incorrect when it's
empty. Fixes errors in console with TPM2 (but behavior was correct due
to [ still returning false as expected).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Resetting the TPM creates a new primary object, and there is no reason
for kexec-save-default to sign an old hash. Always update the hash
instead of creating it only if it doesn't exist.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
