A few lines in the documentation got truncated somehow. Restored the
swtpm instructions from some notes and rewrote the others.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
HOTP/TOTP secrets don't have to be printable. Use binary data to
include 160 bits of entropy instead of just 80.
The secret is still limited to 20 bytes. Most keys now support up to
40 bytes, but tpmtotp is still limited to 20 bytes.
Move the truncation to 20 bytes a bit later, for future improvements to
detect the key's actual limit.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
flash.sh had a special mode to read (like -r) and then sha256sum the
resulting file. This is no different from just a read followed by a
sha256sum, and the only caller also had logic to sha256sum a cached
file anyway.
Just use flash.sh -r and sha256sum the result.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Non-impactful action, first step for #1421 based on participation in testing of #1398 and prior non-tested PRs.
EDIT: last minute readd of x220-maximized boards (x220-maximized and x220-hotp-maximized boards).
x220 is still UNTESTED (legacy, manually extracting ifs, me and gbe).
EDIT: last minute readd of t440p-maximized boards (t440p-maximized and t440p-hotp-maximized boards).
Thanks to @srgrint for lat minute report that t440p and x220 were tested
----
Traces of commands used:
ls qemu-linuxboot* leopard* r630* s2600wf* tioga* winterfell* t420* t520* t440p* w530* kgpe* p8z77* x220* x230-maximized-fhd_edp* | grep ":" | awk -F ":" {'print $1'}| while read board; do mv $board/$board.config $board/UNTESTED_$board.config; done
ls qemu-linuxboot* leopard* r630* s2600wf* tioga* winterfell* t420* t520* t440p* w530* kgpe* p8z77* x220* x230-maximized-fhd_edp* | grep ":" | awk -F ":" {'print $1'}| while read dir; do mv $dir UNTESTED_$dir; done
ls UNTESTED* | grep ":" | awk -F ":" {'print $1'}| awk -F "UNTESTED_" {'print $2'} | while read line; do sed 's/'"$line"'/UNTESTED_'"$line"'/g' ../.circleci/config.yml -i ; done
quick fix of circleci:
sed -i 's/UNTESTED_UNTESTED/UNTESTED/g' ../.circleci/config.yml
sed -i 's/UNTESTED_UNTESTED/UNTESTED/g' ../.circleci/config.yml
sed -i 's/UNTESTED_UNTESTED/UNTESTED/g' ../.circleci/config.yml
Modify p8z77-m_pro-tpm1 hotp board config to include to their maximized counterpart
Enable the truncate coreutil.
CONFIG_BASE64 and CONFIG_BASH_IS_NONE just changed =n vs. not-set by
menuconfig, meaning is still the same.
initrd.cpio.xz went up by 512 bytes on Librem Mini v2 (probably the
minimum xz increment). busybox stripped binary did not change size.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Basic mode allows (but does not require) setting a default boot option.
Don't seal disk unlock keys in Basic mode.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Some prompts were missed when changing to 0 80 the first time around,
and some new ones were added thinking that size was intentional.
Replace '16 60' with '0 80' globally.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Since 'standard boot' was removed, empty "$option" only occurs due to
error now. Die with a specific error.
Now, we only proceed past ISO boot if no ISOs were present, meaning the
disk might be a plain bootable medium. Present a specific error for
restricted boot in that case.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
The whiptail prompt text was copied from the 'read' prompt but did not
actually have the Abort option. Add it.
The "s for standard boot" option was missing from whiptail. For plain
'read' it does not appear to revert to a normal boot, it actually went
on to try plain bootable USB on the same medium. It's not realistic
for a disk to be both directly bootable and contain ISOs, and this
option does not appear to have been missed since it was missing from
the whiptail/fbwhiptail version, which almost all boards use. Remove
it.
Handle canceling fbwhiptail with esc-esc the same as Abort.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
This feature doesn't require a TPM. The configuration GUI appears
either way, but the actual check was silently skipped on TPM-less
devices. Enable it even if there is no TPM.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Allow configuring the root hash feature when the variables are not set
initially. This worked on Librem boards because the boards all have
defaults for these variables, but didn't work when those defaults were
not present.
Fix set_config function to put quotes around an added variable's value.
Change load_config_value function to default to empty, so it can be
used with non-boolean variables. None of the existing callers cared
about the 'n' default (boolean variables should always be tested ="y"
or !="y" anyway).
Use load_config_value in config-gui.sh for boot device and the root
hash parameters, so unset defaults do not cause a failure. Improve the
prompts so the "current value" text only appears if there is a current
value. Use set_config instead of replace_config so the variables will
be added if needed.
Prevent enabling the root hash feature if it hasn't been configured
yet.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Update flashrom - in particular, this includes support for new chipsets
like Jasper Lake.
CONFIG_INTERAL_X86 was created so CONFIG_INTERNAL could apply to other
platforms, enable it for x86.
The default build target now requires sphinx, just build flashrom
itself.
Update flashrom_progress - filter out noise in newer flashrom that
chokes the progress bar implementation, make size detection more
robust, improve progress bar implementation slightly.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Co-signed by: Thierry Laurion <insurgo@riseup.net.
Since legacy boards do not have e1000e as opposed to maximized builds (no network), we also deactivate:
+# CONFIG_INET is not set
+# CONFIG_ETHTOOL_NETLINK is not set
+# CONFIG_NETDEVICES is not set
This makes gpg24 and newer flashrom bump possible
CONFIG_PREEMPT_NONE=y: Remove preemptiveness for servers. Under heads, we are single tasking. No point having this big thing in kernel https://lwn.net/Articles/746780/
IO scheduler: only enable CONFIG_MQ_IOSCHED_DEADLINE=y since we want maximum throughput and do not have concurrent tasks
CONFIG_CPU_ISOLATION=y : Enable CPU Isolation accross all boards: this permits to make sure that the kernel tasks running on a CPU are not distrurbed bu user tasks
CONFIG_MULTIUSER not defined: Removing cluttering since we are single root user under Heads anyway
CONFIG_IO_URING=y : limit number of copy operations between kernel and user space from apps
CONFIG_ZONE_DMA not defined: relevant for older hardware (less then 32bit addressing space)
CONFIG_X86_MPPARSE not defined: relevant for older smp systems
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is enabled and SCHEDUTIL is disabled: we want performance with CPU sched with deadline IO.
CONFIG_PERF_EVENTS_INTEL_UNCORE and CONFIG_PERF_EVENTS_INTEL_CSTATE not defined: we want max perf on Heads
CONFIG_X86_VSYSCALL_EMULATION not defined: no need for syscall emulation under Heads
CONFIG_SECCOMP not defined : usefull if BPF is enabled and used.
CONFIG_ACPI_SPCR_TABLE=y : usefull for serial redirection table and earlycon
CONFIG_PCI_MMCONFIG CONFIG_MMCONF_FAM10H unset but for kgpe-d16 which is either fam10h of fam15h
CONFIG_DM_SNAPSHOT=y CONFIG_DM_THIN_PROVISIONING=y so that recovery shell can provide LVM/DM functionality in later PR.
CONFIG_EXFAT_FS=y so that exfat preformated thumb drives can work out of the box
Adjust CONFIG_HW_RANDOM per platform, removing CONFIG_HW_RANDOM_TIMERIOMEM
Only support processor family needed per board (AMD only AMD, Intel only Intel, removing CONFIG_CPU_SUP_HYGON CONFIG_CPU_SUP_HYGON CONFIG_CPU_SUP_CENTAUR CONFIG_CPU_SUP_ZHAOXIN CONFIG_CPU_SUP_ZHAOXIN everywhere
qemu: support both AMD and INTEL as an exception for the above.
Removed unused compiled modules unpacked under modules.cpio
Removed not needed crypto modules compiled in or as modules, reviewed from https://github.com/osresearch/heads/issues/1396#issuecomment-1538780319 :
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_ESSIV=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_SHA256=y
Remove CONFIG_NO_GFX_INIT from configs having CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE=y
Add CONFIG_BOOTSPLASH_IMAGE from configs having CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE=y
Add CONFIG_LINEAR_FRAMEBUFFER from configs having CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE=y
Set BOOTSPLASH parameters to match bootsplash and jpeg requirements
+CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=768
+CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=1024
+CONFIG_BOOTSPLASH=y
Others paramaters defined per board default setting with coreboot.save_oldconfig_in_place helper
both linux/coreboot:
- save_in_defconfig_format_in_place : takes whatever coreboot config file for a make BOARD=xyz statement and saves it in defconfig
- save_in_oldefconfig_format_in_place : takes whatever coreboot config file for a make BOARD=xyz statement and saves it in oldefconfig
linux:
- linux.prompt_for_new_config_options_for_kernel_version_bump:
- The most useful helper as of now when doing kernel version bump.
- Requires to save current kernel config in oldconfig (make BOARD=xyz linux.save_in_oldefconfig_format_in_place) first, then bump kernel version in board config and then use that helper to review new options and save in tree.
- add additional kernel boot params for i915 where needed:
- adds : drm_kms_helper.drm_leak_fbdev_smem=1 i915.enable_fbc=0 ( to permit kexec into vesa fb of kexec'ed kernel for i915 driven gpus without framebuffer compression, leaking smem fbdev address for kexec to pickup )
