Activate dual console by default and restructure board config
Changing CONFIG_USB_BOOT_DEV to sdc1, adding back CONFIG_BOOT_STATIC_IP to 192.168.2.3, adding dual console to OpenBMC and tty0 in attempt to have QubesOS graphic installer which complains with no networking when attempting to start VNC
Adding dual console to OpenBmc and tty0
putting kgpe-d16-coreboot.conf in defconfig format
NO_HZ wasn't included in kernel config. Adding it.
Wasn't able to have both console firing up QubesOS gui installer, complaining about hvc1 console errors. Splitting up Workstation and server config. This one works for Worstation
Removing serial configuration and static IP stuff since we have a workstation here.
Seperate Workstation and Server board configurations until dual console truely works through QubesOS gui installation. kgpe-d16 board config removed until then.
Placing files in good directories
Corrrect flashrom options for kgpe-d16 server and workstation boards
kgpe-d16 linux: NO_HZ_IDLE instead of NO_HZ
kgpe-d16: seperate board for workstation to be AST and gui-init based, while kgpe-d16-> kgpe-d16_server
kgpe-d16_server: boots, shows ASpeed text on VGA, controllable through BMC via SSH.
kgpe-d16_workstation on ASpeed console. WIP. (Includes CIs configs to build server and workstation)
kgpe-d16_workstation in defconfig format
kgpe-d16 boards: pass from GPG to GPG2 board definitions
kgpe-d16_workstation : Adding Cairo and FbWhpitail in board config for gui-init to work in FB mode
kgpe-d16: removing plymouth.ignore-serial-consoles to fix server terminal output
kgpe-d16: bring par with staging branch https://gitlab.com/tlaurion/heads/commits/kgpe-d16_staging
kgpe-d16 : expressively export CONFIG_TPM=n
kgpe-d16_wokstation gui-init variables were missing
kgpe-d16 boards: add CONFIG_LINUX_USB_COMPANION_CONTROLLER so that usb is recognized
linux-kgpe-d16*: add support for Pike
kgpe-d16_workstation-usb_keyboard board support addition
kgpe-d16_server-whiptail: Add board and dependencies to have gui-init in whiptail (console mode, not FbWhiptail based
GitlabCI: kgpe-d16 fixes and upstream merge of change
kgpe-d16* board: add statement to fixate coreboot version to 4.8.1 for the moment
kgpe-d16: add missing config/linux-kgpe-d16_server-whiptail.config file
KGPE-D16: community work migration to coreboot 4.11 to fix issue #740
KGPE-D16 boards: Adding VBOOT+measured boot, musl-cross patch and 4.11 patch brought up per https://github.com/osresearch/heads/pull/709
kgpe-d16* boards: add VBOOT Kconfig patch per @miczyg1 recommendation under https://github.com/osresearch/heads/pull/795#issuecomment-671214637
KGPE-D16* coreboot configs: Add S3NV as a Runtime data whitelist (so that it is not measured at term) per @miczyg1 recommendation under https://github.com/osresearch/heads/pull/795#issuecomment-671214637
kgpe-d16 coreboot 4.11: add https://review.coreboot.org/c/coreboot/+/36908 patch
kgpe-d16 boards: add Linux kernel version where missing.
CircleCI: Add debug output on fail for kgpe-d16 board builds to bring par with upstream after rebasing on master
coreboot module: typo correction (tabs vs spaces)
CircleCI: trying to address "g++: fatal error: Killed signal terminated program cc1plus." happening under coreboot 4.11 and coreboot 4.12 builds
CircleCI: remove past addition to test recommendation from CircleCI: "resource_class: large"
CircleCi: Ok.... lets output dmesg content prior of other logs.... I'm out of ideas. Next step, ask CircleCI for support
At this stage:
- job's "make --load" is supposed to guarantee that the number of thread doesn't exhaust pass of a load of 2 (medium, free class, CircleCI has 32 cores so possibility of a load of 32)
- "--max_old_space_size=4096" in CircleCI environement is supposed to limit memory consumption to 4096Mb of memory, the max of a medium class free tier CircleCI node
CircleCI: remove verbose build (no more V=1), in case of failed build, find all logs modified in last minute and output each of them on console.
coreboot module: implement load average respect inside of problematic CI build for coreboot 4.11+ being killed in the action (32 cores with 4Gb ram get gcc OOM)
coreboot module: replace nproc by number of Gb actually available as number of CPUs, since each thread is expected to have 1Gb of ram.
CircleCI & coreboot config: fix merge conflict rebasing on master
coreboot 4.11 kgpe-d16 vboot patches addendum, credits goes to @Tonux599
Fix merge conflicts and make sure all boards are inside of CircleCI builds. PoC build for #867
2018-10-23 12:43:36 +00:00
|
|
|
CONFIG_USE_OPTION_TABLE=y
|
|
|
|
|
# CONFIG_COLLECT_TIMESTAMPS is not set
|
|
|
|
|
CONFIG_VENDOR_ASUS=y
|
|
|
|
|
CONFIG_UART_FOR_CONSOLE=1
|
|
|
|
|
CONFIG_BOARD_ASUS_KGPE_D16=y
|
|
|
|
|
CONFIG_DRIVERS_PS2_KEYBOARD=y
|
|
|
|
|
CONFIG_COREBOOT_ROMSIZE_KB_16384=y
|
|
|
|
|
CONFIG_SOUTHBRIDGE_AMD_SB700_33MHZ_SPI=y
|
|
|
|
|
# CONFIG_DRIVERS_INTEL_WIFI is not set
|
2020-09-22 22:54:57 +00:00
|
|
|
CONFIG_MEASURED_BOOT=y
|
Activate dual console by default and restructure board config
Changing CONFIG_USB_BOOT_DEV to sdc1, adding back CONFIG_BOOT_STATIC_IP to 192.168.2.3, adding dual console to OpenBMC and tty0 in attempt to have QubesOS graphic installer which complains with no networking when attempting to start VNC
Adding dual console to OpenBmc and tty0
putting kgpe-d16-coreboot.conf in defconfig format
NO_HZ wasn't included in kernel config. Adding it.
Wasn't able to have both console firing up QubesOS gui installer, complaining about hvc1 console errors. Splitting up Workstation and server config. This one works for Worstation
Removing serial configuration and static IP stuff since we have a workstation here.
Seperate Workstation and Server board configurations until dual console truely works through QubesOS gui installation. kgpe-d16 board config removed until then.
Placing files in good directories
Corrrect flashrom options for kgpe-d16 server and workstation boards
kgpe-d16 linux: NO_HZ_IDLE instead of NO_HZ
kgpe-d16: seperate board for workstation to be AST and gui-init based, while kgpe-d16-> kgpe-d16_server
kgpe-d16_server: boots, shows ASpeed text on VGA, controllable through BMC via SSH.
kgpe-d16_workstation on ASpeed console. WIP. (Includes CIs configs to build server and workstation)
kgpe-d16_workstation in defconfig format
kgpe-d16 boards: pass from GPG to GPG2 board definitions
kgpe-d16_workstation : Adding Cairo and FbWhpitail in board config for gui-init to work in FB mode
kgpe-d16: removing plymouth.ignore-serial-consoles to fix server terminal output
kgpe-d16: bring par with staging branch https://gitlab.com/tlaurion/heads/commits/kgpe-d16_staging
kgpe-d16 : expressively export CONFIG_TPM=n
kgpe-d16_wokstation gui-init variables were missing
kgpe-d16 boards: add CONFIG_LINUX_USB_COMPANION_CONTROLLER so that usb is recognized
linux-kgpe-d16*: add support for Pike
kgpe-d16_workstation-usb_keyboard board support addition
kgpe-d16_server-whiptail: Add board and dependencies to have gui-init in whiptail (console mode, not FbWhiptail based
GitlabCI: kgpe-d16 fixes and upstream merge of change
kgpe-d16* board: add statement to fixate coreboot version to 4.8.1 for the moment
kgpe-d16: add missing config/linux-kgpe-d16_server-whiptail.config file
KGPE-D16: community work migration to coreboot 4.11 to fix issue #740
KGPE-D16 boards: Adding VBOOT+measured boot, musl-cross patch and 4.11 patch brought up per https://github.com/osresearch/heads/pull/709
kgpe-d16* boards: add VBOOT Kconfig patch per @miczyg1 recommendation under https://github.com/osresearch/heads/pull/795#issuecomment-671214637
KGPE-D16* coreboot configs: Add S3NV as a Runtime data whitelist (so that it is not measured at term) per @miczyg1 recommendation under https://github.com/osresearch/heads/pull/795#issuecomment-671214637
kgpe-d16 coreboot 4.11: add https://review.coreboot.org/c/coreboot/+/36908 patch
kgpe-d16 boards: add Linux kernel version where missing.
CircleCI: Add debug output on fail for kgpe-d16 board builds to bring par with upstream after rebasing on master
coreboot module: typo correction (tabs vs spaces)
CircleCI: trying to address "g++: fatal error: Killed signal terminated program cc1plus." happening under coreboot 4.11 and coreboot 4.12 builds
CircleCI: remove past addition to test recommendation from CircleCI: "resource_class: large"
CircleCi: Ok.... lets output dmesg content prior of other logs.... I'm out of ideas. Next step, ask CircleCI for support
At this stage:
- job's "make --load" is supposed to guarantee that the number of thread doesn't exhaust pass of a load of 2 (medium, free class, CircleCI has 32 cores so possibility of a load of 32)
- "--max_old_space_size=4096" in CircleCI environement is supposed to limit memory consumption to 4096Mb of memory, the max of a medium class free tier CircleCI node
CircleCI: remove verbose build (no more V=1), in case of failed build, find all logs modified in last minute and output each of them on console.
coreboot module: implement load average respect inside of problematic CI build for coreboot 4.11+ being killed in the action (32 cores with 4Gb ram get gcc OOM)
coreboot module: replace nproc by number of Gb actually available as number of CPUs, since each thread is expected to have 1Gb of ram.
CircleCI & coreboot config: fix merge conflict rebasing on master
coreboot 4.11 kgpe-d16 vboot patches addendum, credits goes to @Tonux599
Fix merge conflicts and make sure all boards are inside of CircleCI builds. PoC build for #867
2018-10-23 12:43:36 +00:00
|
|
|
CONFIG_USER_TPM1=y
|
2020-09-22 22:54:57 +00:00
|
|
|
CONFIG_TPM_RDRESP_NEED_DELAY=y
|
Activate dual console by default and restructure board config
Changing CONFIG_USB_BOOT_DEV to sdc1, adding back CONFIG_BOOT_STATIC_IP to 192.168.2.3, adding dual console to OpenBMC and tty0 in attempt to have QubesOS graphic installer which complains with no networking when attempting to start VNC
Adding dual console to OpenBmc and tty0
putting kgpe-d16-coreboot.conf in defconfig format
NO_HZ wasn't included in kernel config. Adding it.
Wasn't able to have both console firing up QubesOS gui installer, complaining about hvc1 console errors. Splitting up Workstation and server config. This one works for Worstation
Removing serial configuration and static IP stuff since we have a workstation here.
Seperate Workstation and Server board configurations until dual console truely works through QubesOS gui installation. kgpe-d16 board config removed until then.
Placing files in good directories
Corrrect flashrom options for kgpe-d16 server and workstation boards
kgpe-d16 linux: NO_HZ_IDLE instead of NO_HZ
kgpe-d16: seperate board for workstation to be AST and gui-init based, while kgpe-d16-> kgpe-d16_server
kgpe-d16_server: boots, shows ASpeed text on VGA, controllable through BMC via SSH.
kgpe-d16_workstation on ASpeed console. WIP. (Includes CIs configs to build server and workstation)
kgpe-d16_workstation in defconfig format
kgpe-d16 boards: pass from GPG to GPG2 board definitions
kgpe-d16_workstation : Adding Cairo and FbWhpitail in board config for gui-init to work in FB mode
kgpe-d16: removing plymouth.ignore-serial-consoles to fix server terminal output
kgpe-d16: bring par with staging branch https://gitlab.com/tlaurion/heads/commits/kgpe-d16_staging
kgpe-d16 : expressively export CONFIG_TPM=n
kgpe-d16_wokstation gui-init variables were missing
kgpe-d16 boards: add CONFIG_LINUX_USB_COMPANION_CONTROLLER so that usb is recognized
linux-kgpe-d16*: add support for Pike
kgpe-d16_workstation-usb_keyboard board support addition
kgpe-d16_server-whiptail: Add board and dependencies to have gui-init in whiptail (console mode, not FbWhiptail based
GitlabCI: kgpe-d16 fixes and upstream merge of change
kgpe-d16* board: add statement to fixate coreboot version to 4.8.1 for the moment
kgpe-d16: add missing config/linux-kgpe-d16_server-whiptail.config file
KGPE-D16: community work migration to coreboot 4.11 to fix issue #740
KGPE-D16 boards: Adding VBOOT+measured boot, musl-cross patch and 4.11 patch brought up per https://github.com/osresearch/heads/pull/709
kgpe-d16* boards: add VBOOT Kconfig patch per @miczyg1 recommendation under https://github.com/osresearch/heads/pull/795#issuecomment-671214637
KGPE-D16* coreboot configs: Add S3NV as a Runtime data whitelist (so that it is not measured at term) per @miczyg1 recommendation under https://github.com/osresearch/heads/pull/795#issuecomment-671214637
kgpe-d16 coreboot 4.11: add https://review.coreboot.org/c/coreboot/+/36908 patch
kgpe-d16 boards: add Linux kernel version where missing.
CircleCI: Add debug output on fail for kgpe-d16 board builds to bring par with upstream after rebasing on master
coreboot module: typo correction (tabs vs spaces)
CircleCI: trying to address "g++: fatal error: Killed signal terminated program cc1plus." happening under coreboot 4.11 and coreboot 4.12 builds
CircleCI: remove past addition to test recommendation from CircleCI: "resource_class: large"
CircleCi: Ok.... lets output dmesg content prior of other logs.... I'm out of ideas. Next step, ask CircleCI for support
At this stage:
- job's "make --load" is supposed to guarantee that the number of thread doesn't exhaust pass of a load of 2 (medium, free class, CircleCI has 32 cores so possibility of a load of 32)
- "--max_old_space_size=4096" in CircleCI environement is supposed to limit memory consumption to 4096Mb of memory, the max of a medium class free tier CircleCI node
CircleCI: remove verbose build (no more V=1), in case of failed build, find all logs modified in last minute and output each of them on console.
coreboot module: implement load average respect inside of problematic CI build for coreboot 4.11+ being killed in the action (32 cores with 4Gb ram get gcc OOM)
coreboot module: replace nproc by number of Gb actually available as number of CPUs, since each thread is expected to have 1Gb of ram.
CircleCI & coreboot config: fix merge conflict rebasing on master
coreboot 4.11 kgpe-d16 vboot patches addendum, credits goes to @Tonux599
Fix merge conflicts and make sure all boards are inside of CircleCI builds. PoC build for #867
2018-10-23 12:43:36 +00:00
|
|
|
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8=y
|
|
|
|
|
CONFIG_PAYLOAD_LINUX=y
|
|
|
|
|
CONFIG_PAYLOAD_FILE="../../build/kgpe-d16_workstation-usb_keyboard/bzImage"
|
|
|
|
|
CONFIG_LINUX_COMMAND_LINE="nohz=on console=tty0 earlyprintk=tty0"
|
|
|
|
|
CONFIG_LINUX_INITRD="../../build/kgpe-d16_workstation-usb_keyboard/initrd.cpio.xz"
|
2021-01-06 11:03:53 +00:00
|
|
|
CONFIG_CPU_MICROCODE_CBFS_NONE=y
|
