ExternalVendorCode/heads
1
0
Fork 0
mirror of https://github.com/linuxboot/heads.git synced 2024-12-20 05:28:08 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
c2ec62bfcd
heads/patches/qubes-vmm-xen-4.6.5-28.patch

1006 lines
32 KiB
Diff
Raw Normal View History

Changed xen submodule to track Qubes Xen Closes #159
2017-06-24 03:01:20 +00:00
diff --git Makefile Makefile
index c210da9..522530f 100644
--- ./Makefile
+++ ./Makefile
@@ -153,6 +153,13 @@ update-repo-installer:
for pkg in $(xen-pkgs); do ln -f rpm/x86_64/$$pkg*.rpm ../installer/yum/qubes-dom0/rpm/; done
ln -f rpm/x86_64/xen-hvm-$(version)gui2*-$(release).$(DIST_DOM0)*.rpm ../installer/yum/qubes-dom0/rpm/
+xen-${version}/: get-sources verify-sources
+ tar xzvf xen-${version}.tar.gz
+ cd xen-${version} && ../apply-patches ../series.conf ../
+
+xen.gz: xen-${version}/
+ $(MAKE) -C xen-${version}/ xen
+
help:
@echo "Usage: make <target>"
@echo
diff --git apply-patches apply-patches
index b1c8468..74a4c20 100755
--- ./apply-patches
+++ ./apply-patches
@@ -6,8 +6,7 @@
USAGE="$0 [--vanilla] <series.conf> <patchdir> [symbol ...]"
-set -e
-set -o pipefail
+set -euf
if test $# -lt 2; then
echo "$USAGE" >&2
exit 1
@@ -17,10 +16,7 @@ SERIES_CONF=$1
PATCH_DIR=$2
shift 2
-(
- echo "trap 'echo \"*** patch \$_ failed ***\"' ERR"
- echo "set -ex"
- egrep -v '^\s*#|^\s*$' <"$SERIES_CONF" | \
- sed "s|^|patch -s -F0 -E -p1 --no-backup-if-mismatch -i $PATCH_DIR/|"
-) | sh
-
+for i in `egrep -v '^\s*#|^\s*$' < $SERIES_CONF`
+do
+ patch -s -F0 -E -p1 --no-backup-if-mismatch -i $PATCH_DIR/$i
+done
diff --git ./patches.heads/heads.patch ./patches.heads/heads.patch
new file mode 100644
index 0000000..0bc152c
--- /dev/null
+++ ./patches.heads/heads.patch
@@ -0,0 +1,942 @@
+diff --recursive -u ../xen-4.6.5-clean/xen/arch/x86/boot/head.S ./xen/arch/x86/boot/head.S
+--- ../xen-4.6.5-clean/xen/arch/x86/boot/head.S 2017-03-07 11:19:05.000000000 -0500
++++ ./xen/arch/x86/boot/head.S 2017-06-23 21:18:50.498798061 -0400
+@@ -86,6 +86,8 @@
+ cmp $MULTIBOOT_BOOTLOADER_MAGIC,%eax
+ jne not_multiboot
+
++#if 0
++
+ /* Set up trampoline segment 64k below EBDA */
+ movzwl 0x40e,%eax /* EBDA segment */
+ cmp $0xa000,%eax /* sanity check (high) */
+@@ -108,6 +110,12 @@
+ shl $10-4,%edx
+ cmp %eax,%edx /* compare with BDA value */
+ cmovb %edx,%eax /* and use the smaller */
++#else
++ // coreboot does not provide an Extended BIOS Data Area pointer
++ // just stash things the Multiboot structure, adjusted to bytes
++ mov MB_mem_lower(%ebx),%eax
++ shl $10-4,%eax
++#endif
+
+ 2: /* Reserve 64kb for the trampoline */
+ sub $0x1000,%eax
+diff --recursive -u ../xen-4.6.5-clean/xen/arch/x86/boot/mkelf32.c ./xen/arch/x86/boot/mkelf32.c
+--- ../xen-4.6.5-clean/xen/arch/x86/boot/mkelf32.c 2017-03-07 11:19:05.000000000 -0500
++++ ./xen/arch/x86/boot/mkelf32.c 2017-06-23 21:18:50.498798061 -0400
+@@ -231,14 +231,14 @@
+ u32 loadbase, dat_siz, mem_siz;
+ char *inimage, *outimage;
+ int infd, outfd;
+- char buffer[1024];
++ char buffer[1024] = {};
+ int bytes, todo, i;
+
+- Elf32_Ehdr in32_ehdr;
+- Elf32_Phdr in32_phdr;
++ Elf32_Ehdr in32_ehdr = {};
++ Elf32_Phdr in32_phdr = {};
+
+- Elf64_Ehdr in64_ehdr;
+- Elf64_Phdr in64_phdr;
++ Elf64_Ehdr in64_ehdr = {};
++ Elf64_Phdr in64_phdr = {};
+
+ if ( argc != 5 )
+ {
+diff --recursive -u ../xen-4.6.5-clean/xen/drivers/video/vga.c ./xen/drivers/video/vga.c
+--- ../xen-4.6.5-clean/xen/drivers/video/vga.c 2017-03-07 11:19:05.000000000 -0500
++++ ./xen/drivers/video/vga.c 2017-06-23 21:18:50.502798121 -0400
+@@ -5,177 +5,691 @@
+ */
+
+ #include <xen/config.h>
++#include <xen/compile.h>
+ #include <xen/init.h>
+ #include <xen/lib.h>
+ #include <xen/mm.h>
++#include <xen/errno.h>
++#include <xen/event.h>
++#include <xen/spinlock.h>
++#include <xen/console.h>
+ #include <xen/vga.h>
+-#include <xen/pci.h>
+ #include <asm/io.h>
++#include "font.h"
+
+ /* Filled in by arch boot code. */
+ struct xen_vga_console_info vga_console_info;
+
+-static int vgacon_keep;
+-static unsigned int xpos, ypos;
+-static unsigned char *video;
+
+-static void vga_text_puts(const char *s);
+-static void vga_noop_puts(const char *s) {}
+-void (*video_puts)(const char *) = vga_noop_puts;
+-
+-/*
+- * 'vga=<mode-specifier>[,keep]' where <mode-specifier> is one of:
+- *
+- * 'vga=ask':
+- * display a vga menu of available modes
+- *
+- * 'vga=current':
+- * use the current vga mode without modification
+- *
+- * 'vga=text-80x<rows>':
+- * text mode, where <rows> is one of {25,28,30,34,43,50,60}
+- *
+- * 'vga=gfx-<width>x<height>x<depth>':
+- * graphics mode, e.g., vga=gfx-1024x768x16
+- *
+- * 'vga=mode-<mode>:
+- * specifies a mode as specified in 'vga=ask' menu
+- * (NB. menu modes are displayed in hex, so mode numbers here must
+- * be prefixed with '0x' (e.g., 'vga=mode-0x0318'))
+- *
+- * The option 'keep' causes Xen to continue to print to the VGA console even
+- * after domain 0 starts to boot. The default behaviour is to relinquish
+- * control of the console to domain 0.
++/* Some of the code below is taken from SVGAlib. The original,
++ unmodified copyright notice for that code is below. */
++/* VGAlib version 1.2 - (c) 1993 Tommy Frandsen */
++/* */
++/* This library is free software; you can redistribute it and/or */
++/* modify it without any restrictions. This library is distributed */
++/* in the hope that it will be useful, but without any warranty. */
++
++/* Multi-chipset support Copyright 1993 Harm Hanemaayer */
++/* partially copyrighted (C) 1993 by Hartmut Schirmer */
++
++/* VGA data register ports */
++#define VGA_CRT_DC 0x3D5 /* CRT Controller Data Register - color emulation */
++#define VGA_CRT_DM 0x3B5 /* CRT Controller Data Register - mono emulation */
++#define VGA_ATT_R 0x3C1 /* Attribute Controller Data Read Register */
++#define VGA_ATT_W 0x3C0 /* Attribute Controller Data Write Register */
++#define VGA_GFX_D 0x3CF /* Graphics Controller Data Register */
++#define VGA_SEQ_D 0x3C5 /* Sequencer Data Register */
++#define VGA_MIS_R 0x3CC /* Misc Output Read Register */
++#define VGA_MIS_W 0x3C2 /* Misc Output Write Register */
++#define VGA_FTC_R 0x3CA /* Feature Control Read Register */
++#define VGA_IS1_RC 0x3DA /* Input Status Register 1 - color emulation */
++#define VGA_IS1_RM 0x3BA /* Input Status Register 1 - mono emulation */
++#define VGA_PEL_D 0x3C9 /* PEL Data Register */
++#define VGA_PEL_MSK 0x3C6 /* PEL mask register */
++
++/* EGA-specific registers */
++#define EGA_GFX_E0 0x3CC /* Graphics enable processor 0 */
++#define EGA_GFX_E1 0x3CA /* Graphics enable processor 1 */
++
++/* VGA index register ports */
++#define VGA_CRT_IC 0x3D4 /* CRT Controller Index - color emulation */
++#define VGA_CRT_IM 0x3B4 /* CRT Controller Index - mono emulation */
++#define VGA_ATT_IW 0x3C0 /* Attribute Controller Index & Data Write Register */
++#define VGA_GFX_I 0x3CE /* Graphics Controller Index */
++#define VGA_SEQ_I 0x3C4 /* Sequencer Index */
++#define VGA_PEL_IW 0x3C8 /* PEL Write Index */
++#define VGA_PEL_IR 0x3C7 /* PEL Read Index */
++
++/* standard VGA indexes max counts */
++#define VGA_CRT_C 0x19 /* Number of CRT Controller Registers */
++#define VGA_ATT_C 0x15 /* Number of Attribute Controller Registers */
++#define VGA_GFX_C 0x09 /* Number of Graphics Controller Registers */
++#define VGA_SEQ_C 0x05 /* Number of Sequencer Registers */
++#define VGA_MIS_C 0x01 /* Number of Misc Output Register */
++
++/* VGA misc register bit masks */
++#define VGA_MIS_COLOR 0x01
++#define VGA_MIS_ENB_MEM_ACCESS 0x02
++#define VGA_MIS_DCLK_28322_720 0x04
++#define VGA_MIS_ENB_PLL_LOAD (0x04 | 0x08)
++#define VGA_MIS_SEL_HIGH_PAGE 0x20
++
++/* VGA CRT controller register indices */
++#define VGA_CRTC_H_TOTAL 0
++#define VGA_CRTC_H_DISP 1
++#define VGA_CRTC_H_BLANK_START 2
++#define VGA_CRTC_H_BLANK_END 3
++#define VGA_CRTC_H_SYNC_START 4
++#define VGA_CRTC_H_SYNC_END 5
++#define VGA_CRTC_V_TOTAL 6
++#define VGA_CRTC_OVERFLOW 7
++#define VGA_CRTC_PRESET_ROW 8
++#define VGA_CRTC_MAX_SCAN 9
++#define VGA_CRTC_CURSOR_START 0x0A
++#define VGA_CRTC_CURSOR_END 0x0B
++#define VGA_CRTC_START_HI 0x0C
++#define VGA_CRTC_START_LO 0x0D
++#define VGA_CRTC_CURSOR_HI 0x0E
++#define VGA_CRTC_CURSOR_LO 0x0F
++#define VGA_CRTC_V_SYNC_START 0x10
++#define VGA_CRTC_V_SYNC_END 0x11
++#define VGA_CRTC_V_DISP_END 0x12
++#define VGA_CRTC_OFFSET 0x13
++#define VGA_CRTC_UNDERLINE 0x14
++#define VGA_CRTC_V_BLANK_START 0x15
++#define VGA_CRTC_V_BLANK_END 0x16
++#define VGA_CRTC_MODE 0x17
++#define VGA_CRTC_LINE_COMPARE 0x18
++#define VGA_CRTC_REGS VGA_CRT_C
++
++/* VGA CRT controller bit masks */
++#define VGA_CR11_LOCK_CR0_CR7 0x80 /* lock writes to CR0 - CR7 */
++#define VGA_CR17_H_V_SIGNALS_ENABLED 0x80
++
++/* VGA attribute controller register indices */
++#define VGA_ATC_PALETTE0 0x00
++#define VGA_ATC_PALETTE1 0x01
++#define VGA_ATC_PALETTE2 0x02
++#define VGA_ATC_PALETTE3 0x03
++#define VGA_ATC_PALETTE4 0x04
++#define VGA_ATC_PALETTE5 0x05
++#define VGA_ATC_PALETTE6 0x06
++#define VGA_ATC_PALETTE7 0x07
++#define VGA_ATC_PALETTE8 0x08
++#define VGA_ATC_PALETTE9 0x09
++#define VGA_ATC_PALETTEA 0x0A
++#define VGA_ATC_PALETTEB 0x0B
++#define VGA_ATC_PALETTEC 0x0C
++#define VGA_ATC_PALETTED 0x0D
++#define VGA_ATC_PALETTEE 0x0E
++#define VGA_ATC_PALETTEF 0x0F
++#define VGA_ATC_MODE 0x10
++#define VGA_ATC_OVERSCAN 0x11
++#define VGA_ATC_PLANE_ENABLE 0x12
++#define VGA_ATC_PEL 0x13
++#define VGA_ATC_COLOR_PAGE 0x14
++
++#define VGA_AR_ENABLE_DISPLAY 0x20
++
++/* VGA sequencer register indices */
++#define VGA_SEQ_RESET 0x00
++#define VGA_SEQ_CLOCK_MODE 0x01
++#define VGA_SEQ_PLANE_WRITE 0x02
++#define VGA_SEQ_CHARACTER_MAP 0x03
++#define VGA_SEQ_MEMORY_MODE 0x04
++
++/* VGA sequencer register bit masks */
++#define VGA_SR01_CHAR_CLK_8DOTS 0x01 /* bit 0: character clocks 8 dots wide are generated */
++#define VGA_SR01_SCREEN_OFF 0x20 /* bit 5: Screen is off */
++#define VGA_SR02_ALL_PLANES 0x0F /* bits 3-0: enable access to all planes */
++#define VGA_SR04_EXT_MEM 0x02 /* bit 1: allows complete mem access to 256K */
++#define VGA_SR04_SEQ_MODE 0x04 /* bit 2: directs system to use a sequential addressing mode */
++#define VGA_SR04_CHN_4M 0x08 /* bit 3: selects modulo 4 addressing for CPU access to display memory */
++
++/* VGA graphics controller register indices */
++#define VGA_GFX_SR_VALUE 0x00
++#define VGA_GFX_SR_ENABLE 0x01
++#define VGA_GFX_COMPARE_VALUE 0x02
++#define VGA_GFX_DATA_ROTATE 0x03
++#define VGA_GFX_PLANE_READ 0x04
++#define VGA_GFX_MODE 0x05
++#define VGA_GFX_MISC 0x06
++#define VGA_GFX_COMPARE_MASK 0x07
++#define VGA_GFX_BIT_MASK 0x08
++
++/* VGA graphics controller bit masks */
++#define VGA_GR06_GRAPHICS_MODE 0x01
++
++/* macro for composing an 8-bit VGA register index and value
++ * into a single 16-bit quantity */
++#define VGA_OUT16VAL(v, r) (((v) << 8) | (r))
++
++#define vgabase 0 /* use in/out port-access macros */
++#define VGA_OUTW_WRITE /* can use outw instead of 2xoutb */
++
++/*
++ * generic VGA port read/write
+ */
+-static char __initdata opt_vga[30] = "";
++
++static inline uint8_t vga_io_r(uint16_t port)
++{
++ return inb(port);
++}
++
++static inline void vga_io_w(uint16_t port, uint8_t val)
++{
++ outb(val, port);
++}
++
++static inline void vga_io_w_fast(uint16_t port, uint8_t reg, uint8_t val)
++{
++ outw(VGA_OUT16VAL(val, reg), port);
++}
++
++static inline uint8_t vga_mm_r(void __iomem *regbase, uint16_t port)
++{
++ return readb((char *)regbase + port);
++}
++
++static inline void vga_mm_w(void __iomem *regbase, uint16_t port, uint8_t val)
++{
++ writeb(val, (char *)regbase + port);
++}
++
++static inline void vga_mm_w_fast(void __iomem *regbase, uint16_t port, uint8_t reg, uint8_t val)
++{
++ writew(VGA_OUT16VAL(val, reg), (char *)regbase + port);
++}
++
++static inline uint8_t vga_r(void __iomem *regbase, uint16_t port)
++{
++ if (regbase)
++ return vga_mm_r(regbase, port);
++ else
++ return vga_io_r(port);
++}
++
++static inline void vga_w(void __iomem *regbase, uint16_t port, uint8_t val)
++{
++ if (regbase)
++ vga_mm_w(regbase, port, val);
++ else
++ vga_io_w(port, val);
++}
++
++
++static inline void vga_w_fast(void __iomem *regbase, uint16_t port, uint8_t reg, uint8_t val)
++{
++ if (regbase)
++ vga_mm_w_fast(regbase, port, reg, val);
++ else
++ vga_io_w_fast(port, reg, val);
++}
++
++
++/*
++ * VGA CRTC register read/write
++ */
++
++static inline uint8_t vga_rcrt(void __iomem *regbase, uint8_t reg)
++{
++ vga_w(regbase, VGA_CRT_IC, reg);
++ return vga_r(regbase, VGA_CRT_DC);
++}
++
++static inline void vga_wcrt(void __iomem *regbase, uint8_t reg, uint8_t val)
++{
++#ifdef VGA_OUTW_WRITE
++ vga_w_fast(regbase, VGA_CRT_IC, reg, val);
++#else
++ vga_w(regbase, VGA_CRT_IC, reg);
++ vga_w(regbase, VGA_CRT_DC, val);
++#endif /* VGA_OUTW_WRITE */
++}
++
++/*
++ * VGA sequencer register read/write
++ */
++
++static inline uint8_t vga_rseq(void __iomem *regbase, uint8_t reg)
++{
++ vga_w(regbase, VGA_SEQ_I, reg);
++ return vga_r(regbase, VGA_SEQ_D);
++}
++
++static inline void vga_wseq(void __iomem *regbase, uint8_t reg, uint8_t val)
++{
++#ifdef VGA_OUTW_WRITE
++ vga_w_fast(regbase, VGA_SEQ_I, reg, val);
++#else
++ vga_w(regbase, VGA_SEQ_I, reg);
++ vga_w(regbase, VGA_SEQ_D, val);
++#endif /* VGA_OUTW_WRITE */
++}
++
++/*
++ * VGA graphics controller register read/write
++ */
++
++static inline uint8_t vga_rgfx(void __iomem *regbase, uint8_t reg)
++{
++ vga_w(regbase, VGA_GFX_I, reg);
++ return vga_r(regbase, VGA_GFX_D);
++}
++
++static inline void vga_wgfx(void __iomem *regbase, uint8_t reg, uint8_t val)
++{
++#ifdef VGA_OUTW_WRITE
++ vga_w_fast(regbase, VGA_GFX_I, reg, val);
++#else
++ vga_w(regbase, VGA_GFX_I, reg);
++ vga_w(regbase, VGA_GFX_D, val);
++#endif /* VGA_OUTW_WRITE */
++}
++
++/*
++ * VGA attribute controller register read/write
++ */
++
++static inline uint8_t vga_rattr(void __iomem *regbase, uint8_t reg)
++{
++ vga_w(regbase, VGA_ATT_IW, reg);
++ return vga_r(regbase, VGA_ATT_R);
++}
++
++static inline void vga_wattr(void __iomem *regbase, uint8_t reg, uint8_t val)
++{
++ vga_w(regbase, VGA_ATT_IW, reg);
++ vga_w(regbase, VGA_ATT_W, val);
++}
++
++static int detect_video(void *video_base)
++{
++ volatile u16 *p = (volatile u16 *)video_base;
++ u16 saved1 = p[0], saved2 = p[1];
++ int video_found = 1;
++
++ p[0] = 0xAA55;
++ p[1] = 0x55AA;
++ if ( (p[0] != 0xAA55) || (p[1] != 0x55AA) )
++ video_found = 0;
++
++ p[0] = 0x55AA;
++ p[1] = 0xAA55;
++ if ( (p[0] != 0x55AA) || (p[1] != 0xAA55) )
++ video_found = 0;
++
++ p[0] = saved1;
++ p[1] = saved2;
++
++ return video_found;
++}
++
++/* This is actually code from vgaHWRestore in an old version of XFree86 :-) */
++void *setup_vga(void)
++{
++ /* The following VGA state was saved from a chip in text mode 3. */
++ static unsigned char regs[] = {
++ /* Sequencer registers */
++ 0x03, 0x00, 0x03, 0x00, 0x02,
++ /* CRTC registers */
++ 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, 0x00, 0x4f, 0x20,
++ 0x0e, 0x00, 0x00, 0x01, 0xe0, 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96,
++ 0xb9, 0xa3, 0xff,
++ /* Graphic registers */
++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, 0xff,
++ /* Attribute registers */
++ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, 0x38, 0x39, 0x3a,
++ 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x0c, 0x00, 0x0f, 0x08, 0x00
++ };
++
++ char *video;
++ int i, j;
++
++ if ( page_is_ram_type(paddr_to_pfn(0xB8000), RAM_TYPE_CONVENTIONAL) )
++ goto no_vga;
++
++ inb(VGA_IS1_RC);
++ outb(0x00, VGA_ATT_IW);
++
++ for ( i = j = 0; i < 5; i++ )
++ vga_wseq(vgabase, i, regs[j++]);
++
++ /* Ensure CRTC registers 0-7 are unlocked by clearing bit 7 of CRTC[17]. */
++ vga_wcrt(vgabase, 17, regs[5+17] & 0x7F);
++
++ for ( i = 0; i < 25; i++ )
++ vga_wcrt(vgabase, i, regs[j++]);
++
++ for ( i = 0; i < 9; i++ )
++ vga_wgfx(vgabase, i, regs[j++]);
++
++ inb(VGA_IS1_RC);
++ for ( i = 0; i < 21; i++ )
++ vga_wattr(vgabase, i, regs[j++]);
++
++ inb(VGA_IS1_RC);
++ outb(0x20, VGA_ATT_IW);
++
++ video = ioremap(0xB8000, 0x8000);
++
++ if ( !detect_video(video) )
++ {
++ iounmap(video);
++ goto no_vga;
++ }
++
++ return video;
++
++ no_vga:
++ printk("No VGA adaptor detected!\n");
++ return NULL;
++}
++
++static int vga_set_scanlines(unsigned scanlines)
++{
++ unsigned vtot, ovr, vss, vbs;
++ uint8_t vse, vbe, misc = 0;
++
++ switch (scanlines) {
++ case 43*8:
++ vtot = 0x1bf;
++ vss = 0x183;
++ vse = 0x05;
++ vbs = 0x163;
++ vbe = 0xba;
++ break;
++ case 25*16:
++ case 28*14:
++ vtot = 0x1bf;
++ vss = 0x19c;
++ vse = 0x0e;
++ vbs = 0x196;
++ vbe = 0xb9;
++ break;
++ case 30*16:
++ case 34*14:
++ vtot = 0x20b;
++ vss = 0x1ea;
++ vse = 0x0c;
++ vbs = 0x1e7;
++ vbe = 0x04;
++ /* Preserve clock select bits and color bit, set correct sync polarity. */
++ misc = (inb(VGA_MIS_R) & 0x0d) | 0xe2;
++ break;
++ default:
++ return -ENOSYS;
++ }
++
++ ovr = vga_rcrt(vgabase, VGA_CRTC_OVERFLOW);
++ if(vga_rcrt(vgabase, VGA_CRTC_V_DISP_END) + ((ovr & 0x02) << 7) + ((ovr & 0x40) << 3) == scanlines - 1)
++ return 0;
++
++ ovr = (ovr & 0x10)
++ | ((vtot >> 8) & 0x01)
++ | ((vtot >> 4) & 0x20)
++ | (((scanlines - 1) >> 7) & 0x02)
++ | (((scanlines - 1) >> 3) & 0x40)
++ | ((vss >> 6) & 0x04)
++ | ((vss >> 2) & 0x80)
++ | ((vbs >> 5) & 0x08);
++ vse |= vga_rcrt(vgabase, VGA_CRTC_V_SYNC_END) & 0x70;
++
++ vga_wcrt(vgabase, VGA_CRTC_V_SYNC_END, vse & 0x7f); /* Vertical sync end (also unlocks CR0-7) */
++ vga_wcrt(vgabase, VGA_CRTC_V_TOTAL, (uint8_t)vtot); /* Vertical total */
++ vga_wcrt(vgabase, VGA_CRTC_OVERFLOW, (uint8_t)ovr); /* Overflow */
++ vga_wcrt(vgabase, VGA_CRTC_V_SYNC_START, (uint8_t)vss); /* Vertical sync start */
++ vga_wcrt(vgabase, VGA_CRTC_V_SYNC_END, vse | 0x80); /* Vertical sync end (also locks CR0-7) */
++ vga_wcrt(vgabase, VGA_CRTC_V_DISP_END, (uint8_t)(scanlines - 1)); /* Vertical display end */
++ vga_wcrt(vgabase, VGA_CRTC_V_BLANK_START, (uint8_t)vbs); /* Vertical blank start */
++ vga_wcrt(vgabase, VGA_CRTC_V_BLANK_END, vbe); /* Vertical blank end */
++
++ if (misc)
++ outb(misc, VGA_MIS_W); /* Misc output register */
++
++ return 0;
++}
++
++#define FONT_COUNT_MAX 256
++#define FONT_HEIGHT_MAX 32
++#define CHAR_MAP_SIZE (FONT_COUNT_MAX * FONT_HEIGHT_MAX)
++
++/*
++ * We use font slot 0 because ATI cards do not honour changes to the
++ * character map select register. The fontslot parameter can be used to
++ * choose a non-default slot if the video card supports it and you wish to
++ * preserve the BIOS-initialised font data.
++ */
++static unsigned font_slot = 0;
++integer_param("fontslot", font_slot);
++
++static int vga_load_font(const struct font_desc *font, unsigned rows)
++{
++ unsigned fontheight = font ? font->height : 16;
++ uint8_t fsr = vga_rcrt(vgabase, VGA_CRTC_MAX_SCAN); /* Font size register */
++ int ret;
++
++ if (font_slot > 3 || (!font_slot && !font))
++ return -ENOSYS;
++
++ if (font
++ && (font->count > FONT_COUNT_MAX
++ || fontheight > FONT_HEIGHT_MAX
++ || font->width != 8))
++ return -EINVAL;
++
++ ret = vga_set_scanlines(rows * fontheight);
++ if (ret < 0)
++ return ret;
++
++ if ((fsr & 0x1f) == fontheight - 1)
++ return 0;
++
++ /* First, the Sequencer */
++ vga_wseq(vgabase, VGA_SEQ_RESET, 0x1);
++ /* CPU writes only to map 2 */
++ vga_wseq(vgabase, VGA_SEQ_PLANE_WRITE, 0x04);
++ /* Sequential addressing */
++ vga_wseq(vgabase, VGA_SEQ_MEMORY_MODE, 0x07);
++ /* Clear synchronous reset */
++ vga_wseq(vgabase, VGA_SEQ_RESET, 0x03);
++
++ /* Now, the graphics controller, select map 2 */
++ vga_wgfx(vgabase, VGA_GFX_PLANE_READ, 0x02);
++ /* disable odd-even addressing */
++ vga_wgfx(vgabase, VGA_GFX_MODE, 0x00);
++ /* map start at A000:0000 */
++ vga_wgfx(vgabase, VGA_GFX_MISC, 0x00);
++
++ if ( font )
++ {
++ unsigned i, j;
++ const uint8_t *data = font->data;
++ uint8_t *map;
++
++ map = ioremap(0xA0000 + font_slot*2*CHAR_MAP_SIZE, CHAR_MAP_SIZE);
++
++ for ( i = j = 0; i < CHAR_MAP_SIZE; )
++ {
++ writeb(j < font->count * fontheight ? data[j++] : 0, map + i++);
++ if ( !(j % fontheight) )
++ while ( i & (FONT_HEIGHT_MAX - 1) )
++ writeb(0, map + i++);
++ }
++
++ iounmap(map);
++ }
++
++ /* First, the sequencer, Synchronous reset */
++ vga_wseq(vgabase, VGA_SEQ_RESET, 0x01);
++ /* CPU writes to maps 0 and 1 */
++ vga_wseq(vgabase, VGA_SEQ_PLANE_WRITE, 0x03);
++ /* odd-even addressing */
++ vga_wseq(vgabase, VGA_SEQ_MEMORY_MODE, 0x03);
++ /* Character Map Select: The default font is kept in slot 0. */
++ vga_wseq(vgabase, VGA_SEQ_CHARACTER_MAP,
++ font ? font_slot | (font_slot << 2) : 0x00);
++ /* clear synchronous reset */
++ vga_wseq(vgabase, VGA_SEQ_RESET, 0x03);
++
++ /* Now, the graphics controller, select map 0 for CPU */
++ vga_wgfx(vgabase, VGA_GFX_PLANE_READ, 0x00);
++ /* enable even-odd addressing */
++ vga_wgfx(vgabase, VGA_GFX_MODE, 0x10);
++ /* map starts at b800:0 */
++ vga_wgfx(vgabase, VGA_GFX_MISC, 0x0e);
++
++ /* Font size register */
++ fsr = (fsr & 0xe0) + (fontheight - 1);
++ vga_wcrt(vgabase, VGA_CRTC_MAX_SCAN, fsr);
++
++ /* Cursor shape registers */
++ fsr = vga_rcrt(vgabase, VGA_CRTC_CURSOR_END) & 0xe0;
++ fsr |= fontheight - fontheight / 6;
++ vga_wcrt(vgabase, VGA_CRTC_CURSOR_END, fsr);
++ fsr = vga_rcrt(vgabase, VGA_CRTC_CURSOR_START) & 0xe0;
++ fsr |= (fsr & 0x1f) - 1;
++ vga_wcrt(vgabase, VGA_CRTC_CURSOR_START, fsr);
++
++ return 0;
++}
++
++
++/*
++ * HIGH-LEVEL INITIALISATION AND TEXT OUTPUT.
++ */
++
++static int vgacon_enabled = 0;
++static int vgacon_keep = 0;
++static int vgacon_lines = 50;
++static const struct font_desc *font;
++
++static int xpos, ypos;
++static unsigned char *video;
++
++/* vga: comma-separated options. */
++static char opt_vga[30] = "";
+ string_param("vga", opt_vga);
+
+ /* VGA text-mode definitions. */
+-static unsigned int columns, lines;
++#define COLUMNS 80
++#define LINES vgacon_lines
+ #define ATTRIBUTE 7
++#define VIDEO_SIZE (COLUMNS * LINES * 2)
+
+-#ifdef CONFIG_X86
+-void vesa_early_init(void);
+-void vesa_endboot(bool_t keep);
+-#else
+-#define vesa_early_init() ((void)0)
+-#define vesa_endboot(x) ((void)0)
+-#endif
+-
+-void __init video_init(void)
++void video_init(void)
+ {
+ char *p;
+
+- /* Look for 'keep' in comma-separated options. */
+ for ( p = opt_vga; p != NULL; p = strchr(p, ',') )
+ {
+ if ( *p == ',' )
+ p++;
+ if ( strncmp(p, "keep", 4) == 0 )
+ vgacon_keep = 1;
++ else if ( strncmp(p, "text-80x", 8) == 0 )
++ vgacon_lines = simple_strtoul(p + 8, NULL, 10);
+ }
+
+- switch ( vga_console_info.video_type )
++ video = setup_vga();
++ if ( !video )
++ return;
++
++ switch ( vgacon_lines )
+ {
+- case XEN_VGATYPE_TEXT_MODE_3:
+- if ( page_is_ram_type(paddr_to_pfn(0xB8000), RAM_TYPE_CONVENTIONAL) ||
+- ((video = ioremap(0xB8000, 0x8000)) == NULL) )
+- return;
+- outw(0x200a, 0x3d4); /* disable cursor */
+- columns = vga_console_info.u.text_mode_3.columns;
+- lines = vga_console_info.u.text_mode_3.rows;
+- memset(video, 0, columns * lines * 2);
+- video_puts = vga_text_puts;
+- break;
+- case XEN_VGATYPE_VESA_LFB:
+- case XEN_VGATYPE_EFI_LFB:
+- vesa_early_init();
++ case 25:
++ case 30:
++ font = &font_vga_8x16;
+ break;
+- default:
+- memset(&vga_console_info, 0, sizeof(vga_console_info));
++ case 28:
++ case 34:
++ font = &font_vga_8x14;
++ break;
++ case 43:
++ case 50:
++ case 60:
++ font = &font_vga_8x8;
+ break;
+ }
++
++ if ( (font == NULL) || (vga_load_font(font, vgacon_lines) < 0) )
++ {
++ vgacon_lines = 25;
++ font = NULL;
++ }
++
++ /* Clear the screen. */
++ memset(video, 0, VIDEO_SIZE);
++ xpos = ypos = 0;
++
++ /* Disable cursor. */
++ vga_wcrt(vgabase, VGA_CRTC_CURSOR_START, 0x20);
++
++ vgacon_enabled = 1;
+ }
+
+-void __init video_endboot(void)
++void video_endboot(void)
+ {
+- if ( video_puts == vga_noop_puts )
++ if ( !vgacon_enabled )
+ return;
+
++ if ( !vgacon_keep )
++ vgacon_enabled = 0;
++
+ printk("Xen is %s VGA console.\n",
+ vgacon_keep ? "keeping" : "relinquishing");
++}
+
+- if ( !vgacon_keep )
+- video_puts = vga_noop_puts;
+- else
+- {
+- int bus, devfn;
+
+- for ( bus = 0; bus < 256; ++bus )
+- for ( devfn = 0; devfn < 256; ++devfn )
+- {
+- const struct pci_dev *pdev;
+- u8 b = bus, df = devfn, sb;
++static void put_newline(void)
++{
++ xpos = 0;
++ ypos++;
+
+- spin_lock(&pcidevs_lock);
+- pdev = pci_get_pdev(0, bus, devfn);
+- spin_unlock(&pcidevs_lock);
+-
+- if ( !pdev ||
+- pci_conf_read16(0, bus, PCI_SLOT(devfn), PCI_FUNC(devfn),
+- PCI_CLASS_DEVICE) != 0x0300 ||
+- !(pci_conf_read16(0, bus, PCI_SLOT(devfn),
+- PCI_FUNC(devfn), PCI_COMMAND) &
+- (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) )
+- continue;
+-
+- while ( b )
+- {
+- switch ( find_upstream_bridge(0, &b, &df, &sb) )
+- {
+- case 0:
+- b = 0;
+- break;
+- case 1:
+- switch ( pci_conf_read8(0, b, PCI_SLOT(df),
+- PCI_FUNC(df),
+- PCI_HEADER_TYPE) )
+- {
+- case PCI_HEADER_TYPE_BRIDGE:
+- case PCI_HEADER_TYPE_CARDBUS:
+- if ( pci_conf_read16(0, b, PCI_SLOT(df),
+- PCI_FUNC(df),
+- PCI_BRIDGE_CONTROL) &
+- PCI_BRIDGE_CTL_VGA )
+- continue;
+- break;
+- }
+- break;
+- }
+- break;
+- }
+- if ( !b )
+- {
+- printk(XENLOG_INFO "Boot video device %02x:%02x.%u\n",
+- bus, PCI_SLOT(devfn), PCI_FUNC(devfn));
+- pci_hide_device(bus, devfn);
+- }
+- }
++ if ( ypos >= LINES )
++ {
++ ypos = LINES-1;
++ memmove((char*)video,
++ (char*)video + 2*COLUMNS, (LINES-1)*2*COLUMNS);
++ memset((char*)video + (LINES-1)*2*COLUMNS, 0, 2*COLUMNS);
+ }
++}
+
+- switch ( vga_console_info.video_type )
++void vga_putchar(int c)
++{
++ if ( !vgacon_enabled )
++ return;
++
++ if ( c == '\n' )
+ {
+- case XEN_VGATYPE_TEXT_MODE_3:
+- if ( !vgacon_keep )
+- memset(video, 0, columns * lines * 2);
+- break;
+- case XEN_VGATYPE_VESA_LFB:
+- case XEN_VGATYPE_EFI_LFB:
+- vesa_endboot(vgacon_keep);
+- break;
+- default:
+- BUG();
++ put_newline();
+ }
++ else
++ {
++ if ( xpos >= COLUMNS )
++ put_newline();
++ video[(xpos + ypos * COLUMNS) * 2] = c & 0xFF;
++ video[(xpos + ypos * COLUMNS) * 2 + 1] = ATTRIBUTE;
++ ++xpos;
++ }
++}
++
++
++int fill_console_start_info(struct dom0_vga_console_info *ci)
++{
++ memset(ci, 0, sizeof(*ci));
++
++ if ( !vgacon_enabled )
++ return 0;
++
++ ci->video_type = XEN_VGATYPE_TEXT_MODE_3;
++ ci->u.text_mode_3.rows = LINES;
++ ci->u.text_mode_3.columns = COLUMNS;
++ ci->u.text_mode_3.cursor_x = 0;
++ ci->u.text_mode_3.cursor_y = LINES - 1;
++ ci->u.text_mode_3.font_height = font ? font->height : 16;
++
++ return 1;
+ }
+
+ static void vga_text_puts(const char *s)
+@@ -184,28 +698,25 @@
+
+ while ( (c = *s++) != '\0' )
+ {
+- if ( (c == '\n') || (xpos >= columns) )
++ if ( (c == '\n') || (xpos >= COLUMNS) )
+ {
+- if ( ++ypos >= lines )
++ if ( ++ypos >= LINES )
+ {
+- ypos = lines - 1;
+- memmove(video, video + 2 * columns, ypos * 2 * columns);
+- memset(video + ypos * 2 * columns, 0, 2 * xpos);
++ ypos = LINES - 1;
++ memmove(video, video + 2 * COLUMNS, ypos * 2 * COLUMNS);
++ memset(video + ypos * 2 * COLUMNS, 0, 2 * xpos);
+ }
+ xpos = 0;
+ }
+
+ if ( c != '\n' )
+ {
+- video[(xpos + ypos * columns) * 2] = c;
+- video[(xpos + ypos * columns) * 2 + 1] = ATTRIBUTE;
++ video[(xpos + ypos * COLUMNS) * 2] = c;
++ video[(xpos + ypos * COLUMNS) * 2 + 1] = ATTRIBUTE;
+ xpos++;
+ }
+ }
+ }
+
+-int __init fill_console_start_info(struct dom0_vga_console_info *ci)
+-{
+- memcpy(ci, &vga_console_info, sizeof(*ci));
+- return 1;
+-}
++// hard code it to always go to vga
++void (*video_puts)(const char *) = vga_text_puts;
+diff --recursive -u ../xen-4.6.5-clean/xen/Makefile ./xen/Makefile
+--- ../xen-4.6.5-clean/xen/Makefile 2017-03-07 11:19:05.000000000 -0500
++++ ./xen/Makefile 2017-06-23 21:18:50.502798121 -0400
+@@ -6,11 +6,17 @@
+ export XEN_FULLVERSION = $(XEN_VERSION).$(XEN_SUBVERSION)$(XEN_EXTRAVERSION)
+ -include xen-version
+
+-export XEN_WHOAMI ?= $(USER)
+-export XEN_DOMAIN ?= $(shell ([ -x /bin/dnsdomainname ] && /bin/dnsdomainname) || ([ -x /bin/domainname ] && /bin/domainname || echo [unknown]))
+-export XEN_BUILD_DATE ?= $(shell LC_ALL=C date)
+-export XEN_BUILD_TIME ?= $(shell LC_ALL=C date +%T)
+-export XEN_BUILD_HOST ?= $(shell hostname)
++#export XEN_WHOAMI ?= $(USER)
++#export XEN_DOMAIN ?= $(shell ([ -x /bin/dnsdomainname ] && /bin/dnsdomainname) || ([ -x /bin/domainname ] && /bin/domainname || echo [unknown]))
++#export XEN_BUILD_DATE ?= $(shell LC_ALL=C date)
++#export XEN_BUILD_TIME ?= $(shell LC_ALL=C date +%T)
++#export XEN_BUILD_HOST ?= $(shell hostname)
++
++export XEN_WHOAMI ?= user
++export XEN_DOMAIN ?= domain
++export XEN_BUILD_DATE ?= 1970-01-01
++export XEN_BUILD_TIME ?= 00:00:00
++export XEN_BUILD_HOST ?= xen-buildhost
+
+ export BASEDIR := $(CURDIR)
+ export XEN_ROOT := $(BASEDIR)/..
+@@ -97,7 +103,7 @@
+ rm -f tags TAGS cscope.files cscope.in.out cscope.out cscope.po.out GTAGS GPATH GRTAGS GSYMS
+
+ $(TARGET).gz: $(TARGET)
+- gzip -f -9 < $< > $@.new
++ gzip -n -f -9 < $< > $@.new
+ mv $@.new $@
+
+ $(TARGET): delete-unfresh-files
diff --git ./series.conf ./series.conf
index ede01b2..109ddfb 100644
--- ./series.conf
+++ ./series.conf
@@ -98,3 +98,5 @@ patches.qubes/libxl-disable-forced-vkb-for-HVM.patch
patches.qubes/xenconsoled-enable-logging.patch
patches.qubes/vm-0001-hotplug-do-not-attempt-to-remove-containing-xenstore.patch
patches.qubes/xen-hotplug-qubesdb-update.patch
+
+patches.heads/heads.patch
Reference in New Issue Copy Permalink