heads/initrd/sbin/insmod

52 lines
1.3 KiB
Plaintext
Raw Normal View History

#!/bin/bash
# extend a TPM PCR with a module and then load it
# any arguments will also be measured.
# The default PCR to be extended is 5, but can be
# overridden with the MODULE_PCR environment variable
. /etc/functions
TRACE "Under insmod.sh"
MODULE="$1"; shift
if [ -z "$MODULE_PCR" ]; then
MODULE_PCR=5
fi
if [ -z "$MODULE" ]; then
die "Usage: $0 module [args...]"
fi
if [ ! -r "$MODULE" ]; then
die "$MODULE: not found?"
fi
if [ ! -r /sys/class/tpm/tpm0/pcrs -o ! -x /bin/tpm ]; then
Addition of qemu-(fb)whiptail-tpm2(-hotp) boards -coreboot support of TPM v2.0 (shared config for TPM2 support across all 4 previous variations) -swtpm set to be launched under TPM v2.0 mode under board config -Documentation file under each board.md softlinks to qemu-coreboot-fbwhiptail-tpm1.md (which has been generalized) This is skeleton for TPM v2 integration under Heads ------------- WiP TODO: - libcurl cannot be built as a tpm2-tools dependency as of now not sure why. curl currently needs to be added in board config to be built - Note: tpm-reset (master and here) needs some review, no handle of no tpm use case. Caller is responsible to not call it otherwise does nothing - init tries to bind fd and fails currently - Note: Check if whiptail is different of fbwhiptail in clearing screen. As of now every clear seems to be removed, still whiptail clears previous console output - When no OS' /boot can be mounted, do not try to TPM reset (will fail) - seal-hotpkey is not working properly - setting disk unlock key asks for TPM ownership passphrase (sealing in NV requires ownership, but text is misleading user as if reowning TPM) - We should cache input, feed tpm behind the scene and wipe passphrase and state clearly that this is TPM disk unlock kye passphrase. - primary key from TPM2 is invalid most of the time from kexec-select-boot and verifying global hashes but is setuped correctly at disk unlock key setup - would be nice to take advantage of bash function tracing to understand where we are for debugging purposes, code takes ash in consideration only - tpmr says it implements nv calls but actually doesn't. Removing those falsely wrapped functions would help. - Implementing them would be better - REVIEW TODOS IN CODE - READD CIRCLECI CONFIG Current state: - TPM unseal works without disk unlock key and generates TOTP properly (was missing die condition at unseal to not produce always good TOTP even if invalid) - TPM disk encryption key fails. Hypothesis is that sealing with USB drivers loaded and measures in inconsistent with sealed with/without. - TPM disk unsealing happens without USB modules being loaded in non-HOTP setup. This fails. - Current tests are with fbwhiptail (no clear called so having traces on command line of what happens) - Testing with HOTP implementation for sealing/unsealing since that forces USB module loads on each boot to remove this from failing possibilities
2022-08-25 18:43:31 +00:00
if [ ! -c /dev/tpmrm0 -o ! -x /bin/tpm2 ]; then
tpm_missing=1
fi
fi
if [ -z "$tpm_missing" ]; then
DEBUG "Extending TPM PCR $MODULE_PCR with $MODULE prior of usage"
Addition of qemu-(fb)whiptail-tpm2(-hotp) boards -coreboot support of TPM v2.0 (shared config for TPM2 support across all 4 previous variations) -swtpm set to be launched under TPM v2.0 mode under board config -Documentation file under each board.md softlinks to qemu-coreboot-fbwhiptail-tpm1.md (which has been generalized) This is skeleton for TPM v2 integration under Heads ------------- WiP TODO: - libcurl cannot be built as a tpm2-tools dependency as of now not sure why. curl currently needs to be added in board config to be built - Note: tpm-reset (master and here) needs some review, no handle of no tpm use case. Caller is responsible to not call it otherwise does nothing - init tries to bind fd and fails currently - Note: Check if whiptail is different of fbwhiptail in clearing screen. As of now every clear seems to be removed, still whiptail clears previous console output - When no OS' /boot can be mounted, do not try to TPM reset (will fail) - seal-hotpkey is not working properly - setting disk unlock key asks for TPM ownership passphrase (sealing in NV requires ownership, but text is misleading user as if reowning TPM) - We should cache input, feed tpm behind the scene and wipe passphrase and state clearly that this is TPM disk unlock kye passphrase. - primary key from TPM2 is invalid most of the time from kexec-select-boot and verifying global hashes but is setuped correctly at disk unlock key setup - would be nice to take advantage of bash function tracing to understand where we are for debugging purposes, code takes ash in consideration only - tpmr says it implements nv calls but actually doesn't. Removing those falsely wrapped functions would help. - Implementing them would be better - REVIEW TODOS IN CODE - READD CIRCLECI CONFIG Current state: - TPM unseal works without disk unlock key and generates TOTP properly (was missing die condition at unseal to not produce always good TOTP even if invalid) - TPM disk encryption key fails. Hypothesis is that sealing with USB drivers loaded and measures in inconsistent with sealed with/without. - TPM disk unsealing happens without USB modules being loaded in non-HOTP setup. This fails. - Current tests are with fbwhiptail (no clear called so having traces on command line of what happens) - Testing with HOTP implementation for sealing/unsealing since that forces USB module loads on each boot to remove this from failing possibilities
2022-08-25 18:43:31 +00:00
tpmr extend -ix "$MODULE_PCR" -if "$MODULE" \
|| die "$MODULE: tpm extend failed"
fi
if [ ! -z "$*" -a -z "$tpm_missing" ]; then
DEBUG "Extending TPM PCR $MODULE_PCR with $*"
TMPFILE=/tmp/insmod.$$
echo "$@" > $TMPFILE
DEBUG "Extending TPM PCR $MODULE_PCR with $MODULE prior of usage"
Addition of qemu-(fb)whiptail-tpm2(-hotp) boards -coreboot support of TPM v2.0 (shared config for TPM2 support across all 4 previous variations) -swtpm set to be launched under TPM v2.0 mode under board config -Documentation file under each board.md softlinks to qemu-coreboot-fbwhiptail-tpm1.md (which has been generalized) This is skeleton for TPM v2 integration under Heads ------------- WiP TODO: - libcurl cannot be built as a tpm2-tools dependency as of now not sure why. curl currently needs to be added in board config to be built - Note: tpm-reset (master and here) needs some review, no handle of no tpm use case. Caller is responsible to not call it otherwise does nothing - init tries to bind fd and fails currently - Note: Check if whiptail is different of fbwhiptail in clearing screen. As of now every clear seems to be removed, still whiptail clears previous console output - When no OS' /boot can be mounted, do not try to TPM reset (will fail) - seal-hotpkey is not working properly - setting disk unlock key asks for TPM ownership passphrase (sealing in NV requires ownership, but text is misleading user as if reowning TPM) - We should cache input, feed tpm behind the scene and wipe passphrase and state clearly that this is TPM disk unlock kye passphrase. - primary key from TPM2 is invalid most of the time from kexec-select-boot and verifying global hashes but is setuped correctly at disk unlock key setup - would be nice to take advantage of bash function tracing to understand where we are for debugging purposes, code takes ash in consideration only - tpmr says it implements nv calls but actually doesn't. Removing those falsely wrapped functions would help. - Implementing them would be better - REVIEW TODOS IN CODE - READD CIRCLECI CONFIG Current state: - TPM unseal works without disk unlock key and generates TOTP properly (was missing die condition at unseal to not produce always good TOTP even if invalid) - TPM disk encryption key fails. Hypothesis is that sealing with USB drivers loaded and measures in inconsistent with sealed with/without. - TPM disk unsealing happens without USB modules being loaded in non-HOTP setup. This fails. - Current tests are with fbwhiptail (no clear called so having traces on command line of what happens) - Testing with HOTP implementation for sealing/unsealing since that forces USB module loads on each boot to remove this from failing possibilities
2022-08-25 18:43:31 +00:00
tpmr extend -ix "$MODULE_PCR" -if $TMPFILE \
|| die "$MODULE: tpm extend on arguments failed"
fi
# Since we have replaced the real insmod, we must invoke
# the busybox insmod via the original executable
DEBUG "Loading $MODULE with busybox insmod"
busybox insmod "$MODULE" "$@" \
|| die "$MODULE: insmod failed"