genode/repos/dde_linux/run/usb_hid.run

#
# USB HID test
#
# By default, the run script runs interactively and reports any received USB
# input events to the console.
#
# When run with the '--autopilot' run option, the run script tests the USB
# input events generated by a 'Pro Micro' microcontroller.
#
# Pro Micro setup instructions
# ----------------------------
#
# Install prerequisites (example for Xubuntu 16.04):
#
# $ sudo apt-get install gcc-avr avr-libc avrdude
#
# Checkout and build the microcontroller software:
#
# $ git clone https://github.com/cproc/lufa.git
# $ cd lufa
# $ git checkout genode_usb_tests
# $ cd Demos/Device/ClassDriver/KeyboardMouseGenode
# $ make
#
# Connect the 'RST' pin with the 'GND' pin to hold the Pro Micro in the reset
# state.
#
# Connect the Pro Micro to the host PC
# 
# Check the device file name with 'dmesg'. If it is not 'ttyACM0', change
# 'AVRDUDE_PORT' in 'makefile' accordingly.
#
# Release the RST/GND pin connection and within the next 8 seconds run:
#
# $ make avrdude
#
# Disconnect the Pro Micro or put it into reset state again to avoid unexpected
# input events on the host PC.
#

if { [have_spec linux] } {
	puts "Run script does not support Linux."
	exit 0
}

if { [get_cmd_switch --autopilot] && [have_include "power_on/qemu"] } {
	puts "Run script does not support autopilot mode on Qemu"
	exit 0
}

if { [get_cmd_switch --autopilot] && ![have_spec x86] } {
	puts "Run script is only supported in autopilot mode on x86 platforms"
	exit 0
}

#
# Build
#

set build_components {
	core init
	drivers/timer
	drivers/usb
	test/input
}

lappend_if [have_spec gpio] build_components drivers/gpio

source ${genode_dir}/repos/base/run/platform_drv.inc
append_platform_drv_build_components

build $build_components

create_boot_directory

#
# Generate config
#

append config {
<config>
	<parent-provides>
		<service name="ROM"/>
		<service name="RAM"/>
		<service name="IRQ"/>
		<service name="IO_MEM"/>
		<service name="IO_PORT"/>
		<service name="PD"/>
		<service name="RM"/>
		<service name="CPU"/>
		<service name="LOG"/>
	</parent-provides>
	<default-route>
		<any-service> <parent/> <any-child/> </any-service>
	</default-route>}

append_if [have_spec gpio] config {
	<start name="gpio_drv">
		<resource name="RAM" quantum="4M"/>
		<provides><service name="Gpio"/></provides>
		<config/>
	</start>}

append_platform_drv_config

append config {
	<start name="timer">
		<resource name="RAM" quantum="1M"/>
		<provides><service name="Timer"/></provides>
	</start>
	<start name="usb_drv">
		<resource name="RAM" quantum="16M"/>
		<provides><service name="Input"/></provides>
		<config uhci="yes" ehci="yes" xhci="yes">
			<hid/>
		</config>
	</start>
	<start name="test-input">
		<resource name="RAM" quantum="1M"/>
	</start>
</config>}

install_config $config

#
# Boot modules
#

# generic modules
set boot_modules {
	core ld.lib.so init timer usb_drv test-input
}

lappend_if [have_spec gpio]             boot_modules gpio_drv

append_platform_drv_boot_modules

build_boot_image $boot_modules

append qemu_args " -m 256 -usb  -usbdevice mouse -usbdevice keyboard"
append qemu_args " -device usb-ehci,id=ehci"

if { [have_include "power_on/qemu"] || ![get_cmd_switch --autopilot] } { run_genode_until forever }

# autopilot test

run_genode_until {\[init -\> test-input\] Input event #1\t} 60

# remove everything before the first interesting line
regexp {(\[init -\> test-input\] Input event #1\t.*)} $output all output

run_genode_until {\[init -\> test-input\] Input event #12.*\n} 40 [output_spawn_id]

unify_output { number [0-9]+} ""
unify_output {(?n)on usb-dummy.*$} ""
unify_output {(?n)using .*$} ""
unify_output {(?n)^.*__wait_event.*$} ""
unify_output {(?n)^.*Failed to submit URB.*$} ""
unify_output {(?n)^.*dev_warn.*$} ""
filter_out_color_escape_sequences
trim_lines

compare_output_to {
[init -> test-input] Input event #1	type=PRESS  	code=45	rx=0	ry=0	ax=0	ay=0	key_cnt=1	KEY_X
[init -> test-input] Input event #2	type=RELEASE	code=45	rx=0	ry=0	ax=0	ay=0	key_cnt=-1	KEY_X
[init -> test-input] Input event #3	type=PRESS  	code=272	rx=0	ry=0	ax=0	ay=0	key_cnt=1	BTN_LEFT
[init -> test-input] Input event #4	type=MOTION 	code=0	rx=-1	ry=0	ax=0	ay=0	key_cnt=1	
[init -> test-input] Input event #5	type=MOTION 	code=0	rx=0	ry=1	ax=0	ay=0	key_cnt=1	
[init -> test-input] Input event #6	type=RELEASE	code=272	rx=0	ry=0	ax=0	ay=0	key_cnt=-1	BTN_LEFT
[init -> usb_drv] dev_info: USB disconnect, device
[init -> usb_drv] dev_info: new full-speed USB device
[init -> usb_drv] dev_info: D L
[init -> usb_drv] dev_info: input: USB HID v1.11 Keyboard [D L]
[init -> usb_drv] dev_info: D L
[init -> usb_drv] dev_info: input: USB HID v1.11 Mouse [D L]
[init -> test-input] Input event #7	type=PRESS  	code=45	rx=0	ry=0	ax=0	ay=0	key_cnt=1	KEY_X
[init -> test-input] Input event #8	type=RELEASE	code=45	rx=0	ry=0	ax=0	ay=0	key_cnt=-1	KEY_X
[init -> test-input] Input event #9	type=PRESS  	code=272	rx=0	ry=0	ax=0	ay=0	key_cnt=1	BTN_LEFT
[init -> test-input] Input event #10	type=MOTION 	code=0	rx=-1	ry=0	ax=0	ay=0	key_cnt=1	
[init -> test-input] Input event #11	type=MOTION 	code=0	rx=0	ry=1	ax=0	ay=0	key_cnt=1	
[init -> test-input] Input event #12	type=RELEASE	code=272	rx=0	ry=0	ax=0	ay=0	key_cnt=-1	BTN_LEFT
}