mirror of
https://github.com/genodelabs/genode.git
synced 2024-12-24 15:56:41 +00:00
606 lines
22 KiB
Plaintext
606 lines
22 KiB
Plaintext
|
|
|
|
==========================
|
|
Genode components overview
|
|
==========================
|
|
|
|
Norman Feske
|
|
|
|
|
|
Abstract
|
|
########
|
|
|
|
Genode comes with a growing number of components apparently scattered across
|
|
various repositories. This document provides an overview of these components
|
|
and outlines the systematics behind them.
|
|
|
|
|
|
Categorization of components
|
|
############################
|
|
|
|
Genode components usually fall into one of four categories, namely device
|
|
drivers, resource multiplexers, protocol stacks, and applications. Each
|
|
of them is briefly characterized as follows:
|
|
|
|
:Device drivers: translate hardware resources into device-independent
|
|
session interfaces. Naturally, a device driver is specific to a
|
|
particular hardware platform. The hardware resources are accessed
|
|
via core's IO_MEM, IO_PORT, and IRQ services. The functionality of
|
|
the driver is made available to other system components by announcing
|
|
one of Genode's device-independent session interfaces, which are
|
|
'platform_session', 'framebuffer_session', 'input_session', 'block_session',
|
|
'audio_out_session', 'log_session', 'nic_session', and 'timer_session'
|
|
(see 'os/include/' for the interface definitions). Those interfaces are
|
|
uniform across hardware platforms and kernel base platforms. Usually,
|
|
each device driver can accommodate only one client at a time.
|
|
|
|
:Resource multiplexers: provide mechanisms to multiplex device resources
|
|
to multiple clients. A typical resource multiplexer requests one
|
|
of Genode's device-independent session interface (usually connected
|
|
to a device driver) and, in turn, announces a service of the same kind.
|
|
However, in contrast to a device driver, a resource multiplexer is able
|
|
to serve more than one client at the same time.
|
|
|
|
:Protocol stacks: translate low-level interfaces to higher-level
|
|
interfaces (or sometimes vice versa). Typically, a protocol stack comes
|
|
in the form of a library, which uses a device-independent session
|
|
interface as back end and provides a high-level library interface as
|
|
front end. However, protocol stacks also exist in the form of
|
|
distinct components that implement translations between different
|
|
session interfaces.
|
|
|
|
:Applications: implement functionality using APIs as provided by
|
|
protocol stacks.
|
|
|
|
:Runtime environments: enable existing 3rd-party software to be executed
|
|
as a Genode sub systems.
|
|
|
|
|
|
Device drivers
|
|
##############
|
|
|
|
Device drivers usually reside in the 'src/drivers' subdirectory of source-code
|
|
repositories. The most predominant repositories hosting device drivers are
|
|
'os', 'dde_ipxe', 'dde_linux'.
|
|
|
|
|
|
Platform devices
|
|
================
|
|
|
|
:'os/src/drivers/platform/': Platform drivers for various platforms.
|
|
On x86, the platform driver uses the PCI controller as found on x86 PC
|
|
hardware. A client can probe for a particular device and request information
|
|
about physical device resources (using the 'platform_device' interface). I/O
|
|
resources for MMIO regions, I/O ports, and interrupts can be requested by the
|
|
provided device abstraction.
|
|
|
|
:'os/src/drivers/acpi':
|
|
On x86 platforms that use the APIC (namely Fiasco.OC, NOVA, and hw_x86_64)
|
|
this simple ACPI parser traverses the ACPI tables and reports device-resource
|
|
information (e.g., interrupt lines of PCI devices).
|
|
|
|
:'libports/src/app/acpica':
|
|
In addition to our ACPI base driver, the acpica component uses the
|
|
ACPICA library to provide access to dynamic functions like battery
|
|
states, events (e.g., notebook lid close and power buttons), as well
|
|
as reset and power off. The componenten reports ACPI events and
|
|
states as reports and itself responds to system state changes of
|
|
certain configuration ROMs.
|
|
|
|
|
|
UART devices
|
|
============
|
|
|
|
The UART device drivers implement the UART-session interface.
|
|
|
|
:'os/src/drivers/uart/spec/pl011':
|
|
Driver for the PL011 UART as found on many ARM-based platforms.
|
|
|
|
:'os/src/drivers/uart/spec/i8250':
|
|
Driver for the i8250 UART as found on PC hardware.
|
|
|
|
:'os/src/drivers/uart/spec/omap4':
|
|
Driver for the UART as found on OMAP4-based hardware.
|
|
|
|
:'os/src/drivers/uart/spec/exynos5':
|
|
Driver for the UART as found on Exynos-5-based hardware.
|
|
|
|
|
|
Framebuffer and input drivers
|
|
=============================
|
|
|
|
Framebuffer and input drivers implement the framebuffer-session interface and
|
|
input-session interfaces respectively.
|
|
|
|
:'os/src/drivers/input/dummy':
|
|
Pseudo input driver without accessing any hardware. This component is useful
|
|
to resolve a dependency from an input session for scenarios where no user
|
|
input is required.
|
|
|
|
:'os/src/drivers/input/spec/ps2/x86':
|
|
Driver for the 'i8042' PS/2 controller as found in x86 PCs. It supports both
|
|
mouse (including ImPS/2, ExPS/2) and keyboard.
|
|
|
|
:'os/src/drivers/input/spec/ps2/pl050':
|
|
Driver for the PL050 PS/2 controller as found on ARM platforms such as
|
|
VersatilePB. The physical base address used by the driver is obtained at
|
|
compile time from a header file called 'pl050_defs.h'. The version of the
|
|
VersatilePB platform can be found at 'os/include/platform/vpb926/' and
|
|
is made available to the driver via the SPECS machinery of the Genode build
|
|
system.
|
|
|
|
:'os/src/drivers/input/spec/imx53':
|
|
Input driver for Egalaxy touchscreen and Freescale's MPR121
|
|
capacitative touch buttons on i.MX53.
|
|
|
|
:'libports/src/drivers/framebuffer/vesa':
|
|
Driver using VESA mode setting on x86 PCs. For more information, please refer
|
|
to the README file in the driver directory.
|
|
|
|
:'os/src/drivers/framebuffer/spec/pl11x':
|
|
Driver for the PL110/PL111 LCD display.
|
|
|
|
:'os/src/drivers/framebuffer/spec/omap4':
|
|
Driver for HDMI output on OMAP4 SoCs.
|
|
|
|
:'os/src/drivers/framebuffer/spec/exynos5':
|
|
Driver for HDMI output on Exynos-5 SoCs.
|
|
|
|
:'os/src/drivers/framebuffer/spec/imx53':
|
|
Driver for LCD output on i.MX53 SoCs.
|
|
|
|
:'os/src/drivers/framebuffer/spec/rpi':
|
|
Driver for the HDMI output of the Raspberry Pi.
|
|
|
|
:'os/src/drivers/framebuffer/spec/sdl':
|
|
Serves as both framebuffer and input driver on Linux using libSDL. This
|
|
driver is only usable on the Linux base platform.
|
|
|
|
:'dde_linux/src/drivers/framebuffer/intel':
|
|
Framebuffer driver for Intel i915 compatible graphic cards based on
|
|
the Linux Intel KMS driver.
|
|
|
|
:'dde_linux/src/drivers/usb':
|
|
USB driver that makes USB HID and USB storage devices available as input
|
|
sessions and block session respectively. For examples of using this driver,
|
|
refer to the run scripts at 'dde_linux/run/usb_hid' and
|
|
'dde_linux/run/usb_storage'.
|
|
|
|
|
|
Timer drivers
|
|
=============
|
|
|
|
The timer driver located at 'os/src/drivers/timer' implements the timer-session
|
|
interface. Technically, it is both a device driver (accessing a timer
|
|
device) and a resource multiplexer (supporting multiple timer-session clients
|
|
at the same time). Depending on the base platform, the implementation uses
|
|
different time sources. Time sources are either hardware timers, a time source
|
|
provided by the kernel, or a pseudo time source (busy):
|
|
|
|
:'nova': NOVA kernel semaphores
|
|
:'okl4_x86': Programmable Interval Timer (PIT) device
|
|
:'foc': IPC timeout
|
|
:'fiasco': IPC timeout
|
|
:'pistachio': IPC timeout
|
|
:'linux': nanosleep()
|
|
:'hw': kernel timer
|
|
|
|
|
|
Audio drivers
|
|
=============
|
|
|
|
Audio drivers implement the Audio_out session interface defined at
|
|
'os/include/audio_out_session/' for playback and optionally the audio_in
|
|
interface for recording.
|
|
|
|
:'os/src/drivers/audio/spec/linux':
|
|
Uses ALSA as back-end on the Linux base platform and supports only playback.
|
|
|
|
:'dde_bsd/src/drivers/audio':
|
|
Sound drivers ported from OpenBSD. Currently, the repository
|
|
includes support for Intel HD Audio as well as for Ensoniq AudioPCI
|
|
(ES1370) compatible sound cards.
|
|
|
|
|
|
Block drivers
|
|
=============
|
|
|
|
All block drivers implement the block-session interface defined at
|
|
'os/include/block_session/'.
|
|
|
|
:'os/src/drivers/sd_card/spec/pl180':
|
|
Driver for SD-cards connected via the PL180 device as found on the PBX-A9
|
|
platform.
|
|
|
|
:'os/src/drivers/sd_card/spec/omap4':
|
|
Driver for SD-cards connected to the SD-card controller of the OMAP4 SoC.
|
|
|
|
:'os/src/drivers/sd_card/spec/exynos5':
|
|
Driver for SD-cards and eMMC connected to Exynos-5-based platforms.
|
|
|
|
:'os/src/drivers/sd_card/spec/imx53':
|
|
Driver for SD-cards connected to the Freescale i.MX53 platform like the
|
|
Quick Start Board or the USB armory device.
|
|
|
|
:'os/src/drivers/sd_card/spec/rpi':
|
|
Driver for SD-cards connected to the Raspberry Pi.
|
|
|
|
:'dde_linux/src/drivers/usb':
|
|
USB driver that makes USB storage devices available as block sessions.
|
|
For an example of using this driver, refer to the run script at
|
|
'dde_linux/run/usb_storage'.
|
|
|
|
:'os/src/drivers/ahci':
|
|
Driver for SATA disks and CD-ROMs on x86 PCs.
|
|
|
|
:'os/src/drivers/usb_block':
|
|
USB Mass Storage Bulk-Only driver using the USB session interface.
|
|
|
|
|
|
Network interface drivers
|
|
=========================
|
|
|
|
All network interface drivers implement the NIC session interface
|
|
defined at 'os/include/nic_session'.
|
|
|
|
:'os/src/drivers/nic/spec/linux':
|
|
Driver that uses a Linux tap device as back end. It is only useful on the
|
|
Linux base platform.
|
|
|
|
:'os/src/drivers/nic/spec/lan9118':
|
|
Native device driver for the LAN9118 network adaptor as featured on the
|
|
PBX-A9 platform.
|
|
|
|
:'os/src/drivers/nic/gem':
|
|
Device driver for Cadence EMAC PS network adaptor as featured on the
|
|
Xilinx Zynq.
|
|
|
|
:'dde_ipxe/src/drivers/nic':
|
|
Device drivers ported from the iPXE project. Supported devices are Intel
|
|
E1000 and pcnet32.
|
|
|
|
:'dde_linux/src/drivers/wifi':
|
|
The wifi_drv component is a port of the Linux mac802.11 stack, including the
|
|
iwlwifi driver. It enables the use of Intel Wireless 6xxx and 7xxx cards.
|
|
|
|
:'dde_linux/src/drivers/usb':
|
|
For the OMAP4 platform, the USB driver contains the networking driver.
|
|
|
|
|
|
General-purpose I/O drivers
|
|
===========================
|
|
|
|
:'os/src/drivers/gpio/spec/omap4':
|
|
Driver for accessing the GPIO pins of OMAP4 platforms.
|
|
|
|
:'os/src/drivers/gpio/spec/imx53':
|
|
Driver for accessing the GPIO pins of i.MX53 platforms.
|
|
|
|
:'os/src/drivers/gpio/spec/rpi':
|
|
Driver for accessing the GPIO pins of Raspberry Pi platforms.
|
|
|
|
:'os/src/drivers/gpio/spec/exynos5':
|
|
Driver for accessing the GPIO pins of Exynos4 platforms, e.g.,
|
|
Odroid-X2.
|
|
|
|
|
|
Resource multiplexers
|
|
#####################
|
|
|
|
By convention, resource multiplexers are located at the 'src/server'
|
|
subdirectory of a source repository.
|
|
|
|
:Framebuffer and input: The framebuffer and input session interfaces can be
|
|
multiplexed using the Nitpicker GUI server, which allows multiple clients to
|
|
create and manage rectangular areas on screen. Nitpicker uses one input
|
|
session and one framebuffer session as back end and, in turn, provides
|
|
so-called nitpicker sessions to one or multiple clients. Each nitpicker
|
|
session contains a virtual framebuffer and a virtual input session. Nitpicker
|
|
(including a README file) is located at 'os/src/server/nitpicker'.
|
|
|
|
:Audio output: The audio mixer located at 'os/src/server/mixer' enables
|
|
multiple clients to use the audio-out interface. The mixing is done by simply
|
|
adding and clamping the signals of all present clients.
|
|
|
|
:Networking: The NIC bridge located at 'os/src/server/nic_bridge' multiplexes
|
|
one NIC session to multiple virtual NIC sessions using a proxy-ARP
|
|
implementation. Each client has to obtain a dedicated IP address visible to
|
|
the physical network. DHCP requests originating from the virtual NIC sessions
|
|
are delegated to the physical network.
|
|
|
|
:Block: The block-device partition server at 'os/src/server/part_blk' reads
|
|
the partition table of a block session and exports each partition found as
|
|
separate block session. For using this server, please refer to the run
|
|
script at 'os/run/part_blk'.
|
|
|
|
:File system: The FFAT file-system service allows multiple clients to
|
|
concurrently access the same FFAT-formatted block device. It is located
|
|
at 'libports/src/server/ffat_fs'.
|
|
|
|
:Terminal: The terminal_mux service located at gems/src/server/terminal_mux
|
|
is able to provide multiple terminal sessions over one terminal-client
|
|
session. The user can switch between the different sessions using a keyboard
|
|
shortcut, which brings up an ncurses-based menu.
|
|
|
|
|
|
Protocol stacks
|
|
###############
|
|
|
|
Protocol stacks come either in the form of separate components that translate
|
|
one session interface to another, or in the form of libraries.
|
|
|
|
Separate components:
|
|
|
|
:'os/src/server/nit_fb':
|
|
Translates a nitpicker session to a pair of framebuffer and input sessions.
|
|
Each 'nit_fb' instance is visible as a rectangular area on screen presenting
|
|
a virtual frame buffer. The area is statically positioned. For more
|
|
information, please refer to 'os/src/server/nit_fb/README'.
|
|
|
|
:'gems/src/server/wm':
|
|
Window manager that implements the nitpicker session interface but manages
|
|
each client view as a separate window. The window decorations are provided
|
|
by a so-called decorator (e.g., 'gems/src/app/decorator'). The behaviour
|
|
is defined by a so-called window layouter such as the floating window
|
|
layouter located at 'gems/src/app/floating_window_layouter/'.
|
|
|
|
:'demo/src/server/liquid_framebuffer':
|
|
Implements the same translation as 'nit_fb' but by presenting an interactive
|
|
window rather than a statically positioned screen area.
|
|
|
|
:'os/src/server/tar_rom':
|
|
Provides each file contained in a tar file obtained via Genode's ROM session
|
|
as separate ROM session.
|
|
|
|
:'os/src/server/iso9660':
|
|
Provides each file of an ISO9660 file system accessed via a block session as
|
|
separate ROM session.
|
|
|
|
:'os/src/server/ram_fs':
|
|
A file-system implementation that keeps all data in memory.
|
|
|
|
:'dde_rump/src/server/rump_fs':
|
|
A file-system server that contains various file-systems ported from the
|
|
NetBSD kernel.
|
|
|
|
:'os/src/server/lx_fs':
|
|
A file system server that makes the file system of a Linux base platform
|
|
available to Genode.
|
|
|
|
:'os/src/server/trace_fs':
|
|
A pseudo file system that can be used as a front end to core's TRACE
|
|
service.
|
|
|
|
:'os/src/server/rom_blk':
|
|
Provides the content of a ROM file as a block session, similar to the
|
|
loop-mount mechanism on Linux
|
|
|
|
:'os/src/server/ram_blk':
|
|
Provides the content of a RAM dataspace as a block session. In contrast
|
|
to 'rom_blk', this server provides a writeable block device.
|
|
|
|
:'os/src/server/terminal_log':
|
|
Adapter for forwarding LOG messages to a terminal session.
|
|
|
|
:'os/src/server/log_terminal':
|
|
Adapter for forwarding terminal output to a LOG session.
|
|
|
|
:'os/src/server/fs_log':
|
|
Adapter that writes LOG messages to files on a file system.
|
|
|
|
:'demo/src/server/nitlog':
|
|
Provides a LOG session, printing log output on screen via a nitpicker
|
|
session.
|
|
|
|
:'os/src/app/rom_logger':
|
|
The rom_logger component requests a ROM session and writes the
|
|
content of the ROM dataspace to the LOG.
|
|
|
|
:'os/src/server/rom_filter':
|
|
The ROM filter provides a ROM module that depends on the content of
|
|
other ROM modules steered by the filter configuration, e.g., dynamic
|
|
switching between configuration variants dependent on the state of
|
|
the system.
|
|
|
|
:'os/src/server/vfs':
|
|
A file-system server using the VFS library and plugins as backend.
|
|
|
|
:'os/src/server/log_terminal':
|
|
Forwards terminal output to a LOG session.
|
|
|
|
:'gems/src/server/file_terminal':
|
|
Provides terminal sessions that target files on a file system.
|
|
|
|
:'gems/src/server/terminal':
|
|
Provides a terminal session via a graphical terminal using a framebuffer
|
|
session and an input session.
|
|
|
|
:'gems/src/server/tcp_terminal':
|
|
Provides one or multiple terminal sessions over TCP connections.
|
|
For further information, refer to 'gems/src/server/tcp_terminal/README'.
|
|
|
|
:'os/src/server/terminal_crosslink':
|
|
The terminal crosslink service allows to terminal clients to talk to each
|
|
other.
|
|
|
|
:'gems/src/server/http_blk':
|
|
A block service that fetches a virtual block device over the network from
|
|
a HTTP server.
|
|
|
|
:'os/src/server/fs_rom':
|
|
A ROM service that translates the 'File_system' session interface to the
|
|
'ROM' session' interface. Each request for a ROM file is handled by looking
|
|
up an equally named file on the file system.
|
|
Please refer to 'os/src/server/fs_rom' for more information.
|
|
|
|
:'os/src/server/dynamic_rom':
|
|
A simple ROM service that provides ROM modules that change in time according
|
|
to a configured timeline.
|
|
|
|
:'os/src/server/report_rom':
|
|
A service that implements both the report session interface and the ROM
|
|
session interface. It reflects incoming reports as ROM modules.
|
|
|
|
:'os/src/server/clipboard':
|
|
This component is both a report service and a ROM service. The
|
|
clients of the report service can issue new clipboard content, which
|
|
is then propagated to the clients of the ROM service according to a
|
|
configurable information-flow policy.
|
|
|
|
:'ports/src/app/openvpn':
|
|
OpenVPN enables access to remote network resources through a secure tunnel
|
|
by providing an encrypted connection to a remote host. It is plugged between
|
|
NIC server (such as a network driver) and NIC client.
|
|
|
|
:'os/src/server/input_merger':
|
|
A component that merges input events from multiple sources into a single
|
|
stream.
|
|
|
|
:'libports/src/server/acpi_input':
|
|
A component that transforms ACPI events into Genode input events.
|
|
|
|
:'gems/src/server/nit_fader':
|
|
A wrapper for nitpicker's session interface that applies alpha-blending to
|
|
the of views a nitpicker client.
|
|
|
|
Libraries:
|
|
|
|
:'libports/lib/mk/libc':
|
|
C runtime ported from FreeBSD.
|
|
|
|
:'libports/lib/mk/libc_lwip_nic_dhcp':
|
|
Translates the BSD socket API to a NIC session using the lwIP stack.
|
|
|
|
:'dde_linux/lib/mk/libc_lxip':
|
|
Translates the BSD socket API to a NIC session using the Linux TCP/IP stack.
|
|
|
|
:'libports/lib/mk/libc_ffat':
|
|
Accesses files on a block device that contains a FAT32 file system.
|
|
|
|
:'libports/lib/mk/libc_fuse_exfat':
|
|
Accesses files on a block device that contains an exFAT file system.
|
|
|
|
:'libports/lib/mk/libc_fuse_ext2':
|
|
Accesses files on a block device that contains an ext2 file system.
|
|
|
|
:'libports/lib/mk/libc_terminal':
|
|
Connects the standard input and output from/to Genode's terminal session
|
|
interface.
|
|
|
|
:'libports/lib/mk/stdcxx':
|
|
Standard C++ library
|
|
|
|
:'libports/lib/mk/gallium':
|
|
Translates the OpenGL API to a framebuffer session using the MESA OpenGL
|
|
stack
|
|
|
|
:'libports/lib/mk/pthread':
|
|
Subset of the POSIX thread and semaphore API.
|
|
|
|
:'libports/lib/mk/python':
|
|
Runtime of the Python scripting language.
|
|
|
|
:'libports/lib/mk/mupdf':
|
|
PDF rendering engine.
|
|
|
|
:'libports/lib/mk/sdl':
|
|
Translates the libSDL API to framebuffer and input sessions.
|
|
|
|
:'libports/lib/mk/ncurses':
|
|
Library for implementing pseudo-graphical applications (i.e., VIM) that
|
|
run on a text terminal.
|
|
|
|
:'libports/lib/mk/avcodec':
|
|
A library for video decoding, conversion, and streaming.
|
|
|
|
:'libports/lib/mk/lua':
|
|
Runtime for the Lua scripting language.
|
|
|
|
:'libports/lib/mk/qt5_*':
|
|
Qt5 framework, using nitpicker session and NIC session as back end.
|
|
|
|
:'libports/lib/mk/vfs_jitterentropy.mk':
|
|
A VFS plugin that makes a jitter-based random-number generator available
|
|
as a file within the process-local VFS.
|
|
|
|
|
|
Applications
|
|
############
|
|
|
|
Applications are Genode components that use other component's services but
|
|
usually do not provide services. They are typically located in the 'src/app/'
|
|
subdirectory of a repository. Most applications come with README files
|
|
located in their respective directory.
|
|
|
|
:'gems/src/app/backdrop':
|
|
Nitpicker client application that sets a composition of PNG images as
|
|
desktop background.
|
|
|
|
:'demo/src/app/launchpad':
|
|
Graphical application for interactively starting and killing subsystems.
|
|
|
|
:'gems/app/launcher': Graphical launcher of Genode subsystems.
|
|
|
|
:'os/app/cli_monitor': Command-line-based launcher of Genode subsystems.
|
|
|
|
:'demo/src/app/scout':
|
|
Graphical hypertext browser used for Genode's default demonstration scenario.
|
|
|
|
:'libports/src/app/eglgears':
|
|
Example program for using OpenGL via the Gallium3D graphics stack.
|
|
|
|
:'ports/src/app/arora':
|
|
Arora is a Qt-based web browser using the Webkit engine.
|
|
|
|
:'ports/src/app/gdb_monitor':
|
|
Application that allows the debugging of a process via GDB over a remote
|
|
connection.
|
|
|
|
:'libports/src/app/qt5/qt_launchpad':
|
|
Graphical application starter implemented using Qt.
|
|
|
|
:'libports/src/app/qt5/examples/':
|
|
Several example applications that come with Qt.
|
|
|
|
:'os/src/app/xvfb':
|
|
Is a proxy application that enables the integration of a virtual X server
|
|
into a Nitpicker session on the Linux base platform.
|
|
|
|
:'ports/src/noux-pkg':
|
|
Ports of popular commandline-based Unix software such as VIM, bash,
|
|
coreutils, binutils, gcc, findutils, and netcat. The programs are supposed
|
|
to be executed within the Noux runtime environment.
|
|
|
|
:'ports/src/app/lighttpd':
|
|
Lighttpd is a fast and feature-rich web server. The port of lighttpd uses
|
|
a file-system session to access the website content and the web-server
|
|
configuration.
|
|
|
|
|
|
Runtime environments
|
|
####################
|
|
|
|
:'ports/src/noux': Noux is an experimental implementation of a UNIX-like API
|
|
that enables the use of unmodified command-line based GNU software. For using
|
|
noux, refer to the run script 'ports/run/noux.run'.
|
|
|
|
:'ports-foc/src/l4linux': L4Linux is a paravirtualized Linux kernel that
|
|
enables the use of Linux-based OSes as subsystems on the Fiasco.OC kernel.
|
|
For using L4Linux, refer to the run script 'ports-foc/run/l4linux.run'.
|
|
|
|
:'ports-foc/src/l4android': L4Android is a variant of L4Linux that is able
|
|
to execute the Android software stack on top of the Fiasco.OC kernel.
|
|
|
|
:'ports/src/app/seoul': Seoul is a virtual-machine monitor developed for
|
|
the use with the NOVA platform. It virtualizes 32bit x86 PC hardware
|
|
including various peripherals.
|
|
|
|
:'os/src/server/loader': A service that allows the creation and destruction
|
|
of Genode subsystems via a session interface. For further information,
|
|
refer to 'os/src/server/loader/README'.
|
|
|
|
:'ports/src/app/dosbox': A port of DosBox for executing DOS software.
|
|
|
|
:'ports/src/virtualbox': VirtualBox running on top of the NOVA hypervisor.
|
|
|