mirror of
https://github.com/genodelabs/genode.git
synced 2024-12-20 14:13:09 +00:00
d131e537e9
- Drop unnecessary patch - Improved build speed/parallelization - Increased log channel size - Fix path in base-hw/Muen documentation
165 lines
6.5 KiB
Plaintext
165 lines
6.5 KiB
Plaintext
|
|
=============================================
|
|
Getting started with 'base-hw' on the Muen SK
|
|
=============================================
|
|
|
|
|
|
The Muen Team
|
|
|
|
Abstract
|
|
########
|
|
|
|
This is a short tutorial that depicts a handy way to get a Genode image, built
|
|
with 'base-hw', started as subject on the Muen Separation Kernel (SK)
|
|
[https://muen.sk].
|
|
|
|
Tutorial
|
|
########
|
|
|
|
For information on how to download, build and prove the Muen SK refer to the
|
|
project website. In summary: install the Ada/SPARK tool-chain and all required
|
|
distribution packages. Also ensure that you have installed the Genode tool-chain
|
|
that is available at:
|
|
|
|
:[https://genode.org/download/tool-chain]:
|
|
Genode tool-chain
|
|
|
|
To automatically download the Muen kernel and integrate it with Genode, issue
|
|
the following commands:
|
|
|
|
! cd <genode_dir>
|
|
! ./tool/ports/prepare_port muen
|
|
|
|
The next step is to create a build directory prepared for compiling Genode for
|
|
Muen. Use the create_builddir tool for this task:
|
|
|
|
! ./tool/create_builddir muen
|
|
|
|
You can customize Muen system by changing the --image-muen RUN_OPT parameters
|
|
in the 'build.conf' file in the build directory under build/etc.
|
|
|
|
The file contains explanatory comments above each configuration variable, which
|
|
are all set to their default values.
|
|
|
|
Muen systems are built for a specific hardware platform and by default the
|
|
system is built for the Lenovo T430s. All currently supported platforms have a
|
|
corresponding hardware specification which can be found in the Muen project
|
|
directory under 'policy/hardware'. Note that the Muen project directory can be
|
|
found at '<genode_dir>/contrib/muen-*/src/kernel/muen'.
|
|
|
|
To get a list of all currently supported hardware platforms issue the following
|
|
command:
|
|
|
|
! ls contrib/muen-*/src/kernel/muen/policy/hardware/ | grep -v common
|
|
|
|
Set the '--image-muen-hardware' and '--image-muen-platform' parameters to point
|
|
to the configuration files of your intended hardware platform. Note that the
|
|
specified paths for both '--image-muen-hardware', '--image-muen-platform' and
|
|
'--image-muen-system' must be either relative to the Muen policy directory
|
|
(e.g. 'platform/lenovo-t430s.xml' or 'xml/genode-base_hw_simple.xml') or
|
|
absolute paths. Also change the other parameters to match your environment.
|
|
|
|
If no hardware configuration for your specific hardware is available, refer to
|
|
the README of the 'mugenhwcfg' tool
|
|
[https://git.codelabs.ch/?p=muen/mugenhwcfg.git] for instructions on how to
|
|
generate a new configuration.
|
|
|
|
You can now change to the created build directory and compile a Genode system:
|
|
|
|
! cd build/muen/
|
|
! make run/log
|
|
|
|
Once the build is done, the Muen system which contains the Genode scenario is
|
|
available as a Multiboot binary image under 'var/run/log/image.bin'. If an
|
|
error occurs during the Muen build process check the log file located at
|
|
'kernel/build.log'.
|
|
|
|
Automated hardware deployment
|
|
#############################
|
|
|
|
For automated deployment and execution on real hardware, the iPXE and AMT run
|
|
mechanisms provided by the Genode build system can be used. The modules are
|
|
controlled by the RUN_OPT variable specified in the 'etc/build.conf' file. An
|
|
example configuration for executing a Muen/Genode system on a real x86 machine
|
|
using AMT for resetting the target system and capturing the log output while
|
|
loading the Muen system image via iPXE:
|
|
|
|
!RUN_OPT += --include power_on/amt
|
|
!RUN_OPT += --power-on-amt-host 192.168.254.2
|
|
!RUN_OPT += --power-on-amt-password 'foo!'
|
|
!RUN_OPT += --include load/ipxe
|
|
!RUN_OPT += --load-ipxe-base-dir /srv/www
|
|
!RUN_OPT += --load-ipxe-boot-dir boot
|
|
!RUN_OPT += --include log/amt
|
|
!RUN_OPT += --log-amt-host 192.168.254.2
|
|
!RUN_OPT += --log-amt-password 'foo!'
|
|
|
|
The target machine is expected to request the following iPXE configuration:
|
|
http://${HOST_URL}/${ipxe-boot-dir}/boot.cfg. This can be achieved by building
|
|
iPXE with the following embedded script:
|
|
|
|
! #!ipxe
|
|
! dhcp
|
|
! chain http://${HOST_URL}/${ipxe-boot-dir}/boot.cfg
|
|
|
|
For additional information on iPXE and embedded scripts refer to the iPXE website
|
|
at [http://ipxe.org/howto/chainloading#breaking_the_loop_with_an_embedded_script].
|
|
|
|
The deployment host must serve the Genode system image via http. In the above
|
|
example the root directory of the webserver is '/srv/www'. Note that the
|
|
webserver must support ranged requests as otherwise iPXE will not load (large)
|
|
system image files correctly.
|
|
|
|
Integration of Muen with Genode
|
|
###############################
|
|
|
|
Instead of letting the Genode build system compile and assemble the complete
|
|
Muen system, you can let it only build a specific Genode base-hw run scenario
|
|
and then do the integration yourself. This will for example allow you to run a
|
|
simple script like run/log on Muen in the Bochs x86 emulator
|
|
[http://bochs.sf.net], removing the requirement for having access to supported
|
|
hardware.
|
|
|
|
As a first step acquire the Muen sources by executing the following commands:
|
|
|
|
! git clone https://git.codelabs.ch/git/muen.git
|
|
! cd muen
|
|
! git submodule update --init tools/mugenschedcfg
|
|
! git submodule update --init components/libxhcidbg
|
|
! make SYSTEM=xml/genode-base_hw_simple.xml COMPONENTS="libdebuglog libmudm libmutime libxhcidbg dbgserver sm time" emulate
|
|
|
|
This will build a Muen SK system and start it using the Bochs emulator. You
|
|
should get the following error:
|
|
|
|
! mupack: File '<muen_workdir>/pack/../policy/obj/base_hw' referenced by
|
|
! physical memory region 'base_hw|bin' not found
|
|
|
|
This means that the Muen packer tool was unable to find the component binary
|
|
'base_hw', which is expected since it has not yet been compiled.
|
|
|
|
Now it is time to build the Genode 'base-hw' image for Muen. To tell the Genode
|
|
build system that the Muen system integration is performed externally by
|
|
changing the --image-muen-external-build parameter in the 'etc/build.conf' file
|
|
within your build Genode directory like so:
|
|
|
|
! RUN_OPT += --image-muen-external-build 1
|
|
|
|
After this change you can build the Genode 'base-hw' image and export it to the
|
|
Muen working directory using the following command:
|
|
|
|
! objcopy -O binary var/run/log/boot/image.elf <muen_workdir>/policy/obj/base_hw
|
|
|
|
Change back to the Muen working directory to package the system image and
|
|
restart emulation:
|
|
|
|
! cd <muen_workdir>
|
|
! make SYSTEM=xml/genode-base_hw_simple.xml COMPONENTS="libdebuglog libmudm libmutime libxhcidbg dbgserver sm time" emulate
|
|
|
|
The serial output of the system is written to the
|
|
'<muen_workdir>/emulate/serial.out' file. You should see the following line:
|
|
|
|
! [init -> test-log] Test done.
|
|
|
|
This indicates the successful execution of the Genode 'run/log' scenario as
|
|
Muen subject on Bochs.
|