genode/repos/dde_linux/patches/mem.patch
Norman Feske ca971bbfd8 Move repositories to 'repos/' subdirectory
This patch changes the top-level directory layout as a preparatory
step for improving the tools for managing 3rd-party source codes.
The rationale is described in the issue referenced below.

Issue #1082
2014-05-14 16:08:00 +02:00

751 lines
24 KiB
Diff

diff -r 477429e02fe0 drivers/hid/usbhid/hid-core.c
--- a/drivers/hid/usbhid/hid-core.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/hid/usbhid/hid-core.c Tue Aug 13 14:58:40 2013 +0200
@@ -895,7 +895,7 @@
&usbhid->inbuf_dma);
usbhid->outbuf = usb_alloc_coherent(dev, usbhid->bufsize, GFP_KERNEL,
&usbhid->outbuf_dma);
- usbhid->cr = kmalloc(sizeof(*usbhid->cr), GFP_KERNEL);
+ usbhid->cr = kmalloc(sizeof(*usbhid->cr), GFP_NOIO);
usbhid->ctrlbuf = usb_alloc_coherent(dev, usbhid->bufsize, GFP_KERNEL,
&usbhid->ctrlbuf_dma);
if (!usbhid->inbuf || !usbhid->outbuf || !usbhid->cr ||
@@ -1053,7 +1053,7 @@
return -EINVAL;
}
- if (!(rdesc = kmalloc(rsize, GFP_KERNEL))) {
+ if (!(rdesc = kmalloc(rsize, GFP_NOIO))) {
dbg_hid("couldn't allocate rdesc memory\n");
return -ENOMEM;
}
diff -r 477429e02fe0 drivers/net/usb/usbnet.c
--- a/drivers/net/usb/usbnet.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/net/usb/usbnet.c Tue Aug 13 14:58:40 2013 +0200
@@ -253,7 +253,7 @@
period = max ((int) dev->status->desc.bInterval,
(dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
- buf = kmalloc (maxp, GFP_KERNEL);
+ buf = kmalloc (maxp, GFP_NOIO);
if (buf) {
dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
if (!dev->interrupt) {
@@ -1606,7 +1606,7 @@
if (!--dev->suspend_count) {
/* resume interrupt URBs */
if (dev->interrupt && test_bit(EVENT_DEV_OPEN, &dev->flags))
- usb_submit_urb(dev->interrupt, GFP_NOIO);
+ usb_submit_urb(dev->interrupt, GFP_KERNEL);
spin_lock_irq(&dev->txq.lock);
while ((res = usb_get_from_anchor(&dev->deferred))) {
@@ -1633,7 +1633,7 @@
netif_device_present(dev->net) &&
!timer_pending(&dev->delay) &&
!test_bit(EVENT_RX_HALT, &dev->flags))
- rx_alloc_submit(dev, GFP_NOIO);
+ rx_alloc_submit(dev, GFP_KERNEL);
if (!(dev->txq.qlen >= TX_QLEN(dev)))
netif_tx_wake_all_queues(dev->net);
@@ -1684,7 +1684,7 @@
cmd, reqtype, value, index, size);
if (data) {
- buf = kmalloc(size, GFP_KERNEL);
+ buf = kmalloc(size, GFP_NOIO);
if (!buf)
goto out;
}
@@ -1711,7 +1711,7 @@
cmd, reqtype, value, index, size);
if (data) {
- buf = kmemdup(data, size, GFP_KERNEL);
+ buf = kmemdup(data, size, GFP_NOIO);
if (!buf)
goto out;
}
@@ -1823,7 +1823,7 @@
}
if (data) {
- buf = kmemdup(data, size, GFP_ATOMIC);
+ buf = kmemdup(data, size, GFP_NOIO);
if (!buf) {
netdev_err(dev->net, "Error allocating buffer"
" in %s!\n", __func__);
@@ -1831,7 +1831,7 @@
}
}
- req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
+ req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
if (!req)
goto fail_free_buf;
diff -r 477429e02fe0 drivers/usb/core/config.c
--- a/drivers/usb/core/config.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/core/config.c Tue Aug 13 14:58:40 2013 +0200
@@ -689,7 +689,7 @@
if (!dev->rawdescriptors)
goto err2;
- desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
+ desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_NOIO);
if (!desc)
goto err2;
@@ -718,7 +718,7 @@
USB_DT_CONFIG_SIZE);
/* Now that we know the length, get the whole thing */
- bigbuffer = kmalloc(length, GFP_KERNEL);
+ bigbuffer = kmalloc(length, GFP_NOIO);
if (!bigbuffer) {
result = -ENOMEM;
goto err;
@@ -777,7 +777,7 @@
int length, total_len, num, i;
int ret;
- bos = kzalloc(sizeof(struct usb_bos_descriptor), GFP_KERNEL);
+ bos = kzalloc(sizeof(struct usb_bos_descriptor), GFP_NOIO);
if (!bos)
return -ENOMEM;
@@ -803,7 +803,7 @@
return -ENOMEM;
/* Now let's get the whole BOS descriptor set */
- buffer = kzalloc(total_len, GFP_KERNEL);
+ buffer = kzalloc(total_len, GFP_NOIO);
if (!buffer) {
ret = -ENOMEM;
goto err;
diff -r 477429e02fe0 drivers/usb/core/devices.c
--- a/drivers/usb/core/devices.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/core/devices.c Tue Aug 13 14:58:40 2013 +0200
@@ -513,7 +513,7 @@
return 0;
/* allocate 2^1 pages = 8K (on i386);
* should be more than enough for one device */
- pages_start = (char *)__get_free_pages(GFP_NOIO, 1);
+ pages_start = (char *)__get_free_pages(GFP_KERNEL, 1);
if (!pages_start)
return -ENOMEM;
diff -r 477429e02fe0 drivers/usb/core/hub.c
--- a/drivers/usb/core/hub.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/core/hub.c Tue Aug 13 14:58:40 2013 +0200
@@ -1049,7 +1049,7 @@
hcd = bus_to_hcd(hdev->bus);
if (hcd->driver->update_hub_device) {
ret = hcd->driver->update_hub_device(hcd, hdev,
- &hub->tt, GFP_NOIO);
+ &hub->tt, GFP_KERNEL);
if (ret < 0) {
dev_err(hub->intfdev, "Host not "
"accepting hub info "
@@ -1195,7 +1195,7 @@
init3:
hub->quiescing = 0;
- status = usb_submit_urb(hub->urb, GFP_NOIO);
+ status = usb_submit_urb(hub->urb, GFP_KERNEL);
if (status < 0)
dev_err(hub->intfdev, "activate --> %d\n", status);
if (hub->has_indicators && blinkenlights)
@@ -1286,20 +1286,20 @@
unsigned unit_load;
unsigned full_load;
- hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL);
+ hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_NOIO);
if (!hub->buffer) {
ret = -ENOMEM;
goto fail;
}
- hub->status = kmalloc(sizeof(*hub->status), GFP_KERNEL);
+ hub->status = kmalloc(sizeof(*hub->status), GFP_NOIO);
if (!hub->status) {
ret = -ENOMEM;
goto fail;
}
mutex_init(&hub->status_mutex);
- hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
+ hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_NOIO);
if (!hub->descriptor) {
ret = -ENOMEM;
goto fail;
@@ -3444,9 +3444,9 @@
/*
* usb_enable_lpm() can be called as part of a failed device reset,
* which may be initiated by an error path of a mass storage driver.
- * Therefore, use GFP_NOIO.
+ * Therefore, use GFP_KERNEL.
*/
- sel_values = kmalloc(sizeof *(sel_values), GFP_NOIO);
+ sel_values = kmalloc(sizeof *(sel_values), GFP_KERNEL);
if (!sel_values)
return -ENOMEM;
@@ -4224,7 +4224,7 @@
struct usb_qualifier_descriptor *qual;
int status;
- qual = kmalloc (sizeof *qual, GFP_KERNEL);
+ qual = kmalloc (sizeof *qual, GFP_NOIO);
if (qual == NULL)
return;
@@ -4942,7 +4942,7 @@
len = max(len, old_length);
}
- buf = kmalloc(len, GFP_NOIO);
+ buf = kmalloc(len, GFP_KERNEL);
if (buf == NULL) {
dev_err(&udev->dev, "no mem to re-read configs after reset\n");
/* assume the worst */
diff -r 477429e02fe0 drivers/usb/core/message.c
--- a/drivers/usb/core/message.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/core/message.c Tue Aug 13 14:58:40 2013 +0200
@@ -50,7 +50,7 @@
init_completion(&ctx.done);
urb->context = &ctx;
urb->actual_length = 0;
- retval = usb_submit_urb(urb, GFP_NOIO);
+ retval = usb_submit_urb(urb, GFP_KERNEL);
if (unlikely(retval))
goto out;
@@ -87,7 +87,7 @@
int retv;
int length;
- urb = usb_alloc_urb(0, GFP_NOIO);
+ urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
@@ -865,11 +865,11 @@
if (index <= 0)
return NULL;
- buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO);
+ buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL);
if (buf) {
len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
if (len > 0) {
- smallbuf = kmalloc(++len, GFP_NOIO);
+ smallbuf = kmalloc(++len, GFP_KERNEL);
if (!smallbuf)
return buf;
memcpy(smallbuf, buf, len);
@@ -940,7 +940,7 @@
int usb_get_status(struct usb_device *dev, int type, int target, void *data)
{
int ret;
- u16 *status = kmalloc(sizeof(*status), GFP_KERNEL);
+ u16 *status = kmalloc(sizeof(*status), GFP_NOIO);
if (!status)
return -ENOMEM;
@@ -1730,7 +1730,7 @@
if (cp) {
nintf = cp->desc.bNumInterfaces;
new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
- GFP_NOIO);
+ GFP_KERNEL);
if (!new_interfaces) {
dev_err(&dev->dev, "Out of memory\n");
return -ENOMEM;
@@ -1739,7 +1739,7 @@
for (; n < nintf; ++n) {
new_interfaces[n] = kzalloc(
sizeof(struct usb_interface),
- GFP_NOIO);
+ GFP_KERNEL);
if (!new_interfaces[n]) {
dev_err(&dev->dev, "Out of memory\n");
ret = -ENOMEM;
diff -r 477429e02fe0 drivers/usb/host/xhci-hub.c
--- a/drivers/usb/host/xhci-hub.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/host/xhci-hub.c Tue Aug 13 14:58:40 2013 +0200
@@ -275,7 +275,7 @@
ret = 0;
virt_dev = xhci->devs[slot_id];
- cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO);
+ cmd = xhci_alloc_command(xhci, false, true, GFP_KERNEL);
if (!cmd) {
xhci_dbg(xhci, "Couldn't allocate command structure.\n");
return -ENOMEM;
diff -r 477429e02fe0 drivers/usb/host/xhci.c
--- a/drivers/usb/host/xhci.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/host/xhci.c Tue Aug 13 14:58:40 2013 +0200
@@ -1277,7 +1277,7 @@
size = 1;
urb_priv = kzalloc(sizeof(struct urb_priv) +
- size * sizeof(struct xhci_td *), mem_flags);
+ size * sizeof(struct xhci_td *), GFP_NOIO);
if (!urb_priv)
return -ENOMEM;
@@ -1706,7 +1706,7 @@
* process context, not interrupt context (or so documenation
* for usb_set_interface() and usb_set_configuration() claim).
*/
- if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) {
+ if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_KERNEL) < 0) {
dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
__func__, ep->desc.bEndpointAddress);
return -ENOMEM;
@@ -3363,10 +3363,10 @@
/* Allocate the command structure that holds the struct completion.
* Assume we're in process context, since the normal device reset
* process has to wait for the device anyway. Storage devices are
- * reset as part of error handling, so use GFP_NOIO instead of
+ * reset as part of error handling, so use GFP_KERNEL instead of
* GFP_KERNEL.
*/
- reset_device_cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO);
+ reset_device_cmd = xhci_alloc_command(xhci, false, true, GFP_KERNEL);
if (!reset_device_cmd) {
xhci_dbg(xhci, "Couldn't allocate command structure.\n");
return -ENOMEM;
@@ -3610,11 +3610,11 @@
}
spin_unlock_irqrestore(&xhci->lock, flags);
}
- /* Use GFP_NOIO, since this function can be called from
+ /* Use GFP_KERNEL, since this function can be called from
* xhci_discover_or_reset_device(), which may be called as part of
* mass storage driver error handling.
*/
- if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
+ if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) {
xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
goto disable_slot;
}
diff -r 477429e02fe0 drivers/usb/storage/alauda.c
--- a/drivers/usb/storage/alauda.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/storage/alauda.c Tue Aug 13 14:58:40 2013 +0200
@@ -448,8 +448,8 @@
num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
+ MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
- MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
- MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
+ MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_KERNEL);
+ MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_KERNEL);
if (alauda_reset_media(us) != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -577,8 +577,8 @@
unsigned int lba_offset, lba_real, blocknum;
unsigned int zone_base_lba = zone * uzonesize;
unsigned int zone_base_pba = zone * zonesize;
- u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
- u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
+ u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_KERNEL);
+ u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_KERNEL);
if (lba_to_pba == NULL || pba_to_lba == NULL) {
result = USB_STOR_TRANSPORT_ERROR;
goto error;
@@ -940,7 +940,7 @@
*/
len = min(sectors, blocksize) * (pagesize + 64);
- buffer = kmalloc(len, GFP_NOIO);
+ buffer = kmalloc(len, GFP_KERNEL);
if (buffer == NULL) {
printk(KERN_WARNING "alauda_read_data: Out of memory\n");
return USB_STOR_TRANSPORT_ERROR;
@@ -1033,7 +1033,7 @@
*/
len = min(sectors, blocksize) * pagesize;
- buffer = kmalloc(len, GFP_NOIO);
+ buffer = kmalloc(len, GFP_KERNEL);
if (buffer == NULL) {
printk(KERN_WARNING "alauda_write_data: Out of memory\n");
return USB_STOR_TRANSPORT_ERROR;
@@ -1043,7 +1043,7 @@
* We also need a temporary block buffer, where we read in the old data,
* overwrite parts with the new data, and manipulate the redundancy data
*/
- blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO);
+ blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_KERNEL);
if (blockbuffer == NULL) {
printk(KERN_WARNING "alauda_write_data: Out of memory\n");
kfree(buffer);
@@ -1121,7 +1121,7 @@
struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
nand_init_ecc();
- us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO);
+ us->extra = kzalloc(sizeof(struct alauda_info), GFP_KERNEL);
if (!us->extra) {
US_DEBUGP("init_alauda: Gah! Can't allocate storage for"
"alauda info struct!\n");
diff -r 477429e02fe0 drivers/usb/storage/datafab.c
--- a/drivers/usb/storage/datafab.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/storage/datafab.c Tue Aug 13 14:58:40 2013 +0200
@@ -174,7 +174,7 @@
// bounce buffer and the actual transfer buffer.
alloclen = min(totallen, 65536u);
- buffer = kmalloc(alloclen, GFP_NOIO);
+ buffer = kmalloc(alloclen, GFP_KERNEL);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
@@ -258,7 +258,7 @@
// bounce buffer and the actual transfer buffer.
alloclen = min(totallen, 65536u);
- buffer = kmalloc(alloclen, GFP_NOIO);
+ buffer = kmalloc(alloclen, GFP_KERNEL);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
@@ -338,7 +338,7 @@
return USB_STOR_TRANSPORT_ERROR;
memcpy(command, scommand, 8);
- buf = kmalloc(512, GFP_NOIO);
+ buf = kmalloc(512, GFP_KERNEL);
if (!buf)
return USB_STOR_TRANSPORT_ERROR;
@@ -409,7 +409,7 @@
}
memcpy(command, scommand, 8);
- reply = kmalloc(512, GFP_NOIO);
+ reply = kmalloc(512, GFP_KERNEL);
if (!reply)
return USB_STOR_TRANSPORT_ERROR;
@@ -565,7 +565,7 @@
};
if (!us->extra) {
- us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO);
+ us->extra = kzalloc(sizeof(struct datafab_info), GFP_KERNEL);
if (!us->extra) {
US_DEBUGP("datafab_transport: Gah! "
"Can't allocate storage for Datafab info struct!\n");
diff -r 477429e02fe0 drivers/usb/storage/jumpshot.c
--- a/drivers/usb/storage/jumpshot.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/storage/jumpshot.c Tue Aug 13 14:58:40 2013 +0200
@@ -188,7 +188,7 @@
// bounce buffer and the actual transfer buffer.
alloclen = min(totallen, 65536u);
- buffer = kmalloc(alloclen, GFP_NOIO);
+ buffer = kmalloc(alloclen, GFP_KERNEL);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
@@ -265,7 +265,7 @@
// bounce buffer and the actual transfer buffer.
alloclen = min(totallen, 65536u);
- buffer = kmalloc(alloclen, GFP_NOIO);
+ buffer = kmalloc(alloclen, GFP_KERNEL);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
@@ -340,7 +340,7 @@
command[0] = 0xE0;
command[1] = 0xEC;
- reply = kmalloc(512, GFP_NOIO);
+ reply = kmalloc(512, GFP_KERNEL);
if (!reply)
return USB_STOR_TRANSPORT_ERROR;
@@ -493,7 +493,7 @@
};
if (!us->extra) {
- us->extra = kzalloc(sizeof(struct jumpshot_info), GFP_NOIO);
+ us->extra = kzalloc(sizeof(struct jumpshot_info), GFP_KERNEL);
if (!us->extra) {
US_DEBUGP("jumpshot_transport: Gah! Can't allocate storage for jumpshot info struct!\n");
return USB_STOR_TRANSPORT_ERROR;
diff -r 477429e02fe0 drivers/usb/storage/karma.c
--- a/drivers/usb/storage/karma.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/storage/karma.c Tue Aug 13 14:58:40 2013 +0200
@@ -182,11 +182,11 @@
static int rio_karma_init(struct us_data *us)
{
int ret = 0;
- struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
+ struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_KERNEL);
if (!data)
goto out;
- data->recv = kmalloc(RIO_RECV_LEN, GFP_NOIO);
+ data->recv = kmalloc(RIO_RECV_LEN, GFP_KERNEL);
if (!data->recv) {
kfree(data);
goto out;
diff -r 477429e02fe0 drivers/usb/storage/onetouch.c
--- a/drivers/usb/storage/onetouch.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/storage/onetouch.c Tue Aug 13 14:58:40 2013 +0200
@@ -163,7 +163,7 @@
usb_kill_urb(onetouch->irq);
break;
case US_RESUME:
- if (usb_submit_urb(onetouch->irq, GFP_NOIO) != 0)
+ if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0)
dev_err(&onetouch->irq->dev->dev,
"usb_submit_urb failed\n");
break;
diff -r 477429e02fe0 drivers/usb/storage/realtek_cr.c
--- a/drivers/usb/storage/realtek_cr.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/storage/realtek_cr.c Tue Aug 13 14:58:40 2013 +0200
@@ -367,7 +367,7 @@
u8 cmnd[12] = { 0 };
u8 *buf;
- buf = kmalloc(len, GFP_NOIO);
+ buf = kmalloc(len, GFP_KERNEL);
if (buf == NULL)
return USB_STOR_TRANSPORT_ERROR;
@@ -398,7 +398,7 @@
u8 cmnd[12] = { 0 };
u8 *buf;
- buf = kmemdup(data, len, GFP_NOIO);
+ buf = kmemdup(data, len, GFP_KERNEL);
if (buf == NULL)
return USB_STOR_TRANSPORT_ERROR;
@@ -427,7 +427,7 @@
u8 cmnd[12] = { 0 };
u8 *buf;
- buf = kmalloc(len, GFP_NOIO);
+ buf = kmalloc(len, GFP_KERNEL);
if (buf == NULL)
return USB_STOR_TRANSPORT_ERROR;
@@ -511,7 +511,7 @@
US_DEBUGP("%s, addr = 0xfe47, len = %d\n", __FUNCTION__, len);
- buf = kmemdup(data, len, GFP_NOIO);
+ buf = kmemdup(data, len, GFP_KERNEL);
if (!buf)
return USB_STOR_TRANSPORT_ERROR;
diff -r 477429e02fe0 drivers/usb/storage/sddr09.c
--- a/drivers/usb/storage/sddr09.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/storage/sddr09.c Tue Aug 13 14:58:40 2013 +0200
@@ -692,7 +692,7 @@
return result;
}
- buf = kmalloc(bulklen, GFP_NOIO);
+ buf = kmalloc(bulklen, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -768,7 +768,7 @@
// bounce buffer and the actual transfer buffer.
len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
- buffer = kmalloc(len, GFP_NOIO);
+ buffer = kmalloc(len, GFP_KERNEL);
if (buffer == NULL) {
printk(KERN_WARNING "sddr09_read_data: Out of memory\n");
return -ENOMEM;
@@ -1000,7 +1000,7 @@
pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
blocklen = (pagelen << info->blockshift);
- blockbuffer = kmalloc(blocklen, GFP_NOIO);
+ blockbuffer = kmalloc(blocklen, GFP_KERNEL);
if (!blockbuffer) {
printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
return -ENOMEM;
@@ -1011,7 +1011,7 @@
// at a time between the bounce buffer and the actual transfer buffer.
len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
- buffer = kmalloc(len, GFP_NOIO);
+ buffer = kmalloc(len, GFP_KERNEL);
if (buffer == NULL) {
printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
kfree(blockbuffer);
@@ -1230,7 +1230,7 @@
alloc_blocks = min(numblocks, SDDR09_READ_MAP_BUFSZ >> CONTROL_SHIFT);
alloc_len = (alloc_blocks << CONTROL_SHIFT);
- buffer = kmalloc(alloc_len, GFP_NOIO);
+ buffer = kmalloc(alloc_len, GFP_KERNEL);
if (buffer == NULL) {
printk(KERN_WARNING "sddr09_read_map: out of memory\n");
result = -1;
@@ -1242,8 +1242,8 @@
kfree(info->lba_to_pba);
kfree(info->pba_to_lba);
- info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
- info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
+ info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_KERNEL);
+ info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_KERNEL);
if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
printk(KERN_WARNING "sddr09_read_map: out of memory\n");
@@ -1438,7 +1438,7 @@
return -EINVAL;
}
- us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
+ us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_KERNEL);
if (!us->extra)
return -ENOMEM;
us->extra_destructor = sddr09_card_info_destructor;
diff -r 477429e02fe0 drivers/usb/storage/sddr55.c
--- a/drivers/usb/storage/sddr55.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/storage/sddr55.c Tue Aug 13 14:58:40 2013 +0200
@@ -216,7 +216,7 @@
len = min((unsigned int) sectors, (unsigned int) info->blocksize >>
info->smallpageshift) * PAGESIZE;
- buffer = kmalloc(len, GFP_NOIO);
+ buffer = kmalloc(len, GFP_KERNEL);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR; /* out of memory */
offset = 0;
@@ -344,7 +344,7 @@
len = min((unsigned int) sectors, (unsigned int) info->blocksize >>
info->smallpageshift) * PAGESIZE;
- buffer = kmalloc(len, GFP_NOIO);
+ buffer = kmalloc(len, GFP_KERNEL);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
offset = 0;
@@ -661,7 +661,7 @@
numblocks = info->capacity >> (info->blockshift + info->pageshift);
- buffer = kmalloc( numblocks * 2, GFP_NOIO );
+ buffer = kmalloc( numblocks * 2, GFP_KERNEL );
if (!buffer)
return -1;
@@ -694,8 +694,8 @@
kfree(info->lba_to_pba);
kfree(info->pba_to_lba);
- info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
- info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
+ info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_KERNEL);
+ info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_KERNEL);
if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
kfree(info->lba_to_pba);
@@ -799,7 +799,7 @@
if (!us->extra) {
us->extra = kzalloc(
- sizeof(struct sddr55_card_info), GFP_NOIO);
+ sizeof(struct sddr55_card_info), GFP_KERNEL);
if (!us->extra)
return USB_STOR_TRANSPORT_ERROR;
us->extra_destructor = sddr55_card_info_destructor;
diff -r 477429e02fe0 drivers/usb/storage/shuttle_usbat.c
--- a/drivers/usb/storage/shuttle_usbat.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/storage/shuttle_usbat.c Tue Aug 13 14:58:40 2013 +0200
@@ -1068,7 +1068,7 @@
if (!us || !info)
return USB_STOR_TRANSPORT_ERROR;
- reply = kmalloc(512, GFP_NOIO);
+ reply = kmalloc(512, GFP_KERNEL);
if (!reply)
return USB_STOR_TRANSPORT_ERROR;
@@ -1153,7 +1153,7 @@
*/
alloclen = min(totallen, 65536u);
- buffer = kmalloc(alloclen, GFP_NOIO);
+ buffer = kmalloc(alloclen, GFP_KERNEL);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
@@ -1244,7 +1244,7 @@
*/
alloclen = min(totallen, 65536u);
- buffer = kmalloc(alloclen, GFP_NOIO);
+ buffer = kmalloc(alloclen, GFP_KERNEL);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
@@ -1348,7 +1348,7 @@
len = (65535/srb->transfersize) * srb->transfersize;
US_DEBUGP("Max read is %d bytes\n", len);
len = min(len, scsi_bufflen(srb));
- buffer = kmalloc(len, GFP_NOIO);
+ buffer = kmalloc(len, GFP_KERNEL);
if (buffer == NULL) /* bloody hell! */
return USB_STOR_TRANSPORT_FAILED;
sector = short_pack(data[7+3], data[7+2]);
@@ -1459,7 +1459,7 @@
unsigned char subcountL = USBAT_ATA_LBA_ME;
unsigned char *status = us->iobuf;
- us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO);
+ us->extra = kzalloc(sizeof(struct usbat_info), GFP_KERNEL);
if (!us->extra) {
US_DEBUGP("init_usbat: Gah! Can't allocate storage for usbat info struct!\n");
return 1;
diff -r 477429e02fe0 drivers/usb/storage/transport.c
--- a/drivers/usb/storage/transport.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/storage/transport.c Tue Aug 13 14:58:40 2013 +0200
@@ -151,7 +151,7 @@
us->current_urb->transfer_dma = us->iobuf_dma;
/* submit the URB */
- status = usb_submit_urb(us->current_urb, GFP_NOIO);
+ status = usb_submit_urb(us->current_urb, GFP_KERNEL);
if (status) {
/* something went wrong */
return status;
@@ -429,7 +429,7 @@
US_DEBUGP("%s: xfer %u bytes, %d entries\n", __func__,
length, num_sg);
result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0,
- sg, num_sg, length, GFP_NOIO);
+ sg, num_sg, length, GFP_KERNEL);
if (result) {
US_DEBUGP("usb_sg_init returned %d\n", result);
return USB_STOR_XFER_ERROR;
diff -r 477429e02fe0 drivers/usb/storage/usb.c
--- a/drivers/usb/storage/usb.c Tue Aug 13 14:57:26 2013 +0200
+++ b/drivers/usb/storage/usb.c Tue Aug 13 14:58:40 2013 +0200
@@ -453,7 +453,7 @@
usb_set_intfdata(intf, us);
/* Allocate the control/setup and DMA-mapped buffers */
- us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL);
+ us->cr = kmalloc(sizeof(*us->cr), GFP_NOIO);
if (!us->cr) {
US_DEBUGP("usb_ctrlrequest allocation failed\n");
return -ENOMEM;