Martin Stein b6efa7f6f9 timer connection: fast initial calibration ... The calibration of the interpolation parameters was previously only done periodically every 500 ms. Together with the fact that the parameters had to be stable for at least 3 calibration steps to enable interpolation, it took at least 1.5 seconds after establishing a connection to get microseconds-precise time values. This is a problem for some drivers that directly start to poll time. Thus, the timer connection now does a calibration burst as soon as it switches to the modern mode (the mode with microseconds precision). During this phase it does several (currently 9) calibration steps without a delay inbetween. It is assumed that this is fast enough to not get interrupted by scheduling. Thus, despite being small, the measured values should be very stable which is why the burst should in most cases be sufficient to get the interpolation initialized. Ref #2400		2017-08-23 14:08:37 +02:00
..
audio_in_session	API documentation refinements	2017-05-31 13:16:21 +02:00
audio_out_session	API documentation refinements	2017-05-31 13:16:21 +02:00
blit	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
block	Replace Quota_exceeded by Insufficient_ram_quota	2017-05-31 13:16:05 +02:00
block_session	API documentation refinements	2017-05-31 13:16:21 +02:00
cli_monitor	Integrate core's RAM service into the PD service	2017-05-31 13:16:14 +02:00
decorator	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
file_system	file system: track content via version counter	2017-08-17 10:59:43 +02:00
file_system_session	file system: use Id_space instead of Node_handle_registry	2017-08-17 10:59:43 +02:00
framebuffer_session	API documentation refinements	2017-05-31 13:16:21 +02:00
gpio	Streamline exception types	2017-05-31 13:16:07 +02:00
gpio_session	API documentation refinements	2017-05-31 13:16:21 +02:00
gpu	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
init	Adaptation to init refactoring	2017-03-24 16:19:56 +01:00
input	Streamline exception types	2017-05-31 13:16:07 +02:00
input_session	API documentation refinements	2017-05-31 13:16:21 +02:00
ldso	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
loader_session	API documentation refinements	2017-05-31 13:16:21 +02:00
mixer	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
net	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
nic	Replace Quota_exceeded by Insufficient_ram_quota	2017-05-31 13:16:05 +02:00
nic_bridge	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
nic_session	API documentation refinements	2017-05-31 13:16:21 +02:00
nitpicker_gfx	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
nitpicker_session	API documentation refinements	2017-05-31 13:16:21 +02:00
os	Translate buffer-exceeded exception in Session_requester	2017-06-29 12:00:03 +02:00
packet_stream_rx	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
packet_stream_tx	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
platform_device	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
platform_session	Annotate session interfaces with CAP_QUOTA	2017-05-31 13:16:04 +02:00
ram_fs	file system: use Id_space instead of Node_handle_registry	2017-08-17 10:59:43 +02:00
regulator	Streamline exception types	2017-05-31 13:16:07 +02:00
regulator_session	API documentation refinements	2017-05-31 13:16:21 +02:00
report_rom	Streamline exception types	2017-05-31 13:16:07 +02:00
report_session	API documentation refinements	2017-05-31 13:16:21 +02:00
rtc_session	Optional session label for Rtc connection constructor	2017-05-31 13:16:22 +02:00
spec	riscv: ISA-1.9.1 and GCC-6.3.0 adaptions	2017-05-31 13:16:24 +02:00
terminal	terminal: add Cell_array destructor	2017-05-31 13:16:12 +02:00
terminal_session	API documentation refinements	2017-05-31 13:16:21 +02:00
timer	os/timer: interpolate time via timestamps	2017-05-31 13:16:11 +02:00
timer_session	timer connection: fast initial calibration	2017-08-23 14:08:37 +02:00
trace	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
uart_session	API documentation refinements	2017-05-31 13:16:21 +02:00
usb	usb: use if-else in packet_handler	2017-06-19 12:35:57 +02:00
usb_session	API documentation refinements	2017-05-31 13:16:21 +02:00
util	Adjust file headers to refer to the AGPLv3	2017-02-28 12:59:29 +01:00
vfs	VFS: move 'sync' from 'File_system' to 'Directory_service'	2017-06-12 14:32:07 +02:00