mirror of
https://github.com/genodelabs/genode.git
synced 2024-12-20 22:23:16 +00:00
94 lines
3.3 KiB
Plaintext
94 lines
3.3 KiB
Plaintext
This repository contains device drivers ported from OpenBSD.
|
|
|
|
Audio
|
|
#####
|
|
|
|
The audio driver is ported from OpenBSD 7.3 and includes support for
|
|
Intel HD Audio devices. The HDA driver works on real hardware and
|
|
supposedly in VirtualBox.
|
|
|
|
|
|
Usage and configuration
|
|
=======================
|
|
|
|
You have to prepare the contrib sources for this repository by
|
|
executing _./tool/ports/prepare_port dde_bsd_. Also you need to make
|
|
sure to add the 'dde_bsd' repository to the REPOSITORIES variable
|
|
in your 'etc/build.conf'.
|
|
|
|
Reporting of the mixer state is enabled by adding the 'report_mixer'
|
|
attribute to the drivers configuration and setting its value to 'yes'.
|
|
|
|
The following snippets illustrates the format of the report:
|
|
|
|
!<mixer_state>
|
|
! <mixer field="inputs.beep" value="108"/>
|
|
! <mixer field="outputs.hp_sense" value="plugged"/>
|
|
! <mixer field="outputs.master" value="128,128"/>
|
|
! <mixer field="outputs.mic_sense" value="unplugged"/>
|
|
! <mixer field="outputs.spkr_muters" value="hp,mic"/>
|
|
!</mixer_state>
|
|
|
|
The mixer state may expose other mixer fields as well, depending on the
|
|
used sound card. The naming scheme of the attributes intentionally
|
|
matches the naming scheme of OpenBSD's mixerctl(1) program.
|
|
|
|
Each 'mixer' node can be used to configure the audio driver by using it
|
|
in its configuration, e.g.:
|
|
|
|
!<config report_mixer="yes">
|
|
! <mixer field="outputs.master" value="255,255"/>
|
|
!</config>
|
|
|
|
This configuration will set the output volume to the highest possible
|
|
value. Although it is now also possible to update the configuration
|
|
at run-time it should not be done while the driver is currently playing
|
|
or recording because it may provoke the generation of artefacts.
|
|
|
|
The following configures the driver of playback and recording:
|
|
|
|
! <start name="pci_audio">
|
|
! <resource name="RAM" quantum="8M"/>
|
|
! <provides>
|
|
! <service name="Audio_out"/>
|
|
! <service name="Audio_in"/>
|
|
! </provides>
|
|
! <config>
|
|
! <mixer field="outputs.master" value="255"/>
|
|
! <mixer field="record.enable" value="on"/>
|
|
! <mixer field="record.adc-0:1_source" value="mic3"/>
|
|
! <mixer field="record.volume" value="128"/>
|
|
! </config>
|
|
! </start>
|
|
|
|
It is vital to enable recording by setting 'record.enable' to 'on' as
|
|
otherwise only silence will be delievered to the Audio_in session.
|
|
In addition to selecting the recording source, the playback as well as the
|
|
recording volume are set. When a single value is given the same value is
|
|
used for all channels. Depending on the used HDA device or rather the used
|
|
codec the available fields might differ and a different recording source
|
|
must be set for 'adc-0:1'. For example on a Thinkpad X220 the source must
|
|
be set to 'mic3' to select the internal microphone.
|
|
|
|
Information about the available mixers and settings in general
|
|
may be obtained by setting the 'verbose' to 'yes' in the config
|
|
node.
|
|
|
|
|
|
Examples
|
|
========
|
|
|
|
Playback can be tested by executing the run script
|
|
'repos/dde_bsd/run/audio_out.run'.
|
|
It will play a raw sample file in a loop. The file format is header less
|
|
two channel float 32 at 44100 Hz. You may use the 'sox' utility to create
|
|
such an audio file:
|
|
|
|
! sox -c 2 -r 44100 foo.wav foo.f32
|
|
|
|
Recording, on the other hand, can be tested by executing the run script
|
|
'repos/dde_bsd/run/audio_in.run'.
|
|
|
|
It will use a simply audio monitor test component that records samples
|
|
and plays them back immediately.
|