Test of File_system I/O scheduling. It appears that a client not
submitting I/O packets slower than the VFS server can process will
starve other clients.
Ref #2900
This component is contrasted with the fs_rom server that serves
independent dataspaces to each client. Using a cache was not possible
until the region map session supported the creation of read-only
attachments.
Test at run/read_only_rom.
Ref #1633Fix#2760
The verbosity mode of the NIC bridge can be toggled with the verbose attribute
(default value shown):
! <config verbose="no" />
If enabled, the NIC bridge logs sent and received packets as well as the
lifetime of interfaces connected to the bridge.
Issue #2899
The test triggers the following assertion in the kernel, which will
remain unfixed as the kernel is no longer developed:
Assertion queue_state.is_set(queue_state_t::send) failed in file
.../pistachio/kernel/src/api/v4/tcb.h, line 727
This assertion is presumably similar / related to issue #1495.
Quietly insert forward declaration of a Input::Binding class, and make
it a friend of Input::Event and Input::Session_client. This is to allow
non-C++ language bindings (Nim) to access private members by providing
their own implementation of the Binding class.
Fix#2889
The legacy PIT timer driver is too jittery for the character-repeat
test. This patch disables the test for platforms using this device as
user-level time source, which are at the moment OKL4, Pistachio, and
seL4.
Also remove 'requires_installation_of', while also checking sbin
directories in 'have_installed'. The run scripts have been adjusted
accordingly.
Fixes#2853
The 200-second timeout of the init test triggers on some test platform
(in particular on qemu) while it is overly pessimistic on others.
This patch aims at stabilizing the timing behavior of the test across
the tested kernels/machines.
This is a follow-up patch of "init: avoid too eager child restart". On
each config update of init, init re-applies child-specific configuration
changes. In the case of an already exited child, this re-evaluation
wrongly marked such a child as abandoned because the child's environment
sessions do no longer exist. Abandoning the child, in turn, triggers the
destruction and subseqent restart (because the <start> node of the
configuration still exists). The latter is bad for two reasons.
First, the exit state of the original instance becomes lost. Second, the
restart may have unexpected side effects due to sessions created by the
new instance. I.e., when resizing a partition in sculpt, init would
wrongly restart the gpt-write tool after the tool successfully exited.
This collides with a newly started instance of part_blk/resize2fs, which
now competes with the second gpt-write instance for the exclusive access
of the targeted block device.
The patch prevents init from re-applying configurations to exited
children. The accompanied test case covers the corner case.
Do not simply wait for the good ping test to finish, but for the other
flood tests to trigger the RAM exhaustion. This makes the test more
robust with slower platforms or a different timing.
Issue #2857
The log messages covered by verbose_packet_drop were previously
configured by the verbose attribute. This isn't the case anymore. Now,
you can configure them as follows:
! <config verbose_packet_drop="no" ... >
! <domain verbose_packet_drop="no" ... />
! <config/>
The new attribute determines whether to log each packet drop and the
rational behind it. The <config> value affects all domains without a
<domain> local value.
Issue #2857
The default value of each <domain> is the <config> value. However, if
a <domain> local value is set, the <config> value doesn't affect this
value at all.
Fixes#2874
The ICMP-Echo-server functionality of the router has the following
configuration attributes (default values shown):
! <config icmp_echo_server="yes">
! <domain icmp_echo_server="yes" ... />
! </config>
The icmp_echo_server attribute configures whether the router answers ICMP Echo
requests that address the router. The <config> value affects all domains
without a <domain> local value.
Issue #2874
When a domain is updated to a new component config, the two criteria for
keeping an ARP waiting state of a remote domain are whether the remote
domain still exists and whether its IP config is still the same. This
means that a domain must also dissolve all of its remote ARP waiting
states if its IP config changes (without an update of the component
config). This wasn't the case until now.
Issue #2840
The chroot server was conceived to automatically place File_system
sessions into segregated root directories by converting session labels
to paths. If multiple children needed to be grouped under the same path,
a 'merge' policy would truncate the session label before path conversion.
Now that init can rewrite session labels and thus reproduce truncation,
the chroot merge feature is redundant and can be removed.
Fix#2846
Removed the modified mark from handles that have been written to when
they are synced, otherwise a notification would be sent again when the
handle is closed.
Ref #2839
* Do not log events that are not critical (deadly) to the NIC router if not
configured to be verbose,
* Print almost all log lines with a prefix of the domain name they are
related to,
* And, do not use Genode::error and Genode::warning as they make it hard to
read the log with the domain name prefixes.
Fixes#2840
Introduce the uplink tag:
! <config>
! <uplink label="wifi" domain="uplink">
! <uplink label="wired" domain="wired_bridge">
! <uplink domain="wired_bridge">
! <config/>
For each uplink tag, the NIC router requests a NIC session with the
corresponding label or an empty label if there is no label attribute.
These NIC sessions get attached to the domain that is set in their
uplink tag as soon as the domain appears. This means their lifetime is
not bound to the domain. Uplink NIC sessions can be safely moved from
one domain to another without being closed by reconfiguring the
corresponding domain attribute.
Attention: This may render previously valid NIC router configurations
useless. A domain named "uplink" doesn't automatically request a NIC
session anymore. To fix these configurations, just add
! <uplink domain="uplink"/>
or
! <uplink label="[LABEL]" domain="uplink"/>
as direct subtag of the <config> tag.
Issue #2840
The term was used for the old configuration during the handling of a new
configuration but in other places it was already called old_config.
Issue #2840
Dissolve and destroy the invalid domain first before deinitializing all
domains for the next round. This way, the deinitialization is not done twice
for the invalid domain.
Issue #2840
Due to a bug in the deinitialization of the DHCP server of a domain (the
reference to the destroyed object was not cleared), the NIC router could
end up in a page fault caused by a double-free at the heap. This also fixes
the previously missing dissolving of the "DNS-server-from" relation to a
remote domain.
Issue #2840
Currently has three clients that continuously create new UDP/TCP/ICMP
connections through the NIC router with NAT to the outer world and they
get never closed. A fourth client does normal ping through the same
domain to the outer world that must succeed even after the RAM quota of
the other session at the router is exhausted. The test is restricted to
Qemu to not being at risk to flood real networks.
Issue #2857
This patch weakens the aggressive restart of a child with incomplete
environment sessions. The restart check is performed each time
the init configuration changes. In sculpt, this is not a rare special
case anymore but a frequent case when using the depot_rom as provider
for environment ROM sessions. In particular when starting a chain of
inter-depending children, the sculpt-manager quickly generates a
sequence of configurations with successively added start nodes.
The addition of the 'Cap_consumer' feature to app/dummy increased the
static RAM demand of the component to a point where 1 MiB no longer
suffices on sel4 (on this kernel, the base library uses a larger amount
of statically allocated data compared to the others). The tweaks enable
init.run and init_loop.run to work on sel4 on x86-64.
Selecting an alternate interface setting, even if it is the same as the
current one, apparently makes the INQUIRY command fail with USB devices
like 'SanDisk Ultra Fit' (0781:5583) and 'Corsair Flash Voyager'
(1b1c:1a03) when the USB block driver is restarted.
Fixes#2860
* Catch Quota_guard exceptions wherever we do 'new (_alloc)' in Interface
and in case drop the packet that caused the exception
* Modify Interface::handle_config_2 to not use the guarded allocator of the
NIC session quota as we cannot handle a RAM exhaustion well at this point
in time. Instead use a Constructible member in Interface so that a needed
RAM adds up to the calculation in the create_session implementation where
an exhaustion is handled via a service denial.
Issue #2857
The interface destructor called pure virtual methods at least when
cancelling ARP- waiting states. The implementations were made by the
deriving classes Session_component respectively Uplink. This led to an
abort of the NIC router as the destruction of the derived class was
already done. A similar problem already occured in the past during the
construction of Interface and was back then solved by introducing a
separate init() method. This commit, however, solved the problem by
making Interface a member of the other classes. Therefore, the init()
method could be removed again. Furthermore, the interface polica could be
moved from Session_component_base to Session_component. The commit also
had to generalize the way the link state of an interface is determined.
Fixes#2856
While a child is abandoned, we must limit the start of anothers with
the same name. Otherwise - of the child has startup problems - a number
of abandoned children with the same name may queue up. This becomes a
problem whenever the child destruction depends on an asynchronous
service that provides an env session for the children. If the service is
unable to keep up with the session requests (both create and close),
the queue of abandoned children becomes unbounded. Limiting the child
creation rate to one abandoned child per name mitigates this problem.
This patch reduces the latency of state reports when children are
removed or added, thereby, accellerating the feedback loop between a
management component and init during the staged startup or removal of
inter-dependent components.
This test monitors the RAM quota of a dynamic init and a server hosted
within the dynamic init in the presence of a repeatedly created and
destructed client.
Previously we were doing the initialization once over all domains,
remembered which of them became invalid and destroyed those afterwards.
This isn't sufficient. As soon as one domain becomes invalid we have to
dissolve/destroy this one, deinitialize all other domains again (as they
could contain references to the invalid domain) and retry to initialize
them from the beginning. We proceed with this until we have one run
without a domain becoming invalid. Then we can be sure that the last
initialization run did not create references to any invalid domain.
Issue #2840
The generic helper Avl_string_tree of the NIC router is currently only
used for finding domains via their names, but in the future it can be
used for finding uplinks by their labels also. Additionally, it enables
us to throw an exception when inserting two elements with the same
identifier.
Issue #2840
