This commit replaces the hand-crafted config processing by the use of
the 'List_model' utility. This has the following advantages:
- The parsing follows a common formalism that makes the code
easier to maintain and to understand. Several parts of the code
had to be changed (for the better) to make it fit the list model
approach. E.g., the child states have become more expressive
and logical.
- In the common case, the XML data is traversed only once, which
increases the parsing speed in dynamic scenarios.
- The code becomes easier to optimize. In particular, the patch skips
the re-evaluation of the session routing if no service is affected
by the config change.
The patch also revisits the init test by removing overly long sleep
phases and extending a few sleep phases that were too short when
executing the test on Qemu.
Issue #4068
This patch fixes a corner case where a child is destructed while a
asynchronous close request to a sibling server is still pending.
The child immediately discarded the session ID as the end of the
close-session processing, assuming that this ID is never to be needed
again. The session-state continues to exist to handle asynchrous close
protocol with the server.
However, if the child is destructed at this point (before the server
responded to the session request), the destruction of the child would
not cover the discharging of the session state because the session state
was no longer be part of the client's ID space. So once the asynchronous
close response from the server came in, the session state contained
stale information, in particular a stale closed_callback pointer.
The patch fixes the problem by deferring the discarding of the client ID
to the point where the session state is actually destructed. So the
session of a pending close response is covered by the child destructor.
Thanks to Pirmin Duss for reporting this issue along with a test
scenario for reproducing it!
Fixes#4039
This shim component can be used in case where env sessions of child
(i.e., child's PD session) must be routed to another child of init.
Without the shim, init would directly need to interact with these
sessions and would thereby make itself dependent of the server's
behavior. RPC calls to a server hosted as a child lead to all kinds of
problems such as livelock situations, and putting the robustness of init
at the whim of its child.
With the shim, init merely needs to bootstrap the shim component by
routing the shim's env sessions to core as usual. The server is only
used for the sessions for the actual application hosted atop the shim.
Issue #3837
Issue #4029
* Add new virtio device model
* Extend test run-script with vfat block test image
* Add vmm depot src recipe
* Use packages in test run-script
Fix#4025
In order to perform a smooth transition from NIC drivers that act only as NIC
session clients to NIC drivers that act only as Uplink session clients, this
commit introduces an intermediate state in which all NIC drivers support both
modes. That said, a NIC drivers mode is now statically determined through a new
optional 'mode' attribute in the drivers <config> tag that can be set to either
'nic_server' (default value) or 'uplink_client'. Reconfiguring this attribute
at a driver doesn't have any effects. Whithout this attribute being set, all
NIC drivers will behave the same as they did before the commit. When set to
'uplink_client', however, instead of providing a Nic service, they request
an Uplink session whenever their network interface becomes "UP" and close the
session whenever their network interface becomes "DOWN".
Ref #3961
Let the NIC router provide an Uplink service besides the Nic service that it
already provided. Requests for an Uplink session towards the NIC router are
assigned to Domains using the same <policy> configuration tags that are used in
order to assign Nic session requests. The MAC addresses of Uplink session
components are _NOT_ considered during the allocation of MAC addresses for NIC
session components at the same Domain. The task of avoiding MAC address clashes
between Uplink session components and Nic session components is therefore left
to the integrator. Apart from that, Uplink session components are treated by
the NIC router like any other interface.
Ref #3961
Adds new Uplink session interface, the corresponding client side (Client,
Connection), and the corresponding API archives. An Uplink session is almost
the same as a NIC session with the difference that the roles of the end points
are swapped. An Uplink client is the one that provides a network interface
(for instance, a NIC driver) whereas an Uplink server is the one that uses
that network interface (for instance, a networking stack).
Therefore, in contrast to the NIC session, MAC address and link state come from
the Uplink client. The link state is reflected through the lifetime of an
Uplink session: The client requests the session only when the link state is
"UP" and closes it whenever the link state becomes "DOWN" again. The MAC
address is transmitted from the Uplink client to the Uplink server as an
argument of the session request.
Ref #3961
* Introduce CPU quota for driver subsytem (needed by sd_card_drv)
* Introduce CPU quota for runtime subsytem and nic_drv (needed by fec_nic_drv)
* Increase CAP quota for inspect terminal slightly
* Add sculpt packages for imx8q_evk
Fix#3958
The driver is faily simple and does not support fancy features like
TCP checksum offloading or vlan filtering, but it is fully capable of
running every Genode network based scenario I've tried. Its currently
known to work on virt_qemu arm platforms and x86_64.
Fix#3825
To simplify writing native VirtIO drivers for Genode add helper classes
representing VirtIO device and queue. The queue implementation should
be platform independant. The device abstraction however is closely tied
to the VirtIO transport being used (PCI/MMIO). Both PCI and MMIO
implementations expose the same public API so the actual driver logic
should be the same regardless of which transport is used.
Its also important to note that the PCI version of Virtio::Device
currently does not support MSI-X interrupts. Unfortunately my kowledge
about PCI bus is very limited and my main area of interest was to get
VirtIO drivers working on virt_qemu ARM/Aarch64 platform. As such all
the VirtIO drivers I plan to submit will work with PCI bus, but might
not use some extended capabilities.
Ref #3825
The VirtIO device configuration on Qemu is dynamic. The
order and presence of different command line switches affects
base address and interrupt assignment of each device. One could
probably hard-code the necessary switches and resulting XML ARM
platform driver configuration in each run script, but this seems
like troublesome and hard to maintain solution.
This patch explores an alternative approach to the problem.
It implements a ROM driver which probes the address space region
Qemu virt machines assign to VirtIO MMIO devices and exposes the
result as XML via a ROM session. This XML output can be fed directly
as config to the generic ARM platform driver.
Ref #3825
Introduce the managing_system privilege for components like the
platform_driver to allow it to call system management functionality
that is reserved by kernel or special firmware, e.g., ARM Trusted Firmware.
The former RAM resource configuration attribute `constrain_phys`,
which enabled to constrain the region of physical RAM to be used,
gets replaced by the new, broader managing_system configuration
attribute of a `start` node. It gets enforced by the sandbox library.
Ref #3816
This commit applies the transition from the "Input" session to the "Event"
session to the event-filtering mechansim. The functionality of the
input_filter is now provided by the event_filter. The event filter
requests only one "Event" session as destination for the filter result,
which is usually routed to the nitpicker GUI server. It provides an
"Event" service to which any number of event sources can connect.
The configuration of the filter chain remains almost the same. Only the
declaration of the <input> nodes is no longer needed. Instead, the
configuration must specify <policy> nodes, which define the mapping of
"Event" clients (event sources) to the inputs used in the filter chain.
The patch adjusts all uses of the nitpicker GUI server accordingly such
that the event filter reports events to nitpicker's event service
instead of having nitpicker request an "Input" session. This dissolves
the dependency of nitpicker from input drivers.
Issue #3827
This is an intermediate helper component for the transition of input
servers into event clients. It works analogously to the
input_event_bridge but it connects servers instead of clients.
In particular, it can act as glue between a traditional input driver
that provides an input service and the event filter that provides an
event service. Thanks to this component, each driver can be migrated to
the event-client interface individually.
Issue #3827
This patch replaces the use of the "Framebuffer" session interface by
the new "Capture" session interface in all framebuffer drivers. Thanks
to this change, those drivers have become mere clients of the nitpicker
GUI server now, and are no longer critical for the liveliness of the GUI
server.
The patch touches the following areas:
- The actual driver components. The new versions of all drivers have
been tested on the respective hardware. Generally, the drivers
have become simpler.
- The drivers_interactive packages for various boards. The drivers
subsystem no longer provides a "Framebuffer" service but needs a
valid route to the "Capture" service provided by nitpicker.
- The driver manager of Sculpt OS.
- This patch changes the role of the test-framebuffer component from a
framebuffer client to a capture server so that drivers (capture clients)
can be directly connected to the test component without the nitpicker
server.
- Framebuffer driver no longer support the unbuffered mode.
- The fb_bench.run script is no longer very meaningful because it
interplays solely with nitpicker, not with the driver directly.
- All run scripts for graphical scenarios and the related depot
archives got adapted to the change.
Fixes#3813
