The new 'displays' report contains information about the used
framebuffer backend. It is issued when nitpicker has successfully passed
all initialization, in particular the connection to the framebuffer
driver. Hence, it can be taken as an indicator of whether the framebuffer
is available or not (e.g., caused by a faulty driver).
* Enable USB input
* Get rid of variables that adapted runscript to other platforms than x86_64
hardware with nova and instead restrict the run script to this platform
* Use a dynamic config for routers
* Switch label of the uplink of router 1 so it connects to Wifi and NIC driver
alternately
* Let uplink domain tag appear and dissapear
Issue #2815
Automated test for switching the NIC-router uplink between NIC driver and Wifi
driver with DHCP and different subnets. Tests also removal and later re-
insertion of the uplink domain tag.
Issue #2815
When re-configuring the NIC router, determine for each domain if at least one
interface stays with the domain. If a domain fullfills this and has a
dynamic IP config (received via a DHCP client), keep the IP config.
To achieve this, the following changes have been made to the existing NIC
router code:
* Split-up Interface::handle_config into three steps:
1) Determine for each interface if its domain can keep its IP config or
or if it has to mark it invalid. This must be done before (re-)attaching
any interface because during "attach" several decisions are made based on
the validity of the IP config of corresponding the domain.
(E.g. whether to participate in sending DHCP DISCOVERs {IP config
invalid} or whether to participate in sending pending ARP REQUESTs
{IP config valid} ).
2) Detach, attach, or re-attach each interface according to the
configuration. This must be done before re-considering the temporary
state objects of each interface because the latter might have effects
on the interfaces of remote domains which must then be in place already.
3) Re-consider temporary state objects of each interface. (E.g. transport
layer connection states)
* Re-work IP-config setter in a way that it works as follows:
1) If the old IP config is valid, let all local interfaces as well as remote
interfaces that depend on the IP config of the domain detach from the old
IP config.
2) Overwrite with new IP config
3) If the new IP config is valid, let all local interfaces as well as remote
interfaces that depend on the IP config of the domain attach to the new
IP config.
Issue #2815
The new attribute config.domain.label has effect only at the uplink
domain-tag. It determines which label the NIC router shall use when
requesting the NIC session for the uplink domain. If value of this
attribute changes at the uplink domain-tag, the NIC router closes and
re-requests the NIC session of the uplink with the new label.
Issue #2815
This tests the case that behind a NIC router domain there are not only
directly connected clients of the subnet but also Layer 2 indirections like
a switch or a bridge which might be interesting for example for testing the
NIC routers DHCP server implementation.
Fixes#2837
Set DHCP-DISCOVER retry timeout and DHCP-REQUEST retry timeout from 10
seconds to 2 seconds. This prevents problems with tests where the NIC
driver comes up slowly and the first packets of the DHCP client get
dropped.
Issue #2837
The Ethernet destination MAC address of a DHCP reply is not the same as the
DHCP client MAC address. The DHCP server of the NIC router did not take care
of this by now.
Issue #2837
Properly initialize and reset the _owner member, otherwise
correlating the unlock operation with the respective read/write
lock does not work.
Move locking the _nbr_mutex in the unlock operation after the
owner check. Otherwise, a reader holding that mutex and waiting
for the write lock would deadlock a writer trying to unlock the
_global_mutex.
Ref. Componolit/componolit#86
Ref. #2656Fixes#2832
When an environment session is provided by a async service such as a
sibling component, the session metadata must be preserved until end of
the lifetime of the session at the server has been acknowledged by the
server. Since the session meta data of env sessions are always part of
the 'Child' object, the destruction of this object must be deferred
until this point.
Merge the 'Packet_handle' into the 'Rom_root' and use an Id_space to
match File_system handles to session objects rather than a list. This
avoids the need to override 'Root_component::_destroy_session'.
Fix#2833
When exhausted of RAM quota while starting children, init used to throw
an uncaught 'Out_of_ram' exception as this condition was considered
fatal. However, this behavior is undesired when init is used in a highly
dynamic yet long-running fashion like sculpt's runtime subsystem. This
change keeps init running despite the error condition, giving the user
the chance to relieve the resource pressure.
If ACPI IRQs are received but no changes to the watched state for a specified
count can be observed, than generate nonetheless a Genode report.
Issue #2816
The 'View_stack::draw_rec' method limited the redraw to parts of the
view that were explicitly marked as dirty. This does not produce the
desired result when stacking multiple transparent views. Here, the
background views must be drawn regardless of whether they are marked as
dirty or not.
