For Windows guests, it's crucial to configure the paravirtualization
provider in .vbox6 like follows. Otherwise, the TSC calibration fails
(issue #4726) and the CPU frequency (in task manager) is bogus.
<Paravirt provider="HyperV"/>
Fixes#4726
Check 'pv == nullptr' in 'ShClSvcImplWriteData' and return
VERR_INVALID_POINTER if invalid (as is done, for example, in the X11
implementation).
issue #4666
This networking scenario is useful for analysing and optimizing the
interplay of the VFS, libc, TCP/IP, and the NIC router. It downloads a
file via fetchurl from lighttpd, both of which are hosted on a virtual
network.
Issue #4697
200 TSC ticks for max measurement duration can get too small on platforms
with high TSC frequencies (e.g., >3GHz) and low CPU frequencies often
caused by HWP configurations. Therefore, we express the measurement
duration in NS (not ticks) and calculate max duration ticks using the
TSC frequency. This way the max duration becomes independent of the TSC
frequency.
fixes#4672
If `select_from_ports` is evaluated lazily, we might miss a port during
the dependency check. A way to prevent this is to use the `:=` operator.
Fixesgenodelabs/genode#4618
During initialization _handle_link_state may be called concurrently from EMT and
"nic_ep" (signal handler). Therefore, sent signal to "nic_ep" instead of calling
_handle_link_state from EMT thread.
issue #4632
With the increase of MAXPHYS, the rump kernel requests a contiguous
allocation of 2101248 bytes, which exceeds the allocator's block size of
2 MiB.
Error: backend allocator: Unable to allocate memory (size: 2101248 align: 12)
The patch avoids this corner case by increasing the allocator's block
size to 4 MiB.
Fixes#4613
The `with_sub_node` method is renamed to `with_optional_sub_node` to
better reflect that the non-existence of a sub node with the desired type is
ignored.
At the same time, the new `with_sub_node` now takes a second functor that is
called when no sub node of the desired type exists.
genodelabs/genode#4600
Instead of having a generic "virt_qemu" board use "virt_qemu_<arch>" in
order to have a clean distinction between boards. Current supported
boards are "virt_qemu_arm_v7a", "virt_qemu_arm_v8a", and
"virt_qemu_riscv".
issue #4034
Since "Consolidate USB test run-scripts" usb_hid_raw.run depends on
depot archives. Therefore, '--depot-dir' and '--depot-user' must be
passed to the nested run tool to cover cases that customize the depot
(e.g., our nightly CI).
Issue #4511
to work again. The drivers interactive package does not provide a Platform
service anymore, so remove the audio driver. A lot more mesa related libraries
are required now.
Deploying an overly large meta-pkg in Sculpt leads to an
'Xml_generator::Buffer_exceeded' exception. Using the expanding
reporter solves this problem.
Fixes#4493.
The file listed only enabled="false" in the audio adapter tag. However,
setting only this option to true isn't sufficient for guest audio to work.
One has to set also enabledIn respectively enabledOut in the same tag. The
new default vbox6 file reflects this.
Fixes#4476
The issue came apparent with Windows Guests and USB passthrough of
smart-card readers. If the VM is powered off, PDMR3Term cleans up all
devices incl. (first) acpi and (later) devxhci. The latter used a
dangling reference to ACPI structs in a indirect call to
apicIsLogicalDest() from xhciR3Destruct().
VMMR3_INT_DECL(int) PDMR3Term(PVM pVM)
virtualbox6/src/VBox/VMM/VMMR3/PDM.cpp:817
"apic" (pDevIns->pReg->szName)
static void apicR3TermState(PVM pVM)
virtualbox6/src/VBox/VMM/VMMR3/APIC.cpp:1235
"qemu-xhci" (pDevIns->pReg->szName)
static DECLCALLBACK(int) xhciR3Destruct(PPDMDEVINS pDevIns)
repos/ports/src/virtualbox6/devxhci.cc:431
void usb_detach(USBPort *port)
<qemu-usb>/src/lib/qemu/hw/usb/core.c:70
static void xhci_port_notify(XHCIPort *port, uint32_t bits)
<qemu-usb>/src/lib/qemu/hw/usb/hcd-xhci.c:2592
static DECLCALLBACK(void) pciSetIrq(PPDMDEVINS pDevIns, PPDMPCIDEV pPciDev, int iIrq, int iLevel, uint32_t uTagSrc)
virtualbox6/src/VBox/Devices/Bus/DevPCI.cpp:398
static bool apicIsLogicalDest(PVMCPUCC pVCpu, uint32_t fDest)
virtualbox6/src/VBox/VMM/VMMAll/APICAll.cpp:797
The fix removes our Qemu library reset from xhciR3Destruct() and
registers xhciR3Reset() as PowerOff hook.
Thanks to Raphael for the thorough investigation.
This patch declares that the pseudo target virtualbox6/services/ does
not produce any build artifact. This allows the adding of virtualbox6
to Sculpt's 'build:' list.
* Switch from the legacy usb_host driver to the new PC version
in recipes and automated tests
* Update documentation snippets
* Remove outdated, unused usb_rndis run-script
Fixgenodelabs/genode#4416
* use netperf omnitest output selectors to acquire more metrics
* remove packet_size argument that was not interpreted by netperf
genodelabs/genode#4427
To make room for the re-newed usb_host_drv basing on Linux 5.14 and
the re-newed lx_kit/lx_emul we have to move the depot recipe and
consistently name the old drivers with a legacy_ prefix.
Ref genodelabs/genode#4416
This patch enhances the PD-session interface with the support needed for
user-level device drivers performing DMA. Both RPC functions are
intended for the direct use by the platform driver only. If invoked for
PDs that lack the managing-system role, the operations have no effect.
The 'dma_addr()' RPC function allows the platform driver to request the
DMA address of a given RAM dataspace. It is meant to replace the
'Dataspace::phys_addr' RPC function.
The 'attach_dma' RPC function adds the given dataspace to the device
PD's I/O page table. It replaces the former heuristics of marking DMA
buffers as uncached RAM on x86.
With this patch, the UNCACHED attribute of RAM dataspaces is no longer
used to distinguish DMA buffers from regular RAM dataspaces.
Issue #2243
This patch replaces the direct use of a file-system session via the
'file_system/util.h' helpers by the VFS using the os/vfs.h API. This
makes the component more flexible while removing the dependence from
read and write utilities of file_system/util.h, which happen to rely on
the (now removed) blocking packet-stream semantics.
Issue #4390
Implement GLX and X functionality through Mesa's EGL interface. This
requires multiple OpenGL contexts and in turn GEM context support in
libdrm/iris, as implemented in libdrm and intel_gpu_drv.
Update recipes and machine.vbox6 files accordingly,
issue #4380
To actually receive audio input in a particular VM, it also
needs to be enabled in the vbox file:
<AudioAdapter controller="HDA" driver="OSS" enabled="true"
enabledOut="true" enabledIn="true"/>
Fixes#4377
This change keeps the version-controlled 'pubkey' and 'download' files
separate from files generated via depot/create or downloaded via
depot/download. So one can remove the entire depot/ directory without
interfering with git.
Furthermore, depot keys can now be hosted in supplemental repositories
independent from Genode's main repository.
Fixes#4364
This patch changes the 'Allocator' interface to the use of 'Attempt'
return values instead of using exceptions for propagating errors.
To largely uphold compatibility with components using the original
exception-based interface - in particluar use cases where an 'Allocator'
is passed to the 'new' operator - the traditional 'alloc' is still
supported. But it existes merely as a wrapper around the new
'try_alloc'.
Issue #4324
The former use of Pthread conditionals did not cover the corner case of
early wakeups just before halting the CPU. These wakeups were simply
lost which resulted in sporadic halts of about 500 ms (the maximum timeout
of all halts in VirtualBox). RTSEMEVENTMULTI preserves early wakeups
and effectively prevents the CPU from halting.
Additionally, we now wakeup the target CPU on VMMR0_DO_GVMM_SCHED_POLL
and, thus, mimic the behavior of the original implementation slightly
better,
Slightly related to #4313
Explicitly, adapt to current framebuffer/window size after
initialization finished. This ensures the use of the correct framebuffer
dimensions in scenarios without a window manager.
Thanks to Raphael for the patch.
This patch replaces the 'Ram_allocator::alloc' RPC function by a
'try_alloc' function, which reflects errors as 'Attempt' return value
instead of an exception.
Issue #4322
Issue #3612
The commit avoids the race between checking for the NEM state and the decision
to notify (poke) the NEM backend (nem.cc).
- ever notify about POKE flag for remote vCPU
- check synchronized for NEM state
- store recheck flag and apply on next switch_to_hw
Issue #4313
