Commit Graph

166 Commits

Author SHA1 Message Date
Josef Söntgen
78e8e04b88 tool/run/README: fix wrong examples
Fixes #1392.
2015-02-16 13:40:34 +01:00
Christian Helmuth
e479b9e8e8 ports: also hash patches with absolute path names
Fixes #1305
2015-01-27 12:17:53 +01:00
Josef Söntgen
026b5a66c9 autopilot: get settings via RUN_OPT_AUTOPILOT
If the variable RUN_OPT_AUTOPILOT is set the autopilot will override
the default RUN_OPT settings provided in build.conf.

Related to #1355.
2015-01-26 12:28:41 +01:00
Josef Söntgen
55bf0bb294 run: add power_on/softreset
The softreset module resets the target system by triggering a software
reset.

Fixes #1355.
2015-01-26 12:28:41 +01:00
Josef Söntgen
e3c37f43a0 build.mk: remove RUN_ENV usage 2015-01-26 12:28:41 +01:00
Josef Söntgen
ce24547eea create_builddir: add default RUN_OPT configuration 2015-01-26 12:28:40 +01:00
Josef Söntgen
c706b1c0a7 run: modularize run tool 2015-01-26 12:28:40 +01:00
Emery Hemingway
e4ac1f99ed tool/ports: run unzip with UNZIP_OPT
The patch supports both, a download-specific UNZIP_OPT(download) and a
general UNZIP_OPT that can be defined across downloads.
UNZIP_OPT(download) overrides UNZIP_OPT.

Note, the `--strip-components=1` argument is not required for unzip.

Issue #1357
2015-01-20 11:23:52 +01:00
Stefan Kalkowski
df8bdaaf79 run: increase JTAG load timeout (Ref #1366) 2015-01-20 11:23:50 +01:00
Christian Helmuth
f99ca9e372 Tools for convenient handling of port contrib dirs
tool/ports/shortcut

  create symbolic link from 'contrib/<port-name>-<hash>' to
  contrib/<port-name>

tool/ports/current

  print current contrib directory of port

Fixes #1345.
2015-01-20 11:23:50 +01:00
Stefan Kalkowski
901bff813d imx31: remove platform completely (fix #1360) 2015-01-12 14:24:15 +01:00
Martin Stein
9a4a0448be hw vea9x4: remove trustzone support
When building Genode for VEA9X4 as micro-hypervisor protected by the ARM
TrustZone hardware we ran into limitations regarding our basic daily
testing routines. The most significant is that, when speaking about RAM
partitioning, the only available options are to configure the whole SRAM
to be secure and the whole DDR-RAM to be non-secure or vice versa. The
SRAM however provides only 32 MB which isn't enough for both a
representative non-secure guest OS or a secure Genode that is still
capable of passing our basic tests. This initiated our decision to
remove the VEA9X4 TrustZone-support.

Fixes #1351
2015-01-08 13:28:42 +01:00
Christian Helmuth
11a513ac63 prepare_port: disable certificate checking in wget
Some downloads are available via HTTPS only, but wget < 3.14 does not
support server-name identification, which is used by some sites. So, we
disable certificate checking in wget and check the validity of the
download via SIG or SHA.

Fixes #1334.
2015-01-06 12:39:11 +01:00
Christian Helmuth
6344ab94b2 run: use predefined name for wsman script
"file tempfile" is not available in tcl versions below 8.6, which are
still wide spread, for example, in Ubuntu 12.04.5 LTS.

Fixes #1328.
2014-12-19 13:58:48 +01:00
Stefan Kalkowski
3367fd27e4 run: avoid buffering of output for expect
Due to commit "run: relax IP power plug recognition + serial EOF",
when piping the serial command through 'tr', some characters might
get buffered, thereby preventing some run scripts to finish correctly.
This commit removes the 'tr' hack. Instead, to circumvent the 'expect'
problem, which kills under special conditions spawned childs used to
obtain serial line content, whenever EOF of the serial command is
recognized during the boot phase, the child process gets re-spawned.
2014-12-08 13:53:17 +01:00
Stefan Kalkowski
726c32e5f6 run: relax IP power plug recognition + serial EOF
* To communicate with IP power plug devices from Koukaam, to remote
  control power supply of test boards, don't parse minor versions, but
  support different IP power plugs
* TCL's expect may report an EOF when reading from the spawned serial
  terminal, especially when using 'socat' to stream serial over TCP/IP,
  although the spawned child is still running and delivering content.
  This problem is clearly not dependent on the characters send, but
  possibly due to strange pipe signals. When piping the serial output
  through 'tr' the problem vanishs.
2014-12-03 11:41:13 +01:00
Christian Helmuth
1a718a7770 prepare_port: log download errors explicitly 2014-11-20 17:06:41 +01:00
Christian Prochaska
2583aa2ab4 tool_chain: update GCC to version 4.7.4
Fixes #1051.
2014-11-20 16:39:16 +01:00
Christian Helmuth
6e166d01bb autopilot: detect missing run script with timestamps 2014-10-21 11:05:15 +02:00
Christian Prochaska
1e424a6fd2 run: mark ext2 partition as bootable
When building for the 'disk' run target, the ext2 partition needs to be
marked as bootable to be booted from on some hardware.

Fixes #1270
2014-10-10 13:02:46 +02:00
Christian Prochaska
c41a102bc4 Add 'check_tool' function to new ports mechanism
Fixes #1254.
2014-10-10 13:02:30 +02:00
Alexander Boettcher
cc2f173ca3 run: support Intel AMT wsman protocol
The older SOAP EOI protocol is not supported with AMT version 9+. By default
the wsman tool will be used if installed.

RUN_OPT examples to enforce amtool or wsman:

--target amt --amt-tool wsman
--target amt --amt-tool amttool

Fixes #1251
2014-09-11 10:23:38 +02:00
Josef Söntgen
4c017900c8 tools: strip rumpkernel based tools
Until now, the rumpkernel based tools were installed with all symbols
included. This accounts for about 200MiB used space on 64Bit system.
Stripping the binaries prior to installation brings the space
requirements down to 20MiB.

Fixes #1245.
2014-08-28 12:35:56 +02:00
Josef Söntgen
416c6579d4 tools: fix clean rule in tool_chain_rump
The clean rule is used to delete already built binaries as well as to
clean-up any left-overs from previous build attempts. If there was
no previous attempt just return true to prevent make from complaining.

Fixes #1245.
2014-08-28 12:35:55 +02:00
Christian Helmuth
dc2961338d Bootable GRUB2 disk image with ext2 partition
This provides bootable disk images for x86 platforms via

! RUN_OPT="--target disk"

The resulting disk image contains one ext2 partition with binaries from
the GRUB2 boot loader and the run scenario. The default disk size fits
all binaries, but is configurable via

! --disk-size <size in MiB>

in RUN_OPT.

The feature depends on an grub2-head.img, which is part of the commit,
but may also be generated by executing tool/create_grub2. The script
generates a disk image prepared for one partition, which contains files
for GRUB2. All image preparation steps that need superuser privileges
are conducted by this script.

The final step of writing the entire image to a disk must be executed
later by

  sudo dd if=<image file> of=<device> bs=8M conv=fsync

Fixes #1203.
2014-08-18 13:25:21 +02:00
Christian Helmuth
f442e64eaf prepare_port: log target when extracting archives
Fixes #1224.
2014-08-15 10:19:49 +02:00
Norman Feske
37248560d1 tool chain: disable -Werror for building GDB
Thanks to @duralog for reporting the issue!

Fixes #1214
2014-07-24 10:18:08 +02:00
Martin Stein
6cb9559feb hw: core as library
The build config for core is now provided through libraries to enable
implicit config composition through specifiers and thereby avoid
consideration of inappropriate targets.

fix #1199
2014-07-24 10:18:06 +02:00
Stefan Kalkowski
b07b6666d6 run: wait some time before loading images via JTAG
When powering up the device it sometimes needs some seconds before the
bootloader prepared the board to use JTAG uploading.
2014-07-09 16:26:04 +02:00
Stefan Kalkowski
3d68125b5e create_builddir: add hw_imx53 (TrustZone) target
Until now, the HW platform support for the TrustZone features of the
i.MX53 boards could only be used, when adding a "trustzone" SPEC variable
manually. This commit adds a create_builddir target for HW i.MX53 with
TrustZone features enabled, fo convenience reasons.
2014-07-09 16:26:04 +02:00
Christian Helmuth
24941ffaeb run: check XML syntax of generated config files
Fixes #1005.
2014-07-09 16:26:04 +02:00
Christian Helmuth
2c8f814c66 autopilot: provide time information
- Log elapsed time per test in summary
- Command-line switch `--time-stamp` prefixes log output lines with
  current time stamp (requires ts utility from Debian package _moreutils_)

Fixes #1156.
2014-06-27 14:25:09 +02:00
Stefan Kalkowski
5385ada7a4 run-tool: enable image loading via openocd
By adding: "--target jtag \
            --jtag-debugger <debugger configuration> \
            --jtag-board <board configuration>" to the RUN_OPTs
this commits enables the run-tool to load and execute an ELF image
via JTAG to the target platform.

Fixes #1191
2014-06-26 12:04:53 +02:00
Stefan Kalkowski
b93a58066f trustzone: automate run script for nightly tests
Ref #1182
2014-06-26 10:57:27 +02:00
Alexander Boettcher
963551877f netperf: wait for output of all spawned processes 2014-06-26 10:57:25 +02:00
Alexander Boettcher
5922617eab vbox: add test for shared folders
Issue #1176
2014-06-26 10:57:24 +02:00
Norman Feske
6d3a41a95c tool: Sort patches when generating port hashes
Issue #1082
2014-06-02 11:31:50 +02:00
Norman Feske
615830e107 Enable hash checks for ports mechanism 2014-05-27 13:45:03 +02:00
Norman Feske
acf00c29c3 Add 'update_hash' and 'list' to tool/ports
Issue #1082
2014-05-27 13:45:03 +02:00
Christian Prochaska
b28a551538 run: use 'upvar' instead of 'global'
Using 'upvar' instead of 'global' in the 'append_if' and 'lappend_if'
functions makes it possible to use these functions with local variables
of the calling function.

Fixes #1137.
2014-05-27 11:14:45 +02:00
Josef Söntgen
aaf0454956 tool: wrapper script for rumpkernel tools
The rumpkernel based tools are intended to be used by executing
'tool/rump'. Since it covers the most common use cases for these
tools, this script is comparatively extensive, hence giving a short
tutorial seems reasonable:

* Format a disk image with Ext2:

To format a disk image with the Ext2 file system, first prepare the
actual image by executing dd:

! dd if=/dev/zero of=/path/to/disk_image bs=1M count=128

Second, use 'tool/rump' to format the disk image:

! rump -f -F ext2fs /path/to/disk_image

Afterwards the just created file system may be populated with the
content of another directory by executing

! rump -F ext2fs -p /path/to/another_dir /path/to/disk_image

The content of the file system image can be listed by executing

! rump -F ext2fs -l /path/to/disk_image

* Create a encrypted disk image:

Creating a cryptographic disk image based on cgd(4) is done by
executing the following command:
! rump -c /path/to/disk_image

This will generate a key that may be used to decrypt the image
later on. Since this command will _only_ generate a key and NOT
initialize the disk image, it is highly advised to prepare the disk
image by using '/dev/urandom' instead of '/dev/zero' (only new blocks
that will be written to the disk image are encrypted). In addition
while generating the key a temporary configuration file will be
created. Although this file has proper permissions, it may leak the
generated key if it is created on persistent storage. To specify a more
secure directory the '-t' option should be used:

! rump -c -t /path/to/secure/directory /path/to/disk_image

Decrypting the disk image requires the key generated in the previous
step:

! rump -c -k <key> /path/to/disk_image

For now this key has to specified as command line argument. This is
an issue if the shell, which is used, is maintaing a history of
executed commands.

For completness sake let us put all examples together by creating a
encrypted Ext2 image that will contain all files of Genode's _demo_
scenario:

! dd if=/dev/urandom of=/tmp/demo.img bs=1M count=16
! $(GENODE_DIR)/tool/rump -c -t /ramfs -F ext2fs /tmp/demo.img > \
!         /ramfs/key # key is printed out to stdout
! $(GENODE_DIR)/tool/rump -c -t /ramfs -F ext2fs -k <key> \
!         -p $(BUILD_DIR)/var/run/demo /tmp/demo.img

To check if the image was populated succesfully, execute the
following:

! $(GENODE_DIR)/tool/rump -c -t /ramfs -F ext2fs -k <key> -l \
!         /tmp/demo.img
2014-05-27 11:14:45 +02:00
Josef Söntgen
a9e95e24fe tool: makefile for building rumpkernel tools
The rumpkernel tools are used within the Genode OS Framework tool chain
for preparing and populating disk images as well as creating cgd(4)
based cryptographic disk devices.

Execute 'tool/tool_chain_rump build' to build the tools and afterwards
'tool/tool_chain_rump install' to install the binaries. The default
install location is _/usr/local/genode-rump_.
2014-05-27 11:14:45 +02:00
Norman Feske
05a460c11f Temporarily disable hash checks
...until the transition to the new ports management is complete.
2014-05-27 11:14:44 +02:00
Norman Feske
85a2ebc1c4 libports: migrate to new ports mechanism
Issue #1082
2014-05-27 11:14:42 +02:00
Norman Feske
de65c3f7cc tool/prepare.mk: Switch directories silently 2014-05-27 11:14:42 +02:00
Norman Feske
3de1423a6a Build-system support for ported 3rd-party code
The new 'select_from_ports' function allows a target description file to
query the path to an installed port. All ports are stored in a central
location specified as CONTRIB_DIR. By default, CONTRIB_DIR is defined
as '<genode-dir>/contrib'. Ports of 3rd-party source code are managed
using the tools at '<genode-dir>/tool/ports/'.

Issue #1082
2014-05-27 11:14:42 +02:00
Norman Feske
a128b40f03 Tool for preparing a single 3rd-party port
Issue #1082
2014-05-27 11:14:42 +02:00
Norman Feske
ba291bcc57 build system: Back out on error at libdep stage 2014-05-27 11:14:41 +02:00
Christian Prochaska
f1aa137c9d tool_chain: fix GDB build with makeinfo 5
Issue #1051.
2014-05-14 16:08:01 +02:00
Christian Prochaska
776d7f947f tool_chain: fix GCC build with makeinfo 5
Issue #1051.
2014-05-14 16:08:01 +02:00