Close the stdin, stdout, and stderr I/O channels at child exit. This
serves to flush buffers at the I/O resources which might not be written
otherwise.
Ref #2919
This patch reintroduces the LwIP stack to libc as a VFS plugin
implementing the socket_fs interface. Rather than use LwIP's socket
emulation layer this plugin interfaces directly to LwIP raw API and is
single threaded.
The internal TCP parameters of the stack are untuned.
Fix#2050Fix#2335
A timer should set itslef not pending before calling the timout handler.
This is important for timeout handler that program the timeout again.
issue #2910
Calling 'handle_io_response()' in a regular VFS function (in contrast to a
post-signal hook) can cause problems if the caller of the VFS function holds
a lock which prevents the io response handler from returning.
With this commit, the user of the VFS becomes responsible for unblocking
threads which might be blocking after a failed 'queue_read()', 'queue_sync()'
or 'write()' call.
Fixes#2896
This patch removes the detection of statically linked executables from
the base framework. It thereby fixes the corner cases encountered with
Sculpt when obtaining the binaries of the runtime from the depot_rom
service that is hosted within the runtime.
Statically linked binaries and hybrid Linux/Genode (lx_hybrid) binaries
can still be started by relabeling the ROM-session route of "ld.lib.so"
to the binary name, pretending that the binary is the dynamic linker.
This can be achieved via init's label rewriting mechanism:
<route>
<service name="ROM" unscoped_label="ld.lib.so">
<parent label="test-platform"/> </service>
</route>
However, as this is quite cryptic and would need to be applied for all
lx_hybrid components, the patch adds a shortcut to init's configuration.
One can simply add the 'ld="no"' attribute to the <start> node of the
corresponding component:
<start name="test-platform" ld="no"/>
Fixes#2866
This commit contains a patch of bash's built-in default escape sequences
to match the 'screen' terminal as used by Genode's terminal component.
Fixes#2705
Also remove 'requires_installation_of', while also checking sbin
directories in 'have_installed'. The run scripts have been adjusted
accordingly.
Fixes#2853
The libc will now use the file given by the 'nameserver_file' attribute
to get the DNS nameserver address instead of reading '/etc/resolv.conf'.
It defaults to '/socket/nameserver' which is the common location when
using the lxip VFS plugin. As a constraint the libc will read the first
line and expects the nameserver address without any keywords in front of
it.
Fixes#2861.
Introduce the uplink tag:
! <config>
! <uplink label="wifi" domain="uplink">
! <uplink label="wired" domain="wired_bridge">
! <uplink domain="wired_bridge">
! <config/>
For each uplink tag, the NIC router requests a NIC session with the
corresponding label or an empty label if there is no label attribute.
These NIC sessions get attached to the domain that is set in their
uplink tag as soon as the domain appears. This means their lifetime is
not bound to the domain. Uplink NIC sessions can be safely moved from
one domain to another without being closed by reconfiguring the
corresponding domain attribute.
Attention: This may render previously valid NIC router configurations
useless. A domain named "uplink" doesn't automatically request a NIC
session anymore. To fix these configurations, just add
! <uplink domain="uplink"/>
or
! <uplink label="[LABEL]" domain="uplink"/>
as direct subtag of the <config> tag.
Issue #2840
In contrast to most information of init's state reports, which can be
monitored at a relatively low rate (like 2 seconds in Sculpt's runtime),
resource requests call for an immediate response by the consumer of the
report. Otherwise the requesting child stays unnecessarily blocked until
the next rate-limited state report is due. This patch adds a fast lane
for such low-latency state updates to init.
* Enable USB input
* Get rid of variables that adapted runscript to other platforms than x86_64
hardware with nova and instead restrict the run script to this platform
* Use a dynamic config for routers
* Switch label of the uplink of router 1 so it connects to Wifi and NIC driver
alternately
* Let uplink domain tag appear and dissapear
Issue #2815
Rename LwIP library in preparation for removal of LwIP libc plugin. The
current LwIP library will be replaced with a new version stripped of its
synchronous socket support. The next version will be incompatible with
the current, so removing 'lwip.lib.so' completely for a period makes it
easy to identify legacy users.
Fix#2797
This commit changes the 'Input::Event' type to be more safe and to
deliver symbolic character information along with press events.
Issue #2761Fixes#2786
By now, rump would query its available RAM quota to determine the
memory limit minus some RAM reserved for Genode meta-data. This
does not work when the VFS rump plugin is used as the available
quota belongs to the VFS server. In this case the memlimit should
be set by specifing the RAM in the plugin's config, e.g.:
! <vfs>
! <rump fs="ext2fs" ram="64M" writeabl="yes"/>
! </vfs>
Fixes#2783.
This patch replaces the terminal's formerly built-in fonts with the new
VFS-based font handling.
To avoid the copying of the terminal's font configuration across run
scripts, this patch adds the new terminal/pkg runtime package, which
includes everything needed for instantiating a terminal: the actual
terminal component, the library dependencies (vfs_ttf, which in turn
depends on the libc), a font (bitstream-vera), and a reasonable default
configuration.
Fixes#2758
This patch make the scenario independent from device drivers, which were
solely needed to display a graphical terminal. The output of the
scenario is now printed via the log_terminal component, which makes the
logging output of nightly tests more useful.
Reduce the size and forward compatibility of VFS file-system
constructors by passing an object holding accessors for 'Genode::Env',
'Genode::Allocator', response handlers, and the root file-system.
Fix#2742
This patch improves the `Text_painter` utility that is commonly used by
native Genode components to render text:
- Support for subpixel positioning
- Generic interface for accessing font data
- Basic UTF-8 support
Since the change decouples the font format from the 'Text_painter' and
changes the API to use the sub-pixel accurate 'Text_painter::Position'
type, all users of the utility require an adaptation.
Fixes#2716
This patch enables the use of the VFS from VFS plugins by passing a
reference of the root directory to the constructors of file-system
instances. Since it changes the signature of 'Vfs::Dir_file_system',
any code that uses the VFS directly requires an adaptation.
Fixes#2701
In case the signature file is corrupt, e.g. it could not be downloaded
successfully, the gnupg code just prints an error message but will not
return the error to the user. So we patch the code to return the error
and check the value in the calling code.
- Use latest Muen version
- Sync VirtualBox Muen subject state
- Drop unneccessary subject IP patch
- Adapt Muen RUN_OPTs
- Update documentation
Note: the GPL 2017 toolchain is now required and as the debug output
format has changed the mulog-subject.py script must be updated on
autopilot instances.
This patch adds hooks for customizing the location of the configure
script within the package, the build target, as well as the install
step. This is useful for packages like tcl that deviate from the
usual layout of source packages.
Issue #2648
The new 'verify' component facilitates the code of GnuPG to verify
detached OpenPGP signatures against public keys.
Since GnuPG depends on libgcrypt and libgpg-error, the patch adds these
libraries to the libports repository.
Fixes#2640
Adds two new netperf tests, netperf_lxip_router and netperf_lwip_router
who test the TCP throughput of the NIC router when routed with a tcp-forward
rule and NAT.
Issue #2624
Until now, if we examined an EPT fault and the corresponding guest
physical memory was not allocated, we forwarded the faulting instruction
to the instruction emulator, which in turn handled the memory allocation
implicitly. This lead to long instruction emulation times on certain
instructions (e.g. 'rep mov' on large memory junks). Therefore, we now
allocate and map the corresponding guest physical memory immediately in
the EPT fault handler and directly return to the guest.
fixes#2645
This is a follow-up commit to "Increase default warning level", which
overrides Genode's new default warning level for targets contained in
higher-level repositories. By explicitly whitelisting all those targets,
we can selectively adjust them to the new strictness over time - by
looking out for 'CC_CXX_WARN_STRICT' in the target description files.
Issue #465
The patch adjust the code of the base, base-<kernel>, and os repository.
To adapt existing components to fix violations of the best practices
suggested by "Effective C++" as reported by the -Weffc++ compiler
argument. The changes follow the patterns outlined below:
* A class with virtual functions can no longer publicly inherit base
classed without a vtable. The inherited object may either be moved
to a member variable, or inherited privately. The latter would be
used for classes that inherit 'List::Element' or 'Avl_node'. In order
to enable the 'List' and 'Avl_tree' to access the meta data, the
'List' must become a friend.
* Instead of adding a virtual destructor to abstract base classes,
we inherit the new 'Interface' class, which contains a virtual
destructor. This way, single-line abstract base classes can stay
as compact as they are now. The 'Interface' utility resides in
base/include/util/interface.h.
* With the new warnings enabled, all member variables must be explicitly
initialized. Basic types may be initialized with '='. All other types
are initialized with braces '{ ... }' or as class initializers. If
basic types and non-basic types appear in a row, it is nice to only
use the brace syntax (also for basic types) and align the braces.
* If a class contains pointers as members, it must now also provide a
copy constructor and assignment operator. In the most cases, one
would make them private, effectively disallowing the objects to be
copied. Unfortunately, this warning cannot be fixed be inheriting
our existing 'Noncopyable' class (the compiler fails to detect that
the inheriting class cannot be copied and still gives the error).
For now, we have to manually add declarations for both the copy
constructor and assignment operator as private class members. Those
declarations should be prepended with a comment like this:
/*
* Noncopyable
*/
Thread(Thread const &);
Thread &operator = (Thread const &);
In the future, we should revisit these places and try to replace
the pointers with references. In the presence of at least one
reference member, the compiler would no longer implicitly generate
a copy constructor. So we could remove the manual declaration.
Issue #465
This patch makes the creation of the libc's timer session depend on
whether or not the 'rtc' attribute of the <libc> configuration is
defined. If not configured, 'clock_gettime' returns 0.
Fixes#2625
The new variable 'INSTALL_TAR_CONTENT' allows one to customize the
content of the generated tar archive instead of including the entire
install directory.
Channels, and therefore contexts, may be shared between children
causing corruption when a child is destroyed while another child still
uses the old context within the channel.
related to #2601
Replace former rtt_sec attribute of the <config> tag by more specific
(and still optional) attributes for timeouts used in the NIC router
(these are also the default values):
<config dhcp_discover_timeout_sec="10"
dhcp_request_timeout_sec="10"
dhcp_offer_timeout_sec="10"
udp_idle_timeout_sec="30"
tcp_idle_timeout_sec="600"
tcp_max_segm_lifetime_sec="30">
Details about the new attributes can be found in the README of the router.
Issue #2590