Instead of returning an invalid device capability when a device
is (not yet) available, e.g. a PCI device is requested before the
PCI bus got parsed accordingly, we check the device capability
within the Platform::Connection utilities, and register temporarily
an Io_signal_handler to wait for changes of the devices ROM, and
try the device aquisition again. Thereby, simple drivers so not have
to take the burden to do so.
To enable this feature for all drivers, we always have to export a
devices ROM, but limit the information about physical resources
(I/O memory addresses, IRQ numbers, I/O port ranges) to clients with
'info=yes' in their policy description.
Fixgenodelabs/genode#4496
By adding a 'report' node to the platform driver's configuration
one can enable either devices or config reports. The devices
report contains all devices and their detailed state, as well as
whether it is already in use or not. The config report contains
one by one the current configuration of the platform driver.
Moreover, this commit adds a README file describing the facilities
of the platform driver.
Fixgenodelabs/genode#4386
If PCI devices happen to miss complete configuration after boot, the
platform driver supports <pci-fixup> nodes for concrete devices
(specified by bus-device-functions tuples). The
<bar> node instructs the platform driver to remap BAR id 0 to address
0x4017002000, which amends the BIOS configuration and is stringently
required for BARs with address 0.
! <pci-fixup bus="0" device="0x15" function="3">
! <bar id="0" address="0x4017002000"/>
! </pci-fixup>
The issue was discovered with Intel LPSS devices in Fujitsu notebooks.
Fixes#4501
To discharge the generic platform driver from certain PCI bus scanning,
and ACPI + kernel specifics, this commit introduces a new component,
which consumes the acpi drivers report and the platform_info from core
to prepare a devices ROM for the platform driver that contains all
PCI devices and its resources.
Fixgenodelabs/genode#4495
USB Attached SCSI devices might expose a bulk-only interface
as fall-back at interface 0 and alternate setting 0. This commit
allows for probing all alternate settings of the active interface
to be able to use such devices.
The configuration was extended so that in case the device interface
is known beforehand the driver can be configured accordingly.
Fixes#4494.
Since the driver relies on all requests being Nvme::MPS_LOG2 aligned
as advertised in its Block::Info the added check will reject any
misaligned requests (using 'gpt_write' led to an IOMMU write fault).
Issue #4486.
To signal that a device gets used and released by a session
introduce claim, release, and release all callbacks in the
USB interface of the C-API.
Ref genodelabs/genode#4483
Before this commit, the block-request handler was implemented as
Io_signal_handler and, additionally, the USB driver called the
block-request handler on request completion directly on I/O level. This
is generally a bad idea because I/O handlers should avoid to have direct
global side effects. In contrast, application logic should be
implemented in way that it consumes atomic state changes after I/O
completed. Now USB I/O completion locally submits a signal to the
block-request Signal_handler.
The Uplink_test used to end in an uncaucht exception about a failed packet
allocation on several x86_32 platforms.
* Destruct and re-construct the corresponding TX packet allocator during a
link-down-up step in the Uplink test. Fixes the exceptions but results in a
never ending test.
* Decouple the link-down-up steps from the handling of packet stream signals
by simply triggering it with a local periodic timeout of 1 sec period.
This prevents that the Uplink_test never finishes because it destructs the
Uplink connection too often.
* The test finishes not before at least 3 link-down-up steps were executed.
* Replace the Allocator_avl's used for the TX packet allocators of the Nic
and Uplink Connection with the better suited Nic::Packet_allocator.
Ref #4419
The service is merely announced but trying to request a session always causes a
Service_denied exception. This helps in scenarios where the client is
won't open a session anyway but expects the service to be available. This is
considered a temporary solution.
Ref #4419
This patch reverts the vfs-watch-handle creation whenever the subsequent
allocation of the VFS server's 'Watch' object fails. This can happen
when the session RAM or cap quota is depleted.
Fixes#4472
'Platform::Device_pd::attach_dma_mem' may lead to insufficient resources
for meta data, which is reflected to the client via 'Out_of_caps' or
'Out_of_ram'. In case the client upgrades its session the quotas need to
be passed to core as done by
'Platform::Device_pd::Expanding_region_map_client::attach'.
issue #4451
Use 'avail_caps' and 'avail_ram' for resource guards because 'used_caps'
and 'used_ram' do not account for resources given to the platform
driver. This lead to incorrect resource accounting by the GPU
multiplexer.
issue #4451
The calculations of packet_size and packet_count in the block_io() did
not consider rounding errors. This resulted in diverging values over
several bisecting operations (/= 2) and wrongly-size packet allocations
as well as memcpy operations.
Related to #2263 (comments about partial block accesses and
_block_io()).
Fixes#4471
The NIC router used to handle each type of packet-stream signal with a distinct
method in the Interface class. However, merging those methods has advantages.
It ensures that sent packets that were already acknowledged by the counter side
are always released before handling received packets. This frees packet stream
memory which facilitates the potential allocation of response packets while
handling received packets. Furthermore, it simplifies the code and reduces the
number of entry points into the router.
This commit also removes the installation of signal handlers at packet streams
for events that are of no interest for the router (TX-ready-to-ack /
RX-ready-to-submit at NIC sessions and RX-ready-to-ack / TX-ready-to-submit at
Uplink sessions).
Fixes#4470
Whenever the nic_router encounters ARP requests on an interface
that does not have a valid IP config it will ignore them. However,
When increasing the verbosity of the component for diagnostic
purposes the resulting 'Bad network protocol' message is misleading.
Issue #4455.
* Test DHCP RENEW by the test client in the unmanaged variant.
* Add event IDs to log output of test client in order to prevent false positive
result in the managed variant.
* Let managed and unmanaged variant have separate string patterns for
'run_genode_until' because they already had different output and it will
differ even more as we don't want to test DHCP RENEW with the managed
variant.
* Delay first test client DHCP in order to fix unexpected sporadic initial IP
config.
* Remove some unnecessary code from the run script
Fixes#4460
The NIC router did update the IP config of a domain on a completed DHCP
REQUEST but not on completed DHCP RENEW or DHCP REBIND. Thus, it didn't adapt
to "real" DHCP servers (not NIC router servers) that got restarted with a
changed configuration by the means of RENEW/REBIND. The commit fixes this.
Note, that testing this is complicated as we don't have the necessary
infrastructure (we cannot simply use the DHCP server of the NIC router as this
would apply a link down/up sequence in order to let the client restart DHCP)
Ref #4460
by using the io_mem RPC of the platform session instead of parsing the
bar resources manually. This commits avoids and breakage on systems where
the Intel graphic cards just uses 64bits with addresses above 4G.
Issue #4450
Our usb_host driver supports UHCI, OHCI, EHCI, and XHCI host
controllers. The USB4 host interface / Thunderbolt is currently not
supported and must therefore not be passed to the USB host driver.
With this fix, the driver no longer aborts on the Tigerlake notebook and
just skips the out-of-region ACPI table. Issue #4452 is not fixed by
this commit, but in this specific case the table is not used anyway.
Check if there are a least 4 caps + 2MB (heap) + possible buffer size
available before any resource allocation. Only account resources that are
actually used.
issue #4451
The former implementation relied on the behaviour of how the old
intel fb driver requested the pci devices. The new lxkit however actually
really want to have all available pci devices.
Issue #4450
If size is zero, the platform goes out of service by:
[init -> platform_drv] Error: Uncaught exception of type 'Genode::Ram_allocator::Denied'
[init -> platform_drv] Warning: abort called - thread: e
Issue #4450
This patch changes the output format of the trace logger to become
better suitable for human consumption. For example, when instrumenting
the VFS server in Sculpt using the GENODE_TRACE_TSC utility, the
trace logger now generates tabular output as follows.
Report 4
PD "init -> runtime -> arch_vbox6 -> vbox -> " ----------------
Thread "vCPU" at (0,0) total:12909024 recent:989229
Thread "vCPU" at (1,0) total:5643234 recent:786437
PD "init -> runtime -> ahci-0.fs" -----------------------------
Thread "ahci-0.fs" at (0,0) total:910497 recent:6335
Thread "ep" at (0,0) total:0 recent:0
71919692932: TSC process_packets: 8005M (4998 calls, last 4932K)
71921558516: TSC process_packets: 8006M (4999 calls, last 1596K)
71922760220: TSC process_packets: 8007M (5000 calls, last 1006K)
71929853586: TSC process_packets: 8009M (5001 calls, last 1840K)
71931315246: TSC process_packets: 8011M (5002 calls, last 1253K)
72127999920: TSC process_packets: 8016M (5003 calls, last 5606K)
72129568198: TSC process_packets: 8018M (5004 calls, last 1345K)
77161908178: TSC process_packets: 8029M (5005 calls, last 11349K)
77643225736: TSC process_packets: 8029M (5006 calls, last 217K)
89422100594: TSC process_packets: 8035M (5007 calls, last 5656K)
89422123632: TSC process_packets: 8035M (5008 calls, last 1342)
Thread "signal handler" at (0,0) total:36329 recent:3001
Thread "signal_proxy" at (0,0) total:51838 recent:13099
Thread "pdaemon" at (0,0) total:97184 recent:332
Thread "vdrain" at (0,0) total:1266 recent:286
Thread "vrele" at (0,0) total:1904 recent:516
PD "init -> runtime -> nic_drv" -------------------------------
Thread "nic_drv" at (0,0) total:34044 recent:897
Thread "signal handler" at (0,0) total:369 recent:142
...
Subjects that belong to the same PD are grouped together. The formerly
optional affinity and activity options have been removed. Those
information are now unconditionally displayed. The trace entries
belonging to a thread appear as slightly indented.
The patch also updates the coding style, avoiding excessively long
lines.
Issue #4448
This patch reduces repetitive log output by omitting inactive trace
subjects from the log output. The information about all subjects can
still be dumped by setting 'verbose="yes"'.
Issue #4448
This patch splits the creation and updating of monitor objects into two
stages. The creation of a monitor object changes the state of the
associated trace subject. The patch ensures that the new state is
captured by the update of the monitor object.
Issue #4448
This patch makes the trace-subject state as reflected to the trace
monitor more accurate.
Until now, a subject could be in UNTRACED or TRACED state. In reality,
however, there exists an intermediate state after the trace monitor
called 'trace' for the subject but before the subject locally activated
the tracing (done when passing a trace point). This intermediate state
was reflected as UNTRACED. Consequently, threads that never pass a trace
point (e.g., just waiting for I/O) would remain to appear as UNTRACED
even after enabling its tracing by the trace monitor. This is confusing.
This patch replaces the former UNTRACED and TRACED states by three
distinct states:
UNATTACHED prior any call of 'trace'
ATTACHED after a trace monitor called 'trace'
but before the tracing is active
TRACE tracing is active
Fixes#4447
The existing assignment of CPU quotas did not anticipate the dynamic
reconfiguration of init. It merely tracked the available CPU quota by
deducing the consumed amount from a global variable but never
replenished the value. This worked for static scenarios but failed in
situations where components are dynamically re-started.
So far this deficiency remained detected because CPU quotas were not
used in highly dynamic systems like Sculpt OS. However, this has
recently changed by commit "sculpt: assign CPU quotas".
The patch improves the accounting by mirroring the existing handling of
RAM and cap quotas. Note that the CPU-quota accounting is still rather
limited. In particular the dynamic rebalancing is not yet supported.
Issue #4445
With the consolidation of the file-system session's signal handlers
implemented by commit "file_system_session: merge ack and submit sigh",
we can now change the VFS server to produce batches of acknowledgements
before explicitly waking up the client. (in contrast to the traditional
'acknowledge_packet', the new 'try_ack_packet' triggers no signal)
Issue #4388
Split the trace buffer into two partitions in order to prevent overwriting
of entries when the consumer is too slow. See file comment in buffer.h.
genodelabs/genode#4434
This commit simplifies the current implementation by overloading the
length field with a padding indicator in addition to the zero-length
head entry. This simplifies the iteration semantics as it eliminates
the need for determining whether a zero-length entries is the actual
head of the buffer or a padding at the buffer end.
genodelabs/genode#4434
* Unifies the declaration of callbacks which manage driver/client
shared dataspaces
* Move the Linux driver-specific callback implementation to the
lx_emul library from the PC's USB host driver
Fixgenodelabs/genode#4439
* The problem occured only on OKL4, seL4, and L4/Fiasco
* The test used to continue submitting packets regardless of how many were in
flight
* This commit limits the in-flight packets at the Uplink/Nic connections to 40
each
Ref #4419
This commit changes the touch-click filter to adhere the following
sequence:
touch (physical)
press (artifically generated)
release (artificially generated)
release_touch (physical)
This order is important because nitpicker's focus handling takes
press/release events into account. If the release-touch event appears
before the release event, nitpicker subsumes the release-touch event
to the sequence that started with the press event, instead of handling
it as a free-standing event.
Issue #4332
When a device got already acquired by a platform session client, do not
return the same capability again, even if the same platform session
client requested it. Therefore, make doubtful behaviour of client components
visible, and do not have to struggle with Platform::Device instances
instantiated multiple times, which care of the lifetime of the device
capability internally.
Fixgenodelabs/genode#4379
* Switch from the legacy usb_host driver to the new PC version
in recipes and automated tests
* Update documentation snippets
* Remove outdated, unused usb_rndis run-script
Fixgenodelabs/genode#4416
Do not only report devices, but the current configuration of the driver too,
as long as the `report` node in the configuration states it.
Ref genodelabs/genode#4416
To stay consistent with the configuration of the legacy usb_host_drv
and other components as well, do not report USB devices by default,
but when the following XML node is set within the component's
configuration:
<report devices="yes"/>
Ref genodelabs/genode#4416
Adds a function to the USB part of the Genode's C API, to enable
usb_host drivers to acknowledge USB request in client's packet buffer
although they are not assigned to an USB device. The requests are
marked with a "no device" error.
This commit fixes a regression originally solved in genodelabs/genode#4149
Ref genodelabs/genode#4416
XML allows attribute values like <node attr="\"/>. The XML parser
wrongly reflects this case as 'Invalid_syntax'. This behavior stems from
the implicit use of the 'end_of_quote' function, which considers the
sequence of '\"' as a quoted '"' rather than the end of a quoted string.
The patch solves this problem by making the 'end_of_quote' part of
the tokenizer's scanner policy.
The patch removes the 'end_of_quote' function from 'util/string.h'
because it is not universal, and to avoid the ambiguity with
'SCANNER_POLICY::end_of_quote'.
Fixes#4431
The Single_file_system now forwards the
`File_io_service::notify_read_ready` method to the
handle as it already did for most of the other methods.
genodelabs/genode#4394
This reference member is not used anywhere in the code. This prompts
clang to complain about it. Eliminate the member and all the plumbing
associated with it to silence the warning.
Issue #4421
Clang likes to complain when lambdas capture parameters without
actually using them. This patch fixes a couple of such problems in VFS
related os module code.
Issue #4421
* Creates sessions to all supported services of the black hole component
* Test-drives the Event and Capture session with dummy input
* Adds the test to the default list of depot_autopilot.run
* Test-driving the Audio_in and Audio_out sessions is still missing and should
be added via a dedicated commit
Ref #4419
This patch makes nitpicker's "clicked" report useful for the detection
of clicks outside of any client. This is needed in situations where the
dialog should close when clicking outside its screen area. In the new
version, a click outside any client results in a report without a
'label' attribute. Furthermore, the report is augmented by the sequence
number of the click, which allows for freshness checks by the consumer of
the report (i.e., sculpt_manager).
Issue #4398
The functionality of the test-block-client, test-block-server, and
test-block-bench components is now covered by the block_tester
application and the vfs_block server.
Issue #4405
This patch eliminates warnings that occurred as side effect of using the
'Session_policy' utility ("Warning: no policy defined for label...").
The new version uses the 'with_matching_policy' function instead, which
has the nice side effect of simplifying the error handling.
This patch enhances the PD-session interface with the support needed for
user-level device drivers performing DMA. Both RPC functions are
intended for the direct use by the platform driver only. If invoked for
PDs that lack the managing-system role, the operations have no effect.
The 'dma_addr()' RPC function allows the platform driver to request the
DMA address of a given RAM dataspace. It is meant to replace the
'Dataspace::phys_addr' RPC function.
The 'attach_dma' RPC function adds the given dataspace to the device
PD's I/O page table. It replaces the former heuristics of marking DMA
buffers as uncached RAM on x86.
With this patch, the UNCACHED attribute of RAM dataspaces is no longer
used to distinguish DMA buffers from regular RAM dataspaces.
Issue #2243
This patch replaces formerly blocking packet-stream operations by
the explicit use of 'wait_and_dispatch_io_signal' for blocking.
It also removes a misleading comment that promised a fire-and-forget
behavior whereas the implementation relied on blocking I/O anyway.
Issue #4390
The VFS block plugin used to depend on the blocking semantics of the
packet stream's 'get_acked_packet'. This patch replaces this dependency
by the use of 'wait_and_dispatch_one_io_signal'. However, in order to
implement this change, the custom instance of a 'Signal_receiver' had to
be removed as well.
To keep this patch as little invasive as possible, it does not touch the
direct use of the block session's packet stream, which should better be
replaced by the 'Block::Connection::Job' API.
Issue #4390
The zynq_nic_drv follows a zero-copy approach and thus uses the packet
buffers as DMA memory. In order to know when the RX DMA memory can be used
for another packet, a custom ack_avail_handler is needed.
Similarly, packets received from the Uplink session are not copied to a
DMA buffer but to directly passed on as DMA memory. For this purpose,
a a custom packet_avail handler is needed.
genodelabs/genode#4384
