Replace the USB session API by one that provides a devices ROM only,
which contains information about all USB devices available for this client,
as well as methods to acquire and release a single device.
The acquisition of an USB device returns the capability to a device session
that includes a packet stream buffer to communicate control transfers
in between the client and the USB host controller driver. Moreover,
additional methods to acquire and release an USB interface can be used.
The acquisition of an USB interface returns the capability to an interface
session that includes a packet stream buffer to communicate either
bulk, interrupt, or isochronous transfers in between the client and the
USB host controller driver.
This commit implements the API changes in behalf of the Genode C API's
USB server and client side. Addtionally, it provides Usb::Device,
Usb::Interface, and Usb::Endpoint utilities that can be used by native
C++ clients to use the new API and hide the sophisticated packet stream API.
The adaptations necessary target the following areas:
* lx_emul layer for USB host and client side
* Linux USB host controller driver port for PC
* Linux USB client ports: usb_hid_drv and usb_net_drv, additionally
reduce the Linux tasks used inside these drivers
* Native usb_block_drv
* black_hole component
* Port of libusb, including smartcard and usb_webcam driver depending on it
* Port of Qemu XHCI model library, including vbox5 & vbox6 depending on it
* Adapt all run-scripts and drivers_interactive recipes to work
with the new policy rules of the USB host controller driver
Fixgenodelabs/genode#5021
The classes Genode::Mmio, Genode::Register_set, Genode::Attached_mmio, and
Platform::Device::Mmio now receive a template parameter 'size_t SIZE'. In each
type that derives from one of these classes, it is now statically checked that
the range of each Genode::Register::Register- and
Genode::Register_set::Register_array-deriving sub-type is within [0..SIZE).
That said, SIZE is the minimum size of the memory region provided to the above
mentioned Mmio classes in order to avoid page faults or memory corruption when
accessing the registers and register arrays declared inside.
Note, that the range end of a register array is not the end of the last item
but the end of integer access that is used for accessing the last bit in the
last item.
The constructors of Genode::Mmio, Genode::Attached_mmio, and
Platform::Device::Mmio now receive an argument 'Byte_range_ptr range' that is
expected to be the range of the backing memory region. In each type that derives
from on of these classes, it is now dynamically checked that 'range.num_bytes
>= SIZE', thereby implementing the above mention protection against page faults
and memory corruption.
The rest of the commit adapts the code throughout the Genode Labs repositories
regarding the changes. Note that for that code inside Core, the commits mostly
uses a simplified approach by constructing MMIO objects with range
[base..base+SIZE) and not with a mapping- or specification-related range size.
This should be fixed in the future.
Furthermore, there are types that derive from an MMIO class but don't declare
any registers or register arrays (especially with Platform::Device::Mmio). In
this case SIZE is set to 0. This way, the parameters must be actively corrected
by someone who later wants to add registers or register arrays, plus the places
can be easily found by grep'ing for Mmio<0>.
Fix#4081
Functions registered with 'module_init' (i.e., '__define_initcalls'),
'OF_DECLARE', and 'DECLARE_PCI_FIXUP_CLASS_FINAL' used to be static
constructors and had be explicitly registered using
'exec_static_constructors' before executing any Linux code.
With this commit we remove the constructor attributes from these
functions and create a global function pointer in the form of
__initptr_<name>_<id>_<counter>_<line number of macro>
'import-lx_emul_common.inc' will collect these '__initptr' symbols after
the compile step and generate a 'lx_emul_register_initcalls' function
that executes the functions pointed to. This step is now automatically
performed in 'lx_emul_start_kernel'. This way a call to
'exec_static_constructors' can be omitted in case there are no other
constructors in place.
issue #5096
The management of Linux page structs is now tied to the life time of DMA
buffers. Thus, page structs are created when a buffer is allocated and
deallocated only when a buffer is freed - not on lx_emul_mem_free()
because DMA buffers are cached. Page struct refcounting was entirely
reworked in lx_emul/shadow/mm/page_alloc.c.
Fixes#4809
The devio API in the Linux kernel promised to be a stable layer for our
USB host controller drivers, but the additional bookkeeping and dynamic
allocations increase CPU overhead in a way that we do not accept further.
Therefore, we go a step back and process DMA transactions directly in and
out of the packet stream from the clients.
Fixgenodelabs/genode#5071
Up to now, when using force_*, all other configured modes of a connector
got overwritten and the force_* got enforced. With the commit,
the connector mode is considered (if below max_*) and the resulting
framebuffer may be larger then the dimension of force_*.
Differences in TAR archive member metadata results in unstable depot
hashes. The following properties have to be fixed: modification time
(incl. time zone), numeric owner and group, permission modes.
Releated to #2842
If all connectors are set to disabled by configuration, the connectors
stayed enabled since the new configuration reveals no preferred or minimal
resolution/mode. Instead, use the last set resolution in order to get to the
disabling code.
This commit extends the Lx_kit initialization function by passing in
a signal handler that is used to perform the normally occurring
scheduler execution and is a follow-up change for the decoupling
scheduler execution commit.
Instead of burying the signal handler in the 'Lx_kit::Scheduler'
object it is provided by the main object where the driver is free
to perform any additional step before or after executing the scheduler.
Issue #4927Fixes#4952
Since the wireless LAN driver is actually a 'Libc::Component' due to
its incorporation of the 'wpa_spplicant' application, we have to
intercept its construction because we have to initialize the Lx_kit
environment before any static ctors are executed. Most Linux initcalls
are implemented as ctors that will be otherwise implicitly executed
before the controll is given to us in 'Libc::Component::construct'.
Issue #4927.
Prior to this commit, whenever an external event occurred, for example
timer or interrupt, the corresponding I/O signal handler was triggered.
This handler unblocked the task waiting for the event and initiated the
immediate execution of all unblocked tasks. Since these tasks may hit
serialization points, e.g. synchronously waiting for packet stream
operations, that require handling of other I/O signals this leads to
nested execution. This, however, is not supported and mixes application
and I/O level signal handling.
The flagging of the scheduling intent is now decoupled from its
execution by using an application level signal handler that is run in
the context of the components main entrypoint. The I/O signal handler
now triggers the scheduling execution by sending a local signal to
the EP.
Since it might be necessary to execute a pending schedule from the EP
directly the scheduler is extended with the 'execute' member function
that performs the check that the scheduler is called from within the
EP and triggers the execution afterwards.
Issue #4927.
On disconnect of displays, e.g. seen with Type-C connectors, the encoder was
not properly disabled due to a missing drm_client_modeset_commit. In order that
the commit succeed, however a fb must be assigned to the modeset. Missing to
do so leads to an -EINVAL by the drm_client_modeset_commit.
Fixes#4948
With these options enabled comparative testing between pc_linux drivers
and bzImages becomes much easier on EFI-only machines. The impact on the
actual Genode drivers is minimal.
This commits enables the R8169 driver and was tested with two
RTL8168h/8111h (10ec:8168 rev 0x15 sub 1462:7a38 / 1d05:109f) and
two equal RTL8125B (10ec:8125 rev 0x5 sub 1458:e000) devices
running Sculpt.
Firmware loading is for now not implemented but specific Linux
commits suggest it could be necessary. However, doing so will be
post-poned until we have gathered more experience with the driver.
Restarting the driver might lead to the following IOMMU error
messages but the device seems to work anyway:
[ 0] IOMMU:0xffffffff817ec040 FR:0x8a00000000002500 FI:0xfffffffdf8d30000 type:0x8 BDF:25:00.0
[ 0] IOMMU:0xffffffff817ec040 FR:0x2000004200002500 FI:0x000c21b0 type:0x2 BDF:25:00.0
[ 0] IOMMU:0xffffffff817ec040 FR:0x2020004200002500 FI:0x000c21a0 type:0x2 BDF:25:00.0
[ 0] IOMMU:0xffffffff817ec040 FR:0x2020004200002500 FI:0x00138000 type:0x2 BDF:25:00.0
[…]
[ 0] IOMMU:0xffffffff817ec040 FR:0x8a00000000002500 FI:0xfffffffdf8d30000 type:0x8 BDF:25:00.0
[ 0] IOMMU:0xffffffff817ec040 FR:0x2020004300002500 FI:0x00124000 type:0x2 BDF:25:00.0
Issue #4921.
