This patch replaces exceptions of the PD session RPC interface with
result types.
The change of the quota-transfer RPC functions required the adaptation
of base/quota_transfer.h and base/child.h.
The 'alloc_signal_source' method has been renamed to 'signal_source'
to avoid an exceedingly long name of the corresponding result type.
The Pd_session::map function takes a 'Virt_range' instead of basic-type
arguments.
The 'Signal_source_capability' alias for 'Capability<Signal_source>' has
been removed.
Issue #5245
Per Affinity::Location a system control cap can be requested. The capability
provides an RPC interface to request and set Cpu_state, as provided by the
former Pd::managing_system(Cpu_state) method. Invocation of those system
control capabilities then *can* (see below) be executed on the desired CPU
as described by Affinity::Location.
The system control cap will be invalid for kernels that don't support
system_control/managing_system functionality at all.
The system control cap will be ever by the same, e.g. ignoring the
Affinity::Location parameter, if the used kernel doesn't support or doesn't
require the feature to execute the system control per CPU.
The commit is a preparation step to add guarded and selective x86 MSR
access per CPU.
Fixes#5009
This patch enhances the PD-session interface with the support needed for
user-level device drivers performing DMA. Both RPC functions are
intended for the direct use by the platform driver only. If invoked for
PDs that lack the managing-system role, the operations have no effect.
The 'dma_addr()' RPC function allows the platform driver to request the
DMA address of a given RAM dataspace. It is meant to replace the
'Dataspace::phys_addr' RPC function.
The 'attach_dma' RPC function adds the given dataspace to the device
PD's I/O page table. It replaces the former heuristics of marking DMA
buffers as uncached RAM on x86.
With this patch, the UNCACHED attribute of RAM dataspaces is no longer
used to distinguish DMA buffers from regular RAM dataspaces.
Issue #2243
This patch replaces the 'Ram_allocator::alloc' RPC function by a
'try_alloc' function, which reflects errors as 'Attempt' return value
instead of an exception.
Issue #4322
Issue #3612
Introduce the managing_system privilege for components like the
platform_driver to allow it to call system management functionality
that is reserved by kernel or special firmware, e.g., ARM Trusted Firmware.
The former RAM resource configuration attribute `constrain_phys`,
which enabled to constrain the region of physical RAM to be used,
gets replaced by the new, broader managing_system configuration
attribute of a `start` node. It gets enforced by the sandbox library.
Ref #3816
This commit removes APIs that were previously marked as deprecated. This
change has the following implications:
- The use of the global 'env()' accessor is not possible anymore.
- Boolean accessor methods are no longer prefixed with 'is_'. E.g.,
instead of 'is_valid()', use 'valid()'.
- The last traces of 'Ram_session' are gone now. The 'Env::ram()'
accessor returns the 'Ram_allocator' interface, which is a subset of
the 'Pd_session' interface.
- All connection constructors need the 'Env' as argument.
- The 'Reporter' constructor needs an 'Env' argument now because the
reporter creates a report connection.
- The old overload 'Child_policy::resolve_session_request' that returned
a 'Service' does not exist anymore.
- The base/printf.h header has been removed, use base/log.h instead.
- The old notion of 'Signal_dispatcher' is gone. Use 'Signal_handler'.
- Transitional headers like os/server.h, cap_session/,
volatile_object.h, os/attached*_dataspace.h, signal_rpc_dispatcher.h
have been removed.
- The distinction between 'Thread_state' and 'Thread_state_base' does
not exist anymore.
- The header cpu_thread/capability.h along with the type definition of
'Cpu_thread_capability' has been removed. Use the type
'Thread_capability' define in cpu_session/cpu_session.h instead.
- Several XML utilities (i.e., at os/include/decorator) could be removed
because their functionality is nowadays covered by util/xml_node.h.
- The 'os/ram_session_guard.h' has been removed.
Use 'Constrained_ram_allocator' provided by base/ram_allocator.h instead.
Issue #1987
The patch adjust the code of the base, base-<kernel>, and os repository.
To adapt existing components to fix violations of the best practices
suggested by "Effective C++" as reported by the -Weffc++ compiler
argument. The changes follow the patterns outlined below:
* A class with virtual functions can no longer publicly inherit base
classed without a vtable. The inherited object may either be moved
to a member variable, or inherited privately. The latter would be
used for classes that inherit 'List::Element' or 'Avl_node'. In order
to enable the 'List' and 'Avl_tree' to access the meta data, the
'List' must become a friend.
* Instead of adding a virtual destructor to abstract base classes,
we inherit the new 'Interface' class, which contains a virtual
destructor. This way, single-line abstract base classes can stay
as compact as they are now. The 'Interface' utility resides in
base/include/util/interface.h.
* With the new warnings enabled, all member variables must be explicitly
initialized. Basic types may be initialized with '='. All other types
are initialized with braces '{ ... }' or as class initializers. If
basic types and non-basic types appear in a row, it is nice to only
use the brace syntax (also for basic types) and align the braces.
* If a class contains pointers as members, it must now also provide a
copy constructor and assignment operator. In the most cases, one
would make them private, effectively disallowing the objects to be
copied. Unfortunately, this warning cannot be fixed be inheriting
our existing 'Noncopyable' class (the compiler fails to detect that
the inheriting class cannot be copied and still gives the error).
For now, we have to manually add declarations for both the copy
constructor and assignment operator as private class members. Those
declarations should be prepended with a comment like this:
/*
* Noncopyable
*/
Thread(Thread const &);
Thread &operator = (Thread const &);
In the future, we should revisit these places and try to replace
the pointers with references. In the presence of at least one
reference member, the compiler would no longer implicitly generate
a copy constructor. So we could remove the manual declaration.
Issue #465
This patch mirrors the accounting and trading scheme that Genode employs
for physical memory to the accounting of capability allocations.
Capability quotas must now be explicitly assigned to subsystems by
specifying a 'caps=<amount>' attribute to init's start nodes.
Analogously to RAM quotas, cap quotas can be traded between clients and
servers as part of the session protocol. The capability budget of each
component is maintained by the component's corresponding PD session at
core.
At the current stage, the accounting is applied to RPC capabilities,
signal-context capabilities, and dataspace capabilities. Capabilities
that are dynamically allocated via core's CPU and TRACE service are not
yet covered. Also, the capabilities allocated by resource multiplexers
outside of core (like nitpicker) must be accounted by the respective
servers, which is not covered yet.
If a component runs out of capabilities, core's PD service prints a
warning to the log. To observe the consumption of capabilities per
component in detail, the PD service is equipped with a diagnostic
mode, which can be enabled via the 'diag' attribute in the target
node of init's routing rules. E.g., the following route enables the
diagnostic mode for the PD session of the "timer" component:
<default-route>
<service name="PD" unscoped_label="timer">
<parent diag="yes"/>
</service>
...
</default-route>
For subsystems based on a sub-init instance, init can be configured
to report the capability-quota information of its subsystems by
adding the attribute 'child_caps="yes"' to init's '<report>'
config node. Init's own capability quota can be reported by adding
the attribute 'init_caps="yes"'.
Fixes#2398
This patch enables warnings if one of the deprecate functions that rely
in the implicit use of the global Genode::env() accessor are called.
For the time being, some places within the base framework continue
to rely on the global function while omitting the warning by calling
'env_deprecated' instead of 'env'.
Issue #1987
This is a redesign of the root and parent interfaces to eliminate
blocking RPC calls.
- New session representation at the parent (base/session_state.h)
- base-internal root proxy mechanism as migration path
- Redesign of base/service.h
- Removes ancient 'Connection::KEEP_OPEN' feature
- Interface change of 'Child', 'Child_policy', 'Slave', 'Slave_policy'
- New 'Slave::Connection'
- Changed child-construction procedure to be compatible with the
non-blocking parent interface and to be easier to use
- The child's initial LOG session, its binary ROM session, and the
linker ROM session have become part of the child's envirenment.
- Session upgrading must now be performed via 'env.upgrade' instead
of performing a sole RPC call the parent. To make RAM upgrades
easier, the 'Connection' provides a new 'upgrade_ram' method.
Issue #2120
Those headers implement a platform-specific mechanism. They are never
used by components directly.
This patch also cleans up a few other remaining platform-specific
artifact such as the Fiasco.OC-specific assert.h.
Issue #1993
This patch supplements each existing connection type with an new
constructor that is meant to replace the original one. The new
one takes a reference to the component's environment as argument and
thereby does not rely on the presence of the globally accessible
'env()' interface.
The original constructors are marked as deprecated. Once we have
completely abolished the use of the global 'env()', we will remove them.
Fixes#1960
This patch replaces the former 'Pd_session::bind_thread' function by a
PD-capability argument of the 'Cpu_session::create_thread' function, and
removes the ancient thread-start protocol via 'Rm_session::add_client' and
'Cpu_session::set_pager'. Threads are now bound to PDs at their creation
time and implicitly paged according to the address space of the PD.
Note the API change:
This patch changes the signature of the 'Child' and 'Process' constructors.
There is a new 'address_space' argument, which represents the region map
representing the child's address space. It is supplied separately to the
PD session capability (which principally can be invoked to obtain the
PD's address space) to allow the population of the address space
without relying on an 'Pd_session::address_space' RPC call.
Furthermore, a new (optional) env_pd argument allows the explicit
overriding of the PD capability handed out to the child as part of its
environment. It can be used to intercept the interaction of the child
with its PD session at core. This is used by Noux.
Issue #1938
This patch integrates three region maps into each PD session to
reduce the session overhead and to simplify the PD creation procedure.
Please refer to the issue cited below for an elaborative discussion.
Note the API change:
With this patch, the semantics of core's RM service have changed. Now,
the service is merely a tool for creating and destroying managed
dataspaces, which are rarely needed. Regular components no longer need a
RM session. For this reason, the corresponding argument for the
'Process' and 'Child' constructors has been removed.
The former interface of the 'Rm_session' is not named 'Region_map'. As a
minor refinement, the 'Fault_type' enum values are now part of the
'Region_map::State' struct.
Issue #1938
The return code of assign_parent remained unused. So this patch
removes it.
The bind_thread function fails only due to platform-specific limitations
such as the exhaustion of ID name spaces, which cannot be sensibly
handled by the PD-session client. If occurred, such conditions used to
be reflected by integer return codes that were used for diagnostic
messages only. The patch removes the return codes and leaves the
diagnostic output to core.
Fixes#1842
This patch integrates the functionality of the former CAP session into
the PD session and unifies the approch of supplementing the generic PD
session with kernel-specific functionality. The latter is achieved by
the new 'Native_pd' interface. The kernel-specific interface can be
obtained via the Pd_session::native_pd accessor function. The
kernel-specific interfaces are named Nova_native_pd, Foc_native_pd, and
Linux_native_pd.
The latter change allowed for to deduplication of the
pd_session_component code among the various base platforms.
To retain API compatibility, we keep the 'Cap_session' and
'Cap_connection' around. But those classes have become mere wrappers
around the PD session interface.
Issue #1841
This patch removes the SIGNAL service from core and moves its
functionality to the PD session. Furthermore, it unifies the PD service
implementation and terminology across the various base platforms.
Issue #1841
For several basic sessions that core provides default ram quota values
exist in the form of enum values. They are used e.g. by init to deduce
session costs. Unfortunately they were not used when actually establishing
the session, which lead to inconsistencies.
Ref #1443
This patch changes the top-level directory layout as a preparatory
step for improving the tools for managing 3rd-party source codes.
The rationale is described in the issue referenced below.
Issue #1082
