Incoming ACK packets for sent data packets may be the only unblocker for
suspended write/send loops. This patch informs VFS users about I/O of
VFS handle on successfully sent packets.
Store errno in pthread objects, return member upon call to '__error()'.
This became necessary in order to make errno thread-safe.
Note, any call to libc code from a non-pthread (beside the first
entrypoint) is not supported.
issue #3568
This is important to issue sync requests for written-to files.
As the closing must be performed by an atexit handler, it happens at a
time _after_ libc plugins are destructed. Consequently an FD allocated
by such a plugin results in a close error, which in turn, does not
destruct the FD. We ultimatedly end up in an infinte loop of
re-attempting the close. For this reason, the patch changes 'close' to
be robust against this special case.
This is generally not a problem because libc plugins are phased out.
However, at present, the libc_noux plugin is still important. With the
changed 'close' in place, there occurred an error message "Error: close:
close not implemented" at the exit of each noux program. This patch
removes the error printing from the libc plugin mechansim to avoid this
noise. The error messages are not important anyway because the
deprecation of the libc plugin interface.
Issue #3578
The getpeername function is provided only by the socket fs.
In the case where the socket fs is not configured, return an appropriate
errno instead probing for a libc plugin (there is none).
Issue #3578
- Close FDs marked with the close-on-execve flag
(needed for 'make', which sets the flag for the pipe-in
FD of forked children)
- Update binary name on execve to use as ROM for subsequent fork
- Enable vfork as an alias for fork (needed by make)
- Purge line buffers for output streams during execve because they
may be allocated at the allocation heap, which does not survive
the execve call.
- Consider short-lived processes that may exit while the parent still
blocks in the fork call.
With these changes, the website generator of genodians.org works without
the need for the Noux runtime.
Issue #3578
fd > FD_SETSIZE cannot use 'select' or 'poll' within our libc.
Therefore, we added a bit allocator in order to allocate fd < FD_SETSIZE
(1024).
fixes#3568
'dlopen' causes the ldso to open ROM connections, right now we only
support single file names for these ROM not paths. Therefore, we extract
the file name from path within libc's 'dlopen'
fixes#3551
Add a new plugin for creating pipes between pairs of VFS handles. It is
intended to replace the libc_pipe plugin, one of the last remaining libc
plugins.
In contrast to the libc_pipe plugin, this plugin defers cross-handle
notification until I/O signal handling rather than block and unblock
readers using a semaphore. This is a performance regression in the case
of multiple threads blocking on a pipe, but shall be an intermediate
mechanism pending renovations within the libc VFS and threading layers.
As a side effect, threads blocked on a pipe might not be resumed until
the main thread suspends and dispatches I/O signals.
The "test-libc_pipe" test has been adjusted to use the VFS pipe plugin
and tests both local pipes and pipes hosted remotely in the VFS server.
Merge adaptations (such as EOF handling, adjustment to VFS/libc
interface changes) by Norman Feske.
Fix#2303
This patch reduces the debug noise for the prominent case of executing
bash with coreutils. Without it, the forked process will always ask for
more RAM immediately when starting up.
This patch improves the libc's write operation to iterate on partial
writes to continuous files until the original write count is reached.
The split of large write operations into small partial writes as
dictated by the VFS infrastructure (e.g., constained by I/O buffer
sizes) becomes invisible to the libc-using application.
Issue #3507
Issue #2303
This patch adds the ability to call 'kill' with the own PID to trigger
the execution of the handler of the specified POSIX signal. This is used
by 'bash', e.g., when cancelling the input of a command via control-c.
Related to issue #3546
It runs pretty well on Raspberry Pi, for example.
Leaving this scenario limited to x86 for autopilot runs only.
Signed-off-by: Oleg Girko <ol@infoserver.lv>
Fixes#3536
Prevents integration failures like follows if the libraries were not
built already in the build directory.
Missing boot modules: libm.lib.so posix.lib.so
Makefile:323: recipe for target 'run/lwip_lx' failed
This adds two new boolean attributes to the <report> tag of the NIC router
configuration 'link_state' and 'link_state_triggers'. The former decides
whether to report the link state of each NIC interface (downlink, uplinks) at
the NIC router. The other decides whether to trigger reporting each time the
link state of an interface changes.
Fixes#3527
This patch introduces a new scheme of handling ioctl operations that
maps ioctls to pseudo-file accesses, similar to how the libc maps socket
calls to socket-fs operations.
A device file can be accompanied with a (hidden) directory that is named
after the device file and hosts pseudo files for triggering the various
device operations. For example, for accessing a terminal, the directory
structure looks like this:
/dev/terminal
/dev/.terminal/info
The 'info' file contains device information in XML format. The type of
the XML node corresponds to the device type. E.g., If the libc receives
a 'TIOCGWINSZ' ioctl for /dev/terminal, it reads the content of
/dev/.terminal/info to obtain the terminal-size information. In this
case, the 'info' file looks as follows:
<terminal rows="25" columns="80/>
Following this scheme, VFS plugins can support ioctl operations by
providing an ioctl directory in addition to the actual device file.
Internally, the mechanism uses the 'os/vfs.h' API to access pseudo
files. Hence, we need to propagate the Vfs::Env to 'vfs_plugin.cc' to
create an instance of a 'Directory' for the root for the VFS.
Issue #3519
The run script used to be the only user of the fatfs_fs server, which
we're going to remove. This patch removes the components for accessing a
real storage device and file system from the run script. The new version
just uses ram_fs.
Issue #3512
This patch extends the 'File_system::Status',
'File_system::Directory_entry', and the related 'Vfs' types with
the following additional information:
- Distinction between continuous and transactional files (Node_type)
(issue #3507)
- Readable, writeable, and executable attributes (Node_rwx),
replacing the former 'mode' bits
(issue #3030)
The types 'Node_rwx', 'Node_type' are defined twice,
once for the VFS (vfs/types.h) and once for the 'File_system'
session (file_system_session/file_system_session.h).
Similarly, there is a direct correspondance between
'Vfs::Directory_service::Dirent' and 'File_system::Directory_entry'.
This duplication of types follows the existing pattern of keeping the
VFS and file-system session independent from each other.
By specifying <libc update_mtime="no"...>, the modification-time update
on VFS-sync operations (as issued whenever a written file is closed)
can explicitly be disabled.
Issue #1784
This patch complements the commit "libc: execve" with the ability to
execute files stored at arbitrary sub directories of the file system.
Issue #3481
Issue #3500
This patch replaces the naive dup2 implementation (that merely
duplicated the context pointer) by the replication of the original
FD state by re-opening the same file with the same flags and seek
position. This prevents a potential double release of the VFS handle
(the FD context). It also implements 'dup'.
Fixes#3505Fixes#3477
- Eliminate call of global libc_config()
- Remove dynamic memory allocation, const cast
- Prepare for moving the state from compilation unit to header
- Fix run/libc_getpwent.run
Issue #3497
This patch unifies the patterns of using the 'Genode' and 'Libc'
namespaces.
Types defined in the 'internal/' headers reside in the 'Libc'
namespace. The code in the headers does not need to use the
'Libc::' prefix.
Compilation units import the 'Libc' namespace after the definition of
local types. Local types reside in the 'Libc' namespace (and should
eventually move to an 'internal/' header).
Since the 'Libc' namespace imports the 'Genode' namespace, there is
no need to use the 'Genode::' prefix. Consequently, code in the
compilation units rarely need to qualify the 'Genode' or 'Libc'
namespaces.
There are a few cases where the 'Libc', the 'Genode', and the global
(libc) namespaces are ambigious. In these cases, an explicit
clarification is needed:
- 'Genode::Allocator' differs from 'Libc::Allocator'.
- 'Genode::Env' differs from 'Libc::Env'.
- Genode's string functions (strcmp, memcpy, strcpy) conflict
with the names of the (global) libc functions.
- There exist both 'Genode::uint64_t' and the libc'c 'uint64_t'.
Issue #3497
This patch is the first step of re-organizing the internal structure of
the libc. The original version involved many direct calls of global
functions (often with side effects) across compilation units, which
made the control flow (e.g., the initialization sequence) hard to
follow.
The new version replaces those ad-hoc interactions with dedicated
interfaces (like suspend.h, resume.h, select.h, current_time.h). The
underlying facilities are provided by the central Libc::Kernel and
selectively propagated to the various compilation units. The latter is
done by a sequence of 'init_*' calls, which eventually will be replaced
by constructor calls.
The addition of new headers increases the chance for name clashes with
existing (public) headers. To disambiguate libc-internal header files
from public headers, this patch moves the former into a new 'internal/'
subdirectory. This makes the include directives easier to follow and the
libc's source-tree structure more tidy.
There are still a few legacies left, which cannot easily be removed
right now (e.g., because noux relies on them). However, the patch moves
those bad apples to legacy.h and legacy.cc, which highlights the
deprecation of those functions.
Issue #3497
- readv_writev: move 'rw_lock' instance into a function scope,
constructing the instance on the first access.
- select: move 'select_cb_list' instance into function scope.
- thread: move 'key_list_lock' and 'keys' into function scope.
- rwlock, semaphore, socket_fs_plugin, thread, thread_create:
instantiate 'Libc::Allocator' per use, alleviating the need for a
global instance.
Issue #3496
Implement getifaddrs and freeifaddrs within the libc using socket
control files at the VFS. Add an "address" and "netmask" file to the
lwIP plugin.
Only a single IPv4 address is initially supported, and the broadcast
address returned will never be valid.
Fixes#3439
This patch implements 'execve' in Genode's libc.
The mechanism relies on the dynamic linker's ability to replace the
loaded binary while keeping crucial libraries - in particular the libc -
intact. The state outside the libc is wiped. For this reason, all libc
internal state needed beyond the 'execve' call must be allocated on a
heap separate from the application-owned malloc heap. E.g.,
libc-internal file-descriptor objects must not be allocated or refer to
any memory object allocated from the malloc heap.
Issue #3481
This patch extends the fork test with explicit checks for the cloned
content of the heap and RW segment as well as the seek position of an
open file descriptor. It adds the new libports/run/fork.run script
that exercises the fork mechanism implemented by the libc. It is based
on noux_fork.run, which tests the mechansim provided by noux. The
test program has been moved from ports to libports.
Issue #3478
The libc already supports the configuration of 'stdin', 'stdout', and
'stderr' using '<libc>' config attributes. This patch equips the libc
with the additional ability to pre-initialize any other file descriptor.
A file descriptor is configured as follows:
<config>
...
<libc ...>
<fd id="3" path="/dev/log" writeable="yes" readable="no" seek="10"/>
...
</libc>
</config>
Furthermore, this patch moves the FD initialization code from the VFS
plugin to the libc kernel initialization because opening the FDs
depends on 'malloc' ('strdup'), which should not be used at early
'Libc::Kernel' initialization time.
Issue #3478
