If a requested report already exists the request is denied with
Invalid_args.
Further, I dusted the report_rom test and added it to the
autopilot list.
There are currently some issue with the mixing/filtering code of vbox.
So instead of using the audio subsystem to do filtering and mixing we
bypass it to get better audio qualitiy. That means that the device
model of the VM has to use the same sample rate as the Audio_out/in
sessions, however.
Issue #1647.
With this commit preliminary audio support in VirtualBox is enabled.
The backend supports playback as well as recording sounds from within
a guest VM. Depending on how the guest configures the device model
the audio output may sound disorted. If the guest uses buffers that
are too small, i.e., 10 ms or less, frequent buffer underruns will
occure.
To get this low-latency one has also to increase vbox' update hz
to 200 (i.e., 5ms).
Fixes#1647.
When a stream was stopped it may still contain valid packets that
will be played automatically when the stream is started again. The
invalidate_all() method may be called after stopping the stream to
prevent this.
Issue #1647.
Run script depending on VFS plugins (i.e., shared objects) like
vfs_jitterentropy.lib.so have to state this dependency rather the actual
binaries linked against libc. The latter introduces a library dependency
that is just not there. For example, the dependency on vfs_jitterentropy
is a result from the config node for libc which automatically loads the
plugin.
The alarm library failed to handle the case properly where an already
scheduled alarm gets rescheduled before it triggered. Even though the
attempt to reschedule the alarm (twice insertion into alarm queue) was
detected, this condition resulted in the mere modification of the
alarm's parameters while keeping the alarm's queue position unchanged.
This, in turn, may violate the invariant that all enqueued alarm objects
are strictly ordered by their deadlines. The patch handles the case by
dequeuing the alarm object before reinserting it into the queue at the
right position.
Fixes#1646
With the introducation of the Audio_in session interface it makes
sense to rename the current available audio drivers. At the moment
only the dde_bsd audio_drv supports Audio_out as well as Audio_in.
The Linux audio_drv only supports Audio_out (there is no demand for
Audio_in support currently) but is renamed nonetheless to make it
easiert to write generic run scripts.
Issue #1644.
The driver is now able to record audio samples. In contrast
to playback it has to be enabled explicitly by setting the
configuration attribute 'recording' to 'yes'. Playback is by
default enabled but may be disabled by setting 'playback' to
'no'. Furthermore it is now possible to configure the mixer
from the configuration. For now, the interface used by vanilla
OpenBSD is just exported.
The following snippet shows how to enable and configure recording
on an Thinkpad X220 where the headset rather than the internal
mic is used as recording source:
! <start name="audio_out_drv">
! <resource name="RAM" quantum="8M"/>
! <provides>
! <service name="Audio_out"/>
! <service name="Audio_in"/>
! </provides>
! <config recording="yes">
! <mixer field="outputs.master" value="255"/>
! <mixer field="record.adc-0:1_source" value="sel2"/>
! <mixer field="record.adc-0:1" value="255"/>
! </config>
! </start>
In addition to selecting the recording source the playback as
well as the recording volume are set to 255 (maximum).
Information about the available mixers and settings in general
may be obtained by setting the 'verbose' to 'yes' in the config
node.
Issue #1644.
Unfortunatly, there is no support for any HDMI/DP based HDA codecs in
this driver. Therefore we try to filter out known devices (normally the
PCI device on 00:03.00). This could also be done in the platform_drv's
configuration by explicitly naming the BDF but for better or worse that
will not work when using a wildcard class like HDAUDIO which is done in
generic run scripts.
Issue #1644.
In line with the Audio_out session a Audio_in session is used to
record audio frames. Like in the Audio_out session shared memory
in form of the Audio_in::Stream is used to transport the frames
from the server to the client. These frames consist of single
channel (mono) samples. An Audio_in::Packet always contains a full
period of frames.
A Audio_in server captures frames and puts them into the
Audio_in::Stream. To do so the server allocates a Audio_in::Packet
from the packet queue embedded in the Audio_in::Stream. If the queue
is already full, the server will override packets and notify the
client by submitting the 'overrun' signal. The client has to cope
with this situation, e.g., by saving packets more frequently.
A client will also receive a 'progress' signal from the server when
a new Audio_in::Packet was submitted to the packet queue.
Fixes#1644.
To archive lower latency the length of a period was reduced from
2048 (~46ms) to 512 (~11.6ms) samples.
It should be noted that this change probably breaks audio in Qemu on
most systems.
Issue #1644.
For most platforms except of NOVA a distinction between pager entrypoint
and pager activation is not needed, and only exists due to historical
reasons. Moreover, the pager thread's execution path is almost identical
between most platforms excluding NOVA, HW, and Fisco.OC. Therefore,
this commit unifies the pager loop for the other platforms, and removes
the pager activation class.
This exit handler is called by the NOVA kernel now when the VM uses PAE
with nested paging and the PDPTE registers need to get updated. With this
commit, an error message is printed if this situation occurs.
Fixes#1640
The reference count get increase to use 2 bytes, so we need the double amount
of selectors as before.
Additionally print a message if we run out of capabilities in a server. Since
our rpc framework is now clever enough to detect that for a printf we don't
need to setup a receive window, we may use a printf instead of a die call.
Eases debugging.
Issue #1601
Showcasing the out of memory kernel issue.
One test triggers oom during memory delegation when talking to core pager
thread. Two other test trigger oom during capability delegation in a
server/client scenario for send and reply phase separately.
Issue #1601
Move FS Node implementations from server/ram_fs to include/ram_fs.
Support embedded ram_fs instances in VFS configurations using <ram/>.
Add 'no space' handling to VFS symlink ops.
Fixes#1635
Allow symlinks to be passed to the read and write file system utilities.
Disallow writes to symlinks with offsets in file system servers, this is
to ensure that writing the target of a symlink is an atomic operation.
Fixes#1604
If a user has e.g. /tftpboot/x86 as directory and configures
base_dir=/tftboot and offset_dir=/x86, this leads to bad behavior
as the load module creates a symlink
/tftpboot/x86/<builddir> -> <absolut_builddir>
in this case instead of the desired
/tftpboot/x86 -> <absolut_builddir>
Furthermore, the module works on
/tftpboot/x86/config-00-00-00-00-00-00
and
/tftpboot/x86/<builddir>/config-00-00-00-00-00-00
afterwards, which looks bad too. As there is no warning at all, this can
be hard to debug. The commit adds an appropriate check with error message and
exit -1 on an existing directory.
Fixes#1630
Increase internal chunk size of heap only if an allocation succeeded
beforehand. Otherwise the chunk size increases with every unsuccessful
invocation and a upgrade of the used ram session will be insufficient and of
no use at all.
Fixes#1632
If some sessions run out of memory in init, resource requests will be issued
to core, which it never will satisfy. Setting some default signal handler
avoids that the default implementation will block init for ever.
Issue #1632
Moves the Bios Data Area header from base-hw to base. Modifies the
base-nova core console that it uses the header as replacement for
the previous BDA bit logic.
Ref #1625
Introduces a class Unmanaged_singleton_constructor that can be declared as
friend to be able to call unmanaged_singleton on classes with a private
constructor. Enables the appliance of the singleton pattern.
Ref #1625
Three things were done:
* Timouts are measured in an asynchronous way to be able to start counters
after the potentially expensive RPC that starts the timeout.
* Timeouts were increased from 45 and 15 seconds to 60 and 20 seconds
because at least on Arndale, results were not stable enough.
* Counting is done on 'unsigned long long' instead of 'unsigned' because
with the higher timeouts, overflows occured.
Fixes#1628
The timer driver previously used floating point operations to translate us to
tics and vice versa. This isn't necessary as the rounding error isn't critical
for the given values but expensive which should be avoided in a code path that
must be executed pretty frequent with high priority.
Ref #1628
