This is a follow-up patch for issue #1784 that solves two
inconsistencies.
- The Vfs::Timestamp::INVALID matches File_system::Timestamp::INVALID
- The Noux libc plugin tests for Timestamp::INVALID instead of a
positive value.
The patch fixes the mtime info as shown in directory listings in
Sculpt's inspect window.
This patch let the VFS server reflect the session policy via the
writeable bit in directory entries instead of merely forwarding the bit
from the respective VFS plugin. This way, all files originating from a
read-only file-system session automatically appear in directory listings
as read-only files.
Related to issue #3507
required due to pthreads becoming/are an integral part of the libc now.
Commit avoids libc error:
Error: libc suspend() called from non-user context (0xaf5c784) - aborting
Issue #3550
'dlopen' causes the ldso to open ROM connections, right now we only
support single file names for these ROM not paths. Therefore, we extract
the file name from path within libc's 'dlopen'
fixes#3551
This is an intermediate fix to handle sends to sockets shut down by the
peer already. A final fix in the libc would add support for the
MSG_NOSIGNAL send flag, generate SIGPIPE, and return the expected EINTR.
Then this patch is no longer required.
This commit also drops the obsolete patch for missing
sysconf(_SC_NPROCESSORS_ONLN), which is now part of libc.
The VFS server as reworked in issue #3547 responds to such an attempt
with a failure as acknowledgement, triggering the client-side error
"Error: packet operation=2 failed" at noux.
This patch prevents the driver from translating Insufficient_ram_quota
and Insufficient_cap_quota exceptions to Service_denied exceptions at
session-creation time. This enables the client to respond to such a
condition by retrying the session creation with increased session quota.
Add a new plugin for creating pipes between pairs of VFS handles. It is
intended to replace the libc_pipe plugin, one of the last remaining libc
plugins.
In contrast to the libc_pipe plugin, this plugin defers cross-handle
notification until I/O signal handling rather than block and unblock
readers using a semaphore. This is a performance regression in the case
of multiple threads blocking on a pipe, but shall be an intermediate
mechanism pending renovations within the libc VFS and threading layers.
As a side effect, threads blocked on a pipe might not be resumed until
the main thread suspends and dispatches I/O signals.
The "test-libc_pipe" test has been adjusted to use the VFS pipe plugin
and tests both local pipes and pipes hosted remotely in the VFS server.
Merge adaptations (such as EOF handling, adjustment to VFS/libc
interface changes) by Norman Feske.
Fix#2303
This patch reworks the VFS server to become easier to understand.
- The packet-stream handling is hidden from the node types.
- Introduced the notion of a "job" as an abstraction from the raw packet
stream.
- The processing of requests is split into three phases:
(1) accepting new jobs,
(2) the execution of jobs, and
(3) the delivery of acknowledgements.
- There is no longer a global fifo of pending nodes. Instead, each
session has a fifo of "active" nodes, which are nodes that wait
for the completion of jobs.
- The Io_node type no longer uses virtual functions as hooks for
the derrived classes. Instead, it provides a number of utility
functions.
- The control flow of the 'Io_progress_handler' is now the same as
for the session-local packet-stream handler.
- Removed dependency from 'file_system/node.h', which is a relic
from the ram_fs.
While reworking the code, the following semantic changes were made
additionally.
- The handling of SEEK_TAIL no longer overwrites the file content at the
end of the file.
- Removed diagnostic message at session-creation time.
- Write loop for continuous files
Issue #3547
Issue #2303
This patch reduces the debug noise for the prominent case of executing
bash with coreutils. Without it, the forked process will always ask for
more RAM immediately when starting up.
This change allows for the conversion of directory entries in place
(i.e., in the VFS server) and anticipates the potential future merge of
both types into one.
Issue #3547
This patch improves the libc's write operation to iterate on partial
writes to continuous files until the original write count is reached.
The split of large write operations into small partial writes as
dictated by the VFS infrastructure (e.g., constained by I/O buffer
sizes) becomes invisible to the libc-using application.
Issue #3507
Issue #2303
Make sure that at least entry is present in the .dynamic section, so the
PT_DYNAMIC segment points to something valid in case there are no
dynamic symbols.
issue #3537
This patch adds the ability to call 'kill' with the own PID to trigger
the execution of the handler of the specified POSIX signal. This is used
by 'bash', e.g., when cancelling the input of a command via control-c.
Related to issue #3546
This patch equips the VFS terminal file system with the ability to
detect user interrupts in the incoming data stream, and propagate this
information via the new pseudo file '.terminal/interrupts'. Each time,
the user presses control-c in the terminal, the value stored in this
pseudo file is increased. Thereby, a VFS client can watch this file to
get notified about the occurrences of user interrupts.
Fixes#3546
The scratch buffer is now allocated from the heap and is shared
between the test as they are executed in a serial fashion. This
change saves memory as the test are constructed at start-up.
Fixes#3539.
This patch adds support for watch notifications for the
'Readonly_value_file_system', which is often used by VFS plugins to
implement pseudo files. It thereby enables VFS clients to respond to
VFS-plugin events (think of terminal resize) dynamically.
Fixes#3523
As genode.org site is now protected by TLS and unencrypted site
is redirected to enctypted one, download URL should be modified
to reflect this change.
Without this change, wget downloads just index.html file.
Signed-off-by: Oleg Girko <ol@infoserver.lv>
Fixes#3538
It runs pretty well on Raspberry Pi, for example.
Leaving this scenario limited to x86 for autopilot runs only.
Signed-off-by: Oleg Girko <ol@infoserver.lv>
Fixes#3536
Prevents integration failures like follows if the libraries were not
built already in the build directory.
Missing boot modules: libm.lib.so posix.lib.so
Makefile:323: recipe for target 'run/lwip_lx' failed
Passing array of unsigned chars to Genode::log() function
makes it converted to void pointer, resulting in printing its address.
Wrapping this array into Genode::Cstring solves this problem
and makes it being printed properly as zero-terminaled string.
Signed-off-by: Oleg Girko <ol@infoserver.lv>
Fixes#3530
Uplink labels were stored in the uplink objects as reference. As uplink objects
may be re-used on re-configuration to avoid unnecessary closing and re-opening
of NIC sessions, the label reference could get invalid as the object that
stored the label content didn't get re-used. Thus, the label is now copied to
the uplink object.
Fixes#3529
This adds two new boolean attributes to the <report> tag of the NIC router
configuration 'link_state' and 'link_state_triggers'. The former decides
whether to report the link state of each NIC interface (downlink, uplinks) at
the NIC router. The other decides whether to trigger reporting each time the
link state of an interface changes.
Fixes#3527
If a MAC address was once allocated for a downlink and during the further
creation of the downlink an exception caused the creation to be aborted, the
NIC router didn't free the MAC address again.
Ref #3525
The handling of exceptions during session creation implies freeing and
detaching the RAM DS behind the session env and session component. But this
was done using the session env located in the same RAM DS, which must
lead to problems. Now, the session env from the RAM DS is copied to the stack
and the operations are done on this temporary instance instead.
Ref #3525
When the construction of a member of Packet_stream_*::Rpc_object after
the _cap member threw an exception, the object was not dissolved from
the entrypoint although the Rpc_object vanished at this point. This was
because the call to 'manage()' happened in the initializer list (for the
_cap member instantiation). The destruction of the _cap member then did
not dissolve the object.
This first fix moves the call to 'manage()' into the constructor body
after the instantiation of all other members. A more sophisticated fix
would use some kind of 'Managed_object' life-time guard that manages an
object on construction and dissolves on destruction.
Ref #3525
When re-configuring a domain from using a static IP config to using a dynamic
IP config, attached interfaces didn't react with doing DHCP discover. This bug
is fixed now and the nic_router_flood test was adapted in a way that it tests
the described behavior.
Fix#3518
This patch introduces a new scheme of handling ioctl operations that
maps ioctls to pseudo-file accesses, similar to how the libc maps socket
calls to socket-fs operations.
A device file can be accompanied with a (hidden) directory that is named
after the device file and hosts pseudo files for triggering the various
device operations. For example, for accessing a terminal, the directory
structure looks like this:
/dev/terminal
/dev/.terminal/info
The 'info' file contains device information in XML format. The type of
the XML node corresponds to the device type. E.g., If the libc receives
a 'TIOCGWINSZ' ioctl for /dev/terminal, it reads the content of
/dev/.terminal/info to obtain the terminal-size information. In this
case, the 'info' file looks as follows:
<terminal rows="25" columns="80/>
Following this scheme, VFS plugins can support ioctl operations by
providing an ioctl directory in addition to the actual device file.
Internally, the mechanism uses the 'os/vfs.h' API to access pseudo
files. Hence, we need to propagate the Vfs::Env to 'vfs_plugin.cc' to
create an instance of a 'Directory' for the root for the VFS.
Issue #3519
The run script used to be the only user of the fatfs_fs server, which
we're going to remove. This patch removes the components for accessing a
real storage device and file system from the run script. The new version
just uses ram_fs.
Issue #3512
Nowadays, we use standard command-line tools like vim to edit init
configurations dynamically, which alleviates the need for a custom CLI.
The CLI-monitor component was too limited for use cases like Sculpt
anyway.
The patch also removes the ancient (and untested for long time)
terminal_mux.run script, which used to be the only remaining user of the
CLI monitor.
Issue #3512
This driver manually checks if the RAM quota is big enough for the
Lan9118 nic session component. The problem is Root_component::_create
from which Root_component::_create_session gets called does already
check this. No need to account for it twice.
Fixes#3514
This patch extends the 'File_system::Status',
'File_system::Directory_entry', and the related 'Vfs' types with
the following additional information:
- Distinction between continuous and transactional files (Node_type)
(issue #3507)
- Readable, writeable, and executable attributes (Node_rwx),
replacing the former 'mode' bits
(issue #3030)
The types 'Node_rwx', 'Node_type' are defined twice,
once for the VFS (vfs/types.h) and once for the 'File_system'
session (file_system_session/file_system_session.h).
Similarly, there is a direct correspondance between
'Vfs::Directory_service::Dirent' and 'File_system::Directory_entry'.
This duplication of types follows the existing pattern of keeping the
VFS and file-system session independent from each other.
Moving the handling into the input-session clients enables more
sophisticated implementations (like Qt5) to apply key-symbol based
handling of those modifiers like correct CTRL-A with QWERTY and AZERTY
layouts and distinction of CTRL-J and Return.
Issue #3483
The API still exports 32-bit address and size values only, which works
as the actual MMIO resources are allocated in platform_drv internally.
Fixes#3494
Map ACPI tables entirely as one dataspaces (not page-by-page). Note, the
current approach does only merge overlapping but not consecutive I/O
memory regions, which would reduce the amount of capabilities required
even further.
Fixes#3495
With the added modification-time support in the libc, the extract tool
requires a timer session, which is not plausible for the purpose of the
program.
This behavior stems from the fact that the libc implicitly writes the
mtime when closing a written file. For this update, it implicitly calls
'clock_gettime', which in turn initializes the timer subsystem within
the libc (creating a timer session).
For the extract tool, the implicitly updated mtime is useless because
the extract tool overwrites this modification time with the mtime stored
in the archive anyway. However, the dependency from a timer service
remains.
This patch explicitly disables the libc's implicit updating of the
file-modification when closing a written file.
Issue #1784
By specifying <libc update_mtime="no"...>, the modification-time update
on VFS-sync operations (as issued whenever a written file is closed)
can explicitly be disabled.
Issue #1784
... and set initial time by using RTC session.
Up to now Noux used a monotic clock whose initial start value always
was '0' (which correlates to the start of the UNIX epoch) to provide
a notion of time. In addition it is now possible to use the RTC
session to set the initial value for use cases where having a proper
real-world time matters.
To use the RTC session the 'rtc' attribute of the '<config>' node
must be set to 'yes'. Thereby the session becomes a mandatory
dependency as Noux will not start without it.
Issue #1784
This patch complements the commit "libc: execve" with the ability to
execute files stored at arbitrary sub directories of the file system.
Issue #3481
Issue #3500
This patch removes ldso's builtin policy of removing any path elements
prepending the ROM module name. Instead, the ROM name is used as is.
This clears the way to access different ROM modules that share the same
name but are stored at different directories behind an fs_rom (e.g.,
/bin/bash vs. /usr/local/bin/bash).
Issue #3500
This patch replaces the naive dup2 implementation (that merely
duplicated the context pointer) by the replication of the original
FD state by re-opening the same file with the same flags and seek
position. This prevents a potential double release of the VFS handle
(the FD context). It also implements 'dup'.
Fixes#3505Fixes#3477
- Eliminate call of global libc_config()
- Remove dynamic memory allocation, const cast
- Prepare for moving the state from compilation unit to header
- Fix run/libc_getpwent.run
Issue #3497
This patch unifies the patterns of using the 'Genode' and 'Libc'
namespaces.
Types defined in the 'internal/' headers reside in the 'Libc'
namespace. The code in the headers does not need to use the
'Libc::' prefix.
Compilation units import the 'Libc' namespace after the definition of
local types. Local types reside in the 'Libc' namespace (and should
eventually move to an 'internal/' header).
Since the 'Libc' namespace imports the 'Genode' namespace, there is
no need to use the 'Genode::' prefix. Consequently, code in the
compilation units rarely need to qualify the 'Genode' or 'Libc'
namespaces.
There are a few cases where the 'Libc', the 'Genode', and the global
(libc) namespaces are ambigious. In these cases, an explicit
clarification is needed:
- 'Genode::Allocator' differs from 'Libc::Allocator'.
- 'Genode::Env' differs from 'Libc::Env'.
- Genode's string functions (strcmp, memcpy, strcpy) conflict
with the names of the (global) libc functions.
- There exist both 'Genode::uint64_t' and the libc'c 'uint64_t'.
Issue #3497
This patch is the first step of re-organizing the internal structure of
the libc. The original version involved many direct calls of global
functions (often with side effects) across compilation units, which
made the control flow (e.g., the initialization sequence) hard to
follow.
The new version replaces those ad-hoc interactions with dedicated
interfaces (like suspend.h, resume.h, select.h, current_time.h). The
underlying facilities are provided by the central Libc::Kernel and
selectively propagated to the various compilation units. The latter is
done by a sequence of 'init_*' calls, which eventually will be replaced
by constructor calls.
The addition of new headers increases the chance for name clashes with
existing (public) headers. To disambiguate libc-internal header files
from public headers, this patch moves the former into a new 'internal/'
subdirectory. This makes the include directives easier to follow and the
libc's source-tree structure more tidy.
There are still a few legacies left, which cannot easily be removed
right now (e.g., because noux relies on them). However, the patch moves
those bad apples to legacy.h and legacy.cc, which highlights the
deprecation of those functions.
Issue #3497
- readv_writev: move 'rw_lock' instance into a function scope,
constructing the instance on the first access.
- select: move 'select_cb_list' instance into function scope.
- thread: move 'key_list_lock' and 'keys' into function scope.
- rwlock, semaphore, socket_fs_plugin, thread, thread_create:
instantiate 'Libc::Allocator' per use, alleviating the need for a
global instance.
Issue #3496
Implement getifaddrs and freeifaddrs within the libc using socket
control files at the VFS. Add an "address" and "netmask" file to the
lwIP plugin.
Only a single IPv4 address is initially supported, and the broadcast
address returned will never be valid.
Fixes#3439
This adds complete character-generator configurations for English (US),
German (Germany and Switzerland), and French (France and Switzerland).
The configs are manually amended and stripped-down versions of
xkb2ifcfg generated configs.
Issue #3483
The Press event is actually a Press_char event with a default codepoint.
The default codepoint is now
Codepoint { Codepoint::INVALID } /* value 0xfffe */
in contrast to
Codepoint { Input::Event::INVALID } /* value 0 */
Issue #3483
This patch implements 'execve' in Genode's libc.
The mechanism relies on the dynamic linker's ability to replace the
loaded binary while keeping crucial libraries - in particular the libc -
intact. The state outside the libc is wiped. For this reason, all libc
internal state needed beyond the 'execve' call must be allocated on a
heap separate from the application-owned malloc heap. E.g.,
libc-internal file-descriptor objects must not be allocated or refer to
any memory object allocated from the malloc heap.
Issue #3481
The allocation of regions within the linker area is normally left to the
best-fit 'Allocator_avl', which happens to populate the linker area
starting with the binary followed by all loaded libraried with no gaps
in between.
When replacing the binary during execve, however, we need to ensure that
the new binary does not conflict with any library that stays resident
during execve. This patch tweaks the linker's region allocation scheme
such that these libraries are placed at the end of the linker area.
Issue #3481
This patch extends the interface of the dynamic linker with the ability
to replace the running binary executable by another one. It is
designated for the implementation of execve. The interface consists of
two new functions.
'Dynamic_linker::keep' marks the specified shared object as unloadable.
This can be used to pin a set of libraries (i.e., the libc) within the
local address space while replacing the binary and other higher-level
libraries.
'Dynamic_linker::respawn' unloads the current binary, loads the one
specifed as first argument, and looks up the entry point symbol of the
new binary, which would be "main" for POSIX programs.
In addition to implementing the new interface, the patch adjusts the
linker at various places that previously assumed the binary to be
constant over runtime.
Issue #3481
This patch is a follow-up commit for "ld: load dynamic linker at static
address on Linux". It suppresses the stderr output of 'dd' when marking
the ELF binary as executable.
Issue #3479
This patch enables the fork.run script to run on base-linux. It should
be regarded as an interim solution, however, because the randomization
performed by the Linux kernel may still - by chance - produce a
situation where one of the libc's malloc heap regions intersects with
another dataspace dynamically attached to the child.
The better solution would be to make the 'Region_map_mmap'
implementation not depend on the kernel's allocation policy by using a
locally implemented allocator.
Issue #3478
This patch extends the fork test with explicit checks for the cloned
content of the heap and RW segment as well as the seek position of an
open file descriptor. It adds the new libports/run/fork.run script
that exercises the fork mechanism implemented by the libc. It is based
on noux_fork.run, which tests the mechansim provided by noux. The
test program has been moved from ports to libports.
Issue #3478
The libc already supports the configuration of 'stdin', 'stdout', and
'stderr' using '<libc>' config attributes. This patch equips the libc
with the additional ability to pre-initialize any other file descriptor.
A file descriptor is configured as follows:
<config>
...
<libc ...>
<fd id="3" path="/dev/log" writeable="yes" readable="no" seek="10"/>
...
</libc>
</config>
Furthermore, this patch moves the FD initialization code from the VFS
plugin to the libc kernel initialization because opening the FDs
depends on 'malloc' ('strdup'), which should not be used at early
'Libc::Kernel' initialization time.
Issue #3478
This patch replaces the former use of an Allocator_avl with the Id_space
utility, which is safer to use and allows for the iteration of all
elements. The iteration over open file descriptors is needed for
implementing 'fork'.
Issue #3478
The new 'Heap::for_each_region' method provides information about the
heap's used virtual-memory regions. This method allows for the
mirroring of the heap state as needed by 'fork'.
Issue #3478
By specifying the config attribute 'check_ctors="no"', the dynamic
linker won't abort the program on a missing call of
'Env::exec_static_constructors'. This is the case for forked programs
where the ctors were already executed by the forking program prior the
fork operation.
Issue #3478
This patch enhances the 'base/shared_object.h' interface of the dynamic
linker with the function 'for_each_loaded_object', which allows the
caller to obtain information about the currently loaded binary and
shared libraries.
The new interface is a base mechanism needed for implementing 'fork' in
the libc.
Issue #3478
By using Genode::strncpy instead of the libc's strncpy, we cannot end up
in the situation where the result lacks the zero termination (where the
number of charactors equals the destination buffer size).
This patch handles the case where a PD's cap quota becomes exhausted
on the attempt to transfer caps via 'Env::pd().transfer_quota'. The
solution mirrors the existing code for RAM quota.
Prior this patch, the 'transfer_quota' operation would trigger an
'Out_of_caps' exception.
These are time-type conversion functions (including leap years and
seconds) taken from musl-libc git rev
c82d3bada30cb27e14abda7859da5d2e784830ff with some adaptions. Musl is
licensed under permissive MIT license.
Issue #3450
A client may register a signal handler to be notified whenever the
RTC value was changed, i.e., a mis-configured clock was synchronized,
by calling 'set_sigh()'.
Issue #3450
The GEMDOS variant is supported by NetBSD's msdos file-system driver.
However, it must explicitly be enabled by a mount flag. This patch
adds the principle ability for passing mount flags to file system
drivers and enables the MSDOSFSMNT_GEMDOSFS flag based on the
config attribute 'gemdos="yes"'.
Issue #3471
This patch enhances part_block with support for parsing the AHDI
partition scheme, and the detection of the GEMDOS variant of FAT as used
by Atari TOS. As a side effect of the implementation, the patch improves
the MBR parsing code by avoiding pointers and using const qualifiers.
Fixes#3470
This patch handles the situation where the usb_block_drv exits for any
reason, in particular when the driver fails to initialize the device. In
such cases, the usb_block_drv used to stay stale in the system,
effectively preventing the device from being passed to a VM. With the
patch, the USB storage device gets flagged as failed, the usb_block_drv
is removed from the runtime, and the condition is reflected at the user
interface.
This situation occurred on the attempt to access an iomega zip drive
with a version of the usb_block_drv without support for the START-STOP
command, but it may potentially also occur in other circumstances.
Fixes#3468
On Fujitsu S936, evaluating the _BIF method on each battery-info update
successively increased the RAM usage, while _BST (dynamic battery
status) and _STA (generic status) did not show this behavior. Therefore
this commit retrieves only dynamic information periodically (resp. on
SCI IRQ). Now, acpica hast static RAM usage in idle state for 24+ hours.
The root cause for the increased RAM usage is still shady. While it
could just be normal that it grows until a certain yet unknown limit,
there may also be memory leak in contrib code or some strange AML on the
designated notebook.
Issue #3454
This mode is used on Linux (if acpi=strict is not set on boot cmdline)
and Windows. The mode ignores certain errors and/or bad AML constructs.
1) Allow "implicit return" of last value in a control method
2) Allow access beyond the end of an operation region
3) Allow access to uninitialized locals/args (auto-init to integer 0)
4) Allow ANY object type to be a source operand for the Store() operator
5) Allow unresolved references (invalid target name) in package objects
6) Enable warning messages for behavior that is not ACPI spec compliant
