Commit Graph

681 Commits

Author SHA1 Message Date
Norman Feske
d072c408ab dde_linux: call init_page_count for each page
The lx_emul_virt_to_pages implementation initialized the page ref
counter only for the first page, leaving the remaining elements in
uninitialized state. This, in turn, rendered the Linux page_pool (as
used by the emac network driver) ineffective, ultimately leading the a
memory leak. The fix changes the call of 'init_page_count' to take the
loop variable as argument.

Issue #4225
2021-10-13 14:02:16 +02:00
Norman Feske
914a41a8bd dde_linux: adjustments for Linux 5.14.1
Issue #4259
2021-10-13 14:01:03 +02:00
Christian Helmuth
83c5648d33 depot: update recipe hashes 2021-08-30 15:00:39 +02:00
Christian Helmuth
a362505e8a usb_host: report bInterfaceProtocol too
Thanks to Raphael for the patch.
2021-08-30 15:00:38 +02:00
Norman Feske
324ad33736 lx_emul: prevent clk_disable_unused
Issue #4253
2021-08-30 15:00:36 +02:00
Norman Feske
2cb4157211 lx_emul: support IRQCHIP_DECLARE initcalls
Similar to CLK_OF_DECLARE, this patch extends lx_emul with ability to
extend the __irqchip_of_table with secondary interrupt controllers.

Issue #4253
2021-08-30 15:00:36 +02:00
Norman Feske
c95af254f4 lx_emul: sanitize size 0 for __kmalloc
Driver code such as mfd-core.c may pass 0 as argument n to kcalloc,
which eventually results in an allocation size 0.

  res = kcalloc(cell->num_resources, sizeof(*res), GFP_KERNEL);

Since 'res' is checked against NULL for success, kmalloc must not return
a NULL pointer in this case. The patch works around this issue by
forcing an allocation size of 1 byte in this case.

Issue #4253
2021-08-30 15:00:36 +02:00
Norman Feske
29032caf40 lx_emul: support CLK_OF_DECLARE initcall mechanism
Clock providers such as drivers/clk/sunxi-ng/ccu-sun8i-r.c don't use
regular init calls but declare their init functions via CLK_OF_DECLARE,
which fill the __clk_of_table. Linux populates the table statically by
using special sections declared in the linker script. In contrast, we
populate the table by expanding the macro to global constructor
functions.

The __clk_of_table is then processed by the call of of_clk_init(NULL).

Issue #4253
2021-08-30 15:00:36 +02:00
Norman Feske
36af114d78 lx_emul: enhance krealloc implementation
Issue #4253
2021-08-30 15:00:36 +02:00
Christian Helmuth
7618c9410a depot: update recipe hashes 2021-08-18 15:06:12 +02:00
Sebastian Sumpf
2fe70f111b intel_fb_drv: Aperture exhaustion and display IRQ patch
* display an error in case the aperture is too small for all
  framebuffers
* handle display engine IRQs only

issue #4233
2021-08-18 15:06:11 +02:00
Christian Helmuth
fce525f122 depot: update recipe hashes 2021-07-28 11:27:05 +02:00
Stefan Kalkowski
1a526e73a3 dde_linux: introduce new lx_emul/lx_kit library
The re-newed approach currently supports ARM 64-bit only.
It depends on the Platform API of the ARM architecture.
It tries to meet the original semantic of the Linux kernel
functions as far as possible. To achieve this, device drivers
using this library should reference the original Linux kernel
headers at foremost. Only the headers in `src/include/lx_emul/shadow`
have to shadow clone the original ones.

Fix #4225
2021-07-28 11:27:04 +02:00
Johannes Schlatow
1aba330ae6 dde_linux: fix packet size calc. of Nic drivers
skb_push() already increases the skb->len by ETH_HLEN, hence adding
ETH_HLEN to the packet_size is redundant.

A too large packet size becomes a problem for large MTUs. With a maximum
MTU of 1500, adding ETH_HLEN twice will lead to a packet size of 1528.
Since this is larger than what we expect for good-old Ethernet (max. 1522),
some clients (e.g. the e1000 model in vbox5) may drop these packets.

Fixes genodelabs/genode#4228
2021-07-28 11:27:04 +02:00
Stefan Kalkowski
b16bb82f8b dde_linux: mark lx_emul and lx_kit as legacy
* Move headers in src/include into legacy sub-directory
* Move src/lx_kit to src/lib/legacy/

Fix #4223
2021-07-28 11:25:21 +02:00
Martin Stein
388e2a0e6d fec nic driver: fix compiler warnings
Fixes #4178
2021-07-28 11:24:55 +02:00
Christian Helmuth
ece33d37f8 depot: update recipe hashes 2021-06-25 11:46:37 +02:00
Sebastian Sumpf
a58473dece autopilot: add usb_hid_reconnect run script
- Adjust script to run on Qemu x86 only

fixes #4205
2021-06-25 11:43:41 +02:00
Martin Stein
0dc7084b0f wifi_drv: fix compile warnings with gcc 10
Fixes #4202
2021-06-25 11:41:45 +02:00
Johannes Schlatow
7346defc26 usb_modem_drv: remove nic_server mode
genodelabs/genode#4201
2021-06-25 11:41:45 +02:00
Johannes Schlatow
dff1df0b49 usb_modem: do not fail on netif_stop_queue
genodelabs/genode#4201
2021-06-25 11:41:45 +02:00
Johannes Schlatow
52a4293bbc depot: add usb_modem_drv archives
genodelabs/genode#4201
2021-06-25 11:41:44 +02:00
Sebastian Sumpf
eabda8907f usb_host: add support to flush EP transfers
This causes all pending transfers of a EP to be canceled and in turn to
be acked by the raw session.

issue #4196
2021-06-25 11:41:44 +02:00
Martin Stein
ff128df131 dde_linux/fec: fix unsynchronized TX DMA write
Unfortunately, our current implementation of 'wmb()' doesn't seem to do what we
want it to do. On base-hw + imx6q_sabrelite, the write of bdp->cbd_sc seems to
get re-ordered after the write to txq->bd.reg_desc_active in the transmission
path of the contrib code. Due to this, the transmission of the packet is only
triggered the next time a packet is sent. However, we only quick-fix it by
enforcing the execution of the write with a volatile global read as we will
soon update the FEC NIC port with a new DDE approach anyway.

Fixes #4010
2021-06-25 11:41:44 +02:00
Alexander Boettcher
27004e1fd5 usb: remove monolithic usb driver
+ adjust README files

Fixes #4173
2021-06-25 11:41:43 +02:00
Stefan Kalkowski
8408bf6ac0 fec_nic_drv: remove nic_server mode
Issue #4133
2021-06-01 15:51:22 +02:00
Christian Helmuth
1d52bd017d depot: update recipe hashes 2021-05-28 14:16:46 +02:00
Christian Prochaska
f2ff1a6d52 dde_linux: save and restore ARM FPU state in setjmp.S
Fixes #4161
2021-05-28 14:16:45 +02:00
Christian Helmuth
f0b9549376 wifi_drv: optionally report MAC address
Issue #4133
2021-05-28 14:16:45 +02:00
Christian Helmuth
aab6f52325 wifi_drv: remove nic_server mode
Issue #4133
2021-05-28 14:16:45 +02:00
Christian Helmuth
4abc530974 ipxe_nic_drv: remove nic_server mode
Issue #4133
2021-05-28 14:16:45 +02:00
Josef Söntgen
0f72a342f3 wifi_drv: fix setting 'bssid' in config
The wpa_supplicant refuses to set the BSSID in case it is quoted.
Removing the quotes allows for specifying the BSSID in the
configuration.

Fixes #4175.
2021-05-28 14:16:45 +02:00
Alexander Boettcher
6b9fcc9449 drivers_interactive-rpi: use usb host/hid driver
Issue #4173
2021-05-28 14:16:45 +02:00
Sebastian Sumpf
7fcf9053b9 usb_hid: perform device destruction on unplug signal only
- Do not perform desctruction on report updatea in EP because
  'unregister_device' may block on Led state 'update' (synchronous
  control message) leading to the driver being stuck because no more
  signals are received
- Check if device is present in 'submit_urb' calls

fixes #4166
2021-05-28 14:16:44 +02:00
Sebastian Sumpf
6910b880e7 usb_host: make device creation/destruction robust
- Signal device ready depending on state (ready or not) immediately or
  when "actconfig" is set
- Report new devices when ready
- Drain packet stream in case there is no device present (needed for
  synchronous operations at client side)
- Do not use 'session_device' on device destruction, check pointer
  directly instead

issue #4149
2021-05-28 14:16:44 +02:00
Christian Helmuth
813f4d976b lxip: allocate skb with properly aligned IP header
Comment in Linux sources:

  Since an ethernet header is 14 bytes network drivers often end up with
  the IP header at an unaligned offset. The IP header can be aligned by
  shifting the start of the packet by 2 bytes. Drivers should do this
  with:

  skb_reserve(skb, NET_IP_ALIGN);

This is ensured when using netdev_alloc_skb_ip_align().

Issue #4094
2021-05-28 14:15:26 +02:00
Sebastian Sumpf
a24224ffc3 usb_host: improve isochronous performance on Intel
This patch takes advantage of block transfer interrupts on Intel XHCI
controllers which is used during isochronous transfers. Because of a bug
in hardware (see usb_host_isoc_bei.patch header), this feature has been
disabled for Intel leading to up to 8000 interrupts/s for isochronous
transfer causing severe CPU consumption on Genode. With this commit we
lower host driver consumption to normal levels.

issue #4149
2021-05-28 14:15:26 +02:00
Sebastian Sumpf
9543161827 usb_host: Move task to device in USB session
A Lx::Task is now associated to a USB device not the session any more.
This implies that a task lives as long as the device making it possible
to gracefully handle outstanding requests (i.e., synchronous) in case
the session has been closed.

issue #4149
2021-05-28 14:15:26 +02:00
Christian Helmuth
777923f9bd depot: update recipe hashes 2021-05-10 11:18:12 +02:00
Josef Söntgen
0f0edc0134 usb_host: implement sg_pcopy_* as TRACE dummies
The former implementation called 'TRACE_AND_STOP' which led to the
'usb_host_drv' to stop whenever such a function was called. Rather
than stopping return '0' and let the contrib code deal with this
situation.

Issue #4116.
2021-05-10 11:16:24 +02:00
Josef Söntgen
d0f084d449 usb_host: backport xhci bounce-buffer fix
This commit backports the Linux upstream commit (d4a6106) [*]
that introduces a check to prevent the sglist from being used
unconditionally.

[*] 'xhci: fix bounce buffer usage for non-sg list case'

Fixes #4116.
2021-05-10 11:16:24 +02:00
Norman Feske
516a9a6925 depot: update recipe hashes 2021-05-05 11:35:31 +02:00
Christian Prochaska
8f23e377d9 lxip: fix build error with gcc 10
Fixes #4102
2021-05-05 11:35:31 +02:00
Stefan Kalkowski
421d2bed40 platform driver: make device info XML optional
* The device XML information dataspace is only provided,
  when the client's policy states `info="yes"`
* The device XM information gets changed to include the
  physical resource names (I/O memory and IRQ addresses)
  instead of virtual ids and page offset

Fix #4077
2021-05-05 11:31:16 +02:00
Christian Helmuth
3f450a77e1 Fix touchscreen config in usb_hid README 2021-05-05 11:21:43 +02:00
Johannes Schlatow
462bff5aef dde_linux: test subdevice id for device matching
As linux drivers may distinguish device configuration by pci subdevice id in
addition to the pci device id, the former must also be used for finding the
matching entry. Otherwise, e.g., the iwlwifi driver might load the wrong
firmware.

Side note: Add break statement to save superfluous iterations after
match was identified.

Fixes genodelabs#4076
2021-05-05 11:21:43 +02:00
Norman Feske
efbed6f7bf depot: update recipe hashes 2021-04-20 12:10:58 +02:00
Norman Feske
dc8c899c1d Streamline platform-device API on ARM
This API rework eases the access to memory-mapped I/O registers and
interrupts when using the platform driver. It introduces the notions of

- Platform::Device       - one device obtained from a platform session
- Platform::Device::Mmio - locally-mapped MMIO registers of a device
- Platform::Device::Irq  - interface for receiving device interrupts

The patch touches several drivers. Some drivers would require a
significant structural change to adopt the new API (e.g., net/virtio,
dde_linux drivers, imx gpio). In these cases, the patch adds
compatibility shims meant to be temporary. In other cases (e.g., imx
i2c), the adaptation was simple enough to carry through.

Fixes #4075
2021-04-20 12:10:58 +02:00
Stefan Kalkowski
d1cf9c86b8 os: introduce device type in platform driver
* Move "compatible" property value to "type" attribute
* Turn device_by_property helper in Platform::Connection into device_by_type

Fix #4074
2021-04-20 12:10:58 +02:00
Norman Feske
0339318572 platform_session: cache arg for alloc_dma_buffer
This patch extends the 'Platform_session::alloc_dma_buffer' interface
with a 'Cache' argument that corresponds to the argument accepted by
'Ram_allocator::alloc', which is used by the platform driver under the
hood.

Since the x86 platform driver used to be hardwired to allocate DMA
buffers as UNCACHED, I adjusted all drivers by specifying the UNCACHED
argument. Right now, this is needed as a hint for core to steer the
allocation of I/O page tables. Once we eliminate the need for such hints
(by introducing an explicit 'Region_map::attach_dma' operation), we can
revisit the drivers individually because cached DMA buffers should
generally be fine on the x86 architecture.

Issue #2243
2021-04-20 12:10:57 +02:00