This compilation unit contains a global constructor, which violates our
assumption that the libc is free of global constructors on ARMv7.
Specifically, the graphical terminal fails with the following message:
[init -> terminal] Error: Component::construct() returned without executing
pending static constructors (fix by calling
Genode::Env::exec_static_constructors())
[init -> terminal] Error: Uncaught exception of type 'Linker::Fatal'
In this case, the libc-less terminal uses the VFS. The VFS mounts the
ttf VFS plugin. The ttf VFS plugin depends on the libc.
The compilation unit 'arm_initfini.c' can safely be excluded because it
merely initializes the global '_libc_arm_fpu_present' variable, which
is not used by the current version of our libc/libm.
Fixes#4080
This API rework eases the access to memory-mapped I/O registers and
interrupts when using the platform driver. It introduces the notions of
- Platform::Device - one device obtained from a platform session
- Platform::Device::Mmio - locally-mapped MMIO registers of a device
- Platform::Device::Irq - interface for receiving device interrupts
The patch touches several drivers. Some drivers would require a
significant structural change to adopt the new API (e.g., net/virtio,
dde_linux drivers, imx gpio). In these cases, the patch adds
compatibility shims meant to be temporary. In other cases (e.g., imx
i2c), the adaptation was simple enough to carry through.
Fixes#4075
This patch adjusts the matching of the IP address such that the external
IP address is used as opposed the the NAT-local address. It is follow-up
fix of the conversion to the uplink session interface.
Issue #3961
When we allowed symbol resolution during exceptions, we used the shared
object lock to protect ELF object list manipulation (e.g., dlopen,
dclose) when executing exception unwinding code in the linker.
Unfortunately, sometimes libraries that are loaded by 'dlopen' may raise
exceptions in the process, leading to a deadlock within the unwind code.
In order to resolve this, we now protect the object list operations
(i.e., enqueue, removal, iteration) by a separate mutex. This allows
the shared object interface to throw exceptions.
issue #4071
This patch unifies the core-internal 'Mapping' type across all base
platforms.
As one minor downside on seL4, the diagnostic error messages when
observing faults other than page faults no longer print the faulting
thread and PD names.
Issue #2243
These messages pollute the boot log of Sculpt OS when ROM modules are
requested for files of the config fs before the sculpt manager has
created their first version.
When the own cap quota of a client does not suffice for a cap upgrade of
an existing session to a server, the client must issue a cap-resource
request to the parent. This logic was already in place for RAM quota but
was missing for cap quota.
Issue #4072
When callback functions of `dl_iterate_phdr` required further jump slot
relocations this lead to a deadlock. Therefore, we allow the resolution
of further symbols from callback functions, but protect the ELF object
list during the iteration, which blocks any dynamic loading (e.g.,
dlopen/dlcose) of shared object by other threads while in program header
iteration.
fixes#4071
Apparently the skewed motion timings came from the issue fixed by
"timer: restore semantics of periodic timeout 0". With the current
version of the timer, the original motion parameters work just fine.
This patch extends the 'Platform_session::alloc_dma_buffer' interface
with a 'Cache' argument that corresponds to the argument accepted by
'Ram_allocator::alloc', which is used by the platform driver under the
hood.
Since the x86 platform driver used to be hardwired to allocate DMA
buffers as UNCACHED, I adjusted all drivers by specifying the UNCACHED
argument. Right now, this is needed as a hint for core to steer the
allocation of I/O page tables. Once we eliminate the need for such hints
(by introducing an explicit 'Region_map::attach_dma' operation), we can
revisit the drivers individually because cached DMA buffers should
generally be fine on the x86 architecture.
Issue #2243
This change avoids many repetetive Genode:: prefixes, making the code
easier to read. The patch also includes a few consistency fixes
regarding include guards and file headers. It also renames
Platform_device::String to Platform_device::Device:name.
Issue #2243
This patch adds the designated alternative to Dataspace::phys_addr to
the platform-session interface. Under the hood, the platform driver
still calls Dataspace::phys_addr but it should eventuelly become the
only caller before we can abolish this function.
Issue #2243
This commit optimizes the 'Child::resolve_session_request'
implementation by introducing an internal 'Route_model' for quickly
traversing routing rules instead of parsing XML on each session request.
Fixes#4068
This commit replaces the hand-crafted config processing by the use of
the 'List_model' utility. This has the following advantages:
- The parsing follows a common formalism that makes the code
easier to maintain and to understand. Several parts of the code
had to be changed (for the better) to make it fit the list model
approach. E.g., the child states have become more expressive
and logical.
- In the common case, the XML data is traversed only once, which
increases the parsing speed in dynamic scenarios.
- The code becomes easier to optimize. In particular, the patch skips
the re-evaluation of the session routing if no service is affected
by the config change.
The patch also revisits the init test by removing overly long sleep
phases and extending a few sleep phases that were too short when
executing the test on Qemu.
Issue #4068
This patch changes the 'alloc_aligned' interface as follows:
- The former 'from' and 'to' arguments are replaced by a single
'range' argument.
- The distinction of the use cases of regular allocations vs.
address-constrained allocations is now overed by a dedicated
overload instead of relying on a default argument.
- The 'align' argument has been changed from 'int' to 'unsigned'
to be better compatible with 'addr_t' and 'size_t'.
Fixes#4067
This patch avoids the RTC driver's aggressive polling during the
(CPU-bounded) boot of Sculpt OS. As the RTC is not needed during bootup,
this patch reduces the boot time (on Qemu) by 2-4 seconds.
Fixes#4065
GDB monitor re-uses internal parts of the sandbox library. It thereby
relies on the internal detail of how local headers are included (using
"" instead of the now usual practice <>). A seemingly unrelated change
"init/sandbox: avoid repetitive state reports" eventually broke the
build of the GDB monitor.
This patch makes the GDB monitor less reliant on the way of how the
sandbox includes headers internally.
It also fixes a few warnings caused by the double definition of
__GENODE__ (adding an missing include guard and making the #define
conditional).
Related to issue #4064
The 'Timer::Session::trigger_periodic' RPC function used to accept 0 as
a way to de-schedule the periodic processing. Several components such as
nitpicker relied on this special case. In "timeout: rework timeout
framework", the value of zero was silently clamped to 1, which has the
opposite effect: triggering signals at the maximum rate. This results in
a visible effect in Sculpt where the leitzentrale-nitpicker instance
produces a constant load of 2% CPU time.
This patch restores the original timer semantics by
- Documenting it in timer_session.h,
- Handling the case explicitly in the timer implementation, and
- Replacing the silent clamping of the unexpected value 0 passed
to the timeout framework by a diagnostic error message.
Issue #3884
This patch restores the ability to launch nitpicker within a gui_fb
window. It is a follow-up fix for "nitpicker: make framebuffer and input
optional".
Issue #3812
This patch enables sculpt to utilize the CPU reset mechanism via the
PS/2 controller as well as the information provided via the ACPI FADT
information. Whenever the /config/system file is changed to <system
state="reset"/>, both mechanisms are triggered.
Supporting both mechanisms is useful because the PS/2-based reset does
not work reliably on modern machines. The PS/2-based reset is useful in
the case when the FADT reset information refers to the PS/2 command
port. In this case, the platform driver is unable to access this port
because it is already handed out to the PS/2 driver. In this case, the
PS/2 driver kicks in.
Issue #2726
If 'system="yes"' is specified in the <config>, the platform driver now
monitors the content of the system ROM. Should the value become "reset",
a reset is triggered using information obtained from the ACPI driver.
Related to issue #2726
The change of the platform driver is needed to avoid a parsing error of
the ACPI ROM when encountering an unexpected <reset> node.
Thanks to Alexander Boettcher for the preventing the regression of #3829
and improving the adherence to the ACPI spec when parsing the reset type.
Related to issue #2726
