Makeinfo versions greater 5 treat an @itemx that isn't preceeded by an @item
not as warning anymore but as error. The GCC version 4.7.2 that is used by
noux currently triggers this error multiple times. This commit adds a patch
to 'make prepare PKG="gcc"' that avoids the use of @itemx without preceeding
@item. As GCC versions greater than 4.8 should fix this problem by themselves
this should be seen as temporary quick fix.
ref #964
At least with base-hw, the endless loop at the end of the fork
parent slows execution of the fork child dramatically. Using
libc function pause() is a cleaner solution anyways.
ref #964
Issue #949
Related to issue #808 - one way to nearly double the maximum VM size for
VMs on 32bit Genode/Nova host if decreased performance is acceptable.
To ease the creation of custom virtual machine monitors on top of
NOVA, this patch moves generic utilities from vancouver resp. seoul to the
public include location 'ports/include/vmm'. As a nice side effect,
this change simplifies 'vancouver/main.cc'.
Issue #949
DosBox is DOS-Emulator which is mainly used for playing old
DOS games on POSIX systems and newer Windows versions.
This port of DosBox runs natively on Genode by using its
SDL backend. It is currently only works on x86_*.
Fixes#937.
This patch changes the noux.run script to use the new log_terminal
component instead of an UART driver. Besides being a nice way to test
the log_terminal service, the new version is much simpler and it just
became compatible to Linux as it no longer relies on an UART driver.
Issue #947
There are programms that use struct stat's st_ino field to check certain
conditions. Since we are using multiple filesystems in a noux session we
cannot use the inode number which the actual filesystem provides.
Therefore we calculate a random inode number by hashing the stated path.
Fixes#299.
This patch adds a 'gdb' command to 'cli_monitor', which makes it possible
to debug an application with GDB.
The command works similarly to the 'start' command, but instead of
starting the subsystem binary directly, an 'init' subsystem gets
started, which then starts 'terminal_crosslink', 'noux', GDB and
'gdb_monitor' (which starts the application binary as its target).
So, for the 'gdb' command to work, these additional components need to
be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the
file 'gdb_command_config' are expected to be ROM modules. The Noux GDB
client needs to get mounted at '/bin' in Noux and the target binaries need
to be available as ROM modules (loaded by 'gdb_monitor') and also mounted
at '/gdb' in Noux (loaded by the GDB client).
Additionally, the source code of the target application can be provided
at '/gdb/src/ in Noux. How the Noux mountings get established can
be configured in the 'gdb_command_config' file. The default configuration
in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar
archive named 'gdb.tar', the GDB target binaries from a tar archive named
'gdb_target.tar' and the target source code from a tar archive named
'gdb_target-src.tar'.
The patch includes an 'expect' include file (ports/run/noux_gdb.inc)
which provides functions that help to create those tar files:
- 'create_gdb_tar' creates a tar archive for the 'gdb' client
- 'create_binary_tar' creates a tar archive for the target application
- 'create_source_tar' creates a tar archive for the source code of
the target application
- 'create_binary_and_source_tars' is a convenience wrapper for the previous
two functions
The patch also includes an example run script
(ports/run/noux_gdb_dynamic.run).
The 'gdb' command supports the following command line options:
- --ram: the initial RAM quota provided to the whole subsystem
(including the GDB-related components)
- --ram-limit: limit for expanding RAM quota
- --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve
for itself
Fixes#928.
This patch implements the POSIX signal functionality needed to interrupt a
running Noux GDB by pressing 'Ctrl-C'.
It allows to register a signal handler for the 'SIGINT' signal, which
gets executed after 'Ctrl-C' is received from the terminal. With the
current state of the implementation, the signal handler only gets executed
when the Noux application calls a 'read()', 'write()', 'ftruncate()' or
'select()' syscall.
Fixes#923.
* Remove far too low default values from Nic::Connection constructor
* Extend lwip initialization function with desired TX/RX buffer sizes
* Add configuration possibility to libc_lwip_dhcp plugin to define
buffer sizes, like the following:
'<libc tx_buf_size="1M" tx_buf_size="1M"/>'
Fixes#892
Statically configured NIC bridge clients must be configured via
<policy...> nodes in the config. Otherwise, the bridge can't answer ARP
requests or route traffic.
This patch updates the launchpad config to use XML attributes and
removes the built-in default configuration (which is only meaningful
for demo.run anyway).
Originally, the convenience utility for accessing a process
configuration came in the form of a header file. But this causes
aliasing problems if multiple compilation units access the config while
the configuration gets dynamically updated. Moving the implementation of
the accessor to the singleton object into a library solves those
problems.
binary_ds cap is attempted to free up twice by
_root_dir->release(_name, _binary_ds) in ~Child de-constructor and by
Static_dataspace_info _binary_ds_info de-constructor.
This commit keeps all binary related information inside a struct which gets
freed up after all noux session book keep cleaning is done.
Issue #485
The netperf test configures the target Genode system for with
10.0.2.55/24. Also, nic_drv on base-linux uses the virtual ethernet
device 'tap0', which must be configured for the test user and network
address 10.0.2.1/24 on the test host like follows.
tunctl -t tap0 -u <user running test>
ip address add 10.0.2.1/24 dev tap
ip link set tap0 up
This patch moves the GDB commands to set a breakpoint in the 'main()'
function into a separate file that can be included from other run scripts.
Fixes#876.
If the path of a Genode source file (as extracted from the binary test
application) contains a part like '/a/b/../' where '/a' exists, but '/a/b'
does not exist anymore, 'tar' complains. With this patch, the run script
normalizes the path before calling 'tar'.
Fixes#875.
Don't account the boottime to the actual compile time - since it varies quite
a lot if somebody else utilize the network with lwip tests for example ;-).
At least 64bit Seoul dies with Region_conflict reliable and reproducible.
When during startup of Seoul some Genode code (caused by executing some
constructors) try to attach a region, the region manager code in the rm_session
will try to place the attachment at the smallest large enough aligned free
virtual region.
For now, I observed one attachment causing trouble (but not knowing who causes
this - it does also not really matter). The questionable region is 0x4000 of
size for 32bit and 0x8000 of size for 64bit.
To steer the region manager a bit, we try now following trick:
With this commit the load address of the binary for 32 and 64 bit is moved
close to the end of the virtual address space, but leaving enough free virtual
space for the above observed attachment (and a bit more).
The region manager code now will try to fill up the virtual region behind
the binary up to the end of the virtual address space, effectively letting the
lower virtual region untouched - hopefully.
Works for now, but it will break again - for sure.
Fixes#519
If a script is executed which uses a interpreter that does not exist the
construction of the child fails and potentially leaks memory because the
wrong delete operator is called.
Therefore the binary dataspace of the script and the binary dataspace of
the interpreter are now checked before a new child will be created.
Fixes#812.
This patch extends the 'Parent::session()' and 'Root::session()'
functions with an additional 'affinity' parameter, which is inteded to
express the preferred affinity of the new session. For CPU sessions
provided by core, the values will be used to select the set of CPUs
assigned to the CPU session. For other services, the session affinity
information can be utilized to optimize the locality of the server
thread with the client. For example, to enable the IRQ session to route
an IRQ to the CPU core on which the corresponding device driver (the IRQ
client) is running.
This patch introduces new types for expressing CPU affinities. Instead
of dealing with physical CPU numbers, affinities are expressed as
rectangles in a grid of virtual CPU nodes. This clears the way to
conveniently assign sets of adjacent CPUs to subsystems, each of them
managing their respective viewport of the coordinate space.
By using 2D Cartesian coordinates, the locality of CPU nodes can be
modeled for different topologies such as SMP (simple Nx1 grid), grids of
NUMA nodes, or ring topologies.
This patch eliminates the "no attachment at..." warnings, which
were caused by a use-after-free problem of dataspaces. When a
dataspace was destroyed, the users of the dataspace were not
informed and therefore could not revert possible attachments to
RM sessions. The fix introduces a callback mechanism that allows
dataspace users (i.e., RM regions) to register for the event that
a dataspace vanishes.
The following types of dataspaces are handled:
* RAM dataspaces
* ROM dataspaces
* The process binary
* The binary of the dynamic linker
* Args dataspace
* Sysio dataspace
* Env dataspace
* managed RM dataspaces
The handling of ROM dataspaces is still not complete. When forking,
the ROM dataspace of the parent process gets just reused without
creating proper meta data ('Dataspace_info') for the forked process.
Similar issues might arise from other special dataspaces (e.g.,
args, env, sysio).
This patch removes all "no attachment at..." warnings except for
one (an attachment at 0).
Issue #485
The 'check_dev_tty()' function calls 'ttyname()', which calls the pthread
stub function 'pthread_main_np()', which prints a 'not implemented'
message. Calling 'check_dev_tty()' doesn't seem to be necessary, so this
patch removes the call.
Issue #815.
Previous commit denies the creation of regions larger then the dataspace.
Noux does it by setting the default size to the dataspace size without
subtracting the offset.
Fixes#591
Forgetting to restore the old utcb content results in hard to debug bugs.
Save only the amount of word items which are actually on the UTCB.
Issue #806
Avoids the message
cxx: operator delete (void *) called - not implemented. A working implementation is available in the 'stdcxx' library
during a " new ..." which causes exceptions. Happens for seoul in disk.cc
Issue #806
Split the netperf run script into 3 ones so that it can be used more easily
in an automated run.
netperf.run - use native nic driver (x86) or usb2.0 (arndale, panda)
netperf_usb30.run - use native nic driver (x86) or usb3.0
netperf_bridge.run - use native nic driver (x86) or usb3.0 (arndale) and bridge
Issue #794
Sometimes the ports are not freed up quick enough by the host system after the
first test finished. The port restriction is mainly required for qemu, so don't
use it for bare metal hardware tests.
lwip reports via getsockopt the size of the default size of the receive buffer
to the netperf server. lwip returns 2GB and netperf server uses this value to
allocate some buffers - which of course fails with out of memory.
Reduces the "default size" to some smaller value.
With the commit we are not forced anymore to (but still can) use specific
netperf client options regarding memory allocations of the receive buffer.
MAERTS is STREAM backwards and effectively lets the netserver sends the packets
to the netperf client. So, TCP_STREAM measure the receive performance of the
lwIP stack on Genode and TCP_MAERTS the send performance of the lwIP stack
on Genode.
The PWD variable contains the current working directory of the original
location where 'make -C' is executed, not the directory specified as
argument of '-C'. The tools referenced by ports/libports, however,
expect PWD to point to the root of the respective repository.
