Commit Graph

128 Commits

Author SHA1 Message Date
Christian Prochaska
4f9be09643 Arora: add gallium.lib.so boot module
QtGui depends on gallium now, so gallium.lib.so needs to be available as
boot module.

Fixes #992.
2014-01-27 18:54:05 +01:00
Alexander Boettcher
05ad5a6ad4 noux: adjust timeouts for diverse platforms
Issue #996
2013-12-09 10:49:16 +01:00
Martin Stein
9c698ab6c1 noux_tool_chain_auto & hw_arndale: adjust timeouts
As hw_arndale is a bit slower than foc_arm and spawn_serial timing
calculation has changed in general, timeouts of noux_tool_chain_auto test
must be adjusted.

fix #996
2013-12-03 18:05:10 +01:00
Alexander Boettcher
9b456fb3be run: spelling fix 2013-12-03 10:40:23 +01:00
Christian Helmuth
c05a80a139 netperf: move check for qemu to netperf.inc 2013-12-03 10:40:22 +01:00
Martin Stein
8514eecc90 noux_tool_chain.inc: remove trailing whitespaces
ref #964
2013-12-03 08:33:26 +01:00
Martin Stein
51db6a6056 noux_terminal_fs: remove bad bracket in run script
ref #964
2013-12-03 08:33:25 +01:00
Martin Stein
a2e6fdd922 noux_shell_script: platform driver and usb input
Provide platform driver and USB input driver in run/noux_shell_script
if they are needed.

ref #964
2013-12-03 08:33:25 +01:00
Alexander Boettcher
aca62c7180 noux: enable some arm platforms running tool_chain
ref #964
2013-12-03 08:33:24 +01:00
Sebastian Sumpf
54667241f7 usb_drv: Use GPIO driver on PandaBoard
Also updated run scripts.

Issue #708
2013-11-26 14:32:06 +01:00
Sebastian Sumpf
634f4c0d8c netperf: Add separate run scripts for lwip/lxip
Also removed target 'app/netperf' and added 'app/netperf/lwip' and
'app/netperf/lxip'.
2013-11-26 14:32:06 +01:00
Sebastian Sumpf
5e17fef898 lxip: Port of the Linux TCP/IP stack 2013-11-26 14:32:05 +01:00
Alexander Boettcher
44c7d64fb3 netperf: remove packet/s from statistics
Mixing MB/s and packet/s in one graph is a bit confusing - so remove it from
the graph, but is still in the log output.
2013-11-25 12:12:31 +01:00
Alexander Boettcher
f00195e26d seoul: support to run VM outside VMM's PD
Issue #949

Related to issue #808 - one way to nearly double the maximum VM size for
VMs on 32bit Genode/Nova host if decreased performance is acceptable.
2013-11-25 12:12:31 +01:00
Norman Feske
1df48b8331 ports: common utilities for building VMMs on NOVA
To ease the creation of custom virtual machine monitors on top of
NOVA, this patch moves generic utilities from vancouver resp. seoul to the
public include location 'ports/include/vmm'. As a nice side effect,
this change simplifies 'vancouver/main.cc'.

Issue #949
2013-11-25 12:12:31 +01:00
Josef Söntgen
9bc42ecd87 ports: native version of DosBox
DosBox is DOS-Emulator which is mainly used for playing old
DOS games on POSIX systems and newer Windows versions.

This port of DosBox runs natively on Genode by using its
SDL backend. It is currently only works on x86_*.

Fixes #937.
2013-11-14 19:54:14 +01:00
Norman Feske
1ed4b9fef9 Use log_terminal in noux.run script
This patch changes the noux.run script to use the new log_terminal
component instead of an UART driver. Besides being a nice way to test
the log_terminal service, the new version is much simpler and it just
became compatible to Linux as it no longer relies on an UART driver.

Issue #947
2013-11-12 17:59:29 +01:00
Christian Prochaska
a1458307da GDB monitor: test the 'set var' and 'call' commands
Fixes #930.
2013-10-29 18:08:29 +01:00
Christian Prochaska
27aeecf5d1 cli_monitor: add a 'gdb' command
This patch adds a 'gdb' command to 'cli_monitor', which makes it possible
to debug an application with GDB.

The command works similarly to the 'start' command, but instead of
starting the subsystem binary directly, an 'init' subsystem gets
started, which then starts 'terminal_crosslink', 'noux', GDB and
'gdb_monitor' (which starts the application binary as its target).

So, for the 'gdb' command to work, these additional components need to
be available, too. 'terminal_crosslink', 'noux', 'gdb_monitor' and the
file 'gdb_command_config' are expected to be ROM modules. The Noux GDB
client needs to get mounted at '/bin' in Noux and the target binaries need
to be available as ROM modules (loaded by 'gdb_monitor') and also mounted
at '/gdb' in Noux (loaded by the GDB client).
Additionally, the source code of the target application can be provided
at '/gdb/src/ in Noux. How the Noux mountings get established can
be configured in the 'gdb_command_config' file. The default configuration
in 'os/src/server/cli_monitor/gdb_command_config' mounts GDB from a tar
archive named 'gdb.tar', the GDB target binaries from a tar archive named
'gdb_target.tar' and the target source code from a tar archive named
'gdb_target-src.tar'.

The patch includes an 'expect' include file (ports/run/noux_gdb.inc)
which provides functions that help to create those tar files:

- 'create_gdb_tar' creates a tar archive for the 'gdb' client
- 'create_binary_tar' creates a tar archive for the target application
- 'create_source_tar' creates a tar archive for the source code of
  the target application
- 'create_binary_and_source_tars' is a convenience wrapper for the previous
  two functions

The patch also includes an example run script
(ports/run/noux_gdb_dynamic.run).

The 'gdb' command supports the following command line options:

- --ram: the initial RAM quota provided to the whole subsystem
         (including the GDB-related components)
- --ram-limit: limit for expanding RAM quota
- --gdb-ram-preserve: the RAM quota that 'gdb_monitor' ahould preserve
                      for itself

Fixes #928.
2013-10-29 18:08:29 +01:00
Christian Prochaska
047d851fb6 Noux: add basic 'Ctrl-C' support
This patch implements the POSIX signal functionality needed to interrupt a
running Noux GDB by pressing 'Ctrl-C'.

It allows to register a signal handler for the 'SIGINT' signal, which
gets executed after 'Ctrl-C' is received from the terminal. With the
current state of the implementation, the signal handler only gets executed
when the Noux application calls a 'read()', 'write()', 'ftruncate()' or
'select()' syscall.

Fixes #923.
2013-10-22 08:00:16 +02:00
Stefan Kalkowski
8f0c789ed4 Make NIC RX/TX buffer sizes configureable in libc
* Remove far too low default values from Nic::Connection constructor
* Extend lwip initialization function with desired TX/RX buffer sizes
* Add configuration possibility to libc_lwip_dhcp plugin to define
  buffer sizes, like the following:

  '<libc tx_buf_size="1M" tx_buf_size="1M"/>'

Fixes #892
2013-10-22 08:00:14 +02:00
Martin Stein
ee5d213c1f base: do not allow unnamed threads
fix #901
2013-10-22 08:00:07 +02:00
Alexander Boettcher
d8cf17687e run: use gdb_monitor by autopilot
Issue #478
2013-10-16 09:26:09 +02:00
Christian Helmuth
0d5d74fec6 netperf: enable netperf_bridge test on linux
Statically configured NIC bridge clients must be configured via
<policy...> nodes in the config. Otherwise, the bridge can't answer ARP
requests or route traffic.
2013-09-23 14:26:01 +02:00
Norman Feske
29eeedf064 launchpad: Update config syntax, remove defaults
This patch updates the launchpad config to use XML attributes and
removes the built-in default configuration (which is only meaningful
for demo.run anyway).
2013-09-23 14:25:59 +02:00
Alexander Boettcher
380aa387d4 Adjust tcp_terminal quota
Nic_bridge requires more memory.
2013-09-18 14:58:54 +02:00
Christian Helmuth
4febaff66e netperf: netperf w/ static ip address on linux
The netperf test configures the target Genode system for with
10.0.2.55/24. Also, nic_drv on base-linux uses the virtual ethernet
device 'tap0', which must be configured for the test user and network
address 10.0.2.1/24 on the test host like follows.

  tunctl -t tap0 -u <user running test>
  ip address add 10.0.2.1/24 dev tap
  ip link set tap0 up
2013-09-06 15:05:38 +02:00
Norman Feske
3d5f77599f Adjust nic_bridge quota for netperf tests 2013-09-06 11:24:38 +02:00
Norman Feske
7cbec0e915 Adjust nic_bridge quota in noux_net_netcat.run 2013-09-06 11:23:07 +02:00
Norman Feske
7b3dd51771 Blacklist noux_tool_chain run scripts on Linux 2013-09-06 11:13:19 +02:00
Norman Feske
24e2310c36 seoul: Adjust nic_bridge quota 2013-09-05 12:28:48 +02:00
Christian Prochaska
5b8965cde9 GDB monitor: move GDB commands into separate file
This patch moves the GDB commands to set a breakpoint in the 'main()'
function into a separate file that can be included from other run scripts.

Fixes #876.
2013-09-04 22:43:47 +02:00
Christian Prochaska
3ca14f53fe Noux GDB: resolve '..' in run script
If the path of a Genode source file (as extracted from the binary test
application) contains a part like '/a/b/../' where '/a' exists, but '/a/b'
does not exist anymore, 'tar' complains. With this patch, the run script
normalizes the path before calling 'tar'.

Fixes #875.
2013-09-04 22:43:29 +02:00
Alexander Boettcher
773b0ecc3d noux: add verbose config parameter
Explicitly enable verbose output if required.
2013-08-22 15:13:12 +02:00
Alexander Boettcher
9cf315b37e noux: start time measuring with first noux output
Don't account the boottime to the actual compile time - since it varies quite
a lot if somebody else utilize the network with lwip tests for example ;-).
2013-08-22 15:13:12 +02:00
Alexander Boettcher
6dd6525b48 seoul: support headless mode
+ run kernelbuild in headless mode, output dumped via serial output
2013-08-22 11:33:10 +02:00
Alexander Boettcher
90823eaf1d run: remove files of seoul-auto script 2013-08-22 09:03:29 +02:00
Alexander Boettcher
baa55dabc4 seoul: add kernelbuild run script 2013-08-15 09:22:49 +02:00
Alexander Boettcher
e349c29736 seoul: add test for native runs
and add to autopilot list.
2013-08-15 09:22:48 +02:00
Alexander Boettcher
35f9ceb7ba seoul: fix run script issues 823 and 824
Fix #823
Fix #824
2013-08-15 09:22:48 +02:00
Christian Prochaska
7b54eaaee1 libports: add Qt5
Fixes #345.
2013-08-13 17:27:40 +02:00
Alexander Boettcher
fa7329a3e6 run: remove duplicated include in seoul-fancy
Fixes #820
2013-08-13 17:08:24 +02:00
Josef Söntgen
b5739fc520 ports: add grep and sed to noux_tool_chain
Fixes #821
2013-08-13 17:08:23 +02:00
Alexander Boettcher
9b6d37649b run: restrict noux-auto to platforms known to work
* add to autopilot list

Issue #591
2013-08-05 15:16:11 +02:00
Alexander Boettcher
4e8d0618bb seoul: split vancouver run script into smaller ones
Issue #806
2013-07-18 11:55:17 +02:00
Alexander Boettcher
ff0eb93569 run: dump output of noux_net_netcat
Issue #742
2013-07-16 17:26:55 +02:00
Stefan Kalkowski
ef4027a7a8 Disable noux run script for i.MX53 platform
This platform misses necessary UART driver support.
2013-07-11 12:44:24 +02:00
Alexander Boettcher
86d323d3cf run: disable network tests for imx53
We have no network driver on this platform by now.
2013-07-11 12:44:24 +02:00
Alexander Boettcher
05d807db75 run: split native Genode netperf script
Split the netperf run script into 3 ones so that it can be used more easily
in an automated run.

netperf.run        - use native nic driver (x86) or usb2.0 (arndale, panda)
netperf_usb30.run  - use native nic driver (x86) or usb3.0
netperf_bridge.run - use native nic driver (x86) or usb3.0 (arndale) and bridge

Issue #794
2013-07-11 11:01:37 +02:00
Alexander Boettcher
400037a5b0 run: check for netperf version in user environment
For native Genode netperf port.
2013-07-09 18:57:30 +02:00