This commit introduces the means to configure the framebuffer memory
used by the driver for sizing its buffers.
Originally the avail memory was derived from the avail ram in the PD
session, which roughly corresponds to configured RAM quota.
However, since it is only used in a virtual capacity, we can decouple
it from the actual memory and set to a value that accommodates larger
framebuffer resolutions like 3840x2160. If the configured RAM quota
is not enough to satisfy an allocation request the client will issue
a resource request.
Issue #5174.
These generated dummies slipped in when the commit
'pc_linux: enable gpio, audio' got merged and mainly concern old devices
from the 6xxx series.
The functions are normally guarded via 'CONFIG_IWLWIFI_LEDS' but due to
the olddefconfig step when generating our pc_linux config using
LX_DISABLE has no effect.
Issue #5066.
When the kernel does interrupt remapping, we cannot get a non-remapped MSI
for fault event interrupts. We therefore let the kernel do the fault
reporting in this case.
genodelabs/genode#5066
Only with high-resolution timers enabled timouts can fire between two
jiffies. The option is enabled on all relevant platforms but
unfortunately disabled by tinyconfig.
This option also permits the use of CONFIG_SND_HRTIMER.
Replace the USB session API by one that provides a devices ROM only,
which contains information about all USB devices available for this client,
as well as methods to acquire and release a single device.
The acquisition of an USB device returns the capability to a device session
that includes a packet stream buffer to communicate control transfers
in between the client and the USB host controller driver. Moreover,
additional methods to acquire and release an USB interface can be used.
The acquisition of an USB interface returns the capability to an interface
session that includes a packet stream buffer to communicate either
bulk, interrupt, or isochronous transfers in between the client and the
USB host controller driver.
This commit implements the API changes in behalf of the Genode C API's
USB server and client side. Addtionally, it provides Usb::Device,
Usb::Interface, and Usb::Endpoint utilities that can be used by native
C++ clients to use the new API and hide the sophisticated packet stream API.
The adaptations necessary target the following areas:
* lx_emul layer for USB host and client side
* Linux USB host controller driver port for PC
* Linux USB client ports: usb_hid_drv and usb_net_drv, additionally
reduce the Linux tasks used inside these drivers
* Native usb_block_drv
* black_hole component
* Port of libusb, including smartcard and usb_webcam driver depending on it
* Port of Qemu XHCI model library, including vbox5 & vbox6 depending on it
* Adapt all run-scripts and drivers_interactive recipes to work
with the new policy rules of the USB host controller driver
Fixgenodelabs/genode#5021
The classes Genode::Mmio, Genode::Register_set, Genode::Attached_mmio, and
Platform::Device::Mmio now receive a template parameter 'size_t SIZE'. In each
type that derives from one of these classes, it is now statically checked that
the range of each Genode::Register::Register- and
Genode::Register_set::Register_array-deriving sub-type is within [0..SIZE).
That said, SIZE is the minimum size of the memory region provided to the above
mentioned Mmio classes in order to avoid page faults or memory corruption when
accessing the registers and register arrays declared inside.
Note, that the range end of a register array is not the end of the last item
but the end of integer access that is used for accessing the last bit in the
last item.
The constructors of Genode::Mmio, Genode::Attached_mmio, and
Platform::Device::Mmio now receive an argument 'Byte_range_ptr range' that is
expected to be the range of the backing memory region. In each type that derives
from on of these classes, it is now dynamically checked that 'range.num_bytes
>= SIZE', thereby implementing the above mention protection against page faults
and memory corruption.
The rest of the commit adapts the code throughout the Genode Labs repositories
regarding the changes. Note that for that code inside Core, the commits mostly
uses a simplified approach by constructing MMIO objects with range
[base..base+SIZE) and not with a mapping- or specification-related range size.
This should be fixed in the future.
Furthermore, there are types that derive from an MMIO class but don't declare
any registers or register arrays (especially with Platform::Device::Mmio). In
this case SIZE is set to 0. This way, the parameters must be actively corrected
by someone who later wants to add registers or register arrays, plus the places
can be easily found by grep'ing for Mmio<0>.
Fix#4081
Functions registered with 'module_init' (i.e., '__define_initcalls'),
'OF_DECLARE', and 'DECLARE_PCI_FIXUP_CLASS_FINAL' used to be static
constructors and had be explicitly registered using
'exec_static_constructors' before executing any Linux code.
With this commit we remove the constructor attributes from these
functions and create a global function pointer in the form of
__initptr_<name>_<id>_<counter>_<line number of macro>
'import-lx_emul_common.inc' will collect these '__initptr' symbols after
the compile step and generate a 'lx_emul_register_initcalls' function
that executes the functions pointed to. This step is now automatically
performed in 'lx_emul_start_kernel'. This way a call to
'exec_static_constructors' can be omitted in case there are no other
constructors in place.
issue #5096
The management of Linux page structs is now tied to the life time of DMA
buffers. Thus, page structs are created when a buffer is allocated and
deallocated only when a buffer is freed - not on lx_emul_mem_free()
because DMA buffers are cached. Page struct refcounting was entirely
reworked in lx_emul/shadow/mm/page_alloc.c.
Fixes#4809
The devio API in the Linux kernel promised to be a stable layer for our
USB host controller drivers, but the additional bookkeeping and dynamic
allocations increase CPU overhead in a way that we do not accept further.
Therefore, we go a step back and process DMA transactions directly in and
out of the packet stream from the clients.
Fixgenodelabs/genode#5071
Up to now, when using force_*, all other configured modes of a connector
got overwritten and the force_* got enforced. With the commit,
the connector mode is considered (if below max_*) and the resulting
framebuffer may be larger then the dimension of force_*.
Differences in TAR archive member metadata results in unstable depot
hashes. The following properties have to be fixed: modification time
(incl. time zone), numeric owner and group, permission modes.
Releated to #2842
If all connectors are set to disabled by configuration, the connectors
stayed enabled since the new configuration reveals no preferred or minimal
resolution/mode. Instead, use the last set resolution in order to get to the
disabling code.
