* add "or later" to GPLv2 license header where possible in order to make
it compatible with GPLv3 based licenses
* add license header to non-trivial files where missing
fixes#5486
* instead of sending packet-stream signals for each possible rx/tx packet
via genode_nic_client_notify_peers, call the wakeup_remote callback
which implements the Vfs::Remote_io interface in vfs/ip.
genode_nic_client_notify_peers will only be called in case the vfs goes idle.
measured speed up: TX x9.1, RX x1.6
* retrieve genode_socket_info from Linux ipconfig.c
issue #5471
When emitting TOUCH_RELEASE events, we have to make sure that the
release events refer to the corresponding ID of the preceding TOUCH
event(s).
Fixes#5446
This commit alignes the implementation to the intention of dismissing
invalid '<network>' entries. We only accept entries when they contain
a valid SSID and additionally a valid PSK if the network is protected.
Issue #5356.
Register Global_irq_controller as Device so interrupts get forwarded to
irqchip.c code. Otherwise, pin-controller interrupts will get lost.
Fixed#5363
Related #5356
This commit does away with controlling the join-intent via an attribute
but couples it to the existence of a '<network>' node. With this change
all '<network>' nodes within the configuration are always
unconditionally considered for joining.
Issue #5356.
This commit splits the intent to scan for a hidden network and the
actual configuration of a network itself by introducing
'<explicit_scan>' nodes. Like the '<network>' node these also feature
a 'ssid' attribute and each node is incorporated into the SCAN request
if its SSID is valid.
For more information please consult 'repos/src/driver/wifi/README'.
Issue #5356.
Call lx_emul_setup arch after kmem_cache_init, because
unflatten_device_tree requires 'memblock_alloc' which does not work
when using native slub.c/memblock.c on ARM platforms.
issue #5264
This commit streamlines the interaction between the Wifi::Manager
and the wpa_supplicant's CTRL interface.
As user-facing changes it alters some default settings and introduces
new features:
* Every configured network now needs to explicitly have its
'auto_connect' (to be considered an option for joining) attribute
set to 'true' whereas this was previously the default value if the
attribute was not set at all.
* The 'log_level' attribute is added and configures the supplicant's
verbosity. Valid values correspond to levels used by the supplicant
and are as follows 'excessive', 'msgdump', 'debug', 'info', 'warning'
and 'error'. The default value is 'error' and configures the least
amount of verbosity.
* The 'bgscan' attribute may be used to configure the way the
supplicant performs background-scanning to steer or rather optimize
roaming decision within the same network. The default value is set
to 'simple:30:-70:600'. It can be disabled by specifying an empty
value, e.g. 'bgscan=""'.
* The 'verbose_state' attribute was removed alltogether and similar
functionality is now coverted by 'verbose' attribute.
Implementation-wise the internals changed significantly and are
outlined in the following paragraphs.
Formerly the interaction between the manager and the supplicant
was handled in an apparent way where the internal state of each
interaction was in plain sight. This made the flow cumbersome to
follow and therefor each interaction is now confined to its own
'Action' object that encapsulates the ping-pong of commands and
responses between the manager and the supplicant. All actions are
processed in an sequential way and thus there is no longer any
need to defer pending actions depending on the interal state of
the current interaction. Configuration changes as well as events
issued by the supplicant where new actions can be created are
handled in this fashion. Of note are both signal-handlers,
'_handle_cmds' and '_handle_events' respectively.
The state report, which provides the information about the current
state of connectivity to a given wireless network, was dealt with
in the same vein and its handling was spread across the manager
implementation. Again, to make it easier to follow, the generation
of the state report is now purely driven by the 'Join_state' object.
This object encapsulates the state of connectivity and is normally
updated by events issued from the supplicant (see '_handle_events').
It is also incorporated when handling command responses (see
'_handle_cmds').
Handling of timed-actions, like scan and signal quality
update requests, was done by setting a timeout at the Timer session
directly and thus only one timed-action could be pending at any time.
This excluded dealing with timed-actions like connected-scanning
and signal quality polling concurrently. This was changed and now
a One_shot_timeout is used to programm each concurrent timed-action.
For implementing the communication channel for the CTRL interface the
manager and supplicant use a shared memory buffer, the Msg_buffer.
Since the CTRL interface for Genode was implemented using C, some
shenanigans were performed to access the memory buffer. Now the
CTRL interface implementation uses C++ and only exports the functions
required by the supplicant as C. This simplifies the usage of the
Msg_buffer and allows for removing the global functions needed for
synchronizing the Msg_buffer access as those are now part of the
object itself via the 'Notify_interface'.
Fixes#5341.
The 'convert_errno_from_linux' function was already used internally to
convert the Linux errno values to the matching FreeBSD libc ones when
calling socket functions.
It will now also be used to convert the error values included in
netlink messages as those, naturally, also correspond to the Linux
ones.
Issue #5341.
Now, we schedule before unblocking the rx_task. This is done in order to
execute a potentially ready ksoftirqd before unblocking the rx_task,
which in turn may execute soft-interrupt handlers through bottom half
code leading to double lock attempts of the socket spinlock.
Issue #5264
The commit that added firmware loading via the VFS (see #4861)
introduces a double-free bug where the memory that contains the
image is freed twice, once from the callback and once from the
work function.
As alle examined drivers call 'release_firmware' from the callback
function themselves, remove the erroneous 'kfree' call from the
work function.
Issue #5264.
This commit introduces support for querying and updating the signal
quality of the established connection to the current accesspoint.
By setting the 'update_quality_interval' to a non-zero value specified
in seconds the 'state' report will be updated to incorporate the
current signal quality. It uses the same approximation as is already
in use by the scan results.
Fixes#5262.
Unmasking of a pending interrupt did not lead to immediate IRQ handler
execution in all cases.
This commit also addresses some style concerns risen during the issue
discussion.
- Replace multi-boolean IRQ state by state enum
- EOI and ACK should be same in DDE context
- Unify x86 and ARM irqchip.c
- Remove Pending_irq type
- Remove dde_irq_set_wake()
Fixes#5164
The use of the Linux-internal SLUB allocator is supported by lx_emul and
drivers may now decide between the Linux implementation or our emulation
of kmem_cache. Drivers for pc and virt already use SLUB, while other
drivers still use the emulation and may be adapted step-by-step incl.
the testing on the devices.
Fixes#5236
The Fn key on keyboards should never be reported as real scancode event,
as it is just a hardware switch that changes the reported scancodes of
other keys. The behavior of Linux hid-apple.c is wrong as it on one hand
reports different scancodes for the same hard key depending on the Fn
state but sends the Fn press and release events too. Thus from now on,
we just drop KEY_FN events for all drivers as otherwise, scancodes
generated generated by Fn+key combinations would never be single-key
events on upper layers, for example KEY_FN + KEY_F12 on the Matias Apple
keyboard clone in the fixed issue.
Fixes#5288
With libxml2 >= 2.13, the `-path` argument can no longer be used for
setting search paths for xsd files. Instead, we use an XML catalog to
replace genode:// URIs with absolute paths.
Fixes#5248
So far, this test used dynamic_rom for the re-configuration of the nic router
and tested for the expected ping results by inspecting the log with the run
tool. However, this approach had two issues:
* Timing differs significantly on different targets and so the dynamic_rom had
the difficult task of compensating with heuristics without bloating the test
duration too much.
* In case of a failing test, it was difficult to determine the cause as the
test kept running and produced output for quite some time and there was also
no specific error message but only a generic timeout.
These two issues are now fixed by introducing a test component that listens to
the ping-result report and manages the nic router configuration. The new
component exits early on failure and provides information on the error
circumstances. Furthermore, the component advances to the next test step only
after having seen the expected result of the active test step and thereby
removes the need for heuristics about target timing.
Fixes#5192
