The namespace draws a clear line between the base library and the core
component.
It is declared at the new core-local header <types.h>, which is expected
to be included by all code of the core component. It is thereby a
natural place for kernel-agnostic general types like commonly used C++
utilities.
Fixes#4777
Tracing must be inhibited in attach/detach as RPC trace points may
trigger attachment of trace dataspaces, which would result in nested
mutex acquisition.
This prevents errors in test-trace_logger like follows.
[init -> depot_autopilot] 0.140 [init -> dynamic_rom] Error: deadlock ahead, mutex=0x500e6f00, return ip=0x50053ed7
Fixes#4607
The 'base-linux' API is used by hybrid Genode/Linux programs for the
lx_hybrid library. This API archive happend to contain other libraries -
like seccomp - that are solely needed for building core. With the change
of the build system in issue #4599, the build system would attempt to
build all libraries instead of merely the library dependencies of the
available targets. Hence, it would trigger the build of, e.g., the
seccomp library for each user of the base-linux API.
This patch avoids these superfluous build steps by pruning the content
of lib/mk/ to the libraries actually needed for lx_hybrid users.
Issue #4599
The official way to obtain DMA addresses for RAM dataspaces is
the RPC function 'Pd_session::dma_addr' now. User-level device drivers
should not call this function directly but use the 'Platform_session'
interface of the platform driver instead.
Fixes#2243
This patch enhances the PD-session interface with the support needed for
user-level device drivers performing DMA. Both RPC functions are
intended for the direct use by the platform driver only. If invoked for
PDs that lack the managing-system role, the operations have no effect.
The 'dma_addr()' RPC function allows the platform driver to request the
DMA address of a given RAM dataspace. It is meant to replace the
'Dataspace::phys_addr' RPC function.
The 'attach_dma' RPC function adds the given dataspace to the device
PD's I/O page table. It replaces the former heuristics of marking DMA
buffers as uncached RAM on x86.
With this patch, the UNCACHED attribute of RAM dataspaces is no longer
used to distinguish DMA buffers from regular RAM dataspaces.
Issue #2243
This patch changes the 'Allocator' interface to the use of 'Attempt'
return values instead of using exceptions for propagating errors.
To largely uphold compatibility with components using the original
exception-based interface - in particluar use cases where an 'Allocator'
is passed to the 'new' operator - the traditional 'alloc' is still
supported. But it existes merely as a wrapper around the new
'try_alloc'.
Issue #4324
This patch replaces the 'Ram_allocator::alloc' RPC function by a
'try_alloc' function, which reflects errors as 'Attempt' return value
instead of an exception.
Issue #4322
Issue #3612
When rebasing my local branch on top of sculpt-21.10 tag I've noticed
two problems.
The code in new_delete.cc does not include new header file. This works
fine with GCC, but fails with clang because std::align_val_t type is
not defined anywhere according to clang. It looks like GCC pulls this
header indirectly somehow.
The second problem can be seen if one disallows undefined symbols in
executables and shared_libraries. This can be seen with both GCC and
clang by adding --no-undefined to LD_OPT. With such change in place core
fails to link due to:
ld.lld: error: undefined symbol: operator delete(void*, std::align_val_t)
>>> referenced by thread.h:448 (/home/tworaz/devel/genode/repos/base-hw/src/core/kernel/thread.h:448)
>>> thread.o:(Kernel::Core_main_thread::~Core_main_thread()) in archive debug/core-hw-virt_qemu.a
>>> referenced by thread.h:448 (/home/tworaz/devel/genode/repos/base-hw/src/core/kernel/thread.h:448)
>>> thread.o:(non-virtual thunk to Kernel::Core_main_thread::~Core_main_thread()) in archive debug/core-hw-virt_qemu.a
>>> did you mean: operator delete(void*, unsigned long, std::align_val_t)
>>> defined in: debug/core-hw-virt_qemu.a(supc++.o)
If the code would somehow manage call such undefined symbol it'd crash.
Since I generally prefer link time failures to runtime crashes I link
all genode binaries with --no-undefined.
To fix this problem just add a dummy implementation of missing delete
operator.
Fixes#4298
Introduce two new cache maintainance functions:
* cache_clean_invalidate_data
* cache_invalidate_data
used to flush or invalidate data-cache lines.
Both functions are typically empty, accept for the ARM architecture.
The commit provides implementations for the base-hw kernel, and Fiasco.OC.
Fixes#4207
Enable watching files via the inotify interface of the Linux Kernel.
Delivery of watches to components is staggered in order to prevent an
overflow of the ACK queue in cases when a lot of changes are made to the
file system from the Linux side.
Fixes#4070
The kernel-agnostic 'Trace::timestamp' function for arm_64 executes the
'mrs %0, pmccntr_el0' instruction, which is not permitted for user-level
programs on Linux. This patch shadows the generic timestamp.h header
with dummy that returns zero. This return value prompts the timeout
framework to disable the interpolation of time based on timestamps. This
avoid the illegal-instruction abort but comes with two llimitations:
First, time measurements are effectlively limited to a granulariry of 1
millisecond (deliberately constrained by the timer driver).
The quirk is applied when using the base-linux API. Should a generic
application (that uses the base API only) call 'Trace::timestamp'
directly, the illegal instruction is executed.
Issue #4136
This patch adds support for running Genode/Linux on the AARCH64
architecture.
- The kernel-agnostic startup code (crt0) had to be extended to
capture the initial stack pointer, which the Linux kernel uses
to pass the process environment. This is in line with the
existing startup code for x86_32 and x86_64.
- The link order of the host libraries linked to lx_hybrid
programs had to be adjusted such that libgcc appears at last
because the other libraries depend on symbols provided by
libgcc.
- When using AARCH64 Linux as host, one can execute run scripts
via 'make run/<script> KERNEL=linux BOARD=linux' now.
Issue #4136
By moving core's build-description to a library - a pattern already
employed for the other base platforms - we become able to cleanly split
x86-specific code (I/O-port access) from generic code. This is a
prerequisite for enabling non-x86 architectures such as AARCH64.
Issue #4136
Until now, Genode's Linux system call bindings were based on original
Unix system calls that were later superseded by more flexibile variants.
E.g., 'openat' is a modern version of 'open'. Even though Linux upholds
the compatiblity with the original versions for existing architectures
like x86, the legacy syscalls are absent for the recently added AARCH64
architecture. A good overview of the system calls accross the prominent
architectures can be found at
https://chromium.googlesource.com/chromiumos/docs/+/master/constants/syscalls.md
This patch updates Genode's syscall bindings to avoid legacy versions,
thereby easing the support for AARCH64. The used "modern" versions
were introduced back in Linux version 2 days. So we are fine to rely
on them.
The patch slightly changes the signature for lx_stat because this system
call is merely used to check for the existance of a file and its size.
The new name 'lx_stat_size' draws a closer connection to its use case.
That said, the stat syscall has not been updated to the modern statx
since statx is still a fairly recent addition.
Issue #4136
This patch simplifies the use of the clone system call for creating
processes and threads. Until now, the binding used an opaque pointer
argument to pass context information to the newly created process or
thread. However, upon close inspection, this is not a strict
requirement.
A newly created thread accesses its contextual information by
using its stack pointer as key. The pointer argument is not used.
The creation of processes is strictly serialized because the
intermediate stack used in-between clone and execve is a global
variable. Since we rely on the serialization anyway, we can pass the
context information of a new process via a global variable as well.
This change simplifies the syscall binding for the upcoming AARCH64
support, which would otherwise require us to deal with the notion
of TLS on Linux.
Issue #4136
This patch changes the 'alloc_aligned' interface as follows:
- The former 'from' and 'to' arguments are replaced by a single
'range' argument.
- The distinction of the use cases of regular allocations vs.
address-constrained allocations is now overed by a dedicated
overload instead of relying on a default argument.
- The 'align' argument has been changed from 'int' to 'unsigned'
to be better compatible with 'addr_t' and 'size_t'.
Fixes#4067
According to GNU as manual the syntax of this directive is:
.cfi_undefined register
The manual does not mention the register should be in parentheses.
This works in GNU as even when those are present, but unfortunately
clang integrated-as does not parse this correctly. Both GNU and
clang's integrated assembler work fine when the extra parentheses
are omitted.
Fixes#3986
* Remove SPEC declarations from mk/spec
* Remove all board-specific REQUIRE declaratiions left
* Replace [have_spec <board>] run-script declarations with have_board where necessary
* Remove addition of BOARD variable to SPECS in toplevel Makefile
* Move board-specific directories in base-hw out of specs
The _root, _gid and _uid private member variables are not used for
anything. GCC does not care, but clang likes to complain about things
like this.
Issue #3938
- base/cancelable_lock.h becomes base/lock.h
- all members become private within base/lock.h
- solely Mutex and Blockade are friends to use base/lock.h
Fixes#3819
base-linux uses seccomp to reduce the available system calls
to the minimum set needed to run base-linux. There are still
some syscalls that allow accessing global state which should
be further reduced.
The combination of seccomp and socket descriptor caps should
provide an intermediate level of security for base-linux
thereby enabling base-linux as a migration path from using
the Linux kernel to the use of microkernel-based Genode.
Fixes#3581
Add the option to configure the RAM quota for core on base-linux.
The environment variable GENODE_RAM_QUOTA if it exists is interpreted
as number of bytes to provide to the first init.
Issue #3762
- Since Genode::strncpy is not 100% compatible with the POSIX
strncpy function, better use a distinct name.
- Remove bogus return value from the function, easing the potential
enforcement of mandatory return-value checks later.
Fixes#3752
This patch largely reverts the commit "base: lay groundwork for
base-linux caps change" because the use of 'epoll' instead of 'select'
alleviated the need to allocate large FD sets, which motivated the
introduction of the 'Native_context' hook.
Related to issue #3581
