The NIC router used to send an ICMP "Destination Unreachable" packet as
response to every unroutable IPv4 packet. However, RFC 1812 section 4.3.2.7
defines certain properties that must be fullfilled by an incoming packet in
order to be answered with this type of ICMP. One requirement is that the packet
is no IPv4 multicast.
This commit prevents sending the mentioned ICMP response for unroutable IPv4
multicasts and instead drops them silently.
Fixes#4563
This patch allows the leitzentrale subsystem to control an audio driver
hosted in the drivers subsystem. An example use case is the toggling of
the speaker during phone calls.
Instead of having a generic "virt_qemu" board use "virt_qemu_<arch>" in
order to have a clean distinction between boards. Current supported
boards are "virt_qemu_arm_v7a", "virt_qemu_arm_v8a", and
"virt_qemu_riscv".
issue #4034
Define custom analyses that can be imported into TraceCompass (>= 7.3)
for evaluating the traced component interactions and checkpoints.
genodelabs/genode#4352
The NIC router used to add the DNS servers field to DHCP replies regardless of
whether there were DNS servers or not. As reported by a Genode user, the empty
DNS server field irritated at least Windows 10 guests (Vbox 6) that connected
to the NIC router. This resulted in Windows 10 ignoring DHCP offers from the
router with such characteristic.
With this commit adding the DNS server DHCP option is skipped if there are no
DNS servers at the corresponding DHCP server or the domain IP config the server
shall fetch its DNS servers from.
Fixes#4581
Skip SET_CONFIGURATION requests if the device already has the selected
config as active config. This workaround prevents issues with Linux
guests in VirtualBox and SDC-reader passthrough.
Thanks to Peter for the patch.
The commit introduces means to mark a task for destruction that is
removed on the next scheduling cycle. This fixes stack leakage from
dynamic kworker tasks.
Issue #4575.
Provide additional PCI register information inside the pci-config part
of the devices ROM for clients able to access an Intel graphic card,
namely the GMCH control register content, which contains for instance
the GTT size and stolen memory size.
Ref genodelabs/genode#4578
Implement BIOS handover and Intel resume register update
apart from device driver to circumvent export of PCI
config space to drivers.
Ref genodelabs/genode#4578
The pci_decode has to extract the additional fields from the PCI configuration
space. The platform driver again has to parse and forward the knowledge too.
The PCI BAR indices are exported when info="yes" is set in the policy node for
the corresponding session.
Fixgenodelabs/genode#4577
The base address of I/O ports has a different encoding than
those of I/O memory. This needs to be encountered in the PCI
config helper utilities.
Fixgenodelabs/genode#4576
Under high TX load, 'irq_handler()' is rarely executed but packets
are still received since 'netdev_poll()' is called for every TX packet.
'netdev_poll()' not only handles completed transmissions but also
puts the IO buffers of received packets into the RX queue and refills the RX
ring by allocating more IO buffers. However, the IO buffers can only be freed
after they have been dequeued and passed to the 'rx_callback()'. Since
this was only done by 'irq_handler()', we exhaust the slab allocator
under high TX load.
A fix for this is to process the RX queue not only in the IRQ handler
but also when transmitting packets.
genodelabs/genode#4555
m/udelay is called with closed interrupts. Linux contrib code expects no
other task to be run respectively to be re-scheduled. usleep_range leads to
executing other tasks, which causes assertions in "spinlock taken twice" or
"unexpected preempt count" errors, seen on runtime with wifi_drv and intel_fb.
The assertion triggered with the changes by #4562.
On okl4, pistachio, sel4 the test didn't come up fast enough in order to still
experience the first configuration of NIC router #1. This commit doubles the
lifetime of the first configuration of NIC router #1 to 4 seconds and raises
the overall test timeout accordingly.
Ref #4555
* Move common SMP and NO_HZ_IDLE variables and functions into
generic lx_emul shadow implementations, and integrate them
into the common lx_emul import rules
* Enable SMP and NO_HZ_IDLE within virt_linux kernel configuration
* Adapt pc drivers and wireguard accordingly
* Use original Linux softirq implementation in wireguard
* Remove erroneous softirq shadow implementation
Ref genodelabs/genode#4540
Ref genodelabs/genode#4562
In overload situations, i.e. when a sender fills up the entire buffer, we land
in situations where the sender receives an ack_avail signal, releases one
packet, allocates and sends a packet and fails to allocate a second packet.
This is especially relevant if the receiver does not batch ack_avail signals
(such as vfs_lwip). In those ping-pong scheduling scenarios, the overhead from
catching the Packet_alloc_failed exception becomes significant. In case of the
NIC router, we will land in an overload situation if the sender is faster than
the receiver. The packet buffer will be filled up at some point and the NIC
router starts to drop packets. For every dropped packet, we currently have to
catch the Packet_alloc_failed exception.
This commit adds a new method alloc_packet_attempt to Packet_stream_source that
has almost the same signature as the older alloc_packet method but returns
an Attempt<Packet_descriptor, Alloc_packet_error> object. As the method already
used the allocator back end exception-less, changes on lower levels were not
needed. Furthermore, the NIC router was modified to use the new exception-less
alloc_packet_attempt instead of alloc_packet.
Ref #4555
Replaces the former implementation of the 'find_by_ip' method at the data
structure for ARP cache entries. This method used to return a reference to the
found object and threw an exception if no matching object was found.
The new implementation doesn't return anything and doesn't throw exceptions. It
takes two lambda arguments instead. One for handling the case that a match was
found with a reference to the matching object as argument and another for
handling the case that no object matches.
This way, expensive exception handling can be avoided and object references
stay in a local scope.
Ref #4555
According to a benchmarking series on Zynq (base-hw) and x260 (base-nova) using
test-nic_perf_router, increasing the 'max_packets_per_signal' has a significant
effect on the packet throughput. By increasing the default value from 32
to 150, we could gain a few hundred Mbit/s. Increasing the value further
does not seem to have such a strong effect, though.
genodelabs/genode#4555
