mirror of
https://github.com/crosstool-ng/crosstool-ng.git
synced 2024-12-23 14:42:26 +00:00
5324905c14
While here, also consider patched by anything other than "bundled patches" as per-target sources. Add scary warnings in case of a failure. Signed-off-by: Alexey Neyman <stilor@att.net>
705 lines
30 KiB
Bash
705 lines
30 KiB
Bash
# Copyright 2007 Yann E. MORIN
|
|
# Licensed under the GPL v2. See COPYING in the root of this package.
|
|
|
|
# This is the main entry point to crosstool
|
|
# This will:
|
|
# - download, extract and patch the toolchain components
|
|
# - build and install each components in turn
|
|
# - and eventually test the resulting toolchain
|
|
|
|
# What this file does is prepare the environment, based upon the user-choosen
|
|
# options. It also checks the existing environment for un-friendly variables,
|
|
# and builds the tools.
|
|
|
|
# Parse the common functions
|
|
# Note: some initialisation and sanitizing is done while parsing this file,
|
|
# most notably:
|
|
# - set trap handler on errors,
|
|
# - don't hash commands lookups,
|
|
. "${CT_LIB_DIR}/scripts/functions"
|
|
|
|
# Read the sample settings
|
|
CT_LoadConfig
|
|
|
|
# Yes! We can do full logging from now on! Clean any old log file content.
|
|
CT_LogEnable clean=yes
|
|
|
|
# Check running as root
|
|
if [ -z "${CT_ALLOW_BUILD_AS_ROOT_SURE}" ]; then
|
|
if [ $(id -u) -eq 0 ]; then
|
|
CT_DoLog ERROR "You must NOT be root to run crosstool-NG"
|
|
exit 1
|
|
fi
|
|
fi
|
|
|
|
# If we want an interactive debug-shell, we must ensure these FDs
|
|
# are indeed connected to a terminal (and not redirected in any way).
|
|
if [ "${CT_DEBUG_INTERACTIVE}" = "y" -a ! \( -t 0 -a -t 6 -a -t 2 \) ]; then
|
|
CT_DoLog ERROR "Can't spawn interactive debug-shell,"
|
|
CT_DoLog ERROR "because stdout/stderr has been redirected."
|
|
exit 1
|
|
fi
|
|
|
|
CT_TrapEnvExport
|
|
|
|
# Override the locale early, in case we ever translate crosstool-NG messages
|
|
if [ -z "${CT_NO_OVERRIDE_LC_MESSAGES}" ]; then
|
|
export LC_ALL=C
|
|
export LANG=C
|
|
fi
|
|
|
|
# remove . from PATH since it can cause gcc build failures
|
|
CT_SanitizePath
|
|
|
|
# Some sanity checks in the environment and needed tools
|
|
CT_DoLog INFO "Performing some trivial sanity checks"
|
|
CT_TestAndAbort "Don't set LD_LIBRARY_PATH. It screws up the build." -n "${LD_LIBRARY_PATH+set}"
|
|
CT_TestAndAbort "Don't set LIBRARY_PATH. It screws up the build." -n "${LIBRARY_PATH+set}"
|
|
CT_TestAndAbort "Don't set LPATH. It screws up the build." -n "${LPATH+set}"
|
|
CT_TestAndAbort "Don't set CPATH. It screws up the build." -n "${CPATH+set}"
|
|
CT_TestAndAbort "Don't set C_INCLUDE_PATH. It screws up the build." -n "${C_INCLUDE_PATH+set}"
|
|
CT_TestAndAbort "Don't set CPLUS_INCLUDE_PATH. It screws up the build." -n "${CPLUS_INCLUDE_PATH+set}"
|
|
CT_TestAndAbort "Don't set OBJC_INCLUDE_PATH. It screws up the build." -n "${OBJC_INCLUDE_PATH+set}"
|
|
CT_TestAndAbort "Don't set CFLAGS. It screws up the build." -n "${CFLAGS+set}"
|
|
CT_TestAndAbort "Don't set CXXFLAGS. It screws up the build." -n "${CXXFLAGS+set}"
|
|
CT_TestAndAbort "Don't set CC. It screws up the build." -n "${CC+set}"
|
|
CT_TestAndAbort "Don't set CXX. It screws up the build." -n "${CXX+set}"
|
|
CT_Test "GREP_OPTIONS screws up the build. Unsetting." -n "${GREP_OPTIONS+set}"
|
|
unset GREP_OPTIONS
|
|
# Workaround against openSUSE 12.1 that breaks ./configure for cross-compilation:
|
|
export CONFIG_SITE=
|
|
|
|
# Some sanity checks on paths content
|
|
for d in \
|
|
LOCAL_TARBALLS \
|
|
WORK \
|
|
PREFIX \
|
|
INSTALL \
|
|
; do
|
|
eval dir="\${CT_${d}_DIR}"
|
|
case "${dir}" in
|
|
*" "*)
|
|
CT_Abort "'CT_${d}_DIR'='${dir}' contains a space in it.\nDon't use spaces in paths, it breaks things."
|
|
;;
|
|
*:*)
|
|
CT_Abort "'CT_${d}_DIR'='${dir}' contains a colon in it.\nDon't use colons in paths, it breaks things."
|
|
;;
|
|
*,*)
|
|
CT_Abort "'CT_${d}_DIR'='${dir}' contains a comma in it.\nDon't use commas in paths, it breaks things."
|
|
;;
|
|
esac
|
|
done
|
|
|
|
# Where will we work?
|
|
CT_WORK_DIR="${CT_WORK_DIR:-${CT_TOP_DIR}/.build}"
|
|
CT_BUILD_DIR="${CT_BUILD_TOP_DIR}/build"
|
|
CT_DoExecLog ALL mkdir -p "${CT_WORK_DIR}"
|
|
CT_DoExecLog DEBUG rm -f "${CT_WORK_DIR}/backtrace"
|
|
|
|
# Check build file system case-sensitiveness
|
|
CT_DoExecLog DEBUG touch "${CT_WORK_DIR}/foo"
|
|
CT_TestAndAbort "Your file system in '${CT_WORK_DIR}' is *not* case-sensitive!" -f "${CT_WORK_DIR}/FOO"
|
|
CT_DoExecLog DEBUG rm -f "${CT_WORK_DIR}/foo"
|
|
|
|
# Check the user is using an existing SHELL to be used by ./configure and Makefiles
|
|
CT_TestOrAbort "The CONFIG_SHELL '${CT_CONFIG_SHELL}' is not valid" -f "${CT_CONFIG_SHELL}" -a -x "${CT_CONFIG_SHELL}"
|
|
|
|
# Create the bin-override early
|
|
# Contains symlinks to the tools found by ./configure
|
|
# Note: CT_DoLog and CT_DoExecLog do not use any of those tool, so
|
|
# they can be safely used
|
|
CT_TOOLS_OVERRIDE_DIR="${CT_WORK_DIR}/tools"
|
|
CT_DoLog DEBUG "Creating bin-override for tools in '${CT_TOOLS_OVERRIDE_DIR}'"
|
|
CT_DoExecLog DEBUG mkdir -p "${CT_TOOLS_OVERRIDE_DIR}/bin"
|
|
cat "${CT_LIB_DIR}/paths.sh" |while read trash line; do
|
|
tool="${line%%=*}"
|
|
# Suppress extra quoting
|
|
eval path=${line#*=}
|
|
if [ -r "${CT_LIB_DIR}/scripts/override/$tool" ]; then
|
|
tmpl="${CT_LIB_DIR}/scripts/override/$tool"
|
|
else
|
|
tmpl="${CT_LIB_DIR}/scripts/override/__default"
|
|
fi
|
|
CT_DoLog DEBUG "Creating script-override for '${tool}' -> '${path}' using '${tmpl}' template"
|
|
CT_DoExecLog ALL cp "${tmpl}" "${CT_TOOLS_OVERRIDE_DIR}/bin/${tool}"
|
|
CT_DoExecLog ALL ${sed} -i -r \
|
|
-e "s#@CONFIG_SHELL@#${CT_CONFIG_SHELL}#g" \
|
|
-e "s#@TOOL_PATH@#${path}#g" \
|
|
-e "s#@TOOLS_OVERRIDE_DIR@#${CT_TOOLS_OVERRIDE_DIR}#g" \
|
|
"${CT_TOOLS_OVERRIDE_DIR}/bin/${tool}"
|
|
CT_DoExecLog ALL chmod 700 "${CT_TOOLS_OVERRIDE_DIR}/bin/${tool}"
|
|
done
|
|
export PATH="${CT_TOOLS_OVERRIDE_DIR}/bin:${PATH}"
|
|
|
|
# Start date. Can't be done until we know the locale
|
|
# Also requires the bin-override tools
|
|
CT_STAR_DATE=$(CT_DoDate +%s%N)
|
|
CT_STAR_DATE_HUMAN=$(CT_DoDate +%Y%m%d.%H%M%S)
|
|
|
|
# Log real begining of build, now
|
|
CT_DoLog INFO "Build started ${CT_STAR_DATE_HUMAN}"
|
|
|
|
CT_DoStep DEBUG "Dumping user-supplied crosstool-NG configuration"
|
|
CT_DoExecLog DEBUG ${grep} -E '^(# )?CT_' .config
|
|
CT_EndStep
|
|
|
|
CT_DoLog DEBUG "Unsetting MAKEFLAGS"
|
|
unset MAKEFLAGS
|
|
|
|
# Set the shell to be used by ./configure scripts and by Makefiles (those
|
|
# that support it!).
|
|
export CONFIG_SHELL="${CT_CONFIG_SHELL}" # for ./configure
|
|
export SHELL="${CT_CONFIG_SHELL}" # for Makefiles
|
|
|
|
CT_DoLog INFO "Building environment variables"
|
|
|
|
# Sanity check some directories
|
|
CT_TestAndAbort "'CT_PREFIX_DIR' is not set: where should I install?" -z "${CT_PREFIX_DIR}"
|
|
|
|
# Avoid multiple '/' in the prefix dir, it breaks relocatability
|
|
CT_PREFIX_DIR="$( ${sed} -r -e 's:/+:/:g; s:/*$::;' <<<"${CT_PREFIX_DIR}" )"
|
|
|
|
# Second kludge: merge user-supplied target CFLAGS with architecture-provided
|
|
# target CFLAGS. Do the same for LDFLAGS in case it happens in the future.
|
|
# Put user-supplied flags at the end, so that they take precedence.
|
|
CT_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_TARGET_CFLAGS}"
|
|
CT_TARGET_LDFLAGS="${CT_ARCH_TARGET_LDFLAGS} ${CT_TARGET_LDFLAGS}"
|
|
CT_CC_GCC_CORE_EXTRA_CONFIG_ARRAY=( ${CT_ARCH_CC_CORE_EXTRA_CONFIG} "${CT_CC_GCC_CORE_EXTRA_CONFIG_ARRAY[@]}" )
|
|
CT_CC_GCC_EXTRA_CONFIG_ARRAY=( ${CT_ARCH_CC_EXTRA_CONFIG} "${CT_CC_GCC_EXTRA_CONFIG_ARRAY[@]}" )
|
|
|
|
# Compute the package version string
|
|
CT_PKGVERSION="crosstool-NG ${CT_VERSION}${CT_TOOLCHAIN_PKGVERSION:+ - ${CT_TOOLCHAIN_PKGVERSION}}"
|
|
|
|
# Compute the working directories names
|
|
CT_TARBALLS_DIR="${CT_WORK_DIR}/tarballs"
|
|
CT_COMMON_SRC_DIR="${CT_WORK_DIR}/src"
|
|
CT_SRC_DIR="${CT_BUILD_TOP_DIR}/src"
|
|
CT_BUILDTOOLS_PREFIX_DIR="${CT_BUILD_TOP_DIR}/buildtools"
|
|
CT_STATE_DIR="${CT_WORK_DIR}/${CT_TARGET}/state"
|
|
# Note about HOST_COMPLIBS_DIR: it's always gonna be in the buildtools dir, or a
|
|
# sub-dir. So we won't have to save/restore it, not even create it.
|
|
# In case of cross or native, host-complibs are used for build-complibs;
|
|
# in case of canadian or cross-native, host-complibs are specific
|
|
# Note about BUILD_COMPTOOLS_DIR: if installing companion tools for "host" in
|
|
# a native or simple cross, we can can use the same binaries we built for
|
|
# "build". However, we need companion tools for "build" early - as other
|
|
# components may depend on them - so we may skip building for "host" rather
|
|
# than for "build" in that case.
|
|
case "${CT_TOOLCHAIN_TYPE}" in
|
|
native|cross)
|
|
CT_HOST_COMPLIBS_DIR="${CT_BUILDTOOLS_PREFIX_DIR}"
|
|
if [ -n "${CT_COMP_TOOLS_FOR_HOST}" ]; then
|
|
CT_BUILD_COMPTOOLS_DIR="${CT_PREFIX_DIR}"
|
|
else
|
|
CT_BUILD_COMPTOOLS_DIR="${CT_BUILDTOOLS_PREFIX_DIR}"
|
|
fi
|
|
;;
|
|
canadian|cross-native)
|
|
CT_HOST_COMPLIBS_DIR="${CT_BUILDTOOLS_PREFIX_DIR}/complibs-host"
|
|
CT_BUILD_COMPTOOLS_DIR="${CT_BUILDTOOLS_PREFIX_DIR}"
|
|
;;
|
|
esac
|
|
|
|
# Compute test suite install directory
|
|
CT_TEST_SUITE_DIR=${CT_PREFIX_DIR}/test-suite
|
|
|
|
# We must ensure that we can restart if asked for!
|
|
if [ -n "${CT_RESTART}" -a ! -d "${CT_STATE_DIR}" ]; then
|
|
CT_DoLog ERROR "You asked to restart a non-restartable build"
|
|
CT_DoLog ERROR "This happened because you didn't set CT_DEBUG_CT_SAVE_STEPS"
|
|
CT_DoLog ERROR "in the config options for the previous build, or the state"
|
|
CT_DoLog ERROR "directory for the previous build was deleted."
|
|
CT_Abort "I will stop here to avoid any carnage"
|
|
fi
|
|
|
|
# If the local tarball directory does not exist, say so, and don't try to save there!
|
|
if [ "${CT_SAVE_TARBALLS}" = "y" \
|
|
-a ! -d "${CT_LOCAL_TARBALLS_DIR}" ]; then
|
|
CT_DoLog WARN "Directory '${CT_LOCAL_TARBALLS_DIR}' does not exist."
|
|
CT_DoLog WARN "Will not save downloaded tarballs to local storage."
|
|
CT_SAVE_TARBALLS=
|
|
fi
|
|
|
|
# Check now if we can write to the destination directory:
|
|
if [ -d "${CT_PREFIX_DIR}" ]; then
|
|
CT_TestAndAbort "Destination directory '${CT_PREFIX_DIR}' is not removable" ! -w $(dirname "${CT_PREFIX_DIR}")
|
|
fi
|
|
|
|
# Good, now grab a bit of informations on the system we're being run on,
|
|
# just in case something goes awok, and it's not our fault:
|
|
CT_SYS_USER=$(id -un)
|
|
CT_SYS_HOSTNAME=$(hostname -f 2>/dev/null || true)
|
|
# Hmmm. Some non-DHCP-enabled machines do not have an FQDN... Fall back to node name.
|
|
CT_SYS_HOSTNAME="${CT_SYS_HOSTNAME:-$(uname -n)}"
|
|
CT_SYS_KERNEL=$(uname -s)
|
|
CT_SYS_REVISION=$(uname -r)
|
|
CT_SYS_OS=$(uname -s)
|
|
CT_SYS_MACHINE=$(uname -m)
|
|
CT_SYS_PROCESSOR=$(uname -p)
|
|
CT_SYS_GCC=$(${CT_BUILD_PREFIX}gcc${CT_BUILD_SUFFIX} -dumpversion)
|
|
CT_SYS_TARGET=$(CT_DoConfigGuess)
|
|
CT_TOOLCHAIN_ID="crosstool-${CT_VERSION} build ${CT_STAR_DATE_HUMAN} by ${CT_SYS_USER}@${CT_SYS_HOSTNAME}"
|
|
|
|
# Adjust the list of multilibs, if needed
|
|
CT_DoArchMultilibList
|
|
|
|
CT_DoLog EXTRA "Preparing working directories"
|
|
|
|
# Ah! The build directory shall be eradicated, even if we restart!
|
|
# Ditto for the build tools install dir
|
|
CT_DoForceRmdir "${CT_BUILD_DIR}" "${CT_BUILDTOOLS_PREFIX_DIR}"
|
|
|
|
# Don't eradicate directories if we need to restart
|
|
if [ -z "${CT_RESTART}" ]; then
|
|
# Per-target sources: eliminate
|
|
CT_DoForceRmdir "${CT_SRC_DIR}"
|
|
# Get rid of pre-existing installed toolchain and previous build directories.
|
|
if [ "${CT_FORCE_DOWNLOAD}" = "y" -a -d "${CT_TARBALLS_DIR}" ]; then
|
|
CT_DoForceRmdir "${CT_TARBALLS_DIR}"
|
|
fi
|
|
if [ "${CT_FORCE_EXTRACT}" = "y" -a -d "${CT_COMMON_SRC_DIR}" ]; then
|
|
CT_DoForceRmdir "${CT_COMMON_SRC_DIR}"
|
|
fi
|
|
if [ -d "${CT_PREFIX_DIR}" -a "${CT_RM_RF_PREFIX_DIR}" = "y" ]; then
|
|
CT_DoForceRmdir "${CT_PREFIX_DIR}"
|
|
fi
|
|
# In case we start anew, get rid of the previously saved state directory
|
|
if [ -d "${CT_STATE_DIR}" ]; then
|
|
CT_DoForceRmdir "${CT_STATE_DIR}"
|
|
fi
|
|
fi
|
|
|
|
# Create the directories we'll use, even if restarting: it does no harm to
|
|
# create already existent directories, and CT_BUILD_DIR needs to be created
|
|
# anyway
|
|
CT_DoExecLog ALL mkdir -p "${CT_TARBALLS_DIR}"
|
|
CT_DoExecLog ALL mkdir -p "${CT_COMMON_SRC_DIR}"
|
|
CT_DoExecLog ALL mkdir -p "${CT_SRC_DIR}"
|
|
CT_DoExecLog ALL mkdir -p "${CT_BUILD_DIR}"
|
|
CT_DoExecLog ALL mkdir -p "${CT_BUILDTOOLS_PREFIX_DIR}/bin"
|
|
CT_DoExecLog ALL mkdir -p "${CT_PREFIX_DIR}"
|
|
CT_DoExecLog ALL mkdir -p "${CT_HOST_COMPLIBS_DIR}"
|
|
|
|
# Only create the state dir if asked for a restartable build
|
|
[ -n "${CT_DEBUG_CT_SAVE_STEPS}" ] && CT_DoExecLog ALL mkdir -p "${CT_STATE_DIR}"
|
|
|
|
# Check install file system case-sensitiveness
|
|
CT_DoExecLog DEBUG touch "${CT_PREFIX_DIR}/foo"
|
|
CT_TestAndAbort "Your file system in '${CT_PREFIX_DIR}' is *not* case-sensitive!" -f "${CT_PREFIX_DIR}/FOO"
|
|
CT_DoExecLog DEBUG rm -f "${CT_PREFIX_DIR}/foo"
|
|
|
|
# Kludge: CT_PREFIX_DIR might have grown read-only if
|
|
# the previous build was successful.
|
|
CT_DoExecLog ALL chmod -R u+w "${CT_PREFIX_DIR}"
|
|
|
|
# Setting up the rest of the environment only if not restarting
|
|
if [ -z "${CT_RESTART}" ]; then
|
|
# Having .. inside CT_PREFIX breaks relocatability.
|
|
CT_SanitizeVarDir CT_PREFIX_DIR
|
|
|
|
case "${CT_SYSROOT_NAME}" in
|
|
"") CT_SYSROOT_NAME="sysroot";;
|
|
.) CT_Abort "Sysroot name is set to '.' which is forbidden";;
|
|
*' '*) CT_Abort "Sysroot name contains forbidden space(s): '${CT_SYSROOT_NAME}'";;
|
|
*/*) CT_Abort "Sysroot name contains forbidden slash(es): '${CT_SYSROOT_NAME}'";;
|
|
esac
|
|
|
|
# Arrange paths depending on whether we use sysroot or not.
|
|
if [ "${CT_USE_SYSROOT}" = "y" ]; then
|
|
CT_SYSROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}/${CT_SYSROOT_DIR_PREFIX}/${CT_SYSROOT_NAME}"
|
|
CT_DEBUGROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}/${CT_SYSROOT_DIR_PREFIX}/debug-root"
|
|
CT_HEADERS_DIR="${CT_SYSROOT_DIR}/usr/include"
|
|
CT_SanitizeVarDir CT_SYSROOT_DIR CT_DEBUGROOT_DIR CT_HEADERS_DIR
|
|
CT_BINUTILS_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
|
|
CT_CC_CORE_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
|
|
CT_CC_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
|
|
# glibc's prefix must be exactly /usr, else --with-sysroot'd gcc will get
|
|
# confused when $sysroot/usr/include is not present.
|
|
# Note: --prefix=/usr is magic!
|
|
# See http://www.gnu.org/software/libc/FAQ.html#s-2.2
|
|
else
|
|
# plain old way. All libraries in prefix/target/lib
|
|
CT_SYSROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}"
|
|
CT_DEBUGROOT_DIR="${CT_SYSROOT_DIR}"
|
|
CT_HEADERS_DIR="${CT_SYSROOT_DIR}/include"
|
|
CT_SanitizeVarDir CT_SYSROOT_DIR CT_DEBUGROOT_DIR CT_HEADERS_DIR
|
|
# hack! Always use --with-sysroot for binutils.
|
|
# binutils 2.14 and later obey it, older binutils ignore it.
|
|
# Lets you build a working 32->64 bit cross gcc
|
|
CT_BINUTILS_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
|
|
# Use --with-headers, else final gcc will define disable_glibc while
|
|
# building libgcc, and you'll have no profiling
|
|
CT_CC_CORE_SYSROOT_ARG="--without-headers"
|
|
CT_CC_SYSROOT_ARG="--with-headers=${CT_HEADERS_DIR}"
|
|
fi
|
|
CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}"
|
|
CT_DoExecLog ALL mkdir -p "${CT_DEBUGROOT_DIR}"
|
|
CT_DoExecLog ALL mkdir -p "${CT_HEADERS_DIR}"
|
|
|
|
# Need the non-multilib directories: GCC's multi-os-directory is based off them, so
|
|
# even if the /lib is not used for any of the multilibs, it must be present so that
|
|
# the paths like 'lib/../lib64' still work.
|
|
CT_DoExecLog ALL mkdir -p "${CT_PREFIX_DIR}/lib"
|
|
CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}/lib"
|
|
CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}/usr/lib"
|
|
|
|
# Determine build system if not set by the user
|
|
if [ -z "${CT_BUILD}" ]; then
|
|
CT_BUILD=$(CT_DoConfigGuess)
|
|
fi
|
|
|
|
# Prepare mangling patterns to later modify BUILD and HOST (see below)
|
|
case "${CT_TOOLCHAIN_TYPE}" in
|
|
cross)
|
|
# A cross-compiler runs on the same machine it is built on
|
|
CT_HOST="${CT_BUILD}"
|
|
build_mangle="build_"
|
|
host_mangle="build_"
|
|
target_mangle=""
|
|
install_build_tools_for="BUILD"
|
|
;;
|
|
canadian)
|
|
build_mangle="build_"
|
|
host_mangle="host_"
|
|
target_mangle=""
|
|
install_build_tools_for="BUILD HOST"
|
|
;;
|
|
*) CT_Abort "No code for '${CT_TOOLCHAIN_TYPE}' toolchain type!"
|
|
;;
|
|
esac
|
|
|
|
# Save the real tuples to generate shell-wrappers to the real tools
|
|
CT_REAL_BUILD="${CT_BUILD}"
|
|
CT_REAL_HOST="${CT_HOST}"
|
|
CT_REAL_TARGET="${CT_TARGET}"
|
|
|
|
# Canonicalise CT_BUILD and CT_HOST
|
|
# Not only will it give us full-qualified tuples, but it will also ensure
|
|
# that they are valid tuples (in case of typo with user-provided tuples)
|
|
# That's way better than trying to rewrite config.sub ourselves...
|
|
# CT_TARGET is already made canonical in CT_DoBuildTargetTuple
|
|
CT_BUILD=$(CT_DoConfigSub "${CT_BUILD}")
|
|
CT_HOST=$(CT_DoConfigSub "${CT_HOST}")
|
|
|
|
# Modify BUILD and HOST so that gcc always generate a cross-compiler
|
|
# even if any of the build, host or target machines are the same.
|
|
# NOTE: we'll have to mangle the (BUILD|HOST)->TARGET x-compiler to
|
|
# support canadain build, later...
|
|
CT_BUILD="${CT_BUILD/-/-${build_mangle}}"
|
|
CT_HOST="${CT_HOST/-/-${host_mangle}}"
|
|
CT_TARGET="${CT_TARGET/-/-${target_mangle}}"
|
|
|
|
# Now we have mangled our BUILD and HOST tuples, we must fake the new
|
|
# cross-tools for those mangled tuples.
|
|
CT_DoLog DEBUG "Making build system tools available"
|
|
for m in ${install_build_tools_for}; do
|
|
r="CT_REAL_${m}"
|
|
v="CT_${m}"
|
|
p="CT_${m}_PREFIX"
|
|
s="CT_${m}_SUFFIX"
|
|
if [ -n "${!p}" ]; then
|
|
t="${!p}"
|
|
else
|
|
t="${!r}-"
|
|
fi
|
|
|
|
for tool in ar as dlltool gcc g++ gcj gnatbind gnatmake ld nm objcopy objdump ranlib strip windres; do
|
|
# First try with prefix + suffix
|
|
# Then try with prefix only
|
|
# Then try with suffix only, but only for BUILD, and HOST iff REAL_BUILD == REAL_HOST
|
|
# Finally try with neither prefix nor suffix, but only for BUILD, and HOST iff REAL_BUILD == REAL_HOST
|
|
# This is needed, because some tools have a prefix and
|
|
# a suffix (eg. gcc), while others may have only one,
|
|
# or even none (eg. binutils)
|
|
where=$(CT_Which "${t}${tool}${!s}")
|
|
[ -z "${where}" ] && where=$(CT_Which "${t}${tool}")
|
|
if [ -z "${where}" \
|
|
-a \( "${m}" = "BUILD" \
|
|
-o "${CT_REAL_BUILD}" = "${!r}" \) ]; then
|
|
where=$(CT_Which "${tool}${!s}")
|
|
fi
|
|
if [ -z "${where}" \
|
|
-a \( "${m}" = "BUILD" \
|
|
-o "${CT_REAL_BUILD}" = "${!r}" \) ]; then
|
|
where=$(CT_Which "${tool}")
|
|
fi
|
|
|
|
# Not all tools are available for all platforms, but some are required.
|
|
if [ -n "${where}" ]; then
|
|
CT_DoLog DEBUG " '${!v}-${tool}' -> '${where}'"
|
|
printf "#${BANG}${CT_CONFIG_SHELL}\nexec '${where}' \"\${@}\"\n" >"${CT_BUILDTOOLS_PREFIX_DIR}/bin/${!v}-${tool}"
|
|
CT_DoExecLog ALL chmod 700 "${CT_BUILDTOOLS_PREFIX_DIR}/bin/${!v}-${tool}"
|
|
else
|
|
case "${tool}" in
|
|
# We'll at least need some of them...
|
|
ar|as|gcc|ld|nm|objcopy|objdump|ranlib)
|
|
CT_Abort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!"
|
|
;;
|
|
# Some are conditionnally required
|
|
# Add them in alphabetical (C locale) ordering
|
|
g++)
|
|
# g++ (needed for companion lib), only needed for HOST
|
|
CT_TestAndAbort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!" "${m}" = "HOST"
|
|
;;
|
|
gcj)
|
|
CT_TestAndAbort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!" "${CT_CC_LANG_JAVA}" = "y"
|
|
;;
|
|
strip)
|
|
CT_TestAndAbort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!" "${CT_STRIP_HOST_TOOLCHAIN_EXECUTABLES}" = "y"
|
|
;;
|
|
# If any other is missing, only warn at low level
|
|
*)
|
|
# It does not deserve a WARN level.
|
|
CT_DoLog DEBUG " Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : not required."
|
|
;;
|
|
esac
|
|
fi
|
|
done
|
|
done
|
|
|
|
# Some makeinfo versions are a pain in [put your most sensible body part here].
|
|
# Go ahead with those, by creating a wrapper that keeps partial files, and that
|
|
# never fails:
|
|
CT_DoLog DEBUG " 'makeinfo' -> '$(CT_Which makeinfo)'"
|
|
printf "#${BANG}${CT_CONFIG_SHELL}\n$(CT_Which makeinfo) --force \"\${@}\"\ntrue\n" >"${CT_BUILDTOOLS_PREFIX_DIR}/bin/makeinfo"
|
|
CT_DoExecLog ALL chmod 700 "${CT_BUILDTOOLS_PREFIX_DIR}/bin/makeinfo"
|
|
|
|
# Carefully add paths in the order we want them:
|
|
# - first try in ${CT_PREFIX_DIR}/bin
|
|
# - then try the buildtools dir
|
|
# - fall back to searching user's PATH
|
|
# Of course, neither cross-native nor canadian can run on BUILD,
|
|
# so don't add those PATHs in this case...
|
|
# For native and simple cross, build==host, combine the extra CFLAGS/LDFLAGS
|
|
# supplied for both (so that it doesn't matter where the user supplied them).
|
|
case "${CT_TOOLCHAIN_TYPE}" in
|
|
cross|native)
|
|
export PATH="${CT_PREFIX_DIR}/bin:${CT_BUILDTOOLS_PREFIX_DIR}/bin:${PATH}"
|
|
bh_cflags="${CT_EXTRA_CFLAGS_FOR_BUILD} ${CT_EXTRA_CFLAGS_FOR_HOST}"
|
|
bh_ldflags="${CT_EXTRA_LDFLAGS_FOR_BUILD} ${CT_EXTRA_LDFLAGS_FOR_HOST}"
|
|
CT_EXTRA_CFLAGS_FOR_BUILD="${bh_cflags}"
|
|
CT_EXTRA_CFLAGS_FOR_HOST="${bh_cflags}"
|
|
CT_EXTRA_LDFLAGS_FOR_BUILD="${bh_ldflags}"
|
|
CT_EXTRA_LDFLAGS_FOR_HOST="${bh_ldflags}"
|
|
;;
|
|
canadian|cross-native)
|
|
export PATH="${CT_BUILDTOOLS_PREFIX_DIR}/bin:${PATH}"
|
|
# build!=host in this case
|
|
;;
|
|
*)
|
|
;;
|
|
esac
|
|
|
|
# Help build gcc
|
|
# Explicitly optimise, else the lines below will overide the
|
|
# package's default optimisation flags
|
|
CT_CFLAGS_FOR_BUILD="-O2 -g -I${CT_BUILDTOOLS_PREFIX_DIR}/include"
|
|
CT_CFLAGS_FOR_BUILD+=" ${CT_EXTRA_CFLAGS_FOR_BUILD}"
|
|
CT_LDFLAGS_FOR_BUILD="-L${CT_BUILDTOOLS_PREFIX_DIR}/lib"
|
|
CT_LDFLAGS_FOR_BUILD+=" ${CT_EXTRA_LDFLAGS_FOR_BUILD}"
|
|
|
|
case "${CT_BUILD}" in
|
|
*darwin*)
|
|
# Two issues while building on MacOS. Really, we should be checking for
|
|
# clang instead.
|
|
# - gettext static library fails to link unless CoreFoundation framework
|
|
# is included
|
|
# - ranlib on MacOS does not include common symbols into the symbol index
|
|
# for a static library, and hence linker fails to pull in the right
|
|
# archive members; hence, avoid common symbols. Alternative is to
|
|
# have ranlib wrapper in buildtools/bin supply -c option.
|
|
CT_CFLAGS_FOR_BUILD+=" -fno-common"
|
|
CT_LDFLAGS_FOR_BUILD+=" -framework CoreFoundation"
|
|
;;
|
|
esac
|
|
|
|
CT_DoLog DEBUG "CFLAGS for build compiler: '${CT_CFLAGS_FOR_BUILD}'"
|
|
CT_DoLog DEBUG "LDFLAGS for build compiler: '${CT_LDFLAGS_FOR_BUILD}'"
|
|
|
|
# Help host gcc
|
|
# Explicitly optimise, else the lines below will overide the
|
|
# package's default optimisation flags
|
|
CT_CFLAGS_FOR_HOST="-O2 -g"
|
|
[ "${CT_USE_PIPES}" = "y" ] && CT_CFLAGS_FOR_HOST+=" -pipe"
|
|
CT_CFLAGS_FOR_HOST+=" -I${CT_HOST_COMPLIBS_DIR}/include"
|
|
CT_CFLAGS_FOR_HOST+=" ${CT_EXTRA_CFLAGS_FOR_HOST}"
|
|
CT_LDFLAGS_FOR_HOST="-L${CT_HOST_COMPLIBS_DIR}/lib"
|
|
CT_LDFLAGS_FOR_HOST+=" ${CT_EXTRA_LDFLAGS_FOR_HOST}"
|
|
case "${CT_HOST}" in
|
|
*darwin*)
|
|
# Same as above, for host
|
|
CT_CFLAGS_FOR_HOST+=" -fno-common"
|
|
CT_LDFLAGS_FOR_HOST+=" -framework CoreFoundation"
|
|
;;
|
|
esac
|
|
CT_DoLog DEBUG "CFLAGS for host compiler: '${CT_CFLAGS_FOR_HOST}'"
|
|
CT_DoLog DEBUG "LDFLAGS for host compiler: '${CT_LDFLAGS_FOR_HOST}'"
|
|
|
|
# And help make go faster
|
|
JOBSFLAGS=
|
|
# Override the configured jobs with what's been given on the command line
|
|
if [ -n "${CT_JOBS}" ]; then
|
|
if [ ! -z "`echo "${CT_JOBS}" | ${sed} 's/[0-9]//g'`" ]; then
|
|
CT_Abort "Number of parallel jobs must be integer."
|
|
fi
|
|
CT_PARALLEL_JOBS="${CT_JOBS}"
|
|
fi
|
|
# Use the number of processors+1 when automatically setting the number of
|
|
# parallel jobs. Fall back to 1 if the host doesn't use GLIBC.
|
|
AUTO_JOBS=$((`@@CT_cpucount@@ 2>/dev/null || echo 0` + 1))
|
|
[ ${CT_PARALLEL_JOBS} -eq 0 ] && JOBSFLAGS="${JOBSFLAGS} -j${AUTO_JOBS}"
|
|
[ ${CT_PARALLEL_JOBS} -gt 0 ] && JOBSFLAGS="${JOBSFLAGS} -j${CT_PARALLEL_JOBS}"
|
|
JOBSFLAGS="${JOBSFLAGS} -l${CT_LOAD}"
|
|
|
|
# Override 'download only' option
|
|
[ -n "${CT_SOURCE}" ] && CT_ONLY_DOWNLOAD=y
|
|
|
|
# Now that we've set up $PATH and $CT_CFLAGS_FOR_HOST, sanity test that gcc
|
|
# is runnable so that the user can troubleshoot problems if not.
|
|
CT_DoStep DEBUG "Checking that we can run gcc -v"
|
|
CT_DoExecLog DEBUG "${CT_HOST}-gcc" -v
|
|
CT_EndStep
|
|
|
|
# Create a simple C program for testing.
|
|
testc="${CT_BUILD_DIR}/test.c"
|
|
printf "int main() { return 0; }\n" >"${testc}"
|
|
gccout="${CT_BUILD_DIR}/.gccout"
|
|
|
|
CT_DoStep DEBUG "Checking that gcc can compile a trivial program"
|
|
CT_DoExecLog DEBUG "${CT_HOST}-gcc" ${CT_CFLAGS_FOR_HOST} ${CT_LDFLAGS_FOR_HOST} "${testc}" -o "${gccout}"
|
|
rm -f "${gccout}"
|
|
CT_EndStep
|
|
|
|
# These tests are only enabled if we need static linking on the *build*
|
|
if [ "${CT_WANTS_STATIC_LINK}" = "y" ]; then
|
|
CT_DoStep DEBUG "Checking that gcc can compile a trivial statically linked program (CT_WANTS_STATIC_LINK)"
|
|
CT_DoLog DEBUG "You may need to ensure that static libraries such as libc.a are installed on your system"
|
|
CT_DoExecLog DEBUG "${CT_HOST}-gcc" ${CT_CFLAGS_FOR_BUILD} ${CT_LDFLAGS_FOR_BUILD} "${testc}" -static -o "${gccout}"
|
|
rm -f "${gccout}"
|
|
CT_EndStep
|
|
fi
|
|
if [ "${CT_WANTS_STATIC_LINK_CXX}" = "y" ]; then
|
|
CT_DoStep DEBUG "Checking that gcc can statically link libstdc++ (CT_WANTS_STATIC_LINK_CXX)"
|
|
CT_DoLog DEBUG "You may need to ensure that libstdc++.a is installed on your system"
|
|
CT_DoExecLog DEBUG "${CT_HOST}-gcc" ${CT_CFLAGS_FOR_BUILD} ${CT_LDFLAGS_FOR_BUILD} "${testc}" -static -lstdc++ -o "${gccout}"
|
|
rm -f "${gccout}"
|
|
CT_EndStep
|
|
fi
|
|
rm -f "${testc}"
|
|
|
|
CT_DoLog EXTRA "Installing user-supplied crosstool-NG configuration"
|
|
CT_DoExecLog ALL mkdir -p "${CT_PREFIX_DIR}/bin"
|
|
CT_DoExecLog DEBUG ${install} -m 0755 "${CT_LIB_DIR}/scripts/toolchain-config.in" "${CT_PREFIX_DIR}/bin/${CT_TARGET}-ct-ng.config"
|
|
CT_DoExecLog DEBUG ${sed} -i -e 's,@@grep@@,"'"${grep}"'",;' "${CT_PREFIX_DIR}/bin/${CT_TARGET}-ct-ng.config"
|
|
bzip2 -c -9 .config >>"${CT_PREFIX_DIR}/bin/${CT_TARGET}-ct-ng.config"
|
|
|
|
CT_DoStep EXTRA "Dumping internal crosstool-NG configuration"
|
|
CT_DoLog EXTRA "Building a toolchain for:"
|
|
CT_DoLog EXTRA " build = ${CT_REAL_BUILD}"
|
|
CT_DoLog EXTRA " host = ${CT_REAL_HOST}"
|
|
CT_DoLog EXTRA " target = ${CT_TARGET}"
|
|
set |${grep} -E '^CT_.+=' |sort |CT_DoLog DEBUG
|
|
CT_DoLog DEBUG "Other environment:"
|
|
printenv |${grep} -v -E '^CT_.+=' |CT_DoLog DEBUG
|
|
CT_EndStep
|
|
|
|
CT_DoStep INFO "Retrieving needed toolchain components' tarballs"
|
|
do_companion_tools_get
|
|
do_kernel_get
|
|
do_companion_libs_get
|
|
do_binutils_get
|
|
do_cc_get
|
|
do_libc_get
|
|
do_debug_get
|
|
do_test_suite_get
|
|
CT_EndStep
|
|
|
|
if [ "${CT_ONLY_DOWNLOAD}" != "y" ]; then
|
|
if [ "${CT_FORCE_EXTRACT}" = "y" ]; then
|
|
CT_DoForceRmdir "${CT_SRC_DIR}"
|
|
CT_DoExecLog ALL mkdir -p "${CT_SRC_DIR}"
|
|
fi
|
|
|
|
CT_DoStep INFO "Extracting and patching toolchain components"
|
|
do_companion_tools_extract
|
|
do_kernel_extract
|
|
do_companion_libs_extract
|
|
do_binutils_extract
|
|
do_cc_extract
|
|
do_libc_extract
|
|
do_debug_extract
|
|
do_test_suite_extract
|
|
CT_EndStep
|
|
fi
|
|
fi
|
|
|
|
# Now for the job by itself. Go have a coffee!
|
|
if [ "${CT_ONLY_DOWNLOAD}" != "y" -a "${CT_ONLY_EXTRACT}" != "y" ]; then
|
|
# Because of CT_RESTART, this becomes quite complex
|
|
do_stop=0
|
|
prev_step=
|
|
[ -n "${CT_RESTART}" ] && do_it=0 || do_it=1
|
|
# Aha! CT_STEPS comes from steps.mk!
|
|
for step in ${CT_STEPS}; do
|
|
if [ ${do_it} -eq 0 ]; then
|
|
if [ "${CT_RESTART}" = "${step}" ]; then
|
|
CT_DoLoadState "${step}"
|
|
do_it=1
|
|
do_stop=0
|
|
fi
|
|
else
|
|
CT_DoSaveState ${step}
|
|
if [ ${do_stop} -eq 1 ]; then
|
|
CT_DoLog INFO "Stopping just after step '${prev_step}', as requested."
|
|
exit 0
|
|
fi
|
|
fi
|
|
if [ ${do_it} -eq 1 ]; then
|
|
( do_${step} )
|
|
# POSIX 1003.1-2008 does not say if "set -e" should catch a
|
|
# sub-shell ending with !0. bash-3 does not, while bash-4 does,
|
|
# so the following line is for bash-3; bash-4 would choke above.
|
|
[ $? -eq 0 ]
|
|
# Pick up environment changes.
|
|
if [ -r "${CT_BUILD_DIR}/env.modify.sh" ]; then
|
|
CT_DoLog DEBUG "Step '${step}' modified the environment:"
|
|
CT_DoExecLog DEBUG cat "${CT_BUILD_DIR}/env.modify.sh"
|
|
. "${CT_BUILD_DIR}/env.modify.sh"
|
|
CT_DoExecLog DEBUG rm -f "${CT_BUILD_DIR}/env.modify.sh"
|
|
|
|
fi
|
|
if [ "${CT_STOP}" = "${step}" ]; then
|
|
do_stop=1
|
|
fi
|
|
if [ "${CT_DEBUG_PAUSE_STEPS}" = "y" ]; then
|
|
CT_DoPause "Step '${step}' finished"
|
|
fi
|
|
fi
|
|
prev_step="${step}"
|
|
done
|
|
fi
|
|
|
|
CT_DoEnd INFO
|
|
|
|
# From now-on, it can become impossible to log any time, because
|
|
# either we're compressing the log file, or it can become RO any
|
|
# moment...
|
|
CT_DoLog INFO "Finishing installation (may take a few seconds)..."
|
|
CT_LogDisable
|
|
rm -f ${CT_PREFIX_DIR}/build.log.bz2
|
|
if [ "${CT_LOG_TO_FILE}" = "y" ]; then
|
|
cp "${CT_BUILD_LOG}" "${CT_PREFIX_DIR}/build.log"
|
|
if [ "${CT_LOG_FILE_COMPRESS}" = y ]; then
|
|
bzip2 -9 "${CT_PREFIX_DIR}/build.log"
|
|
fi
|
|
fi
|
|
if [ "${CT_PREFIX_DIR_RO}" = "y" ]; then
|
|
chmod -R a-w "${CT_PREFIX_DIR}"
|
|
fi
|
|
# CT_TEST_SUITE_DIR may not exist if only downloading or extracting
|
|
if [ "${CT_TEST_SUITE}" = "y" -a -d "${CT_TEST_SUITE_DIR}" ]; then
|
|
chmod -R u+w "${CT_TEST_SUITE_DIR}"
|
|
fi
|
|
|
|
trap - EXIT
|