crosstool-ng/docs/5 - Using the toolchain.txt

File.........: 5 - Using the toolchain.txt
Copyright....: (C) 2010 Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
License......: Creative Commons Attribution Share Alike (CC-by-sa), v2.5


Using the toolchain  /
____________________/


Using the toolchain is as simple as adding the toolchain's bin directory in
your PATH, such as:
  export PATH="${PATH}:/your/toolchain/path/bin"

and then using the '--host' tuple to tell the build systems to use your
toolchain (if the software package uses the autotools system you should
also pass --build, for completeness):
  ./configure --host=your-host-tuple --build=your-build-tuple
or
  make CC=your-host-tuple-gcc
or
  make CROSS_COMPILE=your-host-tuple-
and so on...

(Note: in the above example, 'host' refers to the host of your program,
not the host of the toolchain; and 'build' refers to the machine where
you build your program, that is the host of the toolchain.)


Assembling a root filesystem  /
_____________________________/


Assembling a root filesystem for a target device requires the successive
building of a set of software packages for the target architecture. Building
a package potentially requires artifacts which were generated as part of an
earlier build. Note that not all artifacts which are installed as part of a
package are desirable on a target's root filesystem (e.g. man/info files,
include files, etc.). Therefore we must distinguish between a 'staging'
directory and a 'rootfs' directory.

A 'staging' directory is a location into which we install all the build
artifacts. We can then point future builds to this location so they can find
the appropriate header and library files. A 'rootfs' directory is a location
into which we place only the files we want to have on our target.

There are four schools of thought here:

1) Install directly into the sysroot of the toolchain.

   By default (i.e. if you don't pass any arguments to the tools which
   would change this behaviour) the toolchain that is built by
   crosstool-NG will only look in its toolchain directories for system
   header and library files:

#include "..." search starts here:
#include <...> search starts here:
<ct-ng install path>/lib/gcc/<host tuple>/4.5.2/include
<ct-ng install path>/lib/gcc/<host tuple>/4.5.2/include-fixed
<ct-ng install path>/lib/gcc/<host tuple>/4.5.2/../../../../<host tuple>/include
<ct-ng install path>/<host tuple>/sysroot/usr/include

   In other words, the compiler will automagically find headers and
   libraries without extra flags if they are installed under the
   toolchain's sysroot directory.

   However, this is bad because the toolchain gets poluted, and can
   not be re-used.

   $ ./configure --build=<build tuple> --host=<host tuple> \
         --prefix=/usr --enable-foo-bar...
   $ make
   $ make DESTDIR=/<ct-ng install path>/<host tuple>/sysroot install

2) Copy the toolchain's sysroot to the 'staging' area.

   If you start off by copying the toolchain's sysroot directory to your
   staging area, you can simply proceed to install all your packages'
   artifacts to the same staging area. You then only need to specify a
   '--sysroot=<staging area>' option to the compiler of any subsequent
   builds and all your required header and library files will be found/used.

   This is a viable option, but requires the user to always specify CFLAGS
   in order to include --sysroot=<staging area>, or requires the use of a
   wrapper to a few select tools (gcc, ld...) to pass this flag.

   Instead of polluting the toolchain's sysroot you are copying its contents
   to a new location and polluting the contents in that new location. By
   specifying the --sysroot option you're effectively abandoning the default
   sysroot in favour of your own.

   Incidentally this is what buildroot does using a wrapper, when using an
   external toolchain.

   $ cp -a $(<host tuple>-gcc --your-cflags-except-sysroot -print-sysroot) \
         /path/to/staging
   $ ./configure --build=<build tuple> --host=<host tuple>          \
                 --prefix=/usr --enable-foo-bar...                  \
                 CC="<host tuple>-gcc --syroot=/path/to/staging"    \
                 CXX="<host tuple>-g++ --sysroot=/path/to/staging"  \
                 LD="<host tuple>-ld --sysroot=/path/to/staging"    \
                 AND_SO_ON="tuple-andsoon --sysroot=/path/to/staging"
   $ make
   $ make DESTDIR=/path/to/staging install

3) Use separate staging and sysroot directories.

   In this scenario you use a staging area to install programs, but you do
   not pre-fill that staging area with the toolchain's sysroot. In this case
   the compiler will find the system includes and libraries in its sysroot
   area but you have to pass appropriate CPPFLAGS and LDFLAGS to tell it
   where to find your headers and libraries from your staging area (or use
   a wrapper).

   $ ./configure --build=<build tuple> --host=<host tuple>          \
                 --prefix=/usr --enable-foo-bar...                  \
                 CPPFLAGS="-I/path/to/staging/usr/include"          \
                 LDFLAGS="-L/path/to/staging/lib -L/path/to/staging/usr/lib"
   $ make
   $ make DESTDIR=/path/to/staging install

4) A mix of 2) and 3), using carefully crafted union mounts.

   The staging area is a union mount of:
      - the sysroot as a read-only branch
      - the real staging area as a read-write branch
   This also requires passing --sysroot to point to the union mount, but has
   other advantages, such as allowing per-package staging, and a few more
   obscure pros. It also has its disadvantages, as it potentially requires
   non-root users to create union mounts. Additionally, union mounts are not
   yet mainstream in the Linux kernel, so it requires patching. There is a
   FUSE-based unionfs implementation, but development is almost stalled,
   and there are a few gotchas...

   $ (good luck!)


It is strongly advised not to use the toolchain sysroot directory as an
install directory (i.e. option 1) for your programs/packages. If you do so,
you will not be able to use your toolchain for another project. It is even
strongly advised that your toolchain is chmod-ed to read-only once
successfully install, so that you don't go polluting your toolchain with
your programs'/packages' files. This can be achieved by selecting the
"Render the toolchain read-only" from crosstool-NG's "Paths and misc options"
configuration page.

Thus, when you build a program/package, install it in a separate, staging,
directory and let the cross-toolchain continue to use its own, pristine,
sysroot directory.

When you are done building and want to assemble your rootfs you could simply
take the full contents of your staging directory and use the 'populate'
script to add in the necessary files from the sysroot. However, the staging
area you have created will include lots of build artifacts that you won't
necessarily want/need on your target. For example: static libraries, header
files, linking helper files, man/info pages. You'll also need to add various
configuration files, scripts, and directories to the rootfs so it will boot.

Therefore you'll probably end up creating a separate rootfs directory which
you will populate from the staging area, necessary extras, and then use
crosstool-NG's populate script to add the necessary sysroot libraries.


The 'populate' script |
----------------------+

When your root directory is ready, it is still missing some important bits: the
toolchain's libraries. To populate your root directory with those libs, just
run:
  your-target-tuple-populate -s /your/root -d /your/root-populated

This will copy /your/root into /your/root-populated, and put the needed and only
the needed libraries there. Thus you don't pollute /your/root with any cruft that
would no longer be needed should you have to remove stuff. /your/root always
contains only those things you install in it.

You can then use /your/root-populated to build up your file system image, a
tarball, or to NFS-mount it from your target, or whatever you need.

The populate script accepts the following options:

 -s src_dir
    Use 'src_dir' as the un-populated root directory.

 -d dst_dir
    Put the populated root directory in 'dst_dir'.

 -l lib1 [...]
    Always add specified libraries.

 -L file
    Always add libraries listed in 'file'.

 -f
    Remove 'dst_dir' if it previously existed; continue even if any library
    specified with -l or -L is missing.

 -v
    Be verbose, and tell what's going on (you can see exactly where libs are
    coming from).

 -h
    Print the help.

See 'your-target-tuple-populate -h' for more information on the options.

Here is how populate works:

  1) performs some sanity checks:
     - src_dir and dst_dir are specified
     - src_dir exists
     - unless forced, dst_dir does not exist
     - src_dir != dst_dir

  2) copy src_dir to dst_dir

  3) add forced libraries to dst_dir
     - build the list from -l and -L options
     - get forced libraries from the sysroot (see below for heuristics)
       - abort on the first missing library, unless -f is specified

  4) add all missing libraries to dst_dir
     - scan dst_dir for every ELF files that are 'executable' or
       'shared object'
     - list the "NEEDED Shared library" fields
       - check if the library is already in dst_dir/lib or dst_dir/usr/lib
       - if not, get the library from the sysroot
         - if it's in sysroot/lib, copy it to dst_dir/lib
         - if it's in sysroot/usr/lib, copy it to dst_dir/usr/lib
         - in both cases, use the SONAME of the library to create the file
           in dst_dir
         - if it was not found in the sysroot, this is an error.