# Makefile.in for building crosstool-NG
# This file serves as source for the ./configure operation
# This series of test is here because GNU make 3.81 will *not* use MAKEFLAGS
# to set additional flags in the current Makfile ( see:
# http://savannah.gnu.org/bugs/?20501 ), although the make manual says it
# should ( see: http://www.gnu.org/software/make/manual/make.html#Options_002fRecursion )
# so we have to work it around by calling ourselves back if needed
# So why do we need not to use the built rules and variables? Because we
# need to generate scripts/crosstool-NG.sh from scripts/crosstool-NG.sh.in
# and there is a built-in implicit rule '%.sh:' that has neither a pre-requisite
# nor a command associated, and that built-in implicit rule takes precedence
# over our non-built-in implicit rule '%: %.in', below.
# CT_MAKEFLAGS will be used later, below...
# Do not print directories as we descend into them
ifeq ($(filter --no-print-directory,$(MAKEFLAGS)),)
CT_MAKEFLAGS += --no-print-directory
endif
# Use neither builtin rules, nor builtin variables
# Note: dual test, because if -R and -r are given on the command line
# (who knows?), MAKEFLAGS contains 'Rr' instead of '-Rr', while adding
# '-Rr' to MAKEFLAGS adds it literaly ( and does not add 'Rr' )
# Further: quad test because the flags 'rR' and '-rR' can be reordered.
ifeq ($(filter Rr,$(MAKEFLAGS)),)
ifeq ($(filter -Rr,$(MAKEFLAGS)),)
ifeq ($(filter rR,$(MAKEFLAGS)),)
ifeq ($(filter -rR,$(MAKEFLAGS)),)
CT_MAKEFLAGS += -Rr
endif # No -rR
endif # No rR
endif # No -Rr
endif # No Rr
# Remove any suffix rules
.SUFFIXES:
all: Makefile build
###############################################################################
# Configuration variables
# Stuff found by ./configure
export DATE := @DATE@
export LOCAL := @enable_local@
export PROG_SED := @program_transform_name@
export PACKAGE_TARNAME := @PACKAGE_TARNAME@
export VERSION := @PACKAGE_VERSION@
export prefix := @prefix@
export exec_prefix := @exec_prefix@
export bindir := @bindir@
export libdir := @libdir@@sublibdir@
export docdir := @docdir@@subdocdir@
export mandir := @mandir@
export datarootdir := @datarootdir@
export install := @INSTALL@
export bash := @_BASH@
export awk := @_AWK@
export grep := @GREP@
export make := @MAKE@
export sed := @SED@
export libtool := @LIBTOOL@
export libtoolize := @LIBTOOLIZE@
export objcopy := @OBJCOPY@
export objdump := @OBJDUMP@
export readelf := @READELF@
export patch := @PATCH@
export gperf := @GPERF@
export CC := @CC@
export CPP := @CPP@
export CPPFLAGS := @CPPFLAGS@
export CFLAGS := @CFLAGS@
export LDFLAGS := @LDFLAGS@
export LIBS := @LIBS@
export INTL_LIBS := @INTL_LIBS@
export curses_hdr := @ac_ct_curses_hdr@
export gettext := @gettext@
# config options to push down to kconfig
KCONFIG:= @kconfig_options@
###############################################################################
# Non-configure variables
MAN_SECTION := 1
MAN_SUBDIR := /man$(MAN_SECTION)
PROG_NAME := $(shell echo 'ct-ng' |$(sed) -r -e '$(PROG_SED)' )
###############################################################################
# Sanity checks
# Check if Makefile is up to date:
Makefile: Makefile.in
@echo "$< did changed: you must re-run './configure'"
@false
# If installing with DESTDIR, check it's an absolute path
ifneq ($(strip $(DESTDIR)),)
ifneq ($(DESTDIR),$(abspath /$(DESTDIR)))
$(error DESTDIR is not an absolute PATH: '$(DESTDIR)')
endif
endif
###############################################################################
# Global make rules
# If any extra MAKEFLAGS were added, re-run ourselves
# See top of file for an explanation of why this is needed...
ifneq ($(strip $(CT_MAKEFLAGS)),)
# Somehow, the new auto-completion for make in the recent distributions
# trigger a behavior where our Makefile calls itself recursively, in a
# never-ending loop (except on lack of ressources, swap, PIDs...)
# Avoid this situation by cutting the recursion short at the first
# level.
# This has the side effect of only showing the real targets, and hiding our
# internal ones. :-)
ifneq ($(MAKELEVEL),0)
$(error Recursion detected, bailing out...)
endif
MAKEFLAGS += $(CT_MAKEFLAGS)
build install clean distclean mrproper uninstall:
@$(MAKE) $@
else
# There were no additional MAKEFLAGS to add, do the job
TARGETS := bin lib lib-kconfig doc man
build: $(patsubst %,build-%,$(TARGETS))
install: build real-install
clean: $(patsubst %,clean-%,$(TARGETS))
distclean: clean
@echo " RM 'Makefile'"
@rm -f Makefile
mrproper: distclean
@echo " RM 'autostuff'"
@ rm -rf autom4te.cache config.log config.status configure
uninstall: real-uninstall
###############################################################################
# Specific make rules
#--------------------------------------
# Build rules
build-bin: $(PROG_NAME) \
scripts/crosstool-NG.sh \
scripts/saveSample.sh \
scripts/showTuple.sh
@chmod 755 $^
build-lib: config/configure.in \
paths.mk \
paths.sh
build-lib-kconfig:
@$(MAKE) -C kconfig
build-doc:
build-man: docs/$(PROG_NAME).1.gz
docs/$(PROG_NAME).1.gz: docs/$(PROG_NAME).1
@echo " GZIP '$@'"
@gzip -c9 $< >$@
define sed_it
@echo " SED '$@'"
@$(sed) -r -e 's,@@CT_BINDIR@@,$(bindir),g;' \
-e 's,@@CT_LIBDIR@@,$(libdir),g;' \
-e 's,@@CT_DOCDIR@@,$(docdir),g;' \
-e 's,@@CT_MANDIR@@,$(mandir),g;' \
-e 's,@@CT_PROG_NAME@@,$(PROG_NAME),g;' \
-e 's,@@CT_VERSION@@,$(VERSION),g;' \
-e 's,@@CT_DATE@@,$(DATE),g;' \
-e 's,@@CT_make@@,$(make),g;' \
-e 's,@@CT_bash@@,$(bash),g;' \
-e 's,@@CT_awk@@,$(awk),g;' \
$< >$@
endef
docs/$(PROG_NAME).1: docs/ct-ng.1.in Makefile
$(call sed_it)
$(PROG_NAME): ct-ng.in Makefile
$(call sed_it)
%: %.in Makefile
$(call sed_it)
# We create a script fragment that is parseable from inside a Makefile,
# and one from inside a shell script
paths.mk: FORCE
@echo " GEN '$@'"
@(echo 'export install=$(install)'; \
echo 'export bash=$(bash)'; \
echo 'export awk=$(awk)'; \
echo 'export grep=$(grep)'; \
echo 'export make=$(make)'; \
echo 'export sed=$(sed)'; \
echo 'export libtool=$(libtool)'; \
echo 'export libtoolize=$(libtoolize)'; \
echo 'export objcopy=$(objcopy)'; \
echo 'export objdump=$(objdump)'; \
echo 'export readelf=$(readelf)'; \
echo 'export patch=$(patch)'; \
echo 'export gperf=$(gperf)'; \
) >$@
paths.sh: FORCE
@echo " GEN '$@'"
@(echo 'export install="$(install)"'; \
echo 'export bash="$(bash)"'; \
echo 'export awk="$(awk)"'; \
echo 'export grep="$(grep)"'; \
echo 'export make="$(make)"'; \
echo 'export sed="$(sed)"'; \
echo 'export libtool="$(libtool)"'; \
echo 'export libtoolize="$(libtoolize)"'; \
echo 'export objcopy="$(objcopy)"'; \
echo 'export objdump="$(objdump)"'; \
echo 'export readelf="$(readelf)"'; \
echo 'export patch="$(patch)"'; \
echo 'export gperf="$(gperf)"'; \
) >$@
config/configure.in: FORCE
@echo " GEN '$@'"
@{ printf "# Generated file, do not edit\n"; \
printf "# Default values as found by ./configure\n"; \
for var in $(KCONFIG); do \
printf "\n"; \
printf "config CONFIGURE_$${var%%=*}\n"; \
if [ "$${var#*=}" = "y" ]; then \
printf " def_bool y\n"; \
else \
printf " bool\n"; \
fi; \
done; \
} >$@
FORCE:
#--------------------------------------
# Clean rules
clean-bin:
@echo " RM '$(PROG_NAME)'"
@rm -f $(PROG_NAME)
@echo " RM 'scripts/crosstool-NG.sh'"
@rm -f scripts/crosstool-NG.sh
@echo " RM 'scripts/saveSample.sh'"
@rm -f scripts/saveSample.sh
@echo " RM 'scripts/showTuple.sh'"
@rm -f scripts/showTuple.sh
clean-lib:
@echo " RM 'paths'"
@rm -f paths.mk paths.sh
@echo " RM 'config/configure.in'"
@rm -f config/configure.in
clean-lib-kconfig:
@$(MAKE) -C kconfig clean
clean-doc:
clean-man:
@echo " RM 'docs/$(PROG_NAME).1'"
@rm -f docs/$(PROG_NAME).1
@echo " RM 'docs/$(PROG_NAME).1.gz'"
@rm -f docs/$(PROG_NAME).1.gz
#--------------------------------------
# Check for --local setup
ifeq ($(strip $(LOCAL)),yes)
real-install:
@true
real-uninstall:
@true
else
#--------------------------------------
# Install rules
real-install: $(patsubst %,install-%,$(TARGETS)) install-post
install-bin: $(DESTDIR)$(bindir)
@echo " INST '$(PROG_NAME)'"
@$(install) -m 755 $(PROG_NAME) "$(DESTDIR)$(bindir)/$(PROG_NAME)"
# If one is hacking crosstool-NG, the patch set might change between any two
# installations of the same VERSION, thus the patches must be removed prior
# to being installed. It is the responsibility of the user to call uninstall
# first, if (s)he deems it necessary
install-lib: $(DESTDIR)$(libdir) \
install-lib-main \
install-lib-samples
LIB_SUB_DIR := config contrib patches scripts
$(patsubst %,install-lib-%-copy,$(LIB_SUB_DIR)): $(DESTDIR)$(libdir)
@echo " INSTDIR '$(patsubst install-lib-%-copy,%,$(@))/'"
@tar cf - --exclude='*.sh.in' $(patsubst install-lib-%-copy,%,$(@)) \
|(cd "$(DESTDIR)$(libdir)"; tar xf -)
# Huh? It seems we need at least one command to make this rule kick-in.
install-lib-%: install-lib-%-copy; @true
# Huh? that one does not inherit the -opy dependency, above...
install-lib-scripts: install-lib-scripts-copy
@chmod a+x $(DESTDIR)$(libdir)/scripts/crosstool-NG.sh
@chmod a+x $(DESTDIR)$(libdir)/scripts/saveSample.sh
@rm -f "$(DESTDIR)$(libdir)/scripts/addToolVersion.sh"
install-lib-main: $(DESTDIR)$(libdir) $(patsubst %,install-lib-%,$(LIB_SUB_DIR))
@echo " INST 'steps.mk'"
@$(install) -m 644 steps.mk "$(DESTDIR)$(libdir)/steps.mk"
@echo " INST 'paths'"
@$(install) -m 644 paths.mk paths.sh "$(DESTDIR)$(libdir)"
# Samples need a little love:
# - change every occurrence of CT_TOP_DIR to CT_LIB_DIR
install-lib-samples: $(DESTDIR)$(libdir) install-lib-main
@echo " INSTDIR 'samples/'"
@for samp_dir in samples/*/; do \
mkdir -p "$(DESTDIR)$(libdir)/$${samp_dir}"; \
$(sed) -r -e 's:\$$\{CT_TOP_DIR\}:\$$\{CT_LIB_DIR\}:;' \
-e 's:^(CT_WORK_DIR)=.*:\1="\$${CT_TOP_DIR}/.build":;' \
$${samp_dir}/crosstool.config \
>"$(DESTDIR)$(libdir)/$${samp_dir}/crosstool.config"; \
$(install) -m 644 "$${samp_dir}/reported.by" \
"$(DESTDIR)$(libdir)/$${samp_dir}"; \
for libc_cfg in "$${samp_dir}/"*libc*.config; do \
[ -f "$${libc_cfg}" ] || continue; \
$(install) -m 644 "$${libc_cfg}" \
"$(DESTDIR)$(libdir)/$${samp_dir}"; \
done; \
done
@$(install) -m 644 samples/samples.mk "$(DESTDIR)$(libdir)/samples/samples.mk"
KCONFIG_FILES := conf mconf nconf kconfig.mk
install-lib-kconfig: $(DESTDIR)$(libdir) install-lib-main
@echo " INST 'kconfig/'"
@mkdir -p "$(DESTDIR)$(libdir)/kconfig"
@for f in $(KCONFIG_FILES); do \
install "kconfig/$${f}" "$(DESTDIR)$(libdir)/kconfig/$${f}"; \
done
install-doc: $(DESTDIR)$(docdir)
@echo " INST 'docs/*.txt'"
@for doc_file in docs/*.txt; do \
$(install) -m 644 "$${doc_file}" "$(DESTDIR)$(docdir)"; \
done
install-man: $(DESTDIR)$(mandir)$(MAN_SUBDIR)
@echo " INST '$(PROG_NAME).1.gz'"
@$(install) -m 644 docs/$(PROG_NAME).1.gz "$(DESTDIR)$(mandir)$(MAN_SUBDIR)"
$(sort $(DESTDIR)$(bindir) $(DESTDIR)$(libdir) $(DESTDIR)$(docdir) $(DESTDIR)$(mandir)$(MAN_SUBDIR)):
@echo " MKDIR '$@/'"
@$(install) -m 755 -d "$@"
install-post:
@echo
@echo "For auto-completion, do not forget to install '$(PROG_NAME).comp' into"
@echo "your bash completion directory (usually /etc/bash_completion.d)"
#--------------------------------------
# Uninstall rules
real-uninstall: $(patsubst %,uninstall-%,$(filter-out lib-kconfig,$(TARGETS)))
uninstall-bin:
@echo " RM '$(DESTDIR)$(bindir)/$(PROG_NAME)'"
@rm -f "$(DESTDIR)$(bindir)/$(PROG_NAME)"
uninstall-lib:
@echo " RMDIR '$(DESTDIR)$(libdir)/'"
@rm -rf "$(DESTDIR)$(libdir)"
uninstall-doc:
@echo " RMDIR '$(DESTDIR)$(docdir)/'"
@rm -rf "$(DESTDIR)$(docdir)"
uninstall-man:
@echo " RM '$(DESTDIR)$(mandir)$(MAN_SUBDIR)/$(PROG_NAME).1.gz'"
@rm -f "$(DESTDIR)$(mandir)$(MAN_SUBDIR)/$(PROG_NAME).1"{,.gz}
endif # Not --local
endif # No extra MAKEFLAGS were added
.PHONY: build $(patsubst %,build-%,$(TARGETS)) install