This commit adds support for the Atmel AVR 8-bit RISC architecture.
This is the first 8-bit architecture to be added to crosstool-ng so the
configuration options for 8-bit architectures are added here as well.
gcc has had support for AVR for quite a while, at least since the 4.3
series for the currently popular ATmega microcontroler series.
The AVR architecture only supports bare-metal toolchains.
gcc for the AVR 8-bit architecture, usually referred to as avr-gcc, is
commonly used in conjunction with the avr-libc library which provides
additional resources for the Atmel AVR 8-bit microcontrollers.
avr-gcc can also be found as a supported package in some recent Linux
distributions.
This commit also closes#66
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Similarly to what we've just done to prevent both --with-arch and
--with-cpu, we do the same to prevent using both --with-cpu and
--with-tune at the same time, since --with-cpu should fully imply
the CPU to tune for (and gcc now errors out when both are specified.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bryan Hundven <bryanhundven@gmail.com>
Normally, a specific CPU fully implies the architecture level. For
example, a cortec-a8 is forcibly an armv7, so spwecifying both is
redundant, and even dangerous (as incompatible values may be passed).
So far, gcc was pretty happy when both were specified at the same time,
and some time ago, it started being a warning, and only recently was it
turned into a hard error.
So, hide the architecture level prompt when a CPU has been specified.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add an ARCH_FLOAT_AUTO option to avoid passing float options
to gcc and allow it to choose
Signed-off-by: Cody P Schafer <dev@codyps.com>
[yann.morin.1998@free.fr: slightly reword the commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <088489641f4790262685.1399687813@localhost>
Patchwork-Id: 347584
For some architectures, it is legit to have an alternate value in the
'architecture' part of the tuple. For example:
armv5te-*
armv7a8-*
Besides, some packages expect the tuple to reflect the arch variant
(eg. openMPI) to detect the variant's capabilities (eg. atomic
primitives).
This patch adds an option for the user to specify a suffix to be added
to the arch-part of the tuple.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Message-ID: <20130120225822.GS6838@1wt.eu>
Patch-Id: 213994
[yann.morin.1998@free.fr: make it a suffix, not an override]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
It's been some time now we've had those features, so unmark them
being experimental.
It does not mean everything is perfect, but may gather some more
testing of those features.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Re-order the three entries in the float choice, in a more sensible
order, ie:
- all hard-float options come first, then soft-float
- options that use the FPU are marked so: hard and softfp
- options that do not use the FPU are marked so: software
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add a toolchain-wide option to enable multilib.
This is currently a noop, and will be implemented
in subsequent patches for each impacted components.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Do not prompt for the type of floating-point support, if the
architecture did not explicitly stated that it did support it.
Reported-by: Morten Thunberg Svendsen <mts@doredevelopment.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Changeset #149c33923f47 broke the architectures that do not
support the --with-float=X ./configure flag (in gcc). For example,
x86_64 does not support it.
Add a new blind config option that architectures can set to tell
they support floating point selection.
Reported-by: Morten Thunberg Svendsen <mts@doredevelopment.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
First, 'SUPPORT' should be spelled 'SUPPORTS'.
Second, 'SUPPORT_XXX' really means 'supports --with-xxx', so rename the
affected options accordingly. Update the affected archs to match the new
namings.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some architectures support a mixed hard/soft floating point, where
the compiler emits hardware floating point instructions, but passes
the operands in core (aka integer) registers.
For example, ARM supports this mode (to come in the next changeset).
Add support for softfp cross compilers to the GCC and GLIBC
configuration. Needed for Ubuntu and other distros that are softfp.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
With the upcoming softfp support, the case..esac test would become
a bit convoluted if it were to test three different booleans.
Introduce a new blind string config option that defaults to the
selected floating point type used.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
kconfig bools are disabled by default, so specifying 'default n' is useless and
noisy. This patch removes all occurrences of 'default n'.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Re-organise the sub-menu so that:
- the archs list comes first,
- followed by archs generic options
- followed by archs specific options
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Move the arch-specific options to the second-part of
the generated files, so they appear after the generic
options, but before the optimisations.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some components have configuration options that can depend on
generic options, so they should go below those.
uClibc for example:
- has its own options (wchar...)
- uses the generic options (threads...)
- if linuxthreads chosen, offers two impls
So we need to be able to split the components options in 2,
one part that is above the generic options, and one part that
ends up below the generic options.
Rationale:
Most of the time, soft-float problems are caused by this sucker of gcc:
it has support for soft float for all of the targets I've tried so far,
but does not activate this code until you dwelve into half a dozen of
files to make it accept to build and link the support code...
So, yes: gcc has soft-float support. And again, yes: gcc is a sucker.
