Pass cset as ref=somename to use this feature. CT_GetGit echos
the cset sha1 on exit since the caller will need to know that
information as it forms part of the downloaded tarball name.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
As posted on http://www.eglibc.org/
====================
EGLIBC is no longer developed and such goals are now being addressed
directly in GLIBC.
====================
I'm not interested in maintaining build support for unsupported
software.
Older branches of crosstool-ng continue to have eglibc support.
If you find issues with older branches, I'm always open to pull
requests.
Removing eglibc also frees up glibc cleanup and build optimization.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This patch adds initial support for musl-libc.
Musl-libc versions currently supported:
* 1.0.3 (Stable)
* 1.1.3 (Previous Mainline)
* 1.1.4 (Mainline)
Futher improvements are needed.
* gcc-4.9.x has issues (Might be fixed in musl-1.1.4).
* Multilib support is needed.
* Checks to make sure paths are correct.
* Move to 2-step gcc build. 3-step build is not necessary.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@free.fr: removed the gcc musl patch, to be added later;
removed dead code do_get_arch()]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This change adds support for experimental patches to be introduced to
crosstool-ng. The patches enabled by this option are to be located here:
patches/experimental/<package>/<version>/XXXX-NAME.patch
Where, XXXX is the patch number to be applied in order, like:
0001-some_patch_one.patch
0002-some_patch_two.patch
9999-some_patch_to_be_applied_last.patch
In the first patch series, all patches in the EXPERIMENTAL_PATCHES
option will be applied all at once, or none at all.
In a later [RFC] patch, I plan on adding finer tuned patch
enable/disable options based on the name of the patch and where it is
located in the patches/experimental sub-tree. So the name of the patch
should use underscores between words in the patch name.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@free.fr: slightly reword prompt]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
These variables behave the same for bitness as their counterparts do
for endianness: they are defined to the appropriate bitness.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cody P Schafer <dev@codyps.com>
We currently define target_endian_el and target_endian_eb to be the
tuple extension depending on endianness, defined to be respectively
'el' or 'eb' according to the endianness.
Some architecture do not use 'el' or 'eb', but use 'le' or 'be'.
Provide that as well, as two new variables: target_endian_le and
target_endian_be.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cody P Schafer <dev@codyps.com>
Allow '-1' to be specified as CONNECTION_TIMEOUT to disable the use
of the connection timeout for wget.
Signed-off-by: Cody P Schafer <dev@codyps.com>
Message-Id: <cb33f8c2cbaf802d4f04.1399687632@localhost>
Patchwork-Id: 347582
'zcat' on MacOS-X is broken (it is not gzip's zcat, but compres' zcat).
Use 'gzip -dc' for portability, as suggested by Anthony.
Reported-by: Fernando Ortiz <fortiz2k@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anthony Foiani <anthony.foiani@gmail.com>
This patch fixes the download of the avr32 headers in crosstool-ng by
fetching them directly from Atmel's web site instead of the now-broken URL
given by the original author of the avr32-header-fetching modification,
who fetched them from a copy on his own, now-defunct server.
It also adds the necessary logic to extract from a zip file, as that is
how the headers are packaged.
To configure it for avr32 after launching ct-ng menuconfig in an empty
directory:
Paths and misc options ->
Shell to use as CONFIG_SHELL = sh
Target options ->
Target Architecture = avr32
Toolchain options ->
Tuple's alias = avr32
Binary utilities ->
binutils version = 2.18a
C compiler
gcc version = 4.2.2
C-library
newlib version = 1.17.0
Enable IOs on long long = yes
Enable IOs on floats and doubles = yes
Disable the syscalls supplied with newlib = yes
CONFIG_SHELL is necessary to get round the "fragment: command not
found" bug when binutils-2.18 is configured using bash.
Prepared against crosstool-ng mercurial trunk on 31 March 2012.
Signed-off-by: Martin Guy <martinwguy@gmail.com>
[yann.morin.1998@free.fr: update bundles sample accordingly]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <CAL4-wQrg_NQ7jm-NCADqeyQr9twyhtx42OUGNThP6gWeqZc=kw@mail.gmail.com>
Patchwork-Id: 232612
For some architectures, it is legit to have an alternate value in the
'architecture' part of the tuple. For example:
armv5te-*
armv7a8-*
Besides, some packages expect the tuple to reflect the arch variant
(eg. openMPI) to detect the variant's capabilities (eg. atomic
primitives).
This patch adds an option for the user to specify a suffix to be added
to the arch-part of the tuple.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Message-ID: <20130120225822.GS6838@1wt.eu>
Patch-Id: 213994
[yann.morin.1998@free.fr: make it a suffix, not an override]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Properly catch resuming the build when continuing past the
failed command.
The 'case ;;&' construct is a bash4ism. Get rid of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CT_DEBUG_INTERACTIVE is disabled when stdin, stdout or
stderr are redirected, but the check is only done at
the start of the build and doesn't catch when individual
build commands use redirection. When stdin is redirected
it will cause the debug shell to exit immediately, causing
and endless loop. Thus, save the stdin/our/err file handles
and restore them before invoking the debug shell.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Message-Id: <20121030102225.GA8303@sig21.net>
Patchwork-Id: 195409
This makes the patch name show up on the command line
logged by CT_DoExecLog so it's easier to see
what is going on. The -i for patch is specified
by Posix and supported by GNU patch and busybox patch.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: remove now-useless debug message]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <20121030103620.GB8303@sig21.net>
Patchwork-Id: 195418
Since we added the debug-shell feature, CT_DoExecLog no longer
returns the error code of the command, but always return 0.
This breaks the download mechanism, which relies on CT_DoExecLog
to fail _on_purpose_ to detect that the ressource was not found
at the specified URL.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
So we get caught by the trap-handler and
have a chance to run the debug-shell.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Johannes Stezenbach <js@sig21.net>
Add an option that, when a command fails:
- starts an interactive shell with the failed command's environment
- attempts re-execution of the failed command, continues, or aborts
at user's whim.
Before starting the debug-shell, the backtrace is printed.
When exiting for an abort, the standard error message is printed.
Based on an idea and a patch from: Johannes Stezenbach <js@sig21.net>
http://sourceware.org/ml/crossgcc/2012-09/msg00144.html
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: integrate in the fault handler]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Johannes Stezenbach <js@sig21.net>
Patchwork-Id: 191571
Patchwork-Id: 191668
Avoid error when commands in scripts/crosstool-NG.sh fail
before CT_BUILD_DIR is set.
So we need to remove the backtrace marker of a potential previous
build. Previously, it was implicitly removed because we did remove
the directory it was in, which is no longer the case.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: remove backtrace marker on start of build]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <20121015094615.GA18673@sig21.net>
Patchwork-Id: 191498
Add a generic custom location infrastructure (inspired by the one in
kernel/linux) to allow the user to use custom tarballs or directories
for any component.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
[yann.morin.1998@free.fr: move config option, improve help text, fix API doc]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <131c163c69f9cc81d2be.1349931191@localhost.localdomain>
PatchWork-Id: 190784
Message-Id: <0bbaba9190a76ba97f72.1349931192@localhost.localdomain>
PatchWork-Id: 190785
Currently, if downloads are forbidden, the mirror is still tried for.
Change this way:
- if downlaods forbidden, do not try neither upstream locations nor mirror
- add option to only use the mirror, and avoid upstream locations
Signed-off-by: Austin Morton <austinpmorton@gmail.com>
[yann.morin.1998@free.fr: broaden the if USE_MIRRORto enclode mirror location]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
It's easier to have as much as possible stuff in the same place to
ease backup/restore, and make things easier to follow.
Move the host companion libraries install dir as a sub-dir of the
build-tools install dir (but not directly in it, it would break
for canadian or cross-native).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
There really is no good reason to install the core compilers in their
own places, one for each pass. We can install them with the other
build tools.
Also, this implies that:
- there are fewer directories to save/restore
- there are fewer symlinks to create for binutils
- the PATH is shorter
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
A lot of places are currently doing:
mkdir -p foo/bar
cd foo/bar
Or even:
mkdir -p foo/bar
pushd foo/bar
[...]
popd
Provide both wrapper to ease doing this.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In the process of converting to autoconf, the kconfig option
were not properly translated.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Dumping the backtrace has been broken since changeset #652e56d6d35a:
scripts: execute each steps in a subshell
We can spawn sub-sub-shells in some cases.
The way the fault handler works is to dump the backtrace, but to avoid
printing it once for every sub-shell (which could get quite confusing),
it simply exits when it detects that it is being run in a sub-shell,
leaving to the top-level shell the work to dump the backtrace.
Because each step is executed in its own sub-shell, the variable arrays
that contain the step name, the source file and line number, are lost
when exiting the per-step sub-shell.
Hence, the backtrace is currently limited to printing only the top-level
main procedure of the shell.
Fix this thus:
- when dumping the bckatraces for the steps & the functions, remember
it was dumped, and only dump it if it was not already dumped
- at the top-level shell, print the hints
Also, rename the top-level step label.
Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some architectures support a mixed hard/soft floating point, where
the compiler emits hardware floating point instructions, but passes
the operands in core (aka integer) registers.
For example, ARM supports this mode (to come in the next changeset).
Add support for softfp cross compilers to the GCC and GLIBC
configuration. Needed for Ubuntu and other distros that are softfp.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When hardfloat is selected, we need to pass that selection down to
./configure and in the CFLAGS.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
With the upcoming softfp support, the case..esac test would become
a bit convoluted if it were to test three different booleans.
Introduce a new blind string config option that defaults to the
selected floating point type used.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Change CT_ExtractGit so that it clones the repository, instead of just
symlinking it. After cloning, any given ref is checked out, or if no
ref is given, the HEAD of the repository is checked out.
This makes CT_Extract behave similar for git repositories as it does
for tarballs, so that it for example can be used for passing glibc-ports
as a git repository.
Signed-off-by: "Esben Haabendal" <esben.haabendal@prevas.dk>
[yann.morin.1998@anciens.enib.fr: fix incomplete var rename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Virtually all FTP server available on-line support passive FTP.
At least, this is the case for the servers crosstool-NG needs to
connect to.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, we use either wget or curl, whichever is installed.
In case both are installed, both are used. This means that it
takes a while trying all extensions.
Remove use of wget, and use only curl.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some packages are available as LZMA tarballs. LZMA is a relatively recent
compression algorithm; it's slightly better than bzip2, but offers much
faster decompression. LZMA is now deprecated in favor of XZ, but some
packages switched to LZMA when XZ was not yet available, or still in its
infancy. Latest XZ (which totaly obsoletes LZMA) offers a backward LZMA-
compatible utility, so we can check for 'lzma' nonetheless.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
./configure does check for the presence of gz and bzip2, so we can
safely use them in the build scripts.
On the other hand, more recent formats (eg. XZ) are not yet widely
available, and we do not want, and can't, force the user to install
them as a pre-requisite.
So, build up a list of allowed tarball formats based on the available
decompressors. For no, this is a static list, but the upcoming XZ
support will conditionnaly add to this list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When downloading via svn/cvs/... an attempt to retrieve from the
mirror is made. If the mirror does not have the required tarball,
an error message is printed. This is misleading, as the download
may later succeed via svn/cvs/...
Remove the messages about failed downloads altogether.
At the same time, use "if ... then ... fi" instead of "... && ..."
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This is needed later, when we'll conditionnally use both the
upstream and the mirror URLs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, the mirror can be used either:
- as a fallback in case upstream is unavailable (default behavior)
- as the preferred source for downloads
But the most common use-case seems to provide a truely-LAN mirror
to speed up downloads in big corpos', and/or provide a 'trusted'
source for the tarballs.
So, make the following changes;
- if a mirror is specified, always try that before trying upstream
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
