In the early days, cloog-ppl was bizarrely packaged: the first tarball
did not contain the version in the name of the extracted directory, so
we had to play tricks.
Nowadays, however, the first component of the path are stripped when
extracting a tarball, which means that the created directory will
always be properly named. So, our old tricks do no longer work, and
worse, they break the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
ncurses 5.9 wants tic to be either one of:
- $TIC_PATH
- /usr/bin/tic
Of course, se do not want the latter, for it can be incompatible if the
ncurses in the build system is too old (eg. RHEL 5.6, Debian Lenny...).
So, force TIC_PATH to the location of our own tic.
Also, install tic alongside the other build tools, not in a sub-dir
of the toolchain installation dir.
Signed-off-by: Willy Tarreau <w@1wt.eu>
[yann.morin.1998@anciens.enib.fr: install in builtools/bin, move TIC_PATH]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some architectures support a mixed hard/soft floating point, where
the compiler emits hardware floating point instructions, but passes
the operands in core (aka integer) registers.
For example, ARM supports this mode (to come in the next changeset).
Add support for softfp cross compilers to the GCC and GLIBC
configuration. Needed for Ubuntu and other distros that are softfp.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When hardfloat is selected, we need to pass that selection down to
./configure and in the CFLAGS.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
With the upcoming softfp support, the case..esac test would become
a bit convoluted if it were to test three different booleans.
Introduce a new blind string config option that defaults to the
selected floating point type used.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
CT_EXTRA_FLAGS_FOR_HOST needs a preceding space to separate it from
any other options that have already been set.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
It's been a while now that crosstool-NG has been hosted on it's own
website, and not at my home. Change every reference to the old site
to the new one, everywhere is makes sense to.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Changeset #7c288c777455 broke the tuple for uClibc-based
powerpc toolchains, by unconditionally forcing CT_TARGET_SYS
to "gnu".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Change CT_ExtractGit so that it clones the repository, instead of just
symlinking it. After cloning, any given ref is checked out, or if no
ref is given, the HEAD of the repository is checked out.
This makes CT_Extract behave similar for git repositories as it does
for tarballs, so that it for example can be used for passing glibc-ports
as a git repository.
Signed-off-by: "Esben Haabendal" <esben.haabendal@prevas.dk>
[yann.morin.1998@anciens.enib.fr: fix incomplete var rename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, we check host feature in ./configure. This works only for
cross toolchains, but not for canadian toolchains. ./configure has
absolutely no way to know what the host for the toolchain will be;
only the build scripts know.
So, move the headers & libraries checks from ./configure to the build
scripts, early enough in the build, but not before we know the host
compiler and other tools.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
To avoid variable leakage from one step to another, isolate the
steps from each others by running them in their own sub-shell.
This avoids variables leaking from one step to the others.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Tremendously helps when running on at least Ubuntu, with dash as
the system shell (ie. /bin/sh points to dash).
Reported by a few people, of which:
leming, ccct and ccole on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add a new option to enable/disable the Python scripting in gdb.
Hide the option (ie. disable it) when statically linking the cross-gdb.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Allow the user to configure extra flags to pass to the host compiler
at build time. Applies to both C and C++.
Useful on Ubuntu to turn off the stack protector and fortify defaults
so the program stands a better chance of running on other distros.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: put the custom flags at the end]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The GOLD linker is written in C++. Pass CT_CFLAGS_FOR_HOST as
CXXFLAGS to configure so that any host specific flags are passed
through.
It feels a bit funny passing CFLAGS as CXXFLAGS, but the PPL and GCC
target rules already do the same.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
When CT_PARALLEL_JOBS is -1, set the number of parallel jobs to the
number of online CPUs + 1. Update documentation to match.
I find this useful when building in the cloud. You can use the same
.config file and have the build adapt to the number of processors
available. Limited testing shows that NCPUS+1 is faster than NCPUS+0
or NCPUS+2.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
Allows using either a tarball or a directory as the custom kernel
source location.
Signed-off-by: Vincent BENOIT <sinseman44@gmail.com>
[yann.morin.1998@anciens.enib.fr: fix space damage, detailed commit message]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Since kernel.org is dead, and there is no announced or known estimated
time or return to normality, it is impossible to download any kernel at
this time.
Add a known-working mirror.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Even if the current process is highly parallel, crosstool-NG spends most
of its time in single-job steps on fast machines (with a 12-CPU system,
I approximate the parallel vs. non-parallel time to be in the order os
1 to 3; that is crostool-NG spends two-thirds of its time running
non-parallel jobs).
Some steps to build gcc can be paralleled, gaining a litle bit of time
on the whole compilation.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Virtually all FTP server available on-line support passive FTP.
At least, this is the case for the servers crosstool-NG needs to
connect to.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, we use either wget or curl, whichever is installed.
In case both are installed, both are used. This means that it
takes a while trying all extensions.
Remove use of wget, and use only curl.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The sysroot prefix dir was broken in #4960f5d9f829 due to a mishap
when making the out-of-sysroot lib/ symlink: the './' was mistakenly
changed into a single '.' .
Although Jonathan suggested restoring the missing '/' to restore it to
normal operation, I prefered using an explicit pushd/popd to be extra
sure of the symlink location and target, along with a fix in the sysroot
relative directory calculation.
Reported-by: Jonathan Grundon <JGrundon@xos.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Allows to choose if one wants to keep or not the syscalls that are provided with
newlib. It passes the --disable-newlib-supplied-syscalls or
--enable-newlib-supplied-syscalls to the configure script. If one chooses to
disable the builtin syscalls, he/she will have to write his/her own. This can
be usefull to port newlib to a new platform/board.
Signed-off-by: Kévin PETIT <kpet@free.fr>
Some packages are available as LZMA tarballs. LZMA is a relatively recent
compression algorithm; it's slightly better than bzip2, but offers much
faster decompression. LZMA is now deprecated in favor of XZ, but some
packages switched to LZMA when XZ was not yet available, or still in its
infancy. Latest XZ (which totaly obsoletes LZMA) offers a backward LZMA-
compatible utility, so we can check for 'lzma' nonetheless.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
HOST_OS really is the target OS. Allow setting it for configure
via an environment variable.
libltrace.a should have an index:
Allow ar to be set as an environment variable, and generate
an index in this lib.
Reported-by: "Guylhem Aznar" <crossgcc@guylhem.net>
Signed-off-by: "Titus von Boxberg" <titus@v9g.de>
Because we need our own host tic, we have to build it; and we do build
it statically for now.
But as MacOS/Darwin/Whatever-you-call-it does not support static linking
(what a shame!), it fails.
Anyway, we don't really care it being shared, in the end.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The custom-tarball symlink was created in CT_SRC_DIR, when it
should be created in CT_TARBALLS_DIR.
Reported-by: Guylhem Aznar <crossgcc@guylhem.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The script that is installed, and which sole purpose is to dump
the .config that was used to build the toolchain, is pure insanity.
Let's make it much, much more simpler...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
./configure does check for the presence of gz and bzip2, so we can
safely use them in the build scripts.
On the other hand, more recent formats (eg. XZ) are not yet widely
available, and we do not want, and can't, force the user to install
them as a pre-requisite.
So, build up a list of allowed tarball formats based on the available
decompressors. For no, this is a static list, but the upcoming XZ
support will conditionnaly add to this list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Simplify the way the custom tarball is handled:
- fake version="custom"
- at download, simply link the custom tarball to:
"linux-custom.${custom_extension}"
- at extract, the above allows to simply extract "linux-${LINUX_VERSION}"
where LINUX_VERISON is set to the fake version="custom"
Not that much convoluted, in fact... :-/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Although ctor/dtor do not seem strictly required, missing them proves
rather inconvenient, as ld can't link binaries.
Reported-by: John Spencer <maillist-uclibc@barfooze.de> (sh4rm4 on IRC)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When downloading via svn/cvs/... an attempt to retrieve from the
mirror is made. If the mirror does not have the required tarball,
an error message is printed. This is misleading, as the download
may later succeed via svn/cvs/...
Remove the messages about failed downloads altogether.
At the same time, use "if ... then ... fi" instead of "... && ..."
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This is needed later, when we'll conditionnally use both the
upstream and the mirror URLs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, the mirror can be used either:
- as a fallback in case upstream is unavailable (default behavior)
- as the preferred source for downloads
But the most common use-case seems to provide a truely-LAN mirror
to speed up downloads in big corpos', and/or provide a 'trusted'
source for the tarballs.
So, make the following changes;
- if a mirror is specified, always try that before trying upstream
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The cvs download helper looks for the local tarballs dir to see if it
can find a pre-downloaded tarball, and if it does not find it, does
the actual fetch to upstream via cvs.
In the process, it does not even try to get a tarball from the local
mirror, which can be useful if the mirror has been pre-populated
manually (or with a previously downloaded tree).
Fake a tarball get with the standard tarball-download helper, but
without specifying any upstream URL, which makes the helper directly
try the LAN mirror.
Of course, if no mirror is specified, no URL wil be available, and
the standard cvs retrieval will kick in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The svn download helper looks for the local tarballs dir to see if it
can find a pre-downloaded tarball, and if it does not find it, does
the actual fetch to upstream via svn.
In the process, it does not even try to get a tarball from the local
mirror, which can be useful if the mirror has been pre-populated
manually (or with a previously downloaded tree).
Fake a tarball get with the standard tarball-download helper, but
without specifying any upstream URL, which makes the helper directly
try the LAN mirror.
Of course, if no mirror is specified, no URL wil be available, and
the standard svn retrieval will kick in.
Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When retrieving tarballs from upstream, if no URL was given, do not
fail; simmply ignore that fact.
This will be used later when the SVN helper will call the standard
helper to try the LAN mirror before trying svn.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
do_libc_locales_extract() and do_libc_locales() in glibc-eglibc.sh-common have
been overridden for both glibc and eglibc, so they can now be removed, which
this patch does.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds partial support for glibc locales.
For now, it only generates the appropriate locales when the host and the target
have the same endianness and uint32_t alignment.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds a common glibc/eglibc infrastructure to build and install the
libc locales.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Someof the mingw32 source tarballs have an appended '-src' after the
version.
Since changeset #6e1412ba8da9 (scripts/functions: force extract folder
to archive basename), it means mingw tarballs get extracted in a directory
ending with '-src'.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Now that we akways extract the tarballs in a sane location (see changeset
#6e1412ba8da9: scripts/functions: force extract folder to archive basename),
the uClibc snapshot dir now has the date (as version) in it, eg.:
uClibc-20100710
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Samples should contain kconfig-parsable definitions, not script variables.
.config.2 contains bash arrays, which is definitely not kconfig-safe...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some archives like those of the 2011.07 revisions of Linaro GCC contain a folder
name different from the archive basename, which leads to errors afterwards, e.g.
when patching. E.g.:
gcc-linaro-4.5-2011.07.tar.bz2 extracts to gcc-linaro-4.5-2011.07-0/
This patch changes CT_Extract() to force the extraction of all archives to a
folder named like the archive basename. E.g.:
gcc-linaro-4.5-2011.07.tar.bz2 now extracts to gcc-linaro-4.5-2011.07/
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Currently, no --enable-add-ons option is passed to libc configure when
"$(do_libc_add_ons_list ,)" is empty, which makes configure automatically search
for present add-ons. In that case, all present add-ons are built, although
no add-on was selected by the user in the config. Moreover, this can make the
configure fail if some non-standard add-ons like eglibc-localedef are present.
This behavior also leads to an inconsistency from a user point of view between
the following cases:
- LIBC_ADDONS_LIST="", LIBC_GLIBC_USE_PORTS=n and THREADS="none" in the config,
which makes "$(do_libc_add_ons_list ,)" return "", so all present add-ons
are built.
- LIBC_ADDONS_LIST="", LIBC_GLIBC_USE_PORTS=n and THREADS!="none" in the
config, which makes "$(do_libc_add_ons_list ,)" return the add-on supporting
the chosen threading implementation, e.g. "nptl", so only this add-on is
built.
This patch disables the building of all add-ons in that case.
It is still possible to build all present add-ons by adding --enable-add-ons to
LIBC_GLIBC_EXTRA_CONFIG_ARRAY.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
gdb needs to know where to find the libstdc++ helper python script
to do, well, whatever it has to do with it...
We can't install that in the user's ~/.gdbinit, it's too complex to
handle all the cases. Moreover, if the user is using more than one
toolchain, we can't put all that stuff in there...
Just provide a sample config file the user can adapt to his/her
own needs.
Thanks go to Khem RAJ for providing such a hint:
http://sourceware.org/ml/crossgcc/2011-07/msg00026.html
Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
CC: Khem Raj <raj.khem@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The place to get 3.x has changed; the version scheme has changed.
No need to be overkill, just support 3.x; 4.x is not even dreamt of.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
If the user builds a toolchain over an existing one, so, without removing
CT_PREFIX_DIR, the build fails as the symlinks already exist, as does the
build.log.
This can also happen (for build.log) if the user first ran in download-
or extract-only.
Patch (with no SoB) originally from:
Phil Wilshire <phil.wilshire@overturenetworks.com>
Modified by me as it did not apply cleanly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
During the build, we create lib{32,64}/ symlinks out of the sysroot.
In some cases (eg. mingw32 target), these symlinks are still required
when running the toolchain. For other combinations, the symlinks are
without incidence, so they can be safely kept after the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case there's one lingering around (whether the previous build was
successful, or failed), we have to remove the buildtools directory
as well as the toochain build dir.
This should also fix the case where out makeinfo wrapper calls
itself recursively.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Maintaining thos multi-line shell commands in a Makefile rule is
a real PITA.
Move the two affected rules (build_gen_choice_in and build_gen_menu_in
to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The new MIPS-specific options are not valid for other targets.
Also, move the arch-specific setting lower in the extra_config setting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add the following MIPS specific options when configuring gcc:
--with(out)-llsc
--with(out)-synci
--with(out)-mips-plt
--with-divide=type
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add an option to specify the hash type that gcc will ask the linker to use.
It is a provision for the upcoming 4.7, as no version currently supports it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add an option to configure gcc with --enable-linker-build-id.
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Instead of getting eglibc over standard svn://svn.eglibc.org
Add an option that allows the user to get source from
http://www.eglibc.org/svn
This is useful if you are behind a firewall or proxy.
If you are behind a proxy, don't forget to configure
${HOME}/.subversion/servers
In the [global] section setup your proxy configuration.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@anciens.enib.fr: removed useless 'default n']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
That option is coming from the original crosstool, and is not entirely
understand here.
Moreover, it breaks with newer gcc-s: 4.6.1 now breaks while configuring
libjava (and probably some other libs as well, untested).
There is an related bug report to the gcc BZ:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49555
If need be, the old behavior can be restored with:
CC_CORE_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"
CC_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Refactor the contents of 'do_libc_start_files()' and 'do_libc()' into a
parameterized 'do_libc_backend()'. 'do_libc_start_files()' and 'do_libc()'
call 'do_libc_backend()' with either 'libc_mode=startfiles' or
'libc_mode=final' (respectively) so that the startfiles/headers and
the final libc builds are configured and built with the same options.
One example of where this is needed is when building a mips toolchain.
Previously, if you were building an n32 toolchain, you wouldn't have
noticed an issue, because if '-mabi' is not in CFLAGS, n32 is the
default:
http://sourceware.org/git/?p=glibc-ports.git;a=blob;f=sysdeps/mips/preconfigure;hb=HEAD
But when trying to build an o32 or n64 toolchain the build would
have failed. This is because (e)glibc expects "-mabi={o32,n32,n64}" to be
in CFLAGS, but was not previously provided in 'do_libc_start_files()'.
The build failure would happen in the shared-core gcc when it tries to
configure an n64 or o32 gcc with an n32 libc.
A simpler solution would have been to just add TARGET_CFLAGS to configure
in 'do_libc_start_files()', but this way makes configure and make
consistent for both steps.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Cross-gdb depends on expat and python. If either is missing, cross-gdb will
build successfully, but lacking some features.
Especially, if expat is missing, cross-gdb will be unable to parse the target
description, which may lead to runtime malfunctions and the following GDB
warning:
"Can not parse XML target description; XML support was disabled at compile time"
Hence, expat should be considered mandatory.
On the other hand, the features missing without python are not critical, so
python should not be considered mandatory.
This patch does the following:
- At configure time, warn the user if either expat or python is missing.
- In menuconfig, disable the static build options regarding cross-gdb if no
static version of expat is available, and disable cross-gdb if expat is
missing.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
[yann.morin.1998@anciens.enib.fr: add comment for impossible static cross-gdb]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The NPTL add-on has always been internal, so there is no
reason to try downloading it, it will never succeed.
Add provision to skip other add-ons as well.
For consistency, do the same test in both glibc and eglibc.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"crosstool-NG-${CT_VERSION}" is currently the default for TOOLCHAIN_PKGVERSION,
and this options is passed as is to --with-pkgversion.
This patch prepends "crosstool-NG ${CT_VERSION}" to TOOLCHAIN_PKGVERSION before
passing it to --with-pkgversion.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Some addons are bundled with glibc/eglibc, so we should not try to
download and extract them.
This is done as thus:
- at download time:
- if the add-on download fails, keep going;
- at extract time:
- if the addon is present in the source tree, ignore it;
- if the addon is missing in the source tree:
- if the archive is present, extract it;
- if the archive is missing, bail out.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
eglibc is only available from SVN. The script currently calls svn
in its own tortuous and convoluted way.
Use the egeneric SVN extract functions, and sinplify the eglibc
download function.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case of eglibc, some add-ons that were previously external are
now internal (bundled with the main sources).
So we do not want to fail if an add-on can't be downloaded; we
want to post-pone the check until we can extract the main archive.
So:
- try to retrieve the add-on
- if it fails, print a warning instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing retrieval procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
For glibc/eglibc, if the add-on can not be extracted, we want to catch
the error to print a meaningful error message.
So:
- try to extract the tarball
- if it fails, print a waring instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing extract procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case of glibc/eglibc, some add-ons that were previously external are
now internal (bundled with the main sources).
So we do not want to fail if an add-on tarball can't be downloaded; we
want to post-pone the check until we can extract the main archive.
So:
- try to download the tarball
- if it fails, print a warning instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing retrieval procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This patch makes gdb benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch makes eglibc benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch makes binutils benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch promotes the PKGVERSION and BUGURL options to toolchain level so that
all toolchain components supporting them can benefit from them.
These options are passed to configure through --with-pkgversion and
--with-bugurl.
They are supported by binutils 2.18+, gcc 4.3+, eglibc 2.9+ and gdb 7.0+.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds a function to extract major, minor, revision, etc. from version
numbers.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
glibc and eglibc have a very similar extraction process, so it
makes sense to commonalise it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Fixes the issue with {e,}glibc addons having short and long names (such as
eglibc-ports-2_13 and ports), which caused configure scripts to run
through them twice and thus configuring incorrectly.
For instance, the mips64el-n32-linux-gnu toolchain would be recognized
correctly first, but then the second pass would change it to mips32,
building a mixed MIPS-III N32 and MIPS-I libc.
Signed-off-by: Nicolás Reynolds <fauno@kiwwwi.com.ar>
[yann.morin.1992@anciens.enib.fr: remove spurious trailing spaces]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This patch sets the runtime sysroot to fix the following GDB warning:
"Unable to find dynamic linker breakpoint function.
GDB will be unable to debug shared library initializers
and track explicitly loaded dynamic code."
The sysroot can later be changed within gdb with the `set sysroot`
command if necessary.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Transfrom array variables from pure strings (in the kconfig output)
into proper bash arrays declarations, for feeding to the build scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Make it explicit that a variable is an array bu the name of the variable.
It will be used later when .config gets munged to allow both multiple
arguments and arguments with spaces at the same time to be passed from the
configuration down to the build scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
By default, PPL wants to build interfaces for any of a variety of
langauges it finds on the local host (python, java, possibly perl, also
more esoteric languages such as ocaml and prolog).
These extra interfaces can double the compile time for the library. For
single-process builds, I found a savings of more than 40%:
default / j1: 716s total, 143.2s avg, 0.52s stdev
just_c / j1: 406s total, 81.2s avg, 0.33s stdev
just_c_cpp / j1: 413s total, 82.6s avg, 0.22s stdev
And for multi-process builds, it approached 50%:
default / j4: 625s total, 125.0s avg, 0.57s stdev
just_c / j4: 338s total, 67.6s avg, 1.25s stdev
just_c_cpp / j4: 327s total, 65.4s avg, 0.36s stdev
Since the PPL we build within ct-ng is only used by GCC, we only need to
build the C and C++ interfaces.
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
PPL does not use the "--enable-cxx" configure switch at all; it's
possibly a cut-and-paste leftover from 'gmp.sh'. (PPL is written in C++
natively, so it doesn't make much sense to have to enable C++; GMP, on
the other hand, is written in C with an optional C++ wrapper.)
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
'configure' for PPL 0.11 (and later) needs "--with-gmp-prefix" to
provide the location of the GMP toolkit; the previous switches were
"--with-libgmp-prefix" and "--with-libgmpxx-prefix".
The upstream log message is:
commit 08dfb6fea094f8c5a533575a3ea2095edce99a6d
Author: Roberto Bagnara <bagnara@cs.unipr.it>
Date: Sun Jul 12 21:39:46 2009 +0200
New configure option --with-gmp-prefix supersedes the (now removed)
options --with-libgmp-prefix and --with-libgmpxx-prefix.
Link: http://www.cs.unipr.it/git/gitweb.cgi?p=ppl/ppl.git;a=commit;h=08dfb6fea094f8c5a533575a3ea2095edce99a6d
Since PPL's 'configure' ignores unknown switches, we use all three so we
don't have to conditionalize the ppl.sh build script itself.
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
Since the gcc configuration changes, the way to select the
dependent companion libraries has changed.
Update the addToolVersion script to match.
Reported-by: Xun Li <lxfind@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Fix typo introduced by changeset #055e505f28be.
Also, handle older versions of gcc (typically, all versions
prior to 4.0.0).
Maxime provided a similar patch, missing the case for the
legacy versions of gcc.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
We can't run the newly built gcc when it is a canadian cross.
Thus, we can't get the version number, and thus we can't get
the directory libexec subdirectory to strip.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The components have their version selection handled either in the .in
file or the .in.2 file. Handle both cases.
Also, when dumping an existing version, keep the user's grep options
(ie. do override neither options nor colors).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
gcc installs the C++ headers in ${PREFIX}/include/ but we trash
that directory at the end of the build.
We previously removed that directory as it contained the companion
libraries header files. But it's been some time now that we isntall
the companion libraries in their own dedicated place, so we do not
need to remove that directory.
Until we have a better fix, just keep that directory for now.
Reported-by: Bob Rossi <bob@brasko.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Reformat the error messages:
- strip ${CT_LIB_DIR} from scripts path names
- strip ${CT_TOP_DIR} from build.log path and docs path
- overall shorter lines
- point to the known-issues file
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case date(1) does not support nanosecond resolution, it does
not interpret '%N', and leave it as-is. So we have to remove it.
Note that some versions replaces '%N' with 'N', so we have to
take this into account as well.
Reported-by: Kyle Grieb <grieb.kyle@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Using CT-NG with progress bar disabled, still prints CR ('\r') characters
on the output. When you capture the output to a file as part of an
automated build, it shows extra empty lines.
For example:
------------------------------------------------------------
[INFO ] Performing some trivial sanity checks
[INFO ] Build started 20110404.113619
[INFO ] Building environment variables
[EXTRA] Preparing working directories
[EXTRA] Installing user-supplied crosstool-NG configuration
------------------------------------------------------------
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Managing the shared version of the companion libraries
has become cumbersome.
Also, it will one day be possible to use the companion
libraries from the host distribution, and then we will
be able to easily use either shared or static libs.
As a side note, while working on the canadian-rework
series, it has become quite more complex to properly
handle shared companion libraries, as they need to be
built both for the build and gost systems. That's not
easy to handle. At all.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
gold is not capable of building glibc/eglibc, so we have to
force using the BFD linker, ld.bfd.
Offer a blind option that affected components can select to
force use of the BFD linker during the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add support for building SPARC targeted toolchain.
With this patch I have built a working sparc V8 (32 toolchain).
Testing shows that not all gcc versions works well:
4.4.1 OK (kernel builds and the final kernel can boot)
4.4.2 Not tested
4.4.3 Not tested
4.4.4 BAD (Kernel can build but fails during boot)
4.4.5 BAD (Kernel can build but fails during boot)
4.5.1 BAD (Build fails with a spill related ICE - http://gcc.gnu.org/bugzilla/show_bug.cgi?id=35664)
4.5.2 OK (kernel builds and boots)
I have successfully been using the 4.5.2 version for a few months.
This patch does not add support for the LEON variant.
That may come later.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[yann.morin.1998@anciens.enib.fr: for 32-bit, default CT_TARGET_ARCH is OK]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
PPL 0.11+ installs three libs: lippl, libppl_c and libpwl.
libppl_c has a dependency on libpwl (at least for watchdog stuff).
While gcc correctly links with libppl and libppl_c, it does not
pull libpwl in. In case of shared libs, this is not a problem, as
libppl_c has a NEEDED dependency on libpwl. But for static libs,
that does not work. Although libppl_c.la exists and has a correct
dependency on lipwl, somehow gcc misses it. So we have to force
pulling libpwl when needed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
There was a mishap when cut-n-pasting code from the final
step into the core step: a variable was not renamed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some scripts have 'very long lines', so the output of 'file'
will have that mentioned, such as:
POSIX shell script, ASCII text executable, with very long lines
Reported-by: Kyle Grieb <grieb.kyle@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
