For that, make CT_BUILD_TOP_DIR a non-settable config option (so that it is
recursively expanded with CT_HOST/CT_TARGET). Use a common prefix, with
same default as for regular sample build.
Use showConfig.sh to determine host toolchain path (for canadian crosses)
and build directory to be removed.
Remove LIBC_SYSROOT_ARG (unused).
Signed-off-by: Alexey Neyman <stilor@att.net>
Makes them sorted out by host, and removes the need for similar hack in
samples.mk.
Change how canadian crosses are named: using `=' character resulted in
Glibc build failure.
Move loading config into a common function, CT_LoadConfig.
Signed-off-by: Alexey Neyman <stilor@att.net>
On top of making <component>_CUSTOM much more complicated to rewrite,
you couldn't depend on a requirement for all of the components to treat
custom sources the same with it around.
If you need a custom source for a component, define it in the component.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
As per #222, in crosstool-NG >= 1.23.0, we will only support:
[upstream supported gcc versions] - 1
As of this writing, these versions are:
* 5.2.0
* 4.9.3
* 4.8.5 (the -1, since development on 4.8.x is now closed)
I plan to keep 4.8.5 around because of some architectures having issues
with over-optimization or just faulty optimization in the 4.9.x and
possibly newer versions.
I also cleaned up a requirement for glibc to depend on >= gcc-4.6.x for
>= glibc-2.20, but since the lowest gcc we support after this change is
>= 4.8.5, this condition can go away.
Patches for older gcc versions are removed in the next commit.
This closes#222
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
I forgot that the logs must stay small, and if they fail we'll grab the
last few hundered lines.
Note, the logs must stay smaller then 4M.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit introduces a configure time option to let the build know
that this is going to be an automated build.
This forces the build to disable the progress bar, log tool warnings,
and force the log level to debug.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This functionality was provided so that crosstool-ng could have a
further set of patches considered experimental and unsupported.
Now that musl-libc support is making it's way upstream in gcc, I'm
removing this support and the experimental musl patches.
In later commits, backports from gcc upstream will be added to the
supported patch sets to support musl-libc.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This change adds support for experimental patches to be introduced to
crosstool-ng. The patches enabled by this option are to be located here:
patches/experimental/<package>/<version>/XXXX-NAME.patch
Where, XXXX is the patch number to be applied in order, like:
0001-some_patch_one.patch
0002-some_patch_two.patch
9999-some_patch_to_be_applied_last.patch
In the first patch series, all patches in the EXPERIMENTAL_PATCHES
option will be applied all at once, or none at all.
In a later [RFC] patch, I plan on adding finer tuned patch
enable/disable options based on the name of the patch and where it is
located in the patches/experimental sub-tree. So the name of the patch
should use underscores between words in the patch name.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@free.fr: slightly reword prompt]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Allow '-1' to be specified as CONNECTION_TIMEOUT to disable the use
of the connection timeout for wget.
Signed-off-by: Cody P Schafer <dev@codyps.com>
Message-Id: <cb33f8c2cbaf802d4f04.1399687632@localhost>
Patchwork-Id: 347582
Running as root is really, really dangerous.
Add a runtime-check that refuses to build if running as root.
Can be overriden with a double switch in the menuconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
It's been some time now we've had those features, so unmark them
being experimental.
It does not mean everything is perfect, but may gather some more
testing of those features.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
On some hosts, and for certain toolchains (eg. toolchain targetting
the upcoming Darwin), it may be necessary to pass arbitrary CFLAGS
and/or LDFLAGS when building the components.
And necessary infrastructure:
- EXTRA_{CFLAGS,LDFLAGS}_FOR_{BUILD,HOST} as config options
- pass those extra flags to components
Fix-up a slight typo in elf2flt at the same time (misnamed cflags).
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
Message-Id: <d24043276c9243a35421.1353077450@macbook-smorlat.local>
Patchwork-Id: 199645
Add an option that, when a command fails:
- starts an interactive shell with the failed command's environment
- attempts re-execution of the failed command, continues, or aborts
at user's whim.
Before starting the debug-shell, the backtrace is printed.
When exiting for an abort, the standard error message is printed.
Based on an idea and a patch from: Johannes Stezenbach <js@sig21.net>
http://sourceware.org/ml/crossgcc/2012-09/msg00144.html
Signed-off-by: Johannes Stezenbach <js@sig21.net>
[yann.morin.1998@free.fr: integrate in the fault handler]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Johannes Stezenbach <js@sig21.net>
Patchwork-Id: 191571
Patchwork-Id: 191668
Add a generic custom location infrastructure (inspired by the one in
kernel/linux) to allow the user to use custom tarballs or directories
for any component.
Signed-off-by: "David Holsgrove" <david.holsgrove@xilinx.com>
[yann.morin.1998@free.fr: move config option, improve help text, fix API doc]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <131c163c69f9cc81d2be.1349931191@localhost.localdomain>
PatchWork-Id: 190784
Message-Id: <0bbaba9190a76ba97f72.1349931192@localhost.localdomain>
PatchWork-Id: 190785
Currently, if downloads are forbidden, the mirror is still tried for.
Change this way:
- if downlaods forbidden, do not try neither upstream locations nor mirror
- add option to only use the mirror, and avoid upstream locations
Signed-off-by: Austin Morton <austinpmorton@gmail.com>
[yann.morin.1998@free.fr: broaden the if USE_MIRRORto enclode mirror location]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add support for building the HTML and PDF manuals for the major
components. Implement for binutils, GCC, GDB, and GLIBC.
Always build all manuals and install a subset. Be explicit about the
subset to reduce the clutter and to avoid getting copies of common
manuals like bfd from all of the sourceware based components. Downside of
being explicit is that you need to update it when a new component
comes along.
Build the manuals as part of the last GCC build, namely 'cc' for glibc
based ones and cc_core_pass_2 for baremetal.
An example of the output is at:
http://people.linaro.org/~michaelh/incoming/crosstool-NG/
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: depends on ! remove docs; gold manual install]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It's been a while now that crosstool-NG has been hosted on it's own
website, and not at my home. Change every reference to the old site
to the new one, everywhere is makes sense to.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Allow the user to configure extra flags to pass to the host compiler
at build time. Applies to both C and C++.
Useful on Ubuntu to turn off the stack protector and fortify defaults
so the program stands a better chance of running on other distros.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: put the custom flags at the end]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When CT_PARALLEL_JOBS is -1, set the number of parallel jobs to the
number of online CPUs + 1. Update documentation to match.
I find this useful when building in the cloud. You can use the same
.config file and have the build adapt to the number of processors
available. Limited testing shows that NCPUS+1 is faster than NCPUS+0
or NCPUS+2.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
Currently, the mirror can be used either:
- as a fallback in case upstream is unavailable (default behavior)
- as the preferred source for downloads
But the most common use-case seems to provide a truely-LAN mirror
to speed up downloads in big corpos', and/or provide a 'trusted'
source for the tarballs.
So, make the following changes;
- if a mirror is specified, always try that before trying upstream
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
kconfig bools are disabled by default, so specifying 'default n' is useless and
noisy. This patch removes all occurrences of 'default n'.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
In certain circumstances, removing the destination/installation directory
is a bad idea. For example, when the build environment is already taking
care of sanitising the build tree, and pre-installs stuff in there, it is
a very bad idea to remove the destination directory.
This happens now in buildroot, as the crostool-NG backend now installs the
toolchain in the common host-tools directory, and pre-install there a few
host-utilities (eg. host-automake and host-gawk).
Provide a config knob to turn on/off the removal of the destination
directory, defaulting to 'y' (previous behavior), and forced to 'n' when
used as a backend.
Reported-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
'targets' is not really meaningfull.
'build' means what it means.
'.build' just hides it as well! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Parallel downloads can be a bit harsh on the servers,
and some will fail (eg. uclibc.org) in some cases.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
To reduce filesizes of the toolchain and even improve build times
of projects to be build with this toolchain it is usefull to strip
the delivered toolchain executables. Since it is not likely that we
will debug the toolchain executables itself we do not need the
debug information inside the executables itself.
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Hide the prompts for some behavioral options, for which the upper-layer build
system is responsible for:
- parallel jobs and maximum load
- use pipes
- use custom shell
When crosstool-NG is used as a backend, it is the responsibility of the
upper-layer build-system to properly set paths, so we just hide the
prompts in this case.
When acting as a backend for a build-system, we should not build
any application that runs on the target, that is:
- no native gdb
- no companion libraries
- no binutils libraries
- no debug tools (save for gdbserver)
- ...
Here, we simply prepare the (hidden) config option that will detect
that we are acting as a back-end.
Update doc accordingly.
