This commit adds architecture support for LoongArch.
The toolchain currently only supports the 64-bit target
loongarch64-unknown-linux-gnu.
It has been tested to build with GCC 12.1, GDB 12.1, Glibc 2.36, Linux
5.19 and Binutils 2.39 as of Aug 2022.
Signed-off-by: Jiajie Chen <c@jia.je>
libsanitizer is only supported on selected architectures. Add
ARCH_SUPPORTS_LIBSANITIZER and have architectures select this option
based on the list of supported configurations from GCC's
libsanitizer/configure.tgt. Support for mips64 was added in GCC12 so
this is an additional condition for the mips architecture.
Fixes#1733
Signed-off-by: Chris Packham <judge.packham@gmail.com>
fix conflict options when compiling multilibs on ARM based architecture.
"--with-arch", "--with-cpu", "--with-fpu", "--with-float", and
"--with-mode" should not be configured with "--with-multilib-list=list"
when configuring multilibs.
Signed-off-by: Chen Tao <t.clydechen@gmail.com>
Support for the SPE ABI was removed in GCC 9. Update the select to
GCC_REQUIRE_older_than_9 so that GCC 8.5 can be selected.
Fixes#1349, fixes#1666
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Restrict kernel to 5.11 and below (support for this arch has been
dropped in 5.12); rename the sample to match its name as printed by
`ct-ng show-tuple` (otherwise, `make saveconfig` does not update the
sample's configuration).
Signed-off-by: Alexey Neyman <stilor@att.net>
Alpha is a 64-bit only arch. The menu options only allowed 32 bitness to
be selected. This was harmless but confusing, update the config to
specify 64-bit only.
Fixes: #1506
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Add sample configuration for building cross toolchain for the TI PRU.
PRU cores are present in many of the BeagleBone single board computers.
More information about the PRU can be found in https://bbb.io/pru
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
-- c6x: Add support for c6x product families to pass on to uClibC-ng
-- c6x: Fix multilib support
-- c6x: Add patch fix internal instruction error (GCC 57295)
Signed-off-by: Dan Tejada <dan.tejada@cantada.com>
GLIBC 2.31 needs --with-cpu=ultrasparc for both 32/64-bits now, and
--with-cpu only sets the CPU model for the "primary" bitness.
Signed-off-by: Alexey Neyman <stilor@att.net>
Add initial rv64 support. Originally based on suggestions from
Franz Flasch <franz.flasch@gmx.at>.
Cc: Franz Flasch <franz.flasch@gmx.at>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Synopsys' DesignWare ARC Processors are a family of 32-bit CPUs
that SoC designers can optimize for a wide range of uses,
from deeply embedded to high-performance host applications in a variety
of market segments.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
This allows us to include the component-to-package relation in the
generated kconfig files and make use of that information in the
show-config.sh script.
Signed-off-by: Alexey Neyman <stilor@att.net>
- Glibc configure args and tuple need adjustment on SuperH
- Only allow "both endian" and "with CPU" for unspecified arch
variant. May reconsider endianness (was breaking things before
adjusting glibc tuple)
- Retire non-multilib sample, it should be a subset of the
multilib one now.
Signed-off-by: Alexey Neyman <stilor@att.net>
1. On SuperH, configuring GCC with explicit variant of the CPU
(like "sh4") limits the default set of multilibs to just that CPU
and requires --with-multilib-list to change. Allow for "unspecified"
variant, so that we can defer to GCC to determine the list.
2. Support toolchains with both endiannesses at the same time.
3. Add a SuperH/newlib sample
4. Add more flags processing for uClibc
Signed-off-by: Alexey Neyman <stilor@att.net>
Also:
- Move companion_* to comp_* to match the kconfig symbols
- Replace bootstrap with former gen-versions.sh
- Fold *.in.2 into their respective first parts; this moves common
options to the end - if it is undesirable, inclusion of *.in
can be moved where *.in.2 used to be (but that will also move
version selection after common options).
- Retire addToolVersion.sh (may later replace with a more
comprehensive script that tries to download the added tarballs,
copy the patches and try to apply them, and create a version.desc).
Signed-off-by: Alexey Neyman <stilor@att.net>
Gcc for Nios II does not support -mcpu option, and --with-cpu=XXX flag
breaks gcc compilation. Use --with-arch instead.
Signed-off-by: Kirill Smirnov <kirill.k.smirnov@gmail.com>
To build uClibc correctly we need correct endianness selected in the
crosstool-NG. Xtensa cores may be little- or big-endian, but this
property is static. The toolchain knows the core endianness and doesn't
need options to select it.
Enable ARCH_SUPPORTS_BOTH_ENDIAN and select LE by default. Specify empty
CT_ARCH_ENDIAN_CFLAG so that -m{big,little}-endian don't get added to
the TARGET_CFLAGS, as it's not supported by gcc. Specify empty
CT_ARCH_ENDIAN_LDFLAG so that -EB/-EL don't get added to the
TARGET_LDFLAGS as they are ignored. Select big-endian in the example
xtensa-unknown-linux-uclibc configuration.
This fixes uClibc toolchain build for little-endian cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Now that libc backend installs the libraries into the directory reported
by gcc as 'multi-os-directory', sh4 libraries are installed into a '!m4'
subdirectory. This directory then confuses GNU ld, which assumes the
exclamation mark to be a word separator and attempts to link to
'/usr/lib' (a directory). However, if multilib is enabled, the default
libraries are installed into the [expected] '/usr/lib/./'. This looks
like an artifact of SuperH's unique way of specifying the multilibs to
be built in GCC (which may list exclusions, starting with '!').
Signed-off-by: Alexey Neyman <stilor@att.net>
Since CUSTOM_LOCATION_ROOT_DIR was removed from config/global/paths.in
in commit c499ccb, xtensa should depend only on it's
ARCH_XTENSA_CUSTOM_OVERLAY_LOCATION.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The configure error mentioned in the commits that disable
--with-arch/--with-tune when --with-cpu is specified is specific to ARM
builds. For other architectures, it makes sense (hey, it even makes
sense for ARM - read 'info gcc'! - it is just a shortcoming of ARM
build, apparently).
Thus, add an arch setting ARCH_EXCLUSIVE_WITH_CPU (currently, set only
for ARM) that will trigger current behavior. Permit combinations of
--with-arch/cpu/tune for other arches.
Signed-off-by: Alexey Neyman <stilor@att.net>
The Xtensa processor architecture is a configurable, extensible,
and synthesizable 32-bit RISC processor core. Processor and SOC vendors
can select from various processor options and even create customized
instructions in addition to a base ISA to tailor the processor for
a particular application.
Because of the configurability, the build process requires one additional
step for gcc, binutils, and gdb to update the default configuration.
These configurations are packed into an 'overlay' tar image, and are
simply untarred on top of the default configuration during the build.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This commit removes blackfin support.
I'm open to re-adding blackfin after crosstool-1.23.0 is released, but
it is currently too difficult to port forward to newer versions of gcc
and uclibc.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This is a weird artifact from when mips64 was first introduced to ct-ng
and was never removed from experimental.
If you have problems building a mips64 toolchain, please report on the
mailing list or on github issues.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This change, as per #222, reduces the number of supported releases of
gcc to the latest branch releases.
I noticed while doing this work that gcc-4.5.4 was never added, so I
moved patches for gcc-4.5.3 to 4.5.4 and updated the
bfin-unknown-linux-uclibc example. Also, 120-siginfo.patch was fixed
upstream in the 4.5.4 release, so this patch is omitted.
I also bumped the avr sample to 4.9.3 from 4.9.2.
With the addition of gcc-5.x, the gcc release team now releases the
major.minor.0 versions, while updates to the branch are available in
svn/git. We'll address that when we get to issue #219. This change just
removes CC_GCC_5_1 and moves CC_GCC_5_2 to CC_GCC_5, and removes
CC_GCC_5_1_or_later and moves CC_GCC_5_2_or_later to CC_GCC_5_or_later.
This is the first of two part changes, as mentioned in #222.
This change is slated for release in 1.22.0. The next change will be
slated for 1.23.0, and will limit gcc versions to what is on
https://gcc.gnu.org under "Release Series and Status", which is
currently 4.9.3 and 5.2.0, although I will also support the previous
supported version. In this example that would be 4.8.5.
Last, but not least, this change also retires AVR32 support.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit adds support for the Atmel AVR 8-bit RISC architecture.
This is the first 8-bit architecture to be added to crosstool-ng so the
configuration options for 8-bit architectures are added here as well.
gcc has had support for AVR for quite a while, at least since the 4.3
series for the currently popular ATmega microcontroler series.
The AVR architecture only supports bare-metal toolchains.
gcc for the AVR 8-bit architecture, usually referred to as avr-gcc, is
commonly used in conjunction with the avr-libc library which provides
additional resources for the Atmel AVR 8-bit microcontrollers.
avr-gcc can also be found as a supported package in some recent Linux
distributions.
This commit also closes#66
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
As posted on http://www.eglibc.org/
====================
EGLIBC is no longer developed and such goals are now being addressed
directly in GLIBC.
====================
I'm not interested in maintaining build support for unsupported
software.
Older branches of crosstool-ng continue to have eglibc support.
If you find issues with older branches, I'm always open to pull
requests.
Removing eglibc also frees up glibc cleanup and build optimization.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
