After building the cross toolchain and compile a simple C program,
objdump reports debug information even though -g modifier was not
used. These debug segments are in glibc library and CRT files. So
a new config entry: CT_GLIBC_ENABLE_DEBUG was added to control when
we want to add debug information to glibc, by default is enabled.
Signed-off-by: Guillermo E. Martinez <guillermo.e.martinez@oracle.com>
Commit 6d5227b6 ("Remove obsolete glibc 2.12.1") removed supports for
the separate glibc-ports but also removed GLIBC_USE_PORTS_ADDON. Glibc
versions up to 2.20 bundled support from some architectures in the ports
directory so GLIBC_USE_PORTS_ADDON is required to support these older
glibc versions.
Fixes#1736
Signed-off-by: Chris Packham <judge.packham@gmail.com>
glibc 2.12.1 was marked as obsolete. Now that the 1.25.0 release is out
this version can be removed completely. As glibc 2.12.1 was the last
remaining version supported by glibc-ports support for glibc-ports is
also removed.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
The bionic libc support was out of date and relied on downloading
binaries from the internet. It was already marked as obsolete. Now that
the 1.25.0 release is out it can be completely removed.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
With libc_headers step before pass-1, there is no need to distinguish
pass-1 and pass-2; they are configured identically (note that with the
current configuration, core pass-2 is only used for win32 - hence, uses
build_libgcc=yes and mode=static).
Signed-off-by: Alexey Neyman <stilor@att.net>
After 557b9d4, libc_start_files and libc_main steps are performed one
after another. It doesn't make sense, especially since some of the libcs
(glibc, uClibc-ng) go to great lengths to first install start files in
the first step, libc_start_files, only to remove them immediately in the
second step, libc_main.
Current build steps also break in the xtensa newlib configurations, as
it needs to install the custom xtensa headers before building the libgcc
and after 557b9d4, the headers are not installed before libgcc is built
in pass-1.
Therefore, finish what 557b9d4 mentioned but did not do: move header
installation into a new step, libc_headers, and combine libc_start_files
and libc_main into a single step.
This also allows to combine the core pass-1/pass-2 steps, to be done in
a subsequent commit.
Signed-off-by: Alexey Neyman <stilor@att.net>
... and the code dependent on them, after the latest wave of obsolete
package removals. This concludes the glorious history of the original
uClibc (non-NG) with lots of kludges removed.
There was a choice here, whether to call the resulting libc "uClibc" or
"uClibc-ng". I opted in favor of giving uClibc-ng the recognition it
deserves, although it had some ripple effect in the ct-ng code.
Signed-off-by: Alexey Neyman <stilor@att.net>
Issue #1535
GCC 10 changed the default to -fno-common, which leads to a linking error in GLibc older than 2.30.
This change adds -fcommon cflag for the target GLibc versions <=2.29 and GCC >=10.
This change also adds additional cflags for the target GLibc to disable
new GCC11 checks that lead to compilation errors.
Signed-off-by: Nik Konyuchenko <spaun2002mobile@gmail.com>
By setting glibc build system default_cflags to be empty before
building, we will enforce the build system to only use the crosstool-ng
CFLAGS when building glibc.
Properly solves the issue identified in #1396.
Signed-off-by: Hans-Christian Noren Egtvedt <hegtvedt@cisco.com>
This adds support for using picolibc instead of newlib on embedded
systems.
Signed-off-by: Keith Packard <keithp@keithp.com>
v2:
Add check for meson and ninja
Sync option default values with current picolibc defaults
Remove xtensa sys header file install as those aren't in picolibc
This commit adds support for the newlib configuration option
'--enable-newlib-retargetable-locking'.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
I was trying to build static binaries for a range of Broadcom soft-float ARMv7
SoCs and kept getting SIGILL, although I was targeting Cortex A7 (and A5,
later), even on A9 and A15.
I found out that once I add -msoft-float, +mp+sec is to blame:
Attribute Section: aeabi
File Attributes
- Tag_CPU_name: "7VE"
+ Tag_CPU_name: "7"
Tag_CPU_arch: v7
- Tag_CPU_arch_profile: Application
- Tag_ARM_ISA_use: Yes
Tag_THUMB_ISA_use: Thumb-2
Tag_ABI_PCS_wchar_t: 4
Tag_ABI_FP_rounding: Needed
@@ -12,8 +10,5 @@ File Attributes
Tag_ABI_FP_number_model: IEEE 754
Tag_ABI_align_needed: 8-byte
Tag_ABI_enum_size: int
Tag_ABI_optimization_goals: Aggressive Size
Tag_CPU_unaligned_access: v6
- Tag_MPextension_use: Allowed
- Tag_DIV_use: Allowed in v7-A with integer division extension
- Tag_Virtualization_use: TrustZone and Virtualization Extensions
(This is the readelf -A diff, before and after armv7-a+nofp -> armv7+nofp).
I kept getting SIGILL even after building my application with a toolchain built
with the correct CFLAGS and found out that crosstool-ng doesn't pass the host
CFLAGS when building musl, which pollutes my binary with these ARMv7 extensions.
Signed-off-by: Dima Krasner <dima@dimakrasner.com>
The glibc will append the content of the CFLAGS variable,
overriding previous flags.
If unset, the CFLAGS variable is not empty, so explicitly set it.
Instead prepend the default CFLAGS flags.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
uclibc_backend_once tries to build dummy shared libraries regardless of
whether shared libraries support for target is enabled or not, resulting
in build failure in noMMU bFLT configuration.
Only build dummy shared libraries when shared library support for target
is enabled.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
uClibc-ng 1.0.31 enabled FDPIC as an option for ARM/no-MMU
configurations and defaults to that option if not set explicitly.
Signed-off-by: Alexey Neyman <stilor@att.net>
Otherwise, glibc 2.29 tries to use it - but we haven't built libstdc++ yet.
We really need to implement #808... Until now, pass empty CXX to make.
Signed-off-by: Alexey Neyman <stilor@att.net>
... which, after a recent change, is not reflected into CT_ALL_TARGET_CFLAGS
for non-multilib configurations.
Signed-off-by: Alexey Neyman <stilor@att.net>
... in uClibc and glibc.
Fixes#681.
While here, relocate additional "sources" for uClibc/binutils into packages/
directory.
Signed-off-by: Alexey Neyman <stilor@att.net>
This required some rework of the libc selection, as moxiebox is a layer on
top of another libc - newlib.
Also, moxiebox'es host VM (`sandbox`) needs a libcrypto on the host. We will
not have it if we're cross-compiling a canadian cross. Fortunately, all moxiebox
needs from libcrypto is SHA256, and it already includes a standalone implementation
of SHA256 in its runtime. Provide a little wrapper that allows moxiebox use
that implementation for the host binary, too.
Also, automate collecting/printing the list of all packages in a given category
(e.g. LIBC or COMP_TOOLS), generate a list of all Kconfig symbols for a given
category.
Signed-off-by: Alexey Neyman <stilor@att.net>
Modify CT_TARGET_CFLAGS (which are passed to GCC's FOR_TARGET flags) rather
than CT_ALL_TARGET_CFLAGS.
Fixes#1006.
Signed-off-by: Alexey Neyman <stilor@att.net>
- Incompatible function type for ifunc alias
- Multiple statements macro expansion in strftime
- if_nametoindex size checking
Signed-off-by: Alexey Neyman <stilor@att.net>
... in the corresponding /lib directory. Mingw-w64 installs it to /bin,
so multiple variants in a multilib configuration override each other.
Signed-off-by: Alexey Neyman <stilor@att.net>
