Signed-off-by: Zhenqiang Chen <zhenqiang.chen@linaro.org>
[yann.morin.1998@anciens.enib.fr: prompt rewording, as suggested by M. Hope]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add support for building the HTML and PDF manuals for the major
components. Implement for binutils, GCC, GDB, and GLIBC.
Always build all manuals and install a subset. Be explicit about the
subset to reduce the clutter and to avoid getting copies of common
manuals like bfd from all of the sourceware based components. Downside of
being explicit is that you need to update it when a new component
comes along.
Build the manuals as part of the last GCC build, namely 'cc' for glibc
based ones and cc_core_pass_2 for baremetal.
An example of the output is at:
http://people.linaro.org/~michaelh/incoming/crosstool-NG/
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: depends on ! remove docs; gold manual install]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
ARM compilers can be built for soft float (software only, floats in
core registers), hard float (uses floating point instructions, floats
in FPU registers), or the half-way house softfp (uses floating point
instructions, floats in core registers).
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some architectures support a mixed hard/soft floating point, where
the compiler emits hardware floating point instructions, but passes
the operands in core (aka integer) registers.
For example, ARM supports this mode (to come in the next changeset).
Add support for softfp cross compilers to the GCC and GLIBC
configuration. Needed for Ubuntu and other distros that are softfp.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
With the upcoming softfp support, the case..esac test would become
a bit convoluted if it were to test three different booleans.
Introduce a new blind string config option that defaults to the
selected floating point type used.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It's been a while now that crosstool-NG has been hosted on it's own
website, and not at my home. Change every reference to the old site
to the new one, everywhere is makes sense to.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, we check host feature in ./configure. This works only for
cross toolchains, but not for canadian toolchains. ./configure has
absolutely no way to know what the host for the toolchain will be;
only the build scripts know.
So, move the headers & libraries checks from ./configure to the build
scripts, early enough in the build, but not before we know the host
compiler and other tools.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add a new option to enable/disable the Python scripting in gdb.
Hide the option (ie. disable it) when statically linking the cross-gdb.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Allow the user to configure extra flags to pass to the host compiler
at build time. Applies to both C and C++.
Useful on Ubuntu to turn off the stack protector and fortify defaults
so the program stands a better chance of running on other distros.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: put the custom flags at the end]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
binutils 2.21 doesn't recognise the Cortex-M3 SVC instruction when
assembling with -mcpu=all. This was fixed by the 2.21.53 snapshot and
is needed to build RTOSs such as FreeRTOS.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
When CT_PARALLEL_JOBS is -1, set the number of parallel jobs to the
number of online CPUs + 1. Update documentation to match.
I find this useful when building in the cloud. You can use the same
.config file and have the build adapt to the number of processors
available. Limited testing shows that NCPUS+1 is faster than NCPUS+0
or NCPUS+2.
Signed-off-by: Michael Hope <michael.hope@linaro.org>
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split gcc/gdb in two patches]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Michael Hope <michael.hope@linaro.org>
[yann.morin.1998@anciens.enib.fr: split gcc/gdb in two patches]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Allows using either a tarball or a directory as the custom kernel
source location.
Signed-off-by: Vincent BENOIT <sinseman44@gmail.com>
[yann.morin.1998@anciens.enib.fr: fix space damage, detailed commit message]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Recently, all binutils versions have been renamed after a GPL compliance
issue was found and fixed in binutils;
http://sourceware.org/ml/binutils/2011-08/msg00198.html
Although legacy symlinks have been put in place, we should now use
the new, real version strings.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Recently, all binutils versions have been renamed after a GPL compliance
issue was found and fixed in binutils;
http://sourceware.org/ml/binutils/2011-08/msg00198.html
Old versions are no-longer available since the rename (eg. 2.19 has been
superseeded by 2.19.1, and only 2.19.1a was regenerated).
Remove now-missing versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Almost all versions have been renamed, but the gdb folks did not
setup legacy symlinks.
For more information, see this message:
http://sourceware.org/ml/gdb/2011-09/msg00002.html
Reported-by: ManuelStahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Finally fix typo introduced in #6eb0189d7225 and partially fixed in
#61ec8b08f98d...
Seems I'm fast at introducing trivial typoes, but bad at fixing them... :-(
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Having the crosstool-NG version in the .config helps in case we
want to reproduce the toolchain with the exact same version of
crosstool-NG.
This also reverts #bb73e7632b54.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Allows to choose if one wants to keep or not the syscalls that are provided with
newlib. It passes the --disable-newlib-supplied-syscalls or
--enable-newlib-supplied-syscalls to the configure script. If one chooses to
disable the builtin syscalls, he/she will have to write his/her own. This can
be usefull to port newlib to a new platform/board.
Signed-off-by: Kévin PETIT <kpet@free.fr>
Virtually all our targets do support stack unwinding. For some of
them, ./configure can't detect that, and the build fails later on.
So, default to force unwind, and let the user disable it if it
breaks in his/her case.
The previous changeset (f44286235a07) was empty, as spotted by Benoît.
Reported-by: Benoît THÉBAUDEAU <benoit.thebaudeau@advansee.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Simplify the way the custom tarball is handled:
- fake version="custom"
- at download, simply link the custom tarball to:
"linux-custom.${custom_extension}"
- at extract, the above allows to simply extract "linux-${LINUX_VERSION}"
where LINUX_VERISON is set to the fake version="custom"
Not that much convoluted, in fact... :-/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
No-one ever inquired about this feature. Due to the way it works, it is
rather unlikely that every user used a properly-formatted tarball, or a
properly structured directory as imput.
Beside, it is not really easy to maintain: I just spent one full day
remembering how it worked... Sigh... :-(
Just deprecate this, until next release, or until someone complains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, the mirror can be used either:
- as a fallback in case upstream is unavailable (default behavior)
- as the preferred source for downloads
But the most common use-case seems to provide a truely-LAN mirror
to speed up downloads in big corpos', and/or provide a 'trusted'
source for the tarballs.
So, make the following changes;
- if a mirror is specified, always try that before trying upstream
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
svn is needed to download eglibc from the upstream repository.
In some situations, though, it can happen that:
- the developpers' machines do not have svn
- a LAN mirror has been set-up with pre-downloaded eglibc tarballs
In this case, it makes sense not to hard-depend on svn.
So, if svn is missing, just say so, and add a comment in the
menuconfig.
Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This patch adds partial support for glibc locales.
For now, it only generates the appropriate locales when the host and the target
have the same endianness and uint32_t alignment.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds a common glibc/eglibc infrastructure to build and install the
libc locales.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Even if gcc itself does not require GMP or MPFR (eg. gcc-4.2 and before
don't), building the fortran frontend always required those companion
libraries.
Select them if the Fortran language is selected.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This patch bumps the Linaro GCC revisions to 2011.07 when applicable.
Note that the `-0' suffix has been removed from the Linaro versioning scheme
beginning with this version.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Maintaining thos multi-line shell commands in a Makefile rule is
a real PITA.
Move the two affected rules (build_gen_choice_in and build_gen_menu_in
to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
cvs is used to get newlib directly from its repository. Missing cvs
will only allow getting newlib from the released tarballs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Static liunking is not supported on Darwin, so hide the corresponding
options when the build machine is Darwin.
Reported-by: Andrea Franceschini <therealmorpheu5@gmail.com>
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Reported-by: "Titus von Boxberg" <titus@v9g.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add the following MIPS specific options when configuring gcc:
--with(out)-llsc
--with(out)-synci
--with(out)-mips-plt
--with-divide=type
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add an option to specify the hash type that gcc will ask the linker to use.
It is a provision for the upcoming 4.7, as no version currently supports it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add an option to configure gcc with --enable-linker-build-id.
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Instead of getting eglibc over standard svn://svn.eglibc.org
Add an option that allows the user to get source from
http://www.eglibc.org/svn
This is useful if you are behind a firewall or proxy.
If you are behind a proxy, don't forget to configure
${HOME}/.subversion/servers
In the [global] section setup your proxy configuration.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@anciens.enib.fr: removed useless 'default n']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The patchset was obtained by dumping each changeset on the
upstream 0.9.32 branch since the release:
git log v0.9.32..origin/0.9.32 |sed -r -e '/^commit/!d; s/.* //;' |tac
and then creating a patch from each changeset.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Cross-gdb depends on expat and python. If either is missing, cross-gdb will
build successfully, but lacking some features.
Especially, if expat is missing, cross-gdb will be unable to parse the target
description, which may lead to runtime malfunctions and the following GDB
warning:
"Can not parse XML target description; XML support was disabled at compile time"
Hence, expat should be considered mandatory.
On the other hand, the features missing without python are not critical, so
python should not be considered mandatory.
This patch does the following:
- At configure time, warn the user if either expat or python is missing.
- In menuconfig, disable the static build options regarding cross-gdb if no
static version of expat is available, and disable cross-gdb if expat is
missing.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
[yann.morin.1998@anciens.enib.fr: add comment for impossible static cross-gdb]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"crosstool-NG-${CT_VERSION}" is currently the default for TOOLCHAIN_PKGVERSION,
and this options is passed as is to --with-pkgversion.
This patch prepends "crosstool-NG ${CT_VERSION}" to TOOLCHAIN_PKGVERSION before
passing it to --with-pkgversion.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Hide the staticaly linked libstdc++ option if the static libstdc++ is not
present, detected at configure time.
Add a blind option that says whether static linking is possible at all.
It defaults to 'y', but depends on the needed CONFIGURE_* options. For
now, it only depends on static libtdc++, but new dependencies can be
easily added.
Hide the global static toolchain option behind this new option.
Original patch by Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This patch makes gdb benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch makes eglibc benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch makes binutils benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch promotes the PKGVERSION and BUGURL options to toolchain level so that
all toolchain components supporting them can benefit from them.
These options are passed to configure through --with-pkgversion and
--with-bugurl.
They are supported by binutils 2.18+, gcc 4.3+, eglibc 2.9+ and gdb 7.0+.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds a blind option CC_GCC_HAS_PKGVERSION_BUGURL to test the support
of --with-pkgversion and --with-bugurl by GCC's configure.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
kconfig bools are disabled by default, so specifying 'default n' is useless and
noisy. This patch removes all occurrences of 'default n'.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
If check_for is able to find the required prog/inc/lib, allow it to
set an arbitrary variable to 'y'. This variable is then pushed down
to the kconfig definition.
For example:
has_or_abort prog=foobar kconfig=has_foobar
If foobar is available, it yields a kconfig variable defaulting to y:
config CONFIGURE_has_foobar
bool
default y
If foobar is missing, it yields a kconfig variable defaulting to n:
config CONFIGURE_has_foobar
bool
Thus it is possible to depends on that variabel to show/hide options:
config SOME_FEATURE
bool
prompt "Some feature"
depends on CONFIGURE_has_foobar
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Update help entries for thos variables that accept multiple
arguments with spaces (aka. array-capable variables).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Make it explicit that a variable is an array bu the name of the variable.
It will be used later when .config gets munged to allow both multiple
arguments and arguments with spaces at the same time to be passed from the
configuration down to the build scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Now that kconfig can include a file multiple times, link the glibc/eglibc
common stuff to two .in.2 files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The latest kconfig stuff is more stringent when it comes to validating
the dependency of the symbols. It is no longer possible to have a symbol
depend on itself (such as our construct for arch/cc/libc/... was doing).
Fix our generated-file infrastructure to avoid these situations when the
new kconfig stuff will be merged (in a following changeset).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Since the gcc configuration changes, the way to select the
dependent companion libraries has changed. The addToolVersion
script was not updated to match, and a new gcc version was
added with this script.
Fix the gcc version; the script will be updated in a subsequent
changeset.
Reported-by: Xun Li <lxfind@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It can be quite confusing for a new-comer to find strange
version numbers for gdb, so hide the Linaro versions by
default.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Move options around so it feels more organised.
Add comments to separate groups of related options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Re-organise the sub-menu so that:
- the kernels list comes first,
- followed by kernels generic options
- followed by kernels specific options
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Re-organise the sub-menu so that:
- the archs list comes first,
- followed by archs generic options
- followed by archs specific options
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In backend mode, setting the sysroot name is the
responsibility of the upper-layer build system.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Managing the shared version of the companion libraries
has become cumbersome.
Also, it will one day be possible to use the companion
libraries from the host distribution, and then we will
be able to easily use either shared or static libs.
As a side note, while working on the canadian-rework
series, it has become quite more complex to properly
handle shared companion libraries, as they need to be
built both for the build and gost systems. That's not
easy to handle. At all.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
gold can not build glibc/eglibc, force use of the BFD
linker during the toolchain build.
Reported-by: Bill Pringlemeir <bpringle@sympatico.ca>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
gold is not capable of building glibc/eglibc, so we have to
force using the BFD linker, ld.bfd.
Offer a blind option that affected components can select to
force use of the BFD linker during the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
gold is not capable of building glibc/eglibc. See this thread:
http://sourceware.org/ml/crossgcc/2011-04/msg00010.html
Reported-by: Bill Pringlemeir <bpringle@sympatico.ca>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The gold linker does currently support only a limited set of architectures:
- x86 (32- and 64-bit)
- ARM
Hide the gold option for other architectures.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add support for building SPARC targeted toolchain.
With this patch I have built a working sparc V8 (32 toolchain).
Testing shows that not all gcc versions works well:
4.4.1 OK (kernel builds and the final kernel can boot)
4.4.2 Not tested
4.4.3 Not tested
4.4.4 BAD (Kernel can build but fails during boot)
4.4.5 BAD (Kernel can build but fails during boot)
4.5.1 BAD (Build fails with a spill related ICE - http://gcc.gnu.org/bugzilla/show_bug.cgi?id=35664)
4.5.2 OK (kernel builds and boots)
I have successfully been using the 4.5.2 version for a few months.
This patch does not add support for the LEON variant.
That may come later.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[yann.morin.1998@anciens.enib.fr: for 32-bit, default CT_TARGET_ARCH is OK]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
PPL 0.11+ installs three libs: lippl, libppl_c and libpwl.
libppl_c has a dependency on libpwl (at least for watchdog stuff).
While gcc correctly links with libppl and libppl_c, it does not
pull libpwl in. In case of shared libs, this is not a problem, as
libppl_c has a NEEDED dependency on libpwl. But for static libs,
that does not work. Although libppl_c.la exists and has a correct
dependency on lipwl, somehow gcc misses it. So we have to force
pulling libpwl when needed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It can be quite confusing for a new-comer to find strange
version numbers for gcc, so hide the Linaro versions by
default.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Before gcc 4.6 was released, Linaro has a pre-release available.
Include that version in the config list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
So far, we've had a version always select appropriate _or_later option,
which in turn would select all previous _or_later options.
Because the dependencies on companion libs were cumulative, that was
working OK. But the upcoming 4.6 will no longer depend on libelf, so
we can't keep the cumulative scheme we've been using so far.
Have each release family select the corresponding dependencies, instead
of relying on selecting previous _or_later.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Plugins are shared objects, and when building a toolchain statically,
the gcc build system breaks havok (although there is no hard technical
reasons it should not be possible)...
And consequently, do not enable plugin supoprt in binutils.
Reported-by: Thomas Spurden <thomas@ado.is-a-geek.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In fact, it is only supported in a few legacy versions.
Keep LT available for all eglibc versions, although it might need
a similar safeguard...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
By default, recent versions of glibc and eglibc will build some
functions that take format strings (eg. printf, syslog...) with
run-time checks against some format string attacks. This is
called a fortified build.
Unfortunately, this fails somehow while building the instrumented
version of syslog, with some kind of circular dependency...
Disable fortified builds by default, and hide the enabling option
behind EXPERIMENTAL for daring users...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
I haven't noticed the usual experimental testers complain about eglibc
2.11 or 2.12 being unstable. So stop marking them as experimental.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
We make it an option, as not all combinations of architectures
vs. compiler vs. glibc/eglibc exhibit the issue. Mostly visible
on old glibc versions, it seems...
This is a missing part from the glibc/eglibc merger... :-/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Enabling plugins in binutils is not enough, and gcc also
needs to be ./configured with --enable-plugins, although
this is not documented anywhere... :-/
Reported-by: karthik duraisami <kdconstant@hotmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Since the advent of make-3.82, some packages now break due to changes
in make-3.82, being stricter than 3.81 when interpreting the Makefiles.
This has bugged us a bit too much so far, and I believe fixing all
of them is a long road, while simply building make-3.81 is the easiest
route for now.
Of course, in the long term, packages will get fixed upstream, and we
should back-port the fixes to old versions, and get rid of building
make-3.81. In the meantime...
Reported several times on the mailing list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In certain circumstances, removing the destination/installation directory
is a bad idea. For example, when the build environment is already taking
care of sanitising the build tree, and pre-installs stuff in there, it is
a very bad idea to remove the destination directory.
This happens now in buildroot, as the crostool-NG backend now installs the
toolchain in the common host-tools directory, and pre-install there a few
host-utilities (eg. host-automake and host-gawk).
Provide a config knob to turn on/off the removal of the destination
directory, defaulting to 'y' (previous behavior), and forced to 'n' when
used as a backend.
Reported-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Use of the sysroot is highly recommended, and the non-sysroot case is
both obsolete and not widely tested.
Before the non-sysroot case can go away, deprecate it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Depending on local policies, some users have expressed a need to
have the sysroot be named differently than the hard-coded name.
Add an option for that.
Default to 'sysroot' to match the existing literature.
While at it, replace 'sys-root' with 'sysroot' everywhere we
reference the sysroot.
Reported-by: Alexey Kuznetsov <Alexey.KUZNETSOV@youtransactor.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This is an obsolete version which is no longer used by any sample (the only
user, the ia64 sample, has been removed).
It also makes the code path a bit complex, with twists just to accomodate
that version. Removing the version will make those twists go away, and
will ease commonalisation of glibc and eglibc in the future (hopefully!).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
ia64 is broken in every gcc/glibc combinations I tested (except for the
existing sample that used very old versions).
Nobody complained on the list about not being able to build recent versions.
So the only way forward I can see is to remove the architecture altogether.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When both gold and ld are installed, add a wrapper that calls
to either gold or ld.
In case the wrapper is installed, we also need to symlink ld.bfd
and ld.gold for the core_cc steps.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When configured with support for threads, gold can link in
parallel, possibly cooperating with a make jobserver.
Add an option enabling threads.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
gold is a new, optimised, multi-threaded linker with support
for plugins.
Add support for gold starting with binutils 2.21. Although 2.20
also had gold, the configure flags have changed, and supporting
2.20 would be a mess in the code.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add BINUTILS_2_21_or_later blind option. It will be used to add
conditional support for building 'gold' on versions that have it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In the previous patches to glibc and uclibc, we standardized on hidden
version names:
LIBC_<LIBC NAME>_V_<VERSION>
This patch updates EGLIBC to be the same for consistency to:
LIBC_EGLIBC_V_<VERSION>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Hidden version names for uClibc conflicted:
LIBC_UCLIBC_V_0_9_30_2
LIBC_V_0_9_30_1
name them constantly as:
LIBC_UCLIBC_V_<version>
Also update the build script where we use snapshots by version or snapshots by date.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
- add 2.6.36.2.
- bump to 2.6.35.10, which is a new longterm.
- bump to 2.6.32.27 and 2.6.27.57, the two old longterms.
- update longterm descriptions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Building non-threaded glibc has been unsupported for a long time, now:
http://sourceware.org/ml/libc-alpha/2005-08/msg00091.html
As eglibc is a spin-off of glibc: ditto.
So do not offer that possibility in the menuconfig.
Thanks to Thomas Petazzoni for spotting, and helping to solve, the issue!
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
If the global static option is set, then build the final gcc statically.
Signed-off-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
If the global static option is set, then build binutils statically.
Signed-off-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
If the global static option is set, then build host binutils statically.
Signed-off-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
If the global static toolchain option is selected, then do not
prompt the user whether to build shared companion libraries.
Signed-off-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add a config option to statically build the host tools.
Impacted tools can use that option to decide wether to build
statically or shared.
For now, no tool uses it, but they'll be added one at a time
in the next commits.
Signed-off-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This rules out 0.15.5 and previous versions, that did not
have this option, so remove them from the list. Anyway,
they were marked 'OBSOLETE', so it's not a big loss...
[Yann E. MORIN: remove obsolete versions]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When the toolchain has no support for shared libraries, there is no
point in installing the cross-ldd helper.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Adds support to enable/disable IOs of floating point values
(float, double, and long double).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
libssp is the run-time Stack-Smashing Protection library.
It can be usefull to have or miss, depends...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
libgomp is the GNU implementation of the OpenMP API.
It can be usefull to have or miss, depends...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It makes sense to have all library-related config knobs in
the same place; and it makes sense to have all other misc
config knobs in the same other place.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Directly select-ing the required companion libraries means we can not
disable them. That's OK for now, as we systematically build them when
they are required.
But with distros coming up-to-speed, we will need to disable the build
later-on.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
To decide whether we need to backup the companion libraries,
do not rely on the !shared case. In the future other cases
may require not to save the companion libraries (eg. if using
the ones provided by the host distro).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
While GMP and MPFR are required by gcc>=4.3 (to build the frontends),
and MPC is required by gcc>=4.5, the other libs are not. If they are
present then gcc will enable advanced features; if they are missing,
then gcc will (should) simply disable those features.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This adds selection for one of the o32, n32 and n64 ABIs.
Later, we can easily use those boolean options, rather than
relying on a user-supplied string option.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Move the arch-specific options to the second-part of
the generated files, so they appear after the generic
options, but before the optimisations.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
'targets' is not really meaningfull.
'build' means what it means.
'.build' just hides it as well! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Remove those versions whose series does no longer appear on the
front page of kernel.org
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The help entries for each of the companion libraries are now
wrong, and anyway are not displayed. Nuke, nuke, nuke...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
As there's no longer any user of the companion libraries on the
target, nuke the build for the target.
Well, at least, there's libelf that's still needed by ltrace, so
we keep it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Although the gdb ./configure advertises for GMP and MPFR, those libraries
are not used by gdb (the ./configure is used across different packages,
hence the check for GMP/MPFR). See:
http://sourceware.org/ml/crossgcc/2010-08/msg00168.html
The same applies to MPC.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
sstrip is causing more trouble and grief than tolerable.
It is broken at least on PPC. It does not build on non-ELF
systems (eg. mingw32, MacOS-X...). Plus, it is easy to
install.
Hide it behind OBSOLETE.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Parallel downloads can be a bit harsh on the servers,
and some will fail (eg. uclibc.org) in some cases.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This version has been released a couple of month ago, but it never reached
crosstool-ng tree. This may be linked to the fact that the current 0.9.30.2,
once patched, has nothing much different from 0.9.30.3, released.
I'm not including any patch with this upgrade, on purpose.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
To reduce filesizes of the toolchain and even improve build times
of projects to be build with this toolchain it is usefull to strip
the delivered toolchain executables. Since it is not likely that we
will debug the toolchain executables itself we do not need the
debug information inside the executables itself.
Signed-off-by: Remy Bohmer <linux@bohmer.net>
For some scenarii, libmudflap is not very usefull
or can break the build. Make in an optioon that
defaults to 'N' to be on the safe side.
For the core gcc-s, there is absolutely no need
to build libmidflap.
Idea from: Bernhard Pfund <bernhard@chapter7.ch>
It seems that using pre-generated locale data can be more problematic
than usefull in some circumstances.
Offer a config knob to enable/disable use of the pregen locale data.
Also, do not extract pregen locales data ourselves, it's broken.
I was unable to make the cross-ldd from uClibc to work, and
it is not possible to build it on non-POSIX system.
Besides, we have a generic script that is in the starting-blocks
to replace it, that will work for any C library, and also will
work on non-POSIX systems. Bonus!
uClibc >= 0.9.30 supports three verbosity levels, according to "make help":
V="" - Quiet build (default)
V=1 - Brief build (show defines, ld flags)
V=2 - Very verbose build
I think older versions of uClibc treat V=2 the same as V=1.
For current uClibc, only V=2 shows the full command lines.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Add several development libraries to the build of the mingw cross-compiler
to be used on target
Libraries:
PDCurses (port of the ncurses library)
GnuRX (the regex library)
DirectX
OpenGL
Signed-off-by: Bart vdr. Meulen <bartvdrmeulen@gmail.com>
[yann.morin.1998@anciens.enib.fr: don't show DX and RX versions if disabled]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add the option to build a cross-compiler for kernel type 'mingw'.
The resulting cross-compiler can be used to build applications on a Linux host
that can be run on a Windows target.
Compiler is build using the mingwrt and w32-api packages aviable from the
MinGW project (http://sourceforge.net/projects/mingw).
The windows headers (w32-api package) are extracting with the kernel_headers
step The libraries and other headers from both packages are build and
installed in the various steps of libc
Signed-off-by: Bart vdr Meulen <bartvdrmeulen@gmail.com>
[yann.morin.1998@anciens.enib.fr: fix kernel headers comment, don't "return 0"]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Accept a local tarball name as the source of the Linux kernel headers,
rather than forcing the user to use either an upstream tarball, or a
local pre-installed headers tree.
Some components have configuration options that can depend on
generic options, so they should go below those.
uClibc for example:
- has its own options (wchar...)
- uses the generic options (threads...)
- if linuxthreads chosen, offers two impls
So we need to be able to split the components options in 2,
one part that is above the generic options, and one part that
ends up below the generic options.
This patch adds support for installing the gcc test suite. A helper
Makefile is provided for building and running the gcc tests.
The default configuration runs all gcc tests and requires automatic
ssh/scp login access to a networked target board. See README for
more details.
Note: Current feature is tested with the powerpc-unknown-linux-gnu
sample but it should work with others as well.
Signed-off-by: Martin Lund <mgl@doredevelopment.dk>
Insight seems to be very slow to follow up on mainstreram gdb.
Latest snapshots are more than 6 months old.
Moreover, I don't have time to maintain insight support in crosstool-NG;
and, because I don't use it, I am unable to find any breakage.
For uClibc, the name of the Blackfin architecture is 'bfin'. Actually,
the naming of the architecture is quite messy: for toolchain tuples
and uClibc, it's bfin, but for the kernel, it's blackfin. We've
arbitraly choosen to name it "blackfin" in Crosstool-NG.
Add Blackfin-related uClibc patch to fix a build failure related to
fork() being used in unistd/daemon.c.
Yann E. MORIN:
Apply the patch to the kernel/linux build script to use 'linux'
in the noMMU tuples. See:
http://sourceware.org/ml/crossgcc/2010-04/msg00010.html
When building a baremetal cross compiler I want to be able to select
the elf format and not be forced to build the elf2flt package.
Signed-off-by: Bart vdr. Meulen <bartvdrmeulen@gmail.com>
[Yann E. MORIN: tweak the commit message]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[Yann E. MORIN: mark it EXPERIMENTAL]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
If threads are disabled in libc, we don't want to enable them in the
final compiler. Doing so pass the configure stage, but fails latter on
a missing <pthread.h>.
Moreover, we don't want to build libgomp if threads are disabled; its
configure script would fails anyway.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Hide the prompts for some behavioral options, for which the upper-layer build
system is responsible for:
- parallel jobs and maximum load
- use pipes
- use custom shell
When crosstool-NG is used as a backend, it is the responsibility of the
upper-layer build-system to properly set paths, so we just hide the
prompts in this case.
sstrip is now alone in its 'tools' menu, and we will probably never gain
any other 'tool'. Besides, sstrip is just strip, but a little bit more
agressive, so it deserves going to the 'binary utilities' menu.
When acting as a backend for a build-system, we should not build
any application that runs on the target, that is:
- no native gdb
- no companion libraries
- no binutils libraries
- no debug tools (save for gdbserver)
- ...
Here, we simply prepare the (hidden) config option that will detect
that we are acting as a back-end.
Update doc accordingly.
The companion libraries on the target are required only for internal use by
binutils and gdb. The user should not have to know about this, so hide the
option.
It's now been a while that glibc switched to git from cvs.
Get rid of cvs to download glibc; this will make for a good
cleanup before we add git support! :-)
It's broken anyway. Eg.:
- user is already niced at 10
- user configures to renice at 5
- breaks because user is not allowed to 'boost' his/her nice value
Bette let the user handle the renice with:
nice -XX ct-ng 'action'
Signed-off-by: Remy Bohmer <linux@bohmer.net>
[yann.morin.1998@anciens.enib.fr: use defaults for CT_TARGET_ARCH]
Signed-off-by: "Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Initial version of adding autoconf as a companion tool.
Signed-off-by: Richard Strand <richard.strand@icomera.com>
[yann.morin.1998@anciens.enib.fr: use generic overide tools dir]
[yann.morin.1998@anciens.enib.fr: update menu entries]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Even if the selected ARCH does not support different bitness (or we do
not support building with another bitness), still select the appropriate
bitness.
This patch adds support for the latest Linux 2.6.32.3 kernel.
Signed-off-by: Joachim Nilsson <jocke@vmlinux.org>
[yann.morin.1998@anciens.enib.fr: keep only one long-term stable]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Note: the MPFR site happens to be down at the time I wrote
this message, and happens to be down quite often.
Once it's back up'n'runnin', I'll mirror as much as possible
the MPFR tarballs on my site, but in the meantime, you'll
have to handle it by yourself (patience...).
From this version of ltrace the maintainer has removed support for
GNU Autotools, so the patch sets needed to be reworked.
Included is the latest Debian patch, by the Debian ltrace maintainer
Juan Cespedes <cespedes@debian.org>, the OpenEmbedded patches for cross
compiling, by Khem Raj <raj.khem@gmail.com> and a further set of patches
by Joachim Nilsson <jocke@vmlinux.org> for crosstool-NG.
aria2 is a powerfull downloader that is capable of chunking and
parallel retrieval.
Due to li;itations in crosstool-NG retrieval facilities, it's not possible
to take fully advantage of aria2. It might happen that, in the future,
those limitations get lifted away, so we can take use features such as
parallel downloading from more than one server at the same time. For now,
it should still speed up downloads thanks to parallel downloading of chunks.
Don't select unneeded config knobs. Don't select non-existing config knobs.
Use the "no patch" config knob, instead of pointing to an non-exiting local
patch dir. Simplify the tuple-related scripts. Update the samples.
Woo... It seems the glibc guys finally decided that tarballs
were not deprecated, in fact.
The patchset was vampirised from Gentoo (kudos, guys!), and
applies to glibc+ports, so that's why it's been added as a
patchset against ports, not against glibc.
Add config option to build wtarget code with THUMB interworking.
This is used to build the C library as well as all other code
that runs on the target.
The newlib "team" rolls new releases about once a year (december).
This is quite a long time between releases, in case code was fixed.
So, allow user to use a CVS snapshot to benefit early from fixes
and enhancements to newlib.
The option to retrieve snapshots is already handled by
the generic 'specific date' and 'use latest' entries.
No need for a special case, as there's no code for it.
The "Build shared libraries" config option is dependant on the type of
"Target OS".
Moving this options to the "Target OS" sub-menu is also better in the user
perspective: he/she no longer needs to go back and forth to see if he/she
missed any option.
ltrace, in the debug sub-menu, selects libelf, in the tools sub-menu.
Inverse the order of the two sub-menus, so that the user does not have
to go back and forth between the two sub-menus.
Move the companion libraries sub-menu down the main menu.
That way, the user does not need to go back and forth in the menu
to change options set by the different components that select the
companion libraries (binutils, gcc, gdb).
Add the WRAPPER_NEEDED silent config option, that can be selected by
components that require it (companion libs so far).
Rely on this config option when deciding to install the wrapper,
instead of checking GMP/MPFR or PPL/CLoog/MPC.
For every components where it makes sense, use bash arrays (instead
of a string with space-separated values) to store the options pased
to ./configure.
Some components (eg. GMP) will fail to correctly build if
the CONFIG_SHELL is not bash (eg. ash or dash). So make bash
the default CONFIG_SHELL.
Keep ash as a possible selection, as future versions of those
currently /broken/ tools may come fixed wrt to CONFIG_SHELL
being POSIX-ly compliant.
It apears that more and more ./configure scripts and Makefiles
make use of non-POSIXly correct shell constructs, that don't
work with ash.
For now, just warn the user against using ash, but keep it as
an option in case newer versions of the /broken/ components
come fixed, and we can again use ash, as it is in some cases
really faster than bash.
In case the shell the user wants to use as CONFIG_SHELL is located in a
weird place (eg. /opt/bash/bin/bash), or is weirdly named (eg. bash-4),
let the user enter the patch to the shell.
Add implementation for a candadian build option already
present in crosstool in order to build a cross-compiler
where build != host != target
Signed-off-by: Bart van der Meulen <bartvdrmeulen@gmail.com>
